How to replace a pressure switch on a Burisch BT390T BT3150T air compressor

In this episode of GT Air Projects we show you how to swap the pressure switch on a Burisch BT390T / BT3150T air compressor using Burisch X4550 sealant adhesive compound and a few basic hand tools. The compound as well as the pressure switch are available on our website at www.gtair.co.uk

[@tanveernaeem1157]

Great informative presentation. One question though; what kind of orange color selant did you use for the threads. Can you please share the info on the product and a link (if possible) from where this sealant can be purchased from. Thanks.

[@mr.z541]

Just use Teflon tape

[@muntee33]

My motor feed wire AND blue and brown wires were in the opposite position... So the orientation do not matter, only the correspond wire maintains the continuity of each respective circuit?

[@backtonatureitis]

For this particular pressure switch how do you set the kick off and kick on?

[@pollyaloy]

great video

[@grahammayhew7749]

My switch has a larger port is there an adaptor available please?

[@bobbybanogbanog4933]

Apat na wire ba ang gagamitin mga idol

[@bobbybanogbanog4933]

Mayron akong nilagay na ganyan page naka off sumisingaw yong hangin anong dapat Kong gawin

[@bobbybanogbanog4933]

Pa help naman po Kong anong dapat Kong gawin

[@camgines6255]

Replace this on-off switch pressure regulator. unit gets up to eight bar in pressure then the on off switch will press down and release pressure down to 60 and start back over. When the unit gets to eight bar and I unplug it it will stay at 8 bar. Don't know why this is happening. Please help

[@jesusosuna1510]

Thanks

[@Joseph18181001]

thank you we have thesame PS, my problem is how to remove its cover i thoughts the small screw with cover is deferencial or pressure adjusment. now i know😉 more power to YOU!