Thank you so much! I was able to follow you step by step and it worked! You explained it so much better than the Sawgrass site. Have a very blessed day!
I just received my sawgrass 500 and my magenta won't work. Heat Press Nation had me do several print test and it would work for a day or two and then no printing of magenta. Sawgrass suggested I try this capping station cleaning which is crazy to have to do for a new printer. I'm totally dissatisfied but I'm going to give it a try. Thanks for the video! Needless to say, this will be my one and only Sawgrass purchase.
Thank you. We will try this. We started noticing a spot now and then on a shirt. This cut big time into profit. Couldn't see anything on the paper and thought it might be not enough lint rolling. No matter how much we rolled, still spots. Then started seeing smears on paper. We cleaned the belt (found that info on Sawgrass site), but did not do any of this cleaning. The site didn't mention grease either. Thanks again.
you ever have an issue with the magenta not showing up on the test print? I am so upset my machine just needed more ink and when I put itin I get zero magenta color (no reds pinks etc) help meeeeeee
thanks I'm replacing ink for first time should I clean already but can I wait? Thanks when the time comes to clean it your video was very helpful I got two epsons & they suck!!
I wouldn’t flush the ink out I would just put new ink in on top of the old ink. Why would you want to flush and waste sublimation ink? Did you buy bad or off brand ink?
Thank you for the cleaning guides. I knew about the capping station, but that is it. I have red halos around my black ink on prints and a lot of red inside. Any idea what that is? Maintenance to fix it? Haven’t found an answer and it’s been a year now.
Good afternoon, I have a problem with a Ricoh SG 3110dn printer, it gives me the SC 57000 error, I already cleaned the transfer belt or band with alcohol, I changed the sensor that reads that band and it's still the same, what else can I do? there, I would, And I have two printers for the same reason, or could it be that due to the number of pages that the printer has, it is asking me to change that transfer belt, appreciate your collaboration, thank you
I have no Idea what the issue is. I do not own any of those printers. I would suggest contacting the manufacturer. If it is a sawgrass they will help you as long as you have sawgrass ink in them.
Hey, I don't know if you will read this 2 years later, but following your steps, I started with inserting screwdriver into hole, powering on machine but message appeared, "close upper cover". Now the message won't leave, even with the door closed. What happened?
All printhead solution on Amazon works. Ive ordered several different ones and they are all effective. Find one on amazon with a good price and some good reviews and you are good to go. Promise. Ive used several different types.
I have a SG 500 and I am having to do a head cleaning every day because magenta is not working working right. I opened a ticket with Sawgrass and they told me to flush 5 times. It wasted all my ink😢. I have had it for a year. Will this help?
I promise you the company has way more information than me. I have never had that issue with my machine so I really don’t know. They have probably heard it all, tested it all and tried it all. Sounds to me like the line is clogged and they are trying to help you unclog it. It is unfortunate that you have to waste ink doing it but there is no other way to flush the line than to flush the line.
Thank you for responding and thank you for making this video. I will definitely keep my SG 1000 clean now that you should me how to keep it clean 😊. Just purchased a SG 1000 a few months ago. Hopefully they’ll help me fix my SG 500 🥹
Hey i just came across your channel and im obsessed i love sewing and embroidery and I’m definitely gonna be coming here for help . Do you think you could explain or show how you got the nike logo on your soft wear from your other video,like how you got that picture of the nike tick their for it to be embroided and if their are any similar ones, sorry im new :)
Hey, thanks for watching. I digitized the Nike logo in digitizing software to embroider it for demonstration purposes. th-cam.com/video/JEBIg2cGrRA/w-d-xo.html
@@adubbproductions I need help. My Sawgrass SG 500 is printing pinwheels across my images. I've cleaned my capping station, belts and everything. Sawgrass says to clean the exit guide..??? Where is the exit guide? I need to fix this because I'm loosing money !! Can you help please?!
Is it possible this will help solve banding or pizza cut lines? I’ve watched your other videos and tried everything. The banding only seems to happen only on 11*17 prints.
Hi i have a promlem that its very annoying. So every morning after the night of resting , when i print on my sawgrass there is either yellow or red lines in my prints . It seems like i need to do 3 to 4 prints before it starts to print well . But i dont want to do that because its wasting my ink . And i dont want to keep doing a print head addusnebt or noslzzle clean why does this keep happening
You would need to ask the manufacturer how to solve this. Cleaning the capping station helped me. If it did not help you you should contact sawgrass. They are very helpful and I’m sure they have the answer to your question.
I’m not sure. I’ve never had that issue. Contact sawgrass tech support. They are very helpful. If your printer is under warrantee maybe they might send you out new parts if needed. I’m not sure.
Hey I’ve been having issues with my printer where it doesn’t print color at all. I’ve done head cleanings, did the cleaning on this video and nothing, the nozzle check pattern doesn’t even print completely. And I’m not sure what else to do so if you could help me that would be awesome
Hi can you tell me why the little Alert light goes on in the front panel without any error message on the lcd screen? What does it mean? I’m trying to print on a 4 x 9.5 mug paper. I have the settings as such in the print manager too for my print job but nothing happens. I’ve read the entire 139 pg manual and can’t find anything. It’s The weekend so I’ll be calling tech support on Monday. Hoping this could help your audience if you know the answer, thanks 🙏
@ I didn’t want to leave you hanging… I really don’t know anymore what that was! It’s been too long ago and all things are working fine🤷♀️. Thank you so much for trying to follow up though! 👍💕
For a small fee yes why not. However its probably better to deal with sawgrass tech support. They know more than me. I can’t guarantee shipping it to me would help they can probably give you that guarantee through.
All printers should be cleaned or eventually they will stop printing right. This maintenance along with flushing the lines when needed after a few years of use will extend your printer’s life.
I bought a used 1000 and it gave me the clean the print head error, but the print head doesn’t move, it jiggles in place, i can take the side panel off and move it manually but mine doesn’t have the orange caps on top like yours appears to have. I think I bought a lemon 😭
Unfortunately it sounds like it. Always get them to test out stuff like that in front of you so you know it works or just buy brand new so you can avoid potential headaches like this. I really hope you figure out how to get it to work.
Today I got this crazy error and my printer is dead in the water. sc282-13 I guess indicates clean all heads? I turn on printer and it makes no sounds and my head does not move at all. So I can not even start this process. Is there a way to unlock the head to move it?
I am not sure. If the instructions in this video does not help i would contact sawgrass directly. I’ve reached out before and their tech support is absolutely excellent. As long as you have certified sawgrass ink in your printer you will get the support from them to solve your issue.
@@adubbproductions I put in a support ticket and now will keep fingers crossed. Yes luckily I have all SG ink. I need it to work too! I have a compression sleeve project coming up.
Ive had error messages on my sg500 since I bought it. Sent it back after it broke down and they sent me a replacement, which has also broken down (error messages once again). Probably put less than 10 hours on the first one, maybe 3 hours on the new one. I am over this printer and this company :/
Great content brother, do you know of anyone interested in buying my two sawgrass printers? I got a SG500 (Chromablast) and a SG1000 (Sublijet) brand new. If so let me know 🙌🏽
I hit the like button 30 seconds in. I love the intro! 💜
@@cmhproductions6704 thank you.
Thank you so much! I was able to follow you step by step and it worked! You explained it so much better than the Sawgrass site. Have a very blessed day!
My pleasure. Be blessed.
Thank you for showing every step clear in camera! I appreciate it!
My pleasure. Thank you for watching.
You are amazing. Thank you for the information you so generously provide. You saved my sg500.
My pleasure.
I just received my sawgrass 500 and my magenta won't work. Heat Press Nation had me do several print test and it would work for a day or two and then no printing of magenta. Sawgrass suggested I try this capping station cleaning which is crazy to have to do for a new printer. I'm totally dissatisfied but I'm going to give it a try. Thanks for the video! Needless to say, this will be my one and only Sawgrass purchase.
Very well done, great done explaining the process.
My pleasure.
Thank you. We will try this. We started noticing a spot now and then on a shirt. This cut big time into profit. Couldn't see anything on the paper and thought it might be not enough lint rolling. No matter how much we rolled, still spots. Then started seeing smears on paper. We cleaned the belt (found that info on Sawgrass site), but did not do any of this cleaning. The site didn't mention grease either. Thanks again.
For sure. Glad i could help.
Thanks Allan that's is awesome video and great help.
Hey Carolyn. No problem. Always a pleasure.
Cool man good cleaning I think all Printers should be routinely cleaned
Same here bro. Especially if you want them to last.
you ever have an issue with the magenta not showing up on the test print? I am so upset my machine just needed more ink and when I put itin I get zero magenta color (no reds pinks etc) help meeeeeee
I need the same help
thanks I'm replacing ink for first time should I clean already but can I wait? Thanks when the time comes to clean it your video was very helpful I got two epsons & they suck!!
No need to do this for your first ink change. Maybe after 2 years of use.
Any idea what would cause tiny dotted lines in my prints on a sawgrass 800. I have cleaned the belt that isn't helping
I have small pink lines right now and it seems to be all around the images and sometimes through it.. still searching for the answers
When I print I get like grid lines over the full page. But when I print a test page I get not lines
Do you have sawgrass ink in your printer. It could be because you do not have an authentic sawgrass ink cartridge in the printer.
Thank you so much for this video!
You are most welcome.
Wow so nice absolutely wonderful
My pleasure.
Can you make a video on how to completely flush out all the ink out of the sawgrass 1000.To put new ink in
I wouldn’t flush the ink out I would just put new ink in on top of the old ink. Why would you want to flush and waste sublimation ink? Did you buy bad or off brand ink?
Thank you for the cleaning guides. I knew about the capping station, but that is it. I have red halos around my black ink on prints and a lot of red inside. Any idea what that is? Maintenance to fix it? Haven’t found an answer and it’s been a year now.
I've been having the exact same problem. Tried everything and can't seem to fix the issue. Have you found a solution yet?
This is great info, thxs much Fam
No problem. Glad I could help. Thanks for watching.
Good afternoon, I have a problem with a Ricoh SG 3110dn printer, it gives me the SC 57000 error, I already cleaned the transfer belt or band with alcohol, I changed the sensor that reads that band and it's still the same, what else can I do? there, I would, And I have two printers for the same reason, or could it be that due to the number of pages that the printer has, it is asking me to change that transfer belt, appreciate your collaboration, thank you
I have no Idea what the issue is. I do not own any of those printers. I would suggest contacting the manufacturer. If it is a sawgrass they will help you as long as you have sawgrass ink in them.
Hey, I don't know if you will read this 2 years later, but following your steps, I started with inserting screwdriver into hole, powering on machine but message appeared, "close upper cover". Now the message won't leave, even with the door closed. What happened?
Contact sawgrass. Ive never seen that issue. You possibly have the switch the trips the indicator stuck on the inside.
What is the blue cleaning solution? Do we have to use that?
That is print head cleaning solution. You don’t have to use that exact one I have you can purchase any regular print head cleaning solution.
Thank u
🙏🏾
What brand of solution do u use?
And brand from Amazon would do just fine.
what's the exact cleaning solution you use
All printhead solution on Amazon works. Ive ordered several different ones and they are all effective. Find one on amazon with a good price and some good reviews and you are good to go. Promise. Ive used several different types.
I have a SG 500 and I am having to do a head cleaning every day because magenta is not working working right. I opened a ticket with Sawgrass and they told me to flush 5 times. It wasted all my ink😢. I have had it for a year. Will this help?
I promise you the company has way more information than me. I have never had that issue with my machine so I really don’t know. They have probably heard it all, tested it all and tried it all. Sounds to me like the line is clogged and they are trying to help you unclog it. It is unfortunate that you have to waste ink doing it but there is no other way to flush the line than to flush the line.
Thank you for responding and thank you for making this video. I will definitely keep my SG 1000 clean now that you should me how to keep it clean 😊. Just purchased a SG 1000 a few months ago. Hopefully they’ll help me fix my SG 500 🥹
Hey i just came across your channel and im obsessed i love sewing and embroidery and I’m definitely gonna be coming here for help . Do you think you could explain or show how you got the nike logo on your soft wear from your other video,like how you got that picture of the nike tick their for it to be embroided and if their are any similar ones, sorry im new :)
Hey, thanks for watching. I digitized the Nike logo in digitizing software to embroider it for demonstration purposes. th-cam.com/video/JEBIg2cGrRA/w-d-xo.html
@@adubbproductions I need help. My Sawgrass SG 500 is printing pinwheels across my images. I've cleaned my capping station, belts and everything. Sawgrass says to clean the exit guide..??? Where is the exit guide? I need to fix this because I'm loosing money !! Can you help please?!
Is it possible this will help solve banding or pizza cut lines? I’ve watched your other videos and tried everything. The banding only seems to happen only on 11*17 prints.
Cleaning defiantly helps with banding issues. Yes.
Hi i have a promlem that its very annoying. So every morning after the night of resting , when i print on my sawgrass there is either yellow or red lines in my prints . It seems like i need to do 3 to 4 prints before it starts to print well . But i dont want to do that because its wasting my ink . And i dont want to keep doing a print head addusnebt or noslzzle clean why does this keep happening
You would need to ask the manufacturer how to solve this. Cleaning the capping station helped me. If it did not help you you should contact sawgrass. They are very helpful and I’m sure they have the answer to your question.
How do I unclog printer head my magenta is not printing. Thanks
I’m not sure. I’ve never had that issue. Contact sawgrass tech support. They are very helpful. If your printer is under warrantee maybe they might send you out new parts if needed. I’m not sure.
Where do you find does themes
What themes? Please refresh my memory.
Hey I’ve been having issues with my printer where it doesn’t print color at all. I’ve done head cleanings, did the cleaning on this video and nothing, the nozzle check pattern doesn’t even print completely. And I’m not sure what else to do so if you could help me that would be awesome
I would suggest you contact the manufacturer and take advantage of your warrantee.
Hi can you tell me why the little Alert light goes on in the front panel without any error message on the lcd screen? What does it mean? I’m trying to print on a 4 x 9.5 mug paper. I have the settings as such in the print manager too for my print job but nothing happens. I’ve read the entire 139 pg manual and can’t find anything.
It’s The weekend so I’ll be calling tech support on Monday. Hoping this could help your audience if you know the answer, thanks 🙏
Sorry i am just seeing this. I am sure you figured it out by now if not let me know and ill see what I can find out because i am not sure.
@ I didn’t want to leave you hanging… I really don’t know anymore what that was! It’s been too long ago and all things are working fine🤷♀️. Thank you so much for trying to follow up though! 👍💕
Would you be willing to look at my SG 1000 if I ship it to you?
For a small fee yes why not. However its probably better to deal with sawgrass tech support. They know more than me. I can’t guarantee shipping it to me would help they can probably give you that guarantee through.
Hey wow didnt even know it had to be cleaned 😂
All printers should be cleaned or eventually they will stop printing right. This maintenance along with flushing the lines when needed after a few years of use will extend your printer’s life.
@@adubbproductions Thank you for the tip
No problem Lucy. See the sign in the background. Still absolutely love it.
@@adubbproductions Yes I do it looks really good. Thanks for all the informative videos and helping all of us I appreciate you
Mine has been sitting for 6 months off. The prints are fuzzy and colors are off a bit. Hoping this helps
Mine has sat for longer periods than that. You should be just fine.
I bought a Sawgrass and right out of the box it never printed right the colors are all off and it’s really faded when it prints
It always looks faded when you print but go ahead and press and you might be surprised.
can i use alcohol to clean
I would use printhead cleaner and not just alcohol. I don’t know what effect that would have.
what's up brother I just ran across your channel I would like to talk some business. Hope to hear back from you!
Thank you for tuning in bro. You can reach out at allan@adubbproductions.com
My sawgrass is functional problems. Error occurred SC202-24
Contact tech support immediately.
I bought a used 1000 and it gave me the clean the print head error, but the print head doesn’t move, it jiggles in place, i can take the side panel off and move it manually but mine doesn’t have the orange caps on top like yours appears to have. I think I bought a lemon 😭
Unfortunately it sounds like it. Always get them to test out stuff like that in front of you so you know it works or just buy brand new so you can avoid potential headaches like this. I really hope you figure out how to get it to work.
Today I got this crazy error and my printer is dead in the water. sc282-13 I guess indicates clean all heads? I turn on printer and it makes no sounds and my head does not move at all. So I can not even start this process. Is there a way to unlock the head to move it?
I am not sure. If the instructions in this video does not help i would contact sawgrass directly. I’ve reached out before and their tech support is absolutely excellent. As long as you have certified sawgrass ink in your printer you will get the support from them to solve your issue.
@@adubbproductions I put in a support ticket and now will keep fingers crossed. Yes luckily I have all SG ink. I need it to work too! I have a compression sleeve project coming up.
Ive had error messages on my sg500 since I bought it. Sent it back after it broke down and they sent me a replacement, which has also broken down (error messages once again). Probably put less than 10 hours on the first one, maybe 3 hours on the new one. I am over this printer and this company :/
Sorry to hear that. I have two of them and they have been working great for years. Don’t be defeated. You might have gotten two faulty machines.
Great content brother, do you know of anyone interested in buying my two sawgrass printers? I got a SG500 (Chromablast) and a SG1000 (Sublijet) brand new. If so let me know 🙌🏽
still available?
Okay but you're not answering your phone
Lol. Sorry sister.