@@stevent27 i actually haven't done much due to weather. But i gotta buy a new steering wheel airbag. The cheapest i seen was about 500.00 the seat belt hopefully will be easier. Good luck to you
@@CityNightsBLVD oh got it . Ive been riding with the passenger seatbelt not retracting since may of last year lol just last week i bought the whole new seatbelt assemblyy so ihope they dont charge ode to install it
I'm dealing with the same shit. I feel like I fixed everything but my airbag light is still on. What a waste to total a car just bc an airbag went off. Honda dealer wanted $1200 for the airbag, but I found a garage that sold it to me for $150.... Any advice on airbag?
I'm not sure if you know this, but the reason seatbelts lock up like this is, inside of that seatbelt mechanism there is something called a pretensioner, very similar to the tensioner that you were messing with. The pretensioner is a one use device (like an airbag) that pulls the seatbelt TIGHT against your body once the cars computer system detects an accident. Sometimes the airbags go off with the pretensioner if the crash is bad enough, if the computer thinks the seatbelt is all that's needed, it will only fire the pretensioner. Remember, this is not what you feel when you brake hard, that is the tensioner. Once this pretensioner goes off, you will not be able to retract your seatbelt so whoever is repairing the car knows they need to replace the seat belt assembly. If you still have the car, go to the junkyard and get a belt out of a car that isn't damaged, because even though your tensioner still works, your pretensioner has already been used up. You never know when you'll need that pretensioner. It is designed to keep the forces down on your body in severe collisions by pulling you as tight as it can into the seat before the real forces from the crash kick in (that's why it's called a pretensioner), the regular tensioner doesn't react until the forces are strong enough to lock it up which is sometimes too late for the human body. I hope you end up replacing the whole assembly 😊😊 This is a video on how pretensioners work (all modern cars have them, not just Toyota who makes the video): th-cam.com/video/0jqOOFs9-7o/w-d-xo.html
I had to scroll too far down to find your comment. When I saw the yellow electrical connectors I knew it was part of the supplemental restraint system.
This comment is 1000% correct. ******* ^^^^^ EVERYONE SHOULD READ THIS GUYS COMMENT !!! ^^^^^ ******* and thank you for posting it in a friendly and helpful manor and thank you to the original poster as well for the great video! If you see those bright yellow connectors anywhere they relate to the airbag system.
was just quoted over $700 from the dealer to have my belt replaced. even if i cant fix it myself, I now know how to take it off and can send it in to a company for $50 and have it fixed. thank you so much for the vid!!
Bro thanx for making this video, everybody else that covered the retractor for the 06 civic said you had to break out a grinder to bypass the locking mechanism. This is so much easier and makes alot more sense
@@PoZoLe7113 yeah the same process and the same piece for the retractor. I went to a pick n pull. Just go and pill both sides if you can just in case though
@@CupOfBroseph yeah Might as well try to fix it first because you get to the point where you’re already taking you to court at least try to get it done for free
My (No accident History ever) Honda E 2004 seatbelt had been acting up for some time and would not spool out unless you played with it, and did small moves in-and-out (haha). But then it locked up! Went through several videos, but yours went straight to the point, easy to follow and fixed it like a charm. The olny bummer was when you were shooting putting it back together and your camera was out of focus, but I worked with it and ALL OK! Thanks much!
Hey after removing the side panel you should try rolling the seat belt rotary backwards with your fingers or a flat head before removing those bolts . If it still don't retract then you could take of the seatbelts device . Just one extra step that could save you time ,thanks .
Thanks bro you save a lot of money I don't know shit about cars but I borrow the tools and did it myself and it works perfectly on a 2013 Nissan. Altima
Thanks for the video. That green disk is harder to remove on my 2011 honda element. Though I did notice that small spring fly out once you removed the salmon colored wedgei.. lol. Don't lose it.
I hit a Bambi last week in my 2014 Ford Taurus limited sit belt was working fine after that but that weekend it just stopped working. So this video will help me out a lot over the weekend when I try this
About to try this out myself for my 2011 Infiniti I got into a accident but I got told it’s expensive for this type of fix I will definitely comment back if it worked on mines
My 2012 civic was involved in a small accident and the seat belt deployed and locked also lighting up the airbag light on the dash. To fix this issue 2 necessary steps are needed, 1st either replace your seatbelt with a good working one or send it to safety restraints company that rebuilds them they have to be charged with gas so that they can deploy the next time you're involved in an accident , step 2 you have to reach to your SRS module which is buried below the dash infront of the transmission lever onto the lower body panel and send it along with the seatbelt to the safety restraints they are the ones who can clear the crash data from the module then once this is done the airbag light will turn off, this is the correct way to do it. Nice video content but I also noticed your driver seat airbag is deployed what did u do about this ? This also has to be replaced for maximum safety alotherwise your airbag light will stay ON.
Joseph Gallego She is just fine. The nose of the car dipped underneath the car in front of her, and Yep it was her fault, but only the bumper and the license plate frame was damaged. Maybe $1500 with the damage. All is good and thanks again for your video, it really helped a lot
My 04 Avalon was in an accident yesterday morning. Nothing major but my seatbelts locked up. We tried this process but it didn't work for us. Great video nonetheless however
I have a 2002 Buick Park Avenue where the front driver side seat belt is in the seat next to the head rest. I can't pull the seat belt out. Is this repairable? The car has not been in an accident. Is there a video on an 2002 Park Avenue on seat belt repair? Your video was helpful.
Mine is a 09 Civic coupe, seem a little different, it has some loose metal balls inside rolling around. I opened every screws all the way, only manage to make belt held longer out, but it won't retract. btw, I remove all 4 metal balls and threw it away.
Hello, I really enjoyed your video! Very informative. Can you please help me? I have a 2008 Toyota Highlander that has a cut seat belt on the left rear passenger seat, (was purchased with the problem,) how can I remove the covers to get to the belt inside, to hopefully stitch the two pieces together with upholstery thread. Any help and videos if possible would be appreciated!
HI you make it very easy to fix the seat belt i am looking for someone to fix my belt it is lock can you recomend some one to help me with my seat belt i alive in brooklyn
Will i have to do this procedure? Someone run into me deployed airbag now seatbelts r locked and i can't fasten up don't wanna get fine for no seatbelts on any ideas or will this procedure work?
Just got into an accident last night. Car works perfectly fine but the airbags went off and seatbelt wont retract. Thanks for this video.
Im in the same situation right now . Did u fix it like in this video?
update
@@stevent27 i actually haven't done much due to weather. But i gotta buy a new steering wheel airbag. The cheapest i seen was about 500.00 the seat belt hopefully will be easier. Good luck to you
@@CityNightsBLVD oh got it . Ive been riding with the passenger seatbelt not retracting since may of last year lol just last week i bought the whole new seatbelt assemblyy so ihope they dont charge ode to install it
I'm dealing with the same shit. I feel like I fixed everything but my airbag light is still on. What a waste to total a car just bc an airbag went off. Honda dealer wanted $1200 for the airbag, but I found a garage that sold it to me for $150.... Any advice on airbag?
I'm not sure if you know this, but the reason seatbelts lock up like this is, inside of that seatbelt mechanism there is something called a pretensioner, very similar to the tensioner that you were messing with. The pretensioner is a one use device (like an airbag) that pulls the seatbelt TIGHT against your body once the cars computer system detects an accident. Sometimes the airbags go off with the pretensioner if the crash is bad enough, if the computer thinks the seatbelt is all that's needed, it will only fire the pretensioner. Remember, this is not what you feel when you brake hard, that is the tensioner. Once this pretensioner goes off, you will not be able to retract your seatbelt so whoever is repairing the car knows they need to replace the seat belt assembly. If you still have the car, go to the junkyard and get a belt out of a car that isn't damaged, because even though your tensioner still works, your pretensioner has already been used up. You never know when you'll need that pretensioner. It is designed to keep the forces down on your body in severe collisions by pulling you as tight as it can into the seat before the real forces from the crash kick in (that's why it's called a pretensioner), the regular tensioner doesn't react until the forces are strong enough to lock it up which is sometimes too late for the human body. I hope you end up replacing the whole assembly 😊😊
This is a video on how pretensioners work (all modern cars have them, not just Toyota who makes the video):
th-cam.com/video/0jqOOFs9-7o/w-d-xo.html
This is great information! Picking up an assembly from the junkyard is good idea too. Thank you
I had to scroll too far down to find your comment. When I saw the yellow electrical connectors I knew it was part of the supplemental restraint system.
This comment is 1000% correct. ******* ^^^^^ EVERYONE SHOULD READ THIS GUYS COMMENT !!! ^^^^^ ******* and thank you for posting it in a friendly and helpful manor and thank you to the original poster as well for the great video! If you see those bright yellow connectors anywhere they relate to the airbag system.
I did exactly what this video showed and its still locked. So you are correct.
Thank you! I was about to tear my car up for nothing 😁 Glad i read this
I GOT SO MAD FOR A SECOND 😂 i'm glad it worked
Lmaooo I was like WTF!
was just quoted over $700 from the dealer to have my belt replaced. even if i cant fix it myself, I now know how to take it off and can send it in to a company for $50 and have it fixed. thank you so much for the vid!!
What company can this be sent too??
I viewed this video and removed Only the panel with the seatbelt. Everything worked out perfectly.. Thanks great video!
Great camera angles simple short straight to the point this deserved a like
Bro thanx for making this video, everybody else that covered the retractor for the 06 civic said you had to break out a grinder to bypass the locking mechanism. This is so much easier and makes alot more sense
Thanks man, it's a pleasure. Awesome name by the way
Damn, i have a 06 civic too with the same problem 🥲 how did it work out for you?
Do you know if this will work on a 2008 Honda Civic? Please let me know thank you
Fr
“So the other night, some moron ran into my car... ” 😂😂😂
I bet everyone can relate to that sometime in there life lol
Probably didn’t have any brake lights
Sweet. Nice work my dude. Love watching randon yt vids on how to fix the things I dont know how to do instead of spending hundreds on repairs.
I appreciate the feedback, thank you!
This is what I was looking for
I warched this with on mute and still understood exactly what to do. Wonderful.
Do u know if it’s the same process for the passenger side ?
@@PoZoLe7113 yeah the same process and the same piece for the retractor. I went to a pick n pull. Just go and pill both sides if you can just in case though
This video is literally a best case scenario.
Next case scenario, pick up the same part from a local scrap yard.
@@CupOfBroseph yeah Might as well try to fix it first because you get to the point where you’re already taking you to court at least try to get it done for free
Repair shops are gonna be so mad. Nice work. Can't afford a repair job. Gonna do this when I get off work
Haha #diy for life
You had me at the end for a second. Good laugh, nice work brother.
My (No accident History ever) Honda E 2004 seatbelt had been acting up for some time and would not spool out unless you played with it, and did small moves in-and-out (haha). But then it locked up!
Went through several videos, but yours went straight to the point, easy to follow and fixed it like a charm. The olny bummer was when you were shooting putting it back together and your camera was out of focus, but I worked with it and ALL OK! Thanks much!
I laughed 😅 at the end when you made it seem like the belt was stuck. Thanks, for this video 📹 much needed.
Hey after removing the side panel you should try rolling the seat belt rotary backwards with your fingers or a flat head before removing those bolts . If it still don't retract then you could take of the seatbelts device . Just one extra step that could save you time ,thanks .
Wow, I am all for saving time, thanks Jose!
And just think how much money was saved in this DIY video.
Thanks for posting
Great job👍🏼
Very helpful…Finally i can use my seatbelt again.. thanks
Thanks bro you save a lot of money I don't know shit about cars but I borrow the tools and did it myself and it works perfectly on a 2013 Nissan. Altima
Bro!! Thank you so much for posting!!! You saved me a few hundred dollars!👊🏾❤️
so your life isnt worth a few hundred dollars?
@@bjorn1583corny aren’t you
@@thomasharris5151 nope, just logical.
seatbelts are a one use only safety device, when it has done its purpose it MUST be replaced
Thank you so much. It worked for me, specially because I own a Honda (Accord, 2011) and I'm a newbie in handling this kind of stuff.
Great video! I tried to look at others but none showed what I needed and most of them were shops!! You showed me exactly what I needed! Thanks
Thanks for the help have a friend from work that got in a accident and I should be able to get it fixed for her now thanks again
I'm sorry about your friend's accident. I hope everything turns out okay.
Thanks for the video. That green disk is harder to remove on my 2011 honda element. Though I did notice that small spring fly out once you removed the salmon colored wedgei.. lol. Don't lose it.
Lost mine lol.
Thanks bro this fixed my 05 mustang belt is the same inside. worked like a charm.
Awesome! I am glad this video could help.
Thank u, no other video went this far in detail! Fixed :)
I was gonna be so mad if all that didn't fix the seatbelt lol...
😂 he got me too I laughed it was worth a like for sure
Well...... better to try than not. Having money fixed everything without headache 😅
Were you able to clear the permanent DTC code that the SRS module threw after doing this?
I hit a Bambi last week in my 2014 Ford Taurus limited sit belt was working fine after that but that weekend it just stopped working. So this video will help me out a lot over the weekend when I try this
hey did it ever work for you ?
About to try this out myself for my 2011 Infiniti I got into a accident but I got told it’s expensive for this type of fix I will definitely comment back if it worked on mines
Worked on my 2006 honda accord !! Thanks so much 🙏
My pleasure!
This works for me with one of two stuck seat belts, the other one seems to have a second locked mechanism that I need to figure out :) Thanks, bro..
Did you ever find out how to unlock 2nd belt
You are....THE MAN ! 👍👍👍😎
My 2012 civic was involved in a small accident and the seat belt deployed and locked also lighting up the airbag light on the dash. To fix this issue 2 necessary steps are needed, 1st either replace your seatbelt with a good working one or send it to safety restraints company that rebuilds them they have to be charged with gas so that they can deploy the next time you're involved in an accident , step 2 you have to reach to your SRS module which is buried below the dash infront of the transmission lever onto the lower body panel and send it along with the seatbelt to the safety restraints they are the ones who can clear the crash data from the module then once this is done the airbag light will turn off, this is the correct way to do it.
Nice video content but I also noticed your driver seat airbag is deployed what did u do about this ? This also has to be replaced for maximum safety alotherwise your airbag light will stay ON.
Excellent information and observation, I intend to replace the seat entirely.
Thank you!! Life saver vid for urgent repair
Did it work?
This video is a lifesaver ..thank you so much
Wow I thought I had to buy new seatbelts. I’ll try this. Thx.
I’m glad I saw this I don’t have to buy new sealbelts
Best seatbelt repair video. Thank you
thank you ! I got mine working
great tutorial....step by step directions....and it worked !!!!
Good stuff! My daughter’s car was just involved in an accident. I used your video and done!!!!
I hope everyone was okay.
Joseph Gallego She is just fine. The nose of the car dipped underneath the car in front of her, and Yep it was her fault, but only the bumper and the license plate frame was damaged. Maybe $1500 with the damage. All is good and thanks again for your video, it really helped a lot
I am glad to know she is fine. It is my pleasure to help.
Great video. How do I know which side is the one I need t o open on my Toyota Highlander 2021?
I owe this man a beer worked perfect 👍👍
🍻
Finally I found the video that I was looking for
bruh i thought it was Aziz Ansari narrating lol, good vid
Lol, thank you
Thanks so much for the help! I thought I was gonna have to get a new seatbelt lol
Trying this Tuesday 🔥🙏🏼 tx
did it work?
That seat belt will work without pretensioner explosion?
Do you know if this same procedure can be applied for a 2014 elentra GT? Great video BTW!!!
i missed it, how do you get the shiny part adjusted before the green piece comes off, after the pinsare hammered out
WOW. That's amazing. Could you kindly help me with my seatback unlock please?
They wanted $570 + tax etc at the local stealership
Thanks for the great videp
I live in tampa and YUP perfect video for me
I tried turning my disc clockwise but it won’t budge. Mine also sounds like there’s stuff broken inside of it. Is mine officially done for?
same here
Very good amazing explanation thank you bro 🤣
Thank you so much!! Stay safe!!!
My 04 Avalon was in an accident yesterday morning. Nothing major but my seatbelts locked up. We tried this process but it didn't work for us. Great video nonetheless however
Thank you, I hope everyone was okay.
So this unlocked the seat belt and wound it back up but now it won't pull out. Does it need to be put back together to do that? great video btw
I have a 2002 Buick Park Avenue where the front driver side seat belt is in the seat next to the head rest. I can't pull the seat belt out. Is this repairable? The car has not been in an accident. Is there a video on an 2002 Park Avenue on seat belt repair? Your video was helpful.
Would this also work for a Dodge Challenger 2015 rt
Thats what i want to know
I'm gonna hope this will work on my 2011 HHR.
I'm happy it worked 😊☺️
I tried turning it clockwise but it won’t budge. It’s a 2017 accord. Any tips?
What did you do? 🤔 like to know
@@thomasharris5151 what did you do mine is not working either
What did you do mine is not working either?
good Job! does this procedure also work on a 2014 honda crv ex? front driver seat belt locked up! thanks.
Hi, I also have a Honda CR-V. I was reading your comment and wondering if this worked for you?
Mine is a 09 Civic coupe, seem a little different, it has some loose metal balls inside rolling around. I opened every screws all the way, only manage to make belt held longer out, but it won't retract. btw, I remove all 4 metal balls and threw it away.
For those whose seatbelts still kept getting stuck just remove the small block thing with the ball inside it and it should unlock the seatbelt.
it’s still locked
Hello, I really enjoyed your video! Very informative. Can you please help me? I have a 2008 Toyota Highlander that has a cut seat belt on the left rear passenger seat, (was purchased with the problem,) how can I remove the covers to get to the belt inside, to hopefully stitch the two pieces together with upholstery thread. Any help and videos if possible would be appreciated!
Going to give it a try tomorrow
Great, will this work on my Toyota Highlander 2021?
Did your rear seatbelts lock and how do you remove them? 🤔
Great video. Thank you
Thank you Joseph
Did you have to reset the airbag light? or did it go away by itself?
Did you ever find the answer to this? I havethe same issue
Perfect video thanks 🙏
My pleasure.
Great video! Thank you so much!
Thanks you man
My son popped the spring out behind the seafoam green disc n can’t find. Do u know size?
Can you also make a video how u put the pieces together close up because I feel like I’m doing sum wrong Nd it’s not retracting still
Help! Mayday! Mines is still locked any suggestions? I tried doing it clockwise but it's still jammed😩
❤ thank you dude you rock
Will this work on a dodge advenger?
HI you make it very easy to fix the seat belt i am looking for someone to fix my belt it is lock can you recomend some one to help me with my seat belt i alive in brooklyn
I’m going to try this on my 09 accord
Any chance this method will work for a Lexus GX470 or other Toyotas?
Would this process be the same for the front passenger seat ?
Great video. But when you were working on the salmon colored strip and stuff, your camera went out of focus. Drat!
Do all seatbelts are fixable or do you have to get a new one installed
Will this work if your airbags went off in the car?
Will i have to do this procedure? Someone run into me deployed airbag now seatbelts r locked and i can't fasten up don't wanna get fine for no seatbelts on any ideas or will this procedure work?
Nice work. Thanks
Thank
Hmmm... I will be trying this tomorrow!
A lot of car manufactures offer free fix for seatbelt due to liability. You can check with your local dealer
How do you reassemble the blue plastic piece?
thanks
Thanks Joseph 🤝
My pleasure Alex
I did it, works but takes a while, keeps hanging. Now the back doors will not stay locked, did I do something to them when I was doing the seatbelt
You’re the best
I hope this works I’m gonna try it tomorrow