A compressor troubleshooting video from Sealey. Visit our website www.sealey.co.uk for more information. #Sealey #SealeyTools #AirCompressor #AirCompressorRepair
I have a Paslode air 1.5hp air nailer with a Rol-Air compressor. This summer the compressor would start slow and pop the circuit breaker. I replaced the start-up/run capacitor and it fixed the problem. However two months ago it started doing the same thing again. I tried everything and almost threw it away till I found your video and you stated it could be the extension cord being too long so I tried compressor without my 100 ft extension cord and that fixed my issue. Couldn't believe that a voltage drop from the cord would cause that problem. I tried some heavier gauge cords that were shorter and they also worked! Thanks for the video and useful and less obvious tips!
Thank you! I had a leak under my pressure switch after air filled in tank. Tested the none return valve like you said, I replaced the none return valve and now my compressor is up and running.
youtube most useful social media tool in the net I can live without any other social media out there but without youtube we be going back to the old days when these local profesional used to rip us off all the time now we watch a video and do it ourselves and save a ton of money
My compressor starts fine after a few minutes of running it will stop and won't start again. If I then leave it for about 30 minutes it will start again. I suspect the pressure switch but I haven't changed it yet. Has anybody got any ideas? please.
Just bought one today but there is air leaking from the non return valve straight out of the box. Washer and spring look ok, why is this? Luckily the store is local for a replacement, just curious why this should be happening.
I have a Paslode air 1.5hp air nailer with a Rol-Air compressor. This summer the compressor would start slow and pop the circuit breaker. I replaced the start-up/run capacitor and it fixed the problem. However two months ago it started doing the same thing again. I tried everything and almost threw it away till I found your video and you stated it could be the extension cord being too long so I tried compressor without my 100 ft extension cord and that fixed my issue. Couldn't believe that a voltage drop from the cord would cause that problem. I tried some heavier gauge cords that were shorter and they also worked! Thanks for the video and useful and less obvious tips!
The best explication
Thx sr, i learn a lot to day
Thank you, very good video.
Thank you for advice,you saved me alot of time,my head gasket was leaking.thanks have fun.
Thanks, it was very helpful!
Thank you! I had a leak under my pressure switch after air filled in tank. Tested the none return valve like you said, I replaced the none return valve and now my compressor is up and running.
Excellent information.
That was very helpful. Thank you !
Helped a lot
very useful video,great tips and tricks and told in a way that you don’t need a doctorate
Hi
Amazing, great...
youtube most useful social media tool in the net I can live without any other social media out there but without youtube we be going back to the old days when these local profesional used to rip us off all the time now we watch a video and do it ourselves and save a ton of money
I think i have found the problem with my sgs compressor thanks to this clip
My compressor starts fine after a few minutes of running it will stop and won't start again. If I then leave it for about 30 minutes it will start again. I suspect the pressure switch but I haven't changed it yet. Has anybody got any ideas? please.
Also, check the reduction valve. Sometimes that rubber seal needs some red rubber grease to help it seal. All part of a valve service I guess.
Excellent advice well explained. Will that model be adequate for spraying?
great video, if it is rebranding FINI SUPERTIGER VKM 4020-100-3M ?
Just bought one today but there is air leaking from the non return valve straight out of the box. Washer and spring look ok, why is this? Luckily the store is local for a replacement, just curious why this should be happening.