@@aashish2216 ae hora kun bike ho Ashish ko? Mostly H4 lagirako hunxa..huna tah..aru kunai ho vane namilna sakxa...or else ali modify garera fit garna milla..
I put a fan type led like this in my duke bike. But now the water is trapped inside the headlight bottom side of the park-light. Where did it come from? Did the rubber come through the side of the dust cover? What to do next to prevent water from entering it 🤔
I have a C6 led. But it doest fit. I can't close the head back. As the led fan casing is bigger and it touches the key holder assembly inside the head.
Yes that kinda happens. Make some room by wiggling the wires in the back it should fit. It doesn't touch the key holder, but there might be some wires infront the key holder make sure you keep them sidewise.
@@abhishekshakya287 thanks for the reply. No it is touching the key assembly, that black pipe kind of thing. I just pushed the head back and tightened the screws. But I am sure pressure is being created all the places wer we put screws. Not sure about the outcome.
@@ADITHYA388 Hey man! Do check the gapings from above, there is a gap below the display console. Have a flashlight handy to view inside the head of the bike, you should be able to see the LED fan, if you can see the LED bulky part/fan then the fitting should be fine.
Since it has no problem with my duke, it should be the same for the other Duke's right? Besides, did you get your key assembly changed or got any after market key assembly? As the aftermarket key assembly might have some size differences and the gaping problem might have occurred.
Dashain ko subhakaamana
Muri Muri suvakamana bro...Dashaina ko.
Goo work
👌🏻👌🏻
Big fan bro
Love react gardinu na
Thankyou soo much bro..
Kati ma leko .... I wanna also install one ?
Ma sanga xa ni bro euta spare...line vaye vana na bro..DM ma aau na.
@@abhishekshakya287 H1 HOLA mero socket milxa ta ?
@@aashish2216 ae hora kun bike ho Ashish ko? Mostly H4 lagirako hunxa..huna tah..aru kunai ho vane namilna sakxa...or else ali modify garera fit garna milla..
I put a fan type led like this in my duke bike. But now the water is trapped inside the headlight bottom side of the park-light. Where did it come from? Did the rubber come through the side of the dust cover?
What to do next to prevent water from entering it 🤔
Kaha bata lenu vayeko bro
Ma sanga euta extra xa bro chainxa vane vannu bro.
I have a C6 led. But it doest fit. I can't close the head back. As the led fan casing is bigger and it touches the key holder assembly inside the head.
Yes that kinda happens. Make some room by wiggling the wires in the back it should fit. It doesn't touch the key holder, but there might be some wires infront the key holder make sure you keep them sidewise.
@@abhishekshakya287 thanks for the reply. No it is touching the key assembly, that black pipe kind of thing. I just pushed the head back and tightened the screws. But I am sure pressure is being created all the places wer we put screws. Not sure about the outcome.
@@ADITHYA388 Hey man! Do check the gapings from above, there is a gap below the display console. Have a flashlight handy to view inside the head of the bike, you should be able to see the LED fan, if you can see the LED bulky part/fan then the fitting should be fine.
Since it has no problem with my duke, it should be the same for the other Duke's right? Besides, did you get your key assembly changed or got any after market key assembly? As the aftermarket key assembly might have some size differences and the gaping problem might have occurred.