Have your gunsmith check the bolt gap on your MAC 5. I am a FFL and gunsmith and just purchased one of these to evaluate and found that the one I have has no bolt gap at all. HK specs are .25mm to .45mm which is .010 to .018 inches, With no bolt gap at all means that the rollers are not engaging in the recesses of the trunnion and therefore what you will have is almost a direct blow back firearm. This will cause undo wear on the firearm and shorten it's life. This is not good. I urge all of you that have purchased one of these MAC 5s to check the bolt gap on your firearm.
Bought the firearm and put over 600 rounds through her on its first range trip. (200 suppressed) Not one hiccup. I was advised to strip, clean, and grease(not oil). So i did. Also, only 2 mags was pretty rough on my thumbs, for 600, hahaha. 👍 My philosophy of use for this gun was pretty simple. See if i like the platform, see if i want to pursue it and the like. Not everyone has 3k+ to shell out on a maybe. So, to me, a 1300 investment (sb brace, rail, cheap optic) was honestly in my budget, and obtainable as well as cost effective. Truthfully, I am a gun snob, but i i wasn't sure if i'd like the mp5 platform. So i went with this option, after being shown one in my lgs, compared to a real sp5. It was a no brainer, and also made it no so hard-pressed to drop money on ammo to test. For me? Well, I like it. I really do. And for what i paid for it, it was worth the experience imo. Will i own a hk mp5/sp5? Probably. Will you? Your mileage may vary. Hope this helps some interested parties. Definately worth the price of admission for this guy.
I love it. MAC gets them through SDS imports, but I believe Mertsav, who is a subcontractor of MKE, is the manufacturer. So essentially the old zeniths, or current century arms package (hence why they share the same handguard, muzzle device, sling) but at a more affordable price. If you've been on the fence, this is probably as good as its gonna get. It beats out the ap5 core package sold by Atlantic Firearms while offering all the non-core items (aside from the brace) AND you get more mags. The mags alone make the deal for me and that's coming from someone with an AP5 and an SP5k. Had I known these were coming id have gotten it over the ap5
@@BUCKEYESHOOTINGCENTER I have one of the AC versions of the triangular hand guard that has vent holes on the side and is lightly ribbed (For your pleasure). The ribbing really improves you hold on the gun. At least now that I have the MAC I’m already for Christmas and Hans Grubber! 😉
For the full size, I got a PTR-9c first, then an MKE AP5 for outdoor range training. Now, you show up telling me I could have a grand in the bank if I only waited. Plus, I had to buy that B&T style flash hider myself. A lot of people said the PTR-9's were even too high which was when the AP5 core was released by Century Arms. The MP5 fence dwellers shouldn't be hangin' out anymore with the MAC. I'd still put an HK-C1 binary in that thing. It makes it an MP5 with ammo discipline. Semper Fi.🇺🇲
MAC 5 is spot on, and absolutely a very nice piece. My bolt gap is perfect at 0.45 too. So the quality is HK Tooling and its perfect. Great quality control.
Fired an MP 5 years ago in .40 SW. It was my first time firing a full auto and it was easy to dump a mag and and put every round on paper at 10 yards. Now 30 feet may not seem like much but as a full auto virgin at the time I was astounded how nice the recoil impulse was.
I just ordered one of these yesterday and didn't see your review. After watching yours I'm a subscriber thank you for an honest In-Depth review. I am pumped to get this thing!!!
@BUCKEYESHOOTINGCENTER Did you guys check the bore/muzzle threading concentricity? Would like to know about that, as well as how tight the 3-lug locks up.
Mertsav is the actual manufacturer. They are sub contractors for MKE and these are made from mostly MKE components. It stands to reason that these would be nearly identical to MKE sub guns.
Mertsav uses their own parts. MKE at one point did buy and still could be buying parts from Mertsav. I am not aware of any proof of their corporate relationship reversing like that.
This is my first episode with you guys. I liked your show in about 5 minutes. You guys make this understandable. You don’t talk down to us Thank you. This is my first show and will not be my last
I built mine from a flat, using a de-milled MP5 for parts. I love it. And Im fortunate to have a good friend with a transferable auto sear. It’s by far, my favorite gun.
Lee's sporting makes a "lower" for mp5 clones that lets you use AR grips and triggers as well as an AR safety. I think there's some fitment you have to do and I'm pretty sure you have to modify most triggers but not all. They have the information on their website
I pulled the trigger on this gun without watching your video. I found your video afterwards and only reassured me that I made the right decision. I can’t believe how close to a real MP5 this thing seems. Other than the branding and the threaded barrel, I cannot tell a difference.Heading to the hardware store to get a file.😂
@@RenzinoBambinoours, and all the ones we’ve put hands on since this video are in spec, I’m not sure how many folks don’t have a bolt gap, but we haven’t seen that yet coming through our shop.
Lol I bought the MAC5k. I am turning it into an SBR. That said I'm going to buy the regular MAC5 as well. The 5k is equally badass as the full size MAC. You can't go wrong with either model
Fyi, The MP5 was first seen in use with the West German border guards in 1963! The 'Princess Gate' SAS hostage rescue made it a legend in 1980. I can't wait to get a Mac 5
This is an amazing weapon, I've always wanted an MP5 and never pulled the trigger, lol. What a suprise this would be. Keep it up. i love the videos so far.
Good Review. I've been looking and at the different clones on line trying to choose. Half of me wants the SP5 just because.... But for the price of this, if it is that true to form and spec of the original. Its looking like this is a MAC Daddy ~ conspicuously successful.
Has it ever jammed? I was going to purchase the Zenith ZF-5 but seen many videos that it has ejection, jamming and last bullet not firing issues and don't want to deal with it.
This has been my FFL for about five years now. I think I’ve purchased about 30 firearms from these guys. I was today years old when I realized they had a TH-cam channel.
Looks nice. I always wanted one but to costly to me. But this one looks damn good. I have the HK 91 and have wanted a MP 5 to add this to the family but this would do for me.
IMO, and I’m sure someone will get Butt hurt out there, but I don’t think CHF is as big of a deal with pistol calibers. Sure, it’s better, but I don’t see it drastically changing the durability or longevity of a pistol caliber firearm.
@@BUCKEYESHOOTINGCENTERI’ve done testing of various bbl steel types and bore treatments for the 300 Blackout. CHF in that caliber with jacketed bullets only adds about 500 rounds of life over non CHF. 41V50 steel adds more bbl life than 4140 and chrome plating really adds to the life. Nitriding does add life, but not as well as chrome plating. I wouldn’t worry about non CHF.
if your thinking about getting the MAC 5 now is the time! the price is right. but I fear the price will go up closer to November when people start panic buying.
I rather have the CHF barrel of the MKE and as for their magazines they work without any issues with the six I have. I also have HK magazines with the old LEO markings and no issues in the MKE. It is nice to have other companies building these pistols to help bring the cost down on these type of firearms. Does the MAC 5 have a chrome lined barrel?
@BUCKEYESHOOTINGCENTER Great video! Question: Where did you get the full sized buttstock for the MAC-5? I think it looks amazing, but I can't find where in anywhere online to purchase. Can you assist with where to find the buttstock (and/or what make/model buttstock to search on our own for?). Thanks again, guys!
Did u guys see the torture test just released by battle hawk armory? Mac-5 had some serious issues when they poured water over it to cool it off. I don't think they lubed it enough but still concerning. I just ordered one. Don't have it yet.
I mean, don’t dunk it in water to cool it off? Personally, I’ve never done that, and I’m not sure how many guns would like that… but hey, torture test away.
Ha! Right I agree but would you recommend running the gun wetter than normal or even using grease? Would be cool to see a test where it's lubed up more. I bought one but there video makes the Mac look pretty unreliable. Thx for the response appreciate it.
I own an MP5 clone. I think, for a real fan of this firearm, it is worth it to save up for the SP5 and just save yourself all the headaches these clones tend to come with.
What kind of barrel does it have compared to the mp5? I think it’s a button barrel. But I just received mine. HK website has a trigger that fires a round when it is pulled and released. Any experience with this? Thanks, Paul
That is the Frankllin Binary trigger that fires on pull and release. Freaking $600!!! Thats absurd! The MAC Barrel is chrome lined. Welds are good. It is also made on Licensed HK machinery but their QC on bolt gap sucks butt. MIne had ZERO bolt gap. I am in the process of RMA to SDS for repairs.
We've had a few come through, and do stock them. They are just now starting to trickle in, but they were supposedly going to be available at the beginning of Q2... They availability is getting better and better.
MP5 clone finally hit my price range for fun toy. Gotta have a brace or stock on this indeed. Just need to win the lottery and pick up a real MP5 but in the mean time MAC-5 will do.
My thoughts exactly. The sp5 is barely worth it anymore especially considering you could get a HK AR for 2-300 more for what they’re charging for it which would be more worth it.
This is a great point! The simple answer is, use a US-made MP5 magazine and you should be fine. Though I am not an attorney and this is not legal advise. I like how John Pierce breaks this down (short read). The ATF, not surprisingly, has flip-flopped many times over the years on 922(r)...especially with making an SBR from a pistol. johnpierceesq.com/does-922r-apply-when-building-an-sbr-from-an-imported-pistol/
@@BUCKEYESHOOTINGCENTER Thanks for the link. "Ten part maximum" of imported parts and this pistol is 100% made of imported parts. Something to ponder. All the channels I have seen about this pistol promote the same jargon: "you may register it as a SBR." As a lifelong NFA collector, I choose to avoid "grey areas." Your mileage, of course ,will vary.
Have your gunsmith check the bolt gap on your MAC 5. I am a FFL and gunsmith and just purchased one of these to evaluate and found that the one I have has no bolt gap at all. HK specs are .25mm to .45mm which is .010 to .018 inches, With no bolt gap at all means that the rollers are not engaging in the recesses of the trunnion and therefore what you will have is almost a direct blow back firearm. This will cause undo wear on the firearm and shorten it's life. This is not good. I urge all of you that have purchased one of these MAC 5s to check the bolt gap on your firearm.
That’s why HK commands the price they want. Just save up for a legit SP5 instead of the knock off ones.
Thank You for the information.
@@ImlikeHIGHHHmy AP5 and AP5P have both been in spec. Actually, my AP5 is build closer to the MP5 than the SP5. Just review the specs.
I can confirm this and my MAC 5 has no bolt gap
I laughed when someone says their product is great until an expert comes along and pops their balloon!! Thank you!
80s kids dream. Yessir!
Bought the firearm and put over 600 rounds through her on its first range trip. (200 suppressed) Not one hiccup. I was advised to strip, clean, and grease(not oil). So i did. Also, only 2 mags was pretty rough on my thumbs, for 600, hahaha. 👍
My philosophy of use for this gun was pretty simple. See if i like the platform, see if i want to pursue it and the like.
Not everyone has 3k+ to shell out on a maybe. So, to me, a 1300 investment (sb brace, rail, cheap optic) was honestly in my budget, and obtainable as well as cost effective. Truthfully, I am a gun snob, but i i wasn't sure if i'd like the mp5 platform. So i went with this option, after being shown one in my lgs, compared to a real sp5. It was a no brainer, and also made it no so hard-pressed to drop money on ammo to test. For me? Well, I like it. I really do. And for what i paid for it, it was worth the experience imo. Will i own a hk mp5/sp5? Probably. Will you? Your mileage may vary.
Hope this helps some interested parties.
Definately worth the price of admission for this guy.
I love it. MAC gets them through SDS imports, but I believe Mertsav, who is a subcontractor of MKE, is the manufacturer. So essentially the old zeniths, or current century arms package (hence why they share the same handguard, muzzle device, sling) but at a more affordable price. If you've been on the fence, this is probably as good as its gonna get. It beats out the ap5 core package sold by Atlantic Firearms while offering all the non-core items (aside from the brace) AND you get more mags. The mags alone make the deal for me and that's coming from someone with an AP5 and an SP5k. Had I known these were coming id have gotten it over the ap5
I own an ap5 myself and been on the fence about the mac. Another mp5 wouldn't hurt?
@@nikothevirgolet us know 😊
I've been reading that the MAC has a button barrel instead of a CHF barrel like the AP5 has. So they aren't exactly the same.
@@clay4542Agree. I read that also.
SDS Imports just uses the MAC Brand. MAC went under in the 70s so it is just a name now. Cool logo though.
The grippy diamond plate hand guard was the original hand guard issued with the first MP5s.
This isn't bad at all, but I like the triangle fatter one personally.
Correct, I love it just like I love diamond plate truck beds. Awesome stuff
@@BUCKEYESHOOTINGCENTER I have one of the AC versions of the triangular hand guard that has vent holes on the side and is lightly ribbed (For your pleasure). The ribbing really improves you hold on the gun. At least now that I have the MAC I’m already for Christmas and Hans Grubber! 😉
It's not hard to find the triangular handguards if you are wanting to change it out.
For the full size, I got a PTR-9c first, then an MKE AP5 for outdoor range training. Now, you show up telling me I could have a grand in the bank if I only waited. Plus, I had to buy that B&T style flash hider myself. A lot of people said the PTR-9's were even too high which was when the AP5 core was released by Century Arms. The MP5 fence dwellers shouldn't be hangin' out anymore with the MAC. I'd still put an HK-C1 binary in that thing. It makes it an MP5 with ammo discipline. Semper Fi.🇺🇲
MAC 5 is spot on, and absolutely a very nice piece. My bolt gap is perfect at 0.45 too. So the quality is HK Tooling and its perfect.
Great quality control.
Fired an MP 5 years ago in .40 SW. It was my first time firing a full auto and it was easy to dump a mag and and put every round on paper at 10 yards. Now 30 feet may not seem like much but as a full auto virgin at the time I was astounded how nice the recoil impulse was.
I just ordered one of these yesterday and didn't see your review. After watching yours I'm a subscriber thank you for an honest In-Depth review. I am pumped to get this thing!!!
I have always wanted an MP5 but didn't want to spend spend a ton. I am excited we finally get a more affordable alternative!
Nice review thanks! The MP5 might just be the MOST iconic gun out there. Glad someone is making a faithful reproduction for an awesome price!
@BUCKEYESHOOTINGCENTER Did you guys check the bore/muzzle threading concentricity? Would like to know about that, as well as how tight the 3-lug locks up.
i'd like to see the k version as well. for the $ you can get both for less than the h&k. bucket list for sure.
Mertsav is the actual manufacturer. They are sub contractors for MKE and these are made from mostly MKE components. It stands to reason that these would be nearly identical to MKE sub guns.
The majority of the parts are manufactured by Mertsav in their own facilities.
Mertsav uses their own parts. MKE at one point did buy and still could be buying parts from Mertsav. I am not aware of any proof of their corporate relationship reversing like that.
This is my first episode with you guys. I liked your show in about 5 minutes. You guys make this understandable. You don’t talk down to us Thank you. This is my first show and will not be my last
I just got the Mac 5 and im very impressed with it. Very well made. I would recommend getting one while you can at this price point.
We were kind of blown away when we saw the sticker. It’s insane these are less than a grand.
Braces are available on their website and the gun is compatible with MOST MP5 accessories.
Did this get function tested with hollow points?
That I'd like to see, feeding issues...
I built mine from a flat, using a de-milled MP5 for parts. I love it. And Im fortunate to have a good friend with a transferable auto sear. It’s by far, my favorite gun.
Lee's sporting makes a "lower" for mp5 clones that lets you use AR grips and triggers as well as an AR safety. I think there's some fitment you have to do and I'm pretty sure you have to modify most triggers but not all. They have the information on their website
Then it's not an MP5 anymore.
Why would you want AR junk on a MP5 or any other H&K stuff any way, and you can tell I am not an AR guy.
My dream gun
I pulled the trigger on this gun without watching your video. I found your video afterwards and only reassured me that I made the right decision. I can’t believe how close to a real MP5 this thing seems. Other than the branding and the threaded barrel, I cannot tell a difference.Heading to the hardware store to get a file.😂
Wondering if the use of a file would make it then a unlawful possession 🤷♂️
Check your bolt gap before firing
@@RenzinoBambinoours, and all the ones we’ve put hands on since this video are in spec, I’m not sure how many folks don’t have a bolt gap, but we haven’t seen that yet coming through our shop.
The solid stock is so much more badass than the collapsible stock.
Lol I bought the MAC5k. I am turning it into an SBR. That said I'm going to buy the regular MAC5 as well. The 5k is equally badass as the full size MAC. You can't go wrong with either model
Got my Mac5 a few weeks ago. Absolutely love it. Its well made and shoots great. I can buy 3 for the price of a sp5.
Fyi, The MP5 was first seen in use with the West German border guards in 1963!
The 'Princess Gate' SAS hostage rescue made it a legend in 1980.
I can't wait to get a Mac 5
At about 1/3 the price of HK I’d give it a shot.
This is an amazing weapon, I've always wanted an MP5 and never pulled the trigger, lol. What a suprise this would be. Keep it up. i love the videos so far.
Good Review. I've been looking and at the different clones on line trying to choose. Half of me wants the SP5 just because.... But for the price of this, if it is that true to form and spec of the original. Its looking like this is a MAC Daddy ~ conspicuously successful.
Can you swap the Handguard ?
Definitely adding to the "Want List". Thanks for the nice review guys!
Any time!
How does this stack up to the POF5 from Pakistan Ordinance Factories.
Has it ever jammed? I was going to purchase the Zenith ZF-5 but seen many videos that it has ejection, jamming and last bullet not firing issues and don't want to deal with it.
MP5s are a gift from God
Ordered mine yesterday. Always wanted an mp5 and this is as close as I'll ever get.
This has been my FFL for about five years now. I think I’ve purchased about 30 firearms from these guys. I was today years old when I realized they had a TH-cam channel.
I've always wanted an MP5
that handguard is like the original H&K
Looks nice. I always wanted one but to costly to me. But this one looks damn good. I have the HK 91 and have wanted a MP 5 to add this to the family but this would do for me.
So the barrel is not CHF? Is that a deal breaker? I was about to buy a Zenith ZF5.
Chrome lined button rifled. I asked sds directly.
Button rifling vs chf barrel? Extra $ worth the chf?
IMO, and I’m sure someone will get Butt hurt out there, but I don’t think CHF is as big of a deal with pistol calibers. Sure, it’s better, but I don’t see it drastically changing the durability or longevity of a pistol caliber firearm.
Unless you’re running full auto I don’t think it’ll matter much. At least it’s chrome lined
@@BUCKEYESHOOTINGCENTERI’ve done testing of various bbl steel types and bore treatments for the 300 Blackout. CHF in that caliber with jacketed bullets only adds about 500 rounds of life over non CHF. 41V50 steel adds more bbl life than 4140 and chrome plating really adds to the life. Nitriding does add life, but not as well as chrome plating. I wouldn’t worry about non CHF.
Theses look really great. Will look online for one.
if your thinking about getting the MAC 5 now is the time! the price is right. but I fear the price will go up closer to November when people start panic buying.
My fear as well
Yeah this comment didn’t age well. They actually got cheaper 😂
@@KennethSchmittwhat an irrational fear lol. Went lower than it was prior
Thanks for the info!!
such a cool gun
I've seen SP89s with blobby welds and paint holidays from the late 80s and early 90s probably due to the watercooler being filled with bier.
What about the quality of the steel and quality control? Just asking
I rather have the CHF barrel of the MKE and as for their magazines they work without any issues with the six I have. I also have HK magazines with the old LEO markings and no issues in the MKE. It is nice to have other companies building these pistols to help bring the cost down on these type of firearms. Does the MAC 5 have a chrome lined barrel?
Someone else said it does have a chrome lined barrel.
yes the barrel is chrome lined just not CHF
There is nothing wrong with a chrome lined button cut barrel
@BUCKEYESHOOTINGCENTER Great video! Question: Where did you get the full sized buttstock for the MAC-5? I think it looks amazing, but I can't find where in anywhere online to purchase. Can you assist with where to find the buttstock (and/or what make/model buttstock to search on our own for?). Thanks again, guys!
Great video as far as the slim handguard on the Mac 5 its the same as the original MP5 handguard the triangle handguard was not introduced until 1978
Great video guys, keep up the great videos !!!
Love that fixed stock 🤌🤌
What is that sound after the shots?
How's this compared to something like an AP5?
Ap5 is made on HK machines. I suspect this is just a renamed AP5 from the same factory
Less cold hammer forged barrel.
I’m about to buy one of these. Glad I found your channel and review! Keep it up fellas! Stay strapped!!
Did u guys see the torture test just released by battle hawk armory? Mac-5 had some serious issues when they poured water over it to cool it off. I don't think they lubed it enough but still concerning. I just ordered one. Don't have it yet.
I mean, don’t dunk it in water to cool it off? Personally, I’ve never done that, and I’m not sure how many guns would like that… but hey, torture test away.
Ha! Right I agree but would you recommend running the gun wetter than normal or even using grease? Would be cool to see a test where it's lubed up more. I bought one but there video makes the Mac look pretty unreliable. Thx for the response appreciate it.
Thank you gentlemen for the video.
What's up guys nice content... I have the AP5 dressed it like the original MP5, Lol... 😎
How far away was a the target. Groups look wide
Chrome barrel, bolthead gap ,extractor spring?
What distance is this? I can’t imagine an indoor range far enough to spray that much.
$975 sale last week thru Atlantic. 👍🏻😁
Ohhhh. Thanks
I own an MP5 clone. I think, for a real fan of this firearm, it is worth it to save up for the SP5 and just save yourself all the headaches these clones tend to come with.
Do you think real deal smooth handguards would fit on the mac5?
They do.
I’ve been wanting something like this for a backpack gun
Can always use another. Expensive are better but cheap is good too.
I am jealous! I wish I could afford one.
What kind of barrel does it have compared to the mp5? I think it’s a button barrel. But I just received mine.
HK website has a trigger that fires a round when it is pulled and released. Any experience with this?
Thanks,
Paul
That is the Frankllin Binary trigger that fires on pull and release. Freaking $600!!! Thats absurd! The MAC Barrel is chrome lined. Welds are good. It is also made on Licensed HK machinery but their QC on bolt gap sucks butt. MIne had ZERO bolt gap. I am in the process of RMA to SDS for repairs.
A great review!
I just subbed👍🏽
Does it accept the Franklin armory Binary trigger? The only thing i need to know before i go and get me one.
yes
This is awesome always wanted an MP 5 an I just recently found out about this clone from MAC
I love that gun!!!!
Awesomeness at 39 I need this piece of hardware
Is it actually out yet?
😂 right! I'm seeing all this crazy budget copies but nothing is out or in stock. It's like a myth!
Yes
@@stonefox9124 they were supposed to be out in April. It’s September and I still haven’t seen one.
We've had a few come through, and do stock them. They are just now starting to trickle in, but they were supposedly going to be available at the beginning of Q2... They availability is getting better and better.
Yep. Bought one at a gun store in Knoxville a few hours ago
The original handguard for the MP5 is the checkered handguard.
MAC is doing some good things
Unless I'm mistaken - but are those rounds keyholing?
Nah, the paper target doesnt have a backer so the holes just tear out kind of easy
I need this in my life!!!❤
Nice this is great! MAC 5 is cool retro clone of the HK MP5!!
Does it come in Red Tiger?
That slim handguard is the pre1978 one. The wide one is a big improvement and cheap.
Yep have to get this perfect with my yhm r9 can too
Love the content you earned a subscriber. I had one question, thought on the barrel not being chrome lined?
The barrel is chrome lined.
It is chrome lined. It's pretty much an OEM barrel you'd find for any of the MP5 clones.
Prefer the skinny handguard. True old school MP5.
Great video, guys! Question…does a Franklin binary trigger just drop in? Is it a ‘better feel’ binary…crisp, lighter, etc?
yes
Love to own something like this.
I’ll be getting one real soon!!
I'm gonna get one of these.
How about a knock-off 5.56 MP5 or HK53?
👍🏻 good video liked and subscribed
I can't compare it to others but mine has been quite nice for a poor man's MP5.
MP5 clone finally hit my price range for fun toy. Gotta have a brace or stock on this indeed. Just need to win the lottery and pick up a real MP5 but in the mean time MAC-5 will do.
My thoughts exactly. The sp5 is barely worth it anymore especially considering you could get a HK AR for 2-300 more for what they’re charging for it which would be more worth it.
I’m with you, need to win the lottery to get a real mp5. I think the cheapest I saw was about $72,000!
I'm thinking, for the non-FFL/SOT, trying to SBR this would be a violation of "922r", which is a felony.
This is a great point! The simple answer is, use a US-made MP5 magazine and you should be fine. Though I am not an attorney and this is not legal advise.
I like how John Pierce breaks this down (short read). The ATF, not surprisingly, has flip-flopped many times over the years on 922(r)...especially with making an SBR from a pistol. johnpierceesq.com/does-922r-apply-when-building-an-sbr-from-an-imported-pistol/
@@BUCKEYESHOOTINGCENTER Thanks for the link. "Ten part maximum" of imported parts and this pistol is 100% made of imported parts. Something to ponder. All the channels I have seen about this pistol promote the same jargon: "you may register it as a SBR." As a lifelong NFA collector, I choose to avoid "grey areas." Your mileage, of course ,will vary.
this boy just turned into mark morrison lol return of the mack fr
Great review
Love mine
Hell yeah!
I picked up one of the AP5-P’s from Atlantic for less than $900 and glad I did. I may have to go for a full size MAC version.
I did the same. The AP5P’s are really good. They’re actually made on the same machinery as the real MP5s were made on for HK.
Let us know, and we can get you squared away!
I bought one made by MKE .
Dang it, y'all just made me buy a MAC 1014 two days ago and now you're convincing me to buy another MAC? I won't resist lol