Playing with Chris Hardeman's Graviflyer at the Falcon Space Shop
ฝัง
- เผยแพร่เมื่อ 14 พ.ย. 2022
- A graviflyer replication of Alexey Chekurkov made by the late Chris Hardeman reported to do an 80 gram weight loss. This set up was done by Charles Crawford, but after he left I had a go at it. It has unfortunately been sitting on a shelf for too long...
Let's see what happens.... - วิทยาศาสตร์และเทคโนโลยี
This is Alexei Cherkukov Project.
Not Run! : )
he mentioned that in description
th-cam.com/video/wH4y0SQwCgs/w-d-xo.htmlsi=fCpsHnPIK4npj3Ch
I'm 3 minutes in, which module is being used to amplify the sig-gen output ?
I didn't end up using the sig gen. The high frequency energy was making it heywire
@@failforwardresearch3127 Thanks.
Changing the freq of the coil affects the top rotor speed due to some kind of coupling between the eddy current in the midplate and the secondary eddy current in the top rotor. As this very narrow window is tuned finer and finer, the slowing becomes more and more pronounced. This slowing isn't steady, but pulsed so the pulsing is really what's becoming more pronounced, and this pulsation causes a back EMF into the tesla coil. What makes the system even more chaotically difficult is that the beat freq from the difference of the top/bottom rotors rpms is disrupted by this pulsing rpm in the top rotor. It's happening in the lower rotor too, but it is much less pronounced due to the added mass & magnetic drag of the lower rotor. I think the secret lies somewhere in controlling these beat freq oscillations. This is why having tachs installed for the rotors is the most important next step for the graviflyer team. The rpms must be tuned in concert with the tesla coil, and they are both VERY touchy w/ the TC adjustment resolution needing to be less than 1khz, and the rpms tuning resolution within 3-5 rpms.
Once these are tuned fine enough, the last thing Alexsey does is turn on the ultrasound, which has the effect of damping the RF much more above the midplate than below. There is about a 3-10 second delay between ultrasound power and measured RF output.
It's a beast of complexity. I decided not to invest my time in the GF a while back. It would be great if chekurkov would do an instructional video on what and how he tunes these things. He could even sell it! The hardware part is relatively easy.
According to Otis Carr, the Earth gets one rotation every 24 hours, this would be for example a disc of 15 cm diameter reaching the speed of 60000 RPM. When this relative speed is reached, it became freed from the attractive inertial mass of the planet, and activated by the energy of space (a cold energy without dissipation). The aluminum disc would need to be electrified, to be its own protective shield againt heat, air friction, and vibration.
How would it do this when Rotation has nothing to do with Gravity?
It’s frequency, resonance. 1 turn per “hz”
He'll be back when he finds a new flex compacitor.
Obviously needs more Red Bull. 😂 Men in Black will be there by 3:00.
funny thing is MIB actually did show up to the lab. Ilive nearby and it was on the news. See for yourself ;)
What scientific data you got on this experiment ?????.Physics and mathematic data etc.
That’s what I’m saying
If I had more knowledge of electronics I would have a go of making one. What I believe it lacks is the special treated plates. Do you know if Chris's Graviflyer had that type that Alexey Chekurkov had used? Did Chris try to duplicate the spinning plates. Great video you proved the concept somewhat so Alexey was not hoaxing his invention. Did Chris attempt anything with beetles by chance.
Strong eddy currents produced by magnetic fields have levitation capabilities. This is amplified with superconductors because the extreme decrease in electrical resistance, creates powerful magnetic fields that in turn generate a powerful eddy current or mirrored electromagnetic field
You still didn't answer my question did you duplicate the metal spinning plates he had special doped plates that he didn't divulge if you go back to older videos of his I think it was the one where he shared the schematics on how to build one he talked about the special plates that allowed it to lift off the ground and go real high in the sky with out them it would bearly lift of the ground also there was no super conductivity involved just neodymium magnets, a tesla coil, and a frequency generator that was induced on the plates do more research if you find what those plates were doped with you might get closer to achieving the heights he got good luck and keep trying look for those videos and find a way to translate the Russian dialog and share with us what you found out thanks for late reply hopefully I won't have to wait to long for a better answer
@@mrgfunkarama look.into dialectric magneto gravitics and MHD propulsion
That high voltage is demagnetizing your magnets rapidly
Which metal are the weights made of ?
@@bobjohn8581 Thanks, does have that lead, tarnished colour.
@@bobjohn8581 Thanks Bob. I was wondering if the movement was due to the properties of lead, ie: practically zero resistance, but it's very low conductivity too. I've always been suspicious of the graviflyer but some of his videos, especially the outdoor ones, are impressive in that he waves long poles around the object so that it's clearly not strings.
What do you think ?
@@bobjohn8581 Thanks for all comments Bob.
Lead fishing weights
@@failforwardresearch3127 Thanks.
Can you drive the Tesla coil and the ultrasonic from the same signal source so that they are phased locked? Also Drive the positive and negative plates with an isolated Supply so that those voltages can float around independent of actual ground?
I don't know how to do that. Its a slayer circuit, and Mark only has one DC lab power supply. Maybe Charlie has?? I'm going to play around some more with it, maybe I will make some other improvement
@@failforwardresearch3127 how you would do that is run a signal generator, driving frequency of all of the rest of the components. Potentially through a frequency divider or some such thing so you can have different frequencies on different items, but they still need to be phase locked. You need to rework the circuits a little, but the driving transistors should be able to stay the same it's just you need a different input from the signal generator. I know all of the electrical engineering behind doing any of this, so ask if you want details. Or call me on the phone I'm pretty sure you have Jeremiah's phone number, and he has mine.
You will get MUCH better effects with the tesla coil if you use many turns of thick insulated copper wire. I know what the general consensus is etc for these things but that is for large coils. Making these tiny copper tubing primaries produces crappy results. Using a 10kv 35ma OBIT transformer I could have a coil that size sending out 5-10 inch streamers with ease. Make it Bipolar, wrap about 10 turns or so of the insulated copper wire like that used in houses and you will see a dramatic improvement.
It looks identical to the design of Alexey Chekurkov. Give credit when credit is due, that's what people have to learn.
he did bro
I think some of the issue is the lip on the center plate, center plate being slightly too thin, and you aren't using the dimpled aluminium type for the rotating disks (as far as I can tell), and the conical shape of the ultrasound module on Alexey's was also part of the required design
It was a finicky set up, and that contraption ( I didn't make it, the guy is dead) was not in good balanced shape. Also, it seems like nobody has a clue what they're looking for with this thing. It ain't gonna lift off the ground first time. The scientific method is badly needed here.
This is the second of this kind of video I’ve seen today. The other one featured some German dude using a Haibach array taped to the bottom of a small copper dome and claiming to feel some kind of thrust force acting perpendicular to the plane defined by the bottom of the dome when he moved it in certain orientations.
Are you guys perhaps trying to generate lift by interacting with the electron field in a manner similar to how airfoils interact with the atmosphere? Sounds fascinating in concept; according to QFT, all quantum fields permeate the entire universe and fundamental particles are just excitations in said fields. It should be able to generate thrust; even in vacuum, but the question then becomes how does one create the most efficient possible “electron field foil?” There are many variables to explore toward that end, if that’s your goal.
I'm not sure what you mean by electron field, but we are looking for ways to lift and thrust without conventional limitations.
End of last year, I heard about IVO Limited's Quantum Intertia drive that was attempting to use magnetic fields to manipulate gravity. They ran as many tests as they could on earth and eventually decided to launch two of the drives November 2023 on a SpaceX Falcon 9 flight.
It's now mid Feb 2024. From what I recall, their plan was to test it in the vacuum of space to see if it could produce the same type of propulsion they managed to demonstrate here on earth.
Afaik, it's somewhere in orbit now, but the company has been real quiet.. unsure if it worked, if it didn't and was just a scam, or if it worked so well they were silenced by an external party.. regardless, I'm curious if it was anything like this concept or something entirely different.
Its not a scam but the thrust is really small and that works, in theory, by using Microresonator cavities to create an artificial horizon for Unruh like radiation. I remember reading its going to take some time before they can say if it works, something like 6 months or 2 years something like that I cant remember exactly how long but basically, we are in a waiting game with that one at the moment.@@r4microds
Encouraging results
@@bobjohn8581 Wouldn't say anyone really has it working at the moment, to be honest. Once we know the correct parameters, it'll be easier to figure out how it works. Unfortunately, It'd be easier to figure out the correct parameters if we knew how it worked
@@simoncleret is the iron plate tin? I read that the zinc in most of our iron throws off the electromagnetic charge
The mal-function generator 6:10 the shaft was oscillating.
I would give it a try with 333kHz. According to Bashar Channeled by Darryl Anka, that frequency is the threshold with non-physical reality and used in many different extra terrestrials technologies.
I would've thought the frequency would be 432 HZ. As they say that frequency is in perfect tune with the Earth. Musicians tune their instruments to 440HZ. But back in the resonance period Sébastien Back determined that 432HZ was the Earth's resonate frequency. And tuned his piano or harpsichord to it.
Also you might be able to open a portal 🤔
Seems legit, I mean all the numbers are the same and people have a weird fascination with 3 for some reason so of course it's the Alien frequency number why not. Just let me take another hit of this crackpipe and we will get right on building one.
the top rotor also needs magnets.. you want the middle plate to become a magnetic neutral plate
How would that help??
@@crusaderknight6928 this is kind of difficult to explain without a drawing .. but the neutral of a magnet has 4 poles .. 2 from the north 2 from the south, these 2 are 180degree out of phase .. but travel at 45 degree, on the neutral they are 90 degree out of phase.. this is where all directions get cancelled out (45/225) (315/135).. and generated a equilibrium.. this is a dielectric plane.. all force is cancelled out here and generates inertia. A bit like when you press the break in the car, the law of motion dictates, that when a mass is moving and you try to stop it, it will resist this .. this resistance is the inertia of the object, a magnetic field has the same thing, when you cancel out a magnetic field .. a dielectric field is generated .. like a standing "wave" in a Tesla coil ..
@@0x2a1A4 Have you created one of these before?? I have a short attention span when it comes to comment paragraphs lol.
@@crusaderknight6928 take it or leave it.. theory is important
@@0x2a1A4 Not all of them.
I only know that a gyroscopes can stay up right from gravity and i seen people balance rocks so I think you can balance a gyroscopes on air with a little help of ion wind
Na, they are not balanced, they are just resisting change in direction due to the inertia of the heavy spinning weight. All the Gyro could do is help resist changes that the minute forces of Ionic wind might impose.
you need to add Mercury to your project then it will fly . scientist at area51 have already a craft shaped like a triangle that uses Mercury and plazma to create lift .
Yep. Won’t be long now.
It is impossible to make this simple motor without knowing the principle, what does it start from? what is electric current? what is magnetic flux? how are they connected?
What do the 2 cans of fizzy drinks do?
They are Red Bull. Red Bull gives you wings.
It had about 1/4" of movement during the last shitdown. A scale would be nice. Hang the weights from a ruler or something!
OTC says the rotating speed has to match the earths, if it even rotates 😮
If what even rotates ? The Earth?
@@seditt5146 yup, earth might be might be more complex than than that.
Maybe you should ask Ken Wheeler. He knows a lot of woo.
it may only hover when useing the earths tapped power closer to the earths equator thats the hidden unknown for it
It worked in Russia though, so idk
So what are the things detected around UFO encounters, magnetic fields, microwaves and probably strange mixtures of materials. Thats were I would start. Magnetrons already have magnetic fields so thats a two for one.
Generally Glowing CIA agents.
I don't understand how it works. Why is it important to understand the sandwich structure?
I bet another can consumption of good old RED BULL would do the trick!!😅
TF did I just watch?
No veo levitar el dispositivo. Además no estan bien ajustados los platos giratorios e imanes,etc....
I'm the one that invented several methods Chris started using. Hanging the flyer on a scale with bracing was my idea completely. It was cheap and gave a spacial aspect that he didn't have even a little bit of with it sitting on the counter. It gives a hint at the fact it needs harmonically tuned. That's a couple things, we had had huge conversations. I inspired him very much. What I seen during some experiments was nothing less than paranormal. Very dangerous levels of frequency cooked his heart.
If you have some "know how" on the Graviflyer there is a whatsapp group dedicated to it. Charlie Crawford is in it, also set up the one in this video for tests. Charlie has a kit and direct communication from Alexey Chekurkov and still not able to fly one. So if you know better, I am skeptical, but there is a ravenous community here around this, not so much myself. I would recommend you check out his channel "charlie C" and hit him up. Also, if you would like to share your ideas and claims Mark Sokol at falcon space, or the alienscientist would probably love to interview you.
I want that folks treat our gravinductor as you suggest. Digital is unreliable at superluminal propagations.
Hi I have inertial propulsion prototype. I am not a good engineer but I need some one to build it and test it. if it works I can share the patent with you.
Did you patent something that you haven't tested to see if it works?
@@failforwardresearch3127 Sorry it is a provisional patent application. So far I reduced to complexity of it but it is required some works with prototype and flawless motion. However initial prototype may have issues. Anyway I made calculations with chatgpt. It is worth it to try. It might be hard to build it for me. Thats why i am needed a partner to work together.
I can't even tell what going on.
Так кто же Алексей Чекурков,
ГЕНИЙ или мистификатор???
hoaxer.
Hoax
is it me or this video full with hidden messages?
I think its just you buddy
Bro please tell me you're not stealing boxes from the Post Office
Вот мы и видим что это полная херня, и телефон не отключается, а у нашего лохоторонщика то качество говно, то телефон выключается
Uh, whats the theory of operation?
Spinny thing go Brrrrr,
Ultrasonic thing go Bzzzzzz,
Electricy thing go ZZzzzsss
and Gravity go "WTF Are you doing man!, that's not how this works, that's not how any of this works!"
its a hoax, but why - such unecessary BS.@@seditt5146
whats with that floating banana?
If you want to make a UFO then the gyroscope must left up its own house mass plus it own as will balancing in air
You cant use galvanized steel as the center plate. He is resonating aluminum in the center plate. It pulses the magnets as they rotate. That allows for lift by making a modified sound wave. The ultrasound acts as a conductivity amplifier to the resonance of the center plate. You would have to imagine a coil under the center plate to understand the correct effect. It takes two waves and a pulse to make a resonance frequency just like tesla's earthquake machine. the waves have a high and a low to each one. Think of horse hoofs. That's why you see the sign no horses can cross this bridge( it would collapse). The river gives off a pulse and the hoofs the two waves with high and low (4). Rotation is only balance not lift. not ever lift. rotating sound waves look like a barber pole. not like the levitation experiment that traps an object between two waves. good luck. I hope you do well.
Thanks for the comments, but I didn't build this and I don't own it. It sounds like you have a some clear ideas, maybe a working machine? Are you in touch with charlie crawford or any builder groups?
@@failforwardresearch3127 not yet on the groups. I do have built 2 of these and had an oct-x1. I'm still trying to perfect them.
i can help you if you want with your project
I know what the problem is. It doesn't work.
Hahahhaa true
Tá errado assim não vai voar
Alexey îs fake
😂 Мои американские друзья, эта хрень не работает. Гравилет Алексея летает при помощи лески, присмотритесь внимательней к его видео😅
Interesting reminds of working with my uncle on this experiment. Your having the same issue as he did but he solved several issues by listening to me. He was going to incorporate those design changes but died while waiting for the parts to be delivered. I know what the issues were and also know his solution was not going to work the way he was hoping. Chris had one flaw, finance and materials. He wasn't using the correct materials or assembling the flyer so it wasn't tuned. He only started looking at the resonance and tuning aspects at my behest. The vibration is the issue but not the only issue. Your wasting your time on this model without making some serious changes. Trust me I know Chris could not afford to do it right. You need NASA engineered type precision and the disc's have to be tuned. That's not the half of it.
100 percent fake
You mean the graviflyer in general? It's hard to believe it can really fly, and it's hard to believe those videos were faked....that takes expert skill imo.
@@failforwardresearch3127 held up by a string in close ups and held down when out in the field. Propellers on the bottom when outside
what propellers on the bottom? are you even aware how big propellers would need to be to lift 1.6 kilos? shut up dog@@Zane.Wellnitz
@@Zane.Wellnitz How would you imagine there's propellers underneath?
It would be visible outside
Because you can definitely see it from all different perspectives when it goes up in the open
The only way would be to edit them out after filming
Which i don't really think is possible
@@narrativeless404 When he is using it outside he only lets you view it from a distance when using the propeller. And from a distance a moving propeller is translucent. Also if you set the speed of the propeller to match the frame rate of the camera you can make the propellers seem as they we're not moving as well. Or set the speed to be even more translucent.
come pretendi che funzioni? non hai rispettato niente del progetto originale....
蛍光管が光るパワーに注意して下さい、白血病になる可能性があると思います❤
Those alexey chekurkov videos are so scammy. You can practically see the fishing line and thin wire poles in half the videos.
We think it's actually very hard to fake that, but it's also darn near impossible to replicate...so the mystery remains
His videos are very blurry for a reason. Makes it much easier to fake things.
Watch it again, they are old videos and you can see that there is clearly no string or fishing line. If you can't tell then you didn't have enough patience to watch the video through. Alexey swings a tree branch over the top, around the sides and underneath the saucer all while it is levitating. Then he wraps his arm completely around the device. It is only powered/levitating from the copper line connected to giving it electromagnetic pulse
@@ChristianWFL I watched all of the videos. He was clearly being deceptive. His hoop had a separation point in it and he blurred his videos. He also never put his arms near the wire or stick he was using.
He's basically a poor russian farmer performing a few magic tricks to trick westerners who have never seen a magic show.
such nonsense
I'm in the process of making this, but infinitely better. I'll ahow you guys how magnetism really works. This ain't it.
Ok. Could you post a video explaining it?
@@chikapunk4340no 😂