To the guys out there that do DPF; EGR;AD BLUE Delete please stop if there is a engine management light on there is a root cause to a problem find it and repair it properly don"t just take a quick buck of a punter because you have a expensive machine.Jimmy huge respect for the video and for taking on a job that someone else has been at personally myself I would have knocked it back 👍
So explain to the customer that he won’t be able to use his car for a month because main dealer doesn’t even have parts in stock for example NOX sensors , or explain to the van owners that need to work every day !!!
I'm a dpf engineer also seen this way to many times a lot of people use the wrong software to map adblue out but also delete the software for the dpf aswell
@alanbrand7681 had many jobs like that and what I advise is I always clean the dpf and when pressures are all ok I advise customer to bring vehicle back to where adblue delete was done and then go back over what was done with the software. There's nothing wrong with adblue delete if its done correctly with the correct software and the proper sensors are muted. To many people get the mickey mouse software off ebay and balls the job up
I had adblue delete and remap last November and have noticed that the dpf warning symbol no longer appears, I have checked the pressure and it is low, 15 hpa and 38, so I'm not sure it's regenerating, should I try a forced regen?
Hi, I had the same issue. You have a video uploaded about my vehicle as well. I deleted the Nox sensor. This car doesn’t like deleting program the best way to go around. It is to re-program it again and solution will fix itself. Then fix the blue system. This car needs the ad blue to do regeneration. On the other side, if he needs to keep the program deleted program, he needs to remove the DPF as well or else you will have the problem constantly To fix my car, I put everything back as it was by the manufacturer. I took the hit of the cost to get the car back running. And by the way, thanks for your advice to one of the garage in Luton ,The result came out well thank you once again
I had that exact problem with the same car, noticed the adblue was remapped out also and only thing I could put it down to was a software issue with the remap, unfortunately don't have a definite conclusion but I thought the same 🙈 think that more so now you've had the same issue!
I have done adblue deletes on 8 of these cars e220d w213 ecu md1cp001 and I always do regens after every single job to confirm it reaches 600 degrees and where some other tuners failed to understand as SCR & DPF are in block of software which needs manual solution. So its the bad scr off remap caused this dpf issues. London based happy to help if needed.
@@mrvf83 you could check with any scanner read the dpf regeneration history, how long(miles) ago was the last successful took place, if it happened recently then your dpf fill level should be under 50% to 70%, soot grams must be under 8grams. And if you trigger the dpf regeneration the exhaust temperature should go past 500 degrees.
Check if the Adblue ecu is disconnected in the boot , if it’s not disconnected it won’t do the regen , if. It’s disconnected ADBLUE solution is not correct
Not a good idea to even attempt an AdBlue delete remap on any vehicle with an AdBlue system. It will throw everything off and cause many issues. This here is proof. Dont mess with Software, just fix the hardware fault.
if it is anything to do with the SCR then the SCR would need to depend on the ad-blue. If you want to regenerate the DPF with SCR together, the the ad-blue would need to be working I believe. I always believed the SCR needed adblue to do its job.
Mapping done wrong.Needs to go remap same soft but fallow special procedure. I had several vech like this done by me and come back with this problem. All fixed and happy without adblue and any problems. Goodluck
If the car design with AdBlue... dann probably the regan will try to activate the AdBlue program because it's necessary for regen. When this software is deleted... dann probably the regen program will not get a feedback from the AdBlue program and therefore will not try to regen. Also... The AdBlue make that regen need a lower temperature. By cancelling the AdBlue it's possible that the temp will be anyway to low because the car hat design with AdBlue in mind.
100% that ad-blue delete has messed with the regen side of things. Usually, the remapper would remove or knock a hole in the dpf to prevent it from blocking up!
Just a thought, my Renault Trafic will only get to circa 300 degrees if it exceeds 400 miles of regens, I assume it's because of the oil dilution as it works again when I reset this.
I believe that the main issue with this car is it got the Adblue system delete as the temp. of the DPF is measured by the NOX sensor,so if it's deleted it will cause an issue with the whole system not only Adblue
Sounds like Mercedes have put some software in the ECU that recognises it has been mapped and switches of the regen function off as a way of getting you back to the dealer or stop driving your car. Just a thought?
Hi all jimmy, you said on the video that if you did a software update it would re right the ecu is that possible and can the euro tab 3 do that software update. Regards
Same car, same problem, same Ad Blu remap out. Spoke to Mercedes and as soon as I said Adblu mapped out he said it won't regen without Adblu. Gonna clean the Adblu injecter and Dpf (again) and get Adblu map reversed.
@@nathanreid2974 well if you clean injector it won't happen because the emissions will be ok. Mostly the injector for adblue starts to block around 20k, not completely but enough to block the flow to the cat which will then cause higher emissions then the more adblue it will try to inject
I’m have the exact same issue on a 17 e200 I work in merc dealer and only I see at this moment is upstream dpf temp sensor is very slow to react first one I’ve seen at this crac
Bad file or they have not followed the remap instructions. AdBlue resets must be done before the remap takes place on this and many other vehicles are the same, AdBlue ECU must be disconnected, If not I believe fuse 409 (15 amp) in the boot on this vehicle needs pulling out for the AdBlue ECU. Maybe a novice has remapped this.
You must Stress the powertrain with Manual often shifting Up and down.. accleration and declaration! and maybe Ducktape and thick paper Kartonage depends on outside Temp. ! All If possible electronice devices on ( heating rear window etc., Lights on.. ) Show that the underfloor capsle Panels are tight and nothing or so e Panels are not on the car. You must raising the hole Temp. and looking to Link for a better Hardware and Software for example .. a second Person must during the Heat Up Phase driving readout , delete and than again read Out (No fault If possible and No Points or DPF Point on..) than kick on and activate the Recircle Clean kick on via obd tool ! And all during the Drive If possible sometimes you can Drive beside and do IT your kwn If allone with obd row Till Point of kick on Button Push that must you do during driving or rolling Rolls If you have a engine rolling stand.. .. and Drive accleration than to reach those or Higher Temp. Like short time before to do doings. And read understand the complexety those cheap and cheapest tools are more and more Kick Off from manufactures step by step cause to many looking Professional Gear on Market and in Hands . Some Semi Professional Like you , me , some Prof. Like Engineer and Developer , Construction Engineer.. but to many Amateur and silly people they mean they can do it. And buying step by step wrong Gear cause they must looking over the Edge and over Horizont to get a truth good... Never do that again during staying Rev. Without Wind blower on Power roll room or at parking. Everytime IT must BE during rolling Phase during Drive Kicks on cause the hole engine rlom must Heat Rally high Up .... I need in 90% cases No obd tool to start kick on regenartion Phase. Testdriver Stress Test Drive skills flush the car with knowlegde and how to cook Up the water and oil ( or you cooking at Home with No Gas and electric and No fire , No Vibration into water to cook Up egg?!) If car Not doing i will i took IT into Judo Typ of Action to Put Heat into my opinion ! To IT Like a Professional or Walking on Same place.LEARNING IS GOOD AND TO GIVE Audienz YOUR Level to improve your kwn. Respekt and greetings from Europe Mainland ..
My Peugeot 3008 uses pat fluid.and As you know that injects into the fuel so the soot in the dpf burns at lower temps. Maybe that the only option for this is to manually put small amounts of pat fluid in the fuel to overcome this issue. It's not a fix but a remedy that may keep the dpf good??? What do you think Jimmy?
Just bought a e220d same engine, then realised it also had AdBule remap… Removed it and put the newest software from mercedes on it… now i have the same problem and no one can tell whats wrong… Car was now three weeks at the mercedes dealership and they still don’t know. Anyone here have an idea?
Olá tenho um mercedes taxi esse mesmo modelo com o mesmo problema depois da atualização deixou de atingir a temperatura no escape e não faz a regeneração,,,
It's expensive to maintain. Nox sensors fail yearly at £300-500 each. Nox efficiency codes can set you back up to £5,000 I've seen. Adblue pump another £800-1500
@@ORileysAutos I thought it was just the cost of the AdBlue. That cost is just mad, no wonder people are giving AdBlue the flick. There must be someone out there that can design something to sort it out. My only experience is with prime movers , mining equipment and the like, don't have much trouble with AdBlue, only when someone runs the tank dry.
Its not reaching temperiture… (was this an auto).. Thoughts!!, is it the case he is driving it in low REVs (below 3000h) or needs at least 1/2 Tank of Diesel (or auto box is set too low). Isnt it the case that you need to drive a diesel like the police are chasing you … occassionally.. otherwise, i would just factory reset with software
I had this exact issue. I had adblue delete and it was failing to regenerate after doing more local journeys. In the end the dpf would just gain soot after a regen. I deleted the dpf in the end. I found the adblue filter gets clogged to crap when I saw the internal adblue filter (right next to the dpf filter) in the bigger canister. I’d suspect it’s due to the adblue being deleted but I was fine when doing motorway journeys. When local issues occurred. I’d recommend deleting dpf leaving in cat and doing a remap. Other than that they’re better off just sending it main dealer. The emissions system is shit on these. One last thing I’d recommend, sometimes once these ecu’s are mapped, they may not carry out resets correctly. When you registered a new dpf, did your ash level/ soot level reset? It may have to have the original map file put on, resets to be carried out and then re -remapping. I found that is a cause for issues too.
Hi mate, You might be able to help me out... I have a BMW and I can't get it to regenerate as the dpf doesn't reach the temperature ..it starts the regeneration but stays at 300....but if I force regeneration it will reach 600. After forced regeneration the soot level increases quickly basically wants to regenerate every 30miles. Your answer would be much appreciated
Sounds like it needs the adblu to reach temp? I suppose if someone was really clever they could adjust the parameters in the ecu to trick it into thinking the dpf is hot enough.. who knows..not me..😅
Waste of money mapping out only adblue, get rid of the dpf and egr, your engine will thank you. Keep the cat and will still pass MOT easily especially if on an eco map 👍
To the guys out there that do DPF; EGR;AD BLUE Delete please stop if there is a engine management light on there is a root cause to a problem find it and repair it properly don"t just take a quick buck of a punter because you have a expensive machine.Jimmy huge respect for the video and for taking on a job that someone else has been at personally myself I would have knocked it back 👍
So explain to the customer that he won’t be able to use his car for a month because main dealer doesn’t even have parts in stock for example NOX sensors , or explain to the van owners that need to work every day !!!
@@BeautifulMind1981 Fair point.
Bit of a stupid system but that's Mercedes.
@BeautifulMind1981 if the parts are not available, not our problem. Can't magic them out of thin air!
Imo, repair the vehicle properly or not at all.
@@lgrasso5531 i hope some day u will be in that kind of situation and then we will see if it’s not your problem
@BeautifulMind1981 been there many times.....
I'm a dpf engineer also seen this way to many times a lot of people use the wrong software to map adblue out but also delete the software for the dpf aswell
Soon as i heard the software messed about with i wouldnt have took the job
@alanbrand7681 had many jobs like that and what I advise is I always clean the dpf and when pressures are all ok I advise customer to bring vehicle back to where adblue delete was done and then go back over what was done with the software. There's nothing wrong with adblue delete if its done correctly with the correct software and the proper sensors are muted. To many people get the mickey mouse software off ebay and balls the job up
I had adblue delete and remap last November and have noticed that the dpf warning symbol no longer appears, I have checked the pressure and it is low, 15 hpa and 38, so I'm not sure it's regenerating, should I try a forced regen?
Great 👍 to see you back Jimmy and Great to see you doing what you do best Jim 👌
You should change the headline Jimmy to "why not to do AdBlue remap Mercedes E Class 2.0 Euro 6".
More euro 6D temp
Hi, I had the same issue. You have a video uploaded about my vehicle as well. I deleted the Nox sensor. This car doesn’t like deleting program the best way to go around. It is to re-program it again and solution will fix itself. Then fix the blue system. This car needs the
ad blue to do regeneration.
On the other side, if he needs to keep the program deleted program, he needs to remove the DPF as well or else you will have the problem constantly
To fix my car, I put everything back as it was by the manufacturer. I took the hit of the cost to get the car back running.
And by the way, thanks for your advice to one of the garage in Luton ,The result came out well thank you once again
Yep thought so thats probably because of the SCR part of things
No it doesnt, adblue and dpf are not connected mechanically at all. All it is, is wanna be tuners who dont know what they are doing.
I had that exact problem with the same car, noticed the adblue was remapped out also and only thing I could put it down to was a software issue with the remap, unfortunately don't have a definite conclusion but I thought the same 🙈 think that more so now you've had the same issue!
I have done adblue deletes on 8 of these cars e220d w213 ecu md1cp001 and I always do regens after every single job to confirm it reaches 600 degrees and where some other tuners failed to understand as SCR & DPF are in block of software which needs manual solution. So its the bad scr off remap caused this dpf issues. London based happy to help if needed.
I am having same issue, where you based just removed NOX sensor system and now car struggle to speed up and cant go over 70 MPH dont know what to do
@@Rajafaizee North West London (Watford).
Is there any way to test if delete do it right?
@@mrvf83 you could check with any scanner read the dpf regeneration history, how long(miles) ago was the last successful took place, if it happened recently then your dpf fill level should be under 50% to 70%, soot grams must be under 8grams. And if you trigger the dpf regeneration the exhaust temperature should go past 500 degrees.
@@bavi-auto-solutions can u give me whatsapp number? :)
Check if the Adblue ecu is disconnected in the boot , if it’s not disconnected it won’t do the regen , if. It’s disconnected ADBLUE solution is not correct
Not a good idea to even attempt an AdBlue delete remap on any vehicle with an AdBlue system. It will throw everything off and cause many issues. This here is proof.
Dont mess with Software, just fix the hardware fault.
Or just get someone to do the adblu delete properly.....
No issues with good adblue solution but I’ve seen this a few times my self. Early solution using ecu decoder this was very common
if it is anything to do with the SCR then the SCR would need to depend on the ad-blue.
If you want to regenerate the DPF with SCR together, the the ad-blue would need to be working I believe.
I always believed the SCR needed adblue to do its job.
Mapping done wrong.Needs to go remap same soft but fallow special procedure.
I had several vech like this done by me and come back with this problem.
All fixed and happy without adblue and any problems.
Goodluck
If the car design with AdBlue...
dann probably the regan will try to activate the AdBlue program because it's necessary for regen.
When this software is deleted... dann probably the regen program will not get a feedback from the AdBlue program and therefore will not try to regen.
Also...
The AdBlue make that regen need a lower temperature.
By cancelling the AdBlue it's possible that the temp will be anyway to low because the car hat design with AdBlue in mind.
100% that ad-blue delete has messed with the regen side of things. Usually, the remapper would remove or knock a hole in the dpf to prevent it from blocking up!
Just a thought, my Renault Trafic will only get to circa 300 degrees if it exceeds 400 miles of regens, I assume it's because of the oil dilution as it works again when I reset this.
I believe that the main issue with this car is it got the Adblue system delete as the temp. of the DPF is measured by the NOX sensor,so if it's deleted it will cause an issue with the whole system not only Adblue
you are joking rigth?
Sounds like Mercedes have put some software in the ECU that recognises it has been mapped and switches of the regen function off as a way of getting you back to the dealer or stop driving your car. Just a thought?
how does it reach temp? glowplugs, or increased fuel?
probably boath and or vaporiser.
Hi all jimmy, you said on the video that if you did a software update it would re right the ecu is that possible and can the euro tab 3 do that software update. Regards
great video jimmy
Same car, same problem, same Ad Blu remap out. Spoke to Mercedes and as soon as I said Adblu mapped out he said it won't regen without Adblu. Gonna clean the Adblu injecter and Dpf (again) and get Adblu map reversed.
Mapping out the adblue on these newer systems is a no go, i know on my 2021 caddy is regenerating the adblue is working overtime
is there sines to let you know the ad-blue works overtime, do you smell it
@@nathanreid2974 well if you clean injector it won't happen because the emissions will be ok. Mostly the injector for adblue starts to block around 20k, not completely but enough to block the flow to the cat which will then cause higher emissions then the more adblue it will try to inject
I’m have the exact same issue on a 17 e200 I work in merc dealer and only I see at this moment is upstream dpf temp sensor is very slow to react first one I’ve seen at this crac
Bad file or they have not followed the remap instructions. AdBlue resets must be done before the remap takes place on this and many other vehicles are the same, AdBlue ECU must be disconnected, If not I believe fuse 409 (15 amp) in the boot on this vehicle needs pulling out for the AdBlue ECU. Maybe a novice has remapped this.
You must Stress the powertrain with Manual often shifting Up and down.. accleration and declaration! and maybe Ducktape and thick paper Kartonage depends on outside Temp. ! All If possible electronice devices on ( heating rear window etc., Lights on.. ) Show that the underfloor capsle Panels are tight and nothing or so e Panels are not on the car. You must raising the hole Temp. and looking to Link for a better Hardware and Software for example .. a second Person must during the Heat Up Phase driving readout , delete and than again read Out (No fault If possible and No Points or DPF Point on..) than kick on and activate the Recircle Clean kick on via obd tool ! And all during the Drive If possible sometimes you can Drive beside and do IT your kwn If allone with obd row Till Point of kick on Button Push that must you do during driving or rolling Rolls If you have a engine rolling stand.. .. and Drive accleration than to reach those or Higher Temp. Like short time before to do doings. And read understand the complexety those cheap and cheapest tools are more and more Kick Off from manufactures step by step cause to many looking Professional Gear on Market and in Hands . Some Semi Professional Like you , me , some Prof. Like Engineer and Developer , Construction Engineer.. but to many Amateur and silly people they mean they can do it. And buying step by step wrong Gear cause they must looking over the Edge and over Horizont to get a truth good... Never do that again during staying Rev. Without Wind blower on Power roll room or at parking. Everytime IT must BE during rolling Phase during Drive Kicks on cause the hole engine rlom must Heat Rally high Up .... I need in 90% cases No obd tool to start kick on regenartion Phase. Testdriver Stress Test Drive skills flush the car with knowlegde and how to cook Up the water and oil ( or you cooking at Home with No Gas and electric and No fire , No Vibration into water to cook Up egg?!) If car Not doing i will i took IT into Judo Typ of Action to Put Heat into my opinion ! To IT Like a Professional or Walking on Same place.LEARNING IS GOOD AND TO GIVE Audienz YOUR Level to improve your kwn. Respekt and greetings from Europe Mainland ..
Great video👍 I am very anti remap or delet's on any component or system .This only ends up with problems that cannot be resolved .
Agree with you
Jimmy on the merc forum there,s plenty of people who say shitty adblu delete
My Peugeot 3008 uses
pat fluid.and As you know that injects into the fuel so the soot in the dpf burns at lower temps. Maybe that the only option for this is to manually put small amounts of pat fluid in the fuel to overcome this issue. It's not a fix but a remedy that may keep the dpf good??? What do you think Jimmy?
Just bought a e220d same engine, then realised it also had AdBule remap…
Removed it and put the newest software from mercedes on it… now i have the same problem and no one can tell whats wrong…
Car was now three weeks at the mercedes dealership and they still don’t know.
Anyone here have an idea?
Olá tenho um mercedes taxi esse mesmo modelo com o mesmo problema depois da atualização deixou de atingir a temperatura no escape e não faz a regeneração,,,
Will this read mercs with a security gateway??
Hi Jimm
The Adbule delete causing this problem
I'd say the remap just killed the ability to regen the DPF. Better update the software, to see if it recovers.
At least you tried, sond like the ad blue?
What's so hard about putting AdBlue in the car?
It's expensive to maintain. Nox sensors fail yearly at £300-500 each. Nox efficiency codes can set you back up to £5,000 I've seen. Adblue pump another £800-1500
@@ORileysAutos I thought it was just the cost of the AdBlue. That cost is just mad, no wonder people are giving AdBlue the flick. There must be someone out there that can design something to sort it out. My only experience is with prime movers , mining equipment and the like, don't have much trouble with AdBlue, only when someone runs the tank dry.
The adblue is cheap it's the adblue system that clogged up easily
You cant kill just a part of emission system. Egr,dpf,addblue off - only. No solilutions for killing seperate.
Yes you can. Done loads.
Its not reaching temperiture… (was this an auto).. Thoughts!!, is it the case he is driving it in low REVs (below 3000h) or needs at least 1/2 Tank of Diesel (or auto box is set too low). Isnt it the case that you need to drive a diesel like the police are chasing you … occassionally.. otherwise, i would just factory reset with software
I had this exact issue. I had adblue delete and it was failing to regenerate after doing more local journeys. In the end the dpf would just gain soot after a regen.
I deleted the dpf in the end. I found the adblue filter gets clogged to crap when I saw the internal adblue filter (right next to the dpf filter) in the bigger canister.
I’d suspect it’s due to the adblue being deleted but I was fine when doing motorway journeys. When local issues occurred.
I’d recommend deleting dpf leaving in cat and doing a remap. Other than that they’re better off just sending it main dealer. The emissions system is shit on these.
One last thing I’d recommend, sometimes once these ecu’s are mapped, they may not carry out resets correctly. When you registered a new dpf, did your ash level/ soot level reset?
It may have to have the original map file put on, resets to be carried out and then re -remapping. I found that is a cause for issues too.
get the customer to go and get the original map restored then fix the adblue system
Did you end up cleaning the DPF anyway or left it as was?
Hi mate,
You might be able to help me out...
I have a BMW and I can't get it to regenerate as the dpf doesn't reach the temperature ..it starts the regeneration but stays at 300....but if I force regeneration it will reach 600.
After forced regeneration the soot level increases quickly basically wants to regenerate every 30miles.
Your answer would be much appreciated
check the turbo, egr, injectors. whats the diff pressure on idle and around 2.5k rpm?
Sounds like it needs the adblu to reach temp? I suppose if someone was really clever they could adjust the parameters in the ecu to trick it into thinking the dpf is hot enough.. who knows..not me..😅
The only thing I can add is- is there enough excess fuel during regen ?.
Try the thermostat,Bmw won’t regen if it’s faulty
2:41 The coolant was hot enough on the car.
@@danielseibert4082 must be 97 degrees to re-gen,worth a check.
Jimmy i am buying a vw crafter 19 plate 120 thou miles are these vans any good 👍🏼
Bad news. They're absolute junk. Engines are like chocolate, buy a sprinter
@@danlovelock778 😕😂
note to myself - when you do AddBlue delete, do DPF delete as well :) all that pseudo ECO crap
Walk away if anything been deleted 😂
Waste of money mapping out only adblue, get rid of the dpf and egr, your engine will thank you. Keep the cat and will still pass MOT easily especially if on an eco map 👍
Is it the temperature sensor ?