I was able to fix my car because of your video! Been searching the web and TH-cam for days until I found this video, Thanks, Bud! Honestly, you deserve more views and support for your channel!
i had a 2015 jeep Cherokee doing the same thing, taking down can-c vehicle was still able to shut down but it was very intermittent finally caught it with the bus down and went for the easiest module to unplug the abs. I work at a dealership also usually get a lot of abs modules with internal fault codes but that was my first that took down the bus.
wow, lol, I been here so long I dont even know what the other scanners look like of what they can do. But good point my friend..Thanks for watching. I would love to join your elite group of subscriptions you have there, please consider subscribing, thanks.
Sir can you tell me if the fuel pump must priming fuel every time I put the key on? Because in my hyunday prime only at cold start. After a stop and turn off key, when I swtch on again it won't prime. Please tell me if is normal. And many thanks for your work here.
@@OnlineMechanicTips hyundai i20 pbt 1.2L 2009 classic manual petrol 5 speed. Thank you for anssering my cll. Hope you can help. When start with no prime the car struggle to start and check stays on until start finally.Subscribe now. Thanks
I have the same DTC code the P2533, the car engine turned off when I remove the ABS Control Module Fuse, I did the same and replaced the ABS Control Module with a new one, but the problem stays, the car owner start hating me. PLS HELP :(
My man, thanks for watching and being a subscriber. As for being stuck in park, what exactly do you mean? Are you unable to move the shifter? even so, can you move it using the lock out button above the shifter? The way that sys suppose to work is with key in and on, once you press the brake pedal, the interlock should activate which will allow you to move shifter into gear, which part not working?
Any clue? About i20 hyundai, fuel pump must prime everytime I start the engine? Mine won't prime after a stop and I can't find the answer nowhere. Please help. I subscribe to your channel. Thanks for your expert help.
Hey bud, I just spoke with my Hyundai buddy. He said this may be a glitch in the computer problem. Also that it will not prime back to back every single time you turn key off then on. You should find somebody with a good scan tool that can read inside your pcm/ecu
@@OnlineMechanicTips thanks very much mate! It cross my mind too. I'll go to dealer to tell him about it. I have a friend with tucson and him prime every time. Mine I don't know the moment and the cause for that. All I remember in the past there is no problem with second hard to start situation. Have a great day. I'll keep you informed. Cheers.
Yes you should not do that. Not sure if you out in the real world but when you frustrated, sometime normal thinking suffer. Thanks for watching bud. I hope you got more out of this diagnostic video than just that.
The same thing just happened to my 2011 Chevy cruze. We disconnected the battery and then opened the fuse compartment and found that the fuse for the fuel engine was not there (it was missing) so after about 10 minutes of having the battery disconnected we went into my car and pushed on the break and my car shut off. Super spooky & when we ran a diagnostics test on it, it says no problems were detected.
I was able to fix my car because of your video! Been searching the web and TH-cam for days until I found this video, Thanks, Bud! Honestly, you deserve more views and support for your channel!
Thanks for watching my friend, I really appreciate that.
@@OnlineMechanicTips absolutely right bro you deserve it
i had a 2015 jeep Cherokee doing the same thing, taking down can-c vehicle was still able to shut down but it was very intermittent finally caught it with the bus down and went for the easiest module to unplug the abs. I work at a dealership also usually get a lot of abs modules with internal fault codes but that was my first that took down the bus.
Thank You! I appreciate all your research and info.
Please waych Part 3-THE FIX here: th-cam.com/video/J-HjGgGzw9g/w-d-xo.html
Please watch part 1 first here: th-cam.com/video/y5cQJeWmvzg/w-d-xo.html
That witech makes it easy to see the problem with the bus. I wished gm scanner would do ithat
wow, lol, I been here so long I dont even know what the other scanners look like of what they can do. But good point my friend..Thanks for watching. I would love to join your elite group of subscriptions you have there, please consider subscribing, thanks.
I think I already subscribed to you. Gm is easier to work on but that witech does look good
Who'd of thunk 🤜🤛 good call
Nice video !
Tuning in attentively
lol
Hmm my car won’t shut off, but the intruments still have power too. Is is a bad ignition switch or could it be something else?
Good stuff!
Thanks for watching and subscribing my friend
Awesome video!
Sir can you tell me if the fuel pump must priming fuel every time I put the key on? Because in my hyunday prime only at cold start. After a stop and turn off key, when I swtch on again it won't prime. Please tell me if is normal. And many thanks for your work here.
Hello my friend. Most of the newer cars have that feature. What year your xar? Also are you subscribed to the channel?
@@OnlineMechanicTips hyundai i20 pbt 1.2L 2009 classic manual petrol 5 speed. Thank you for anssering my cll. Hope you can help. When start with no prime the car struggle to start and check stays on until start finally.Subscribe now. Thanks
I have the same DTC code the P2533, the car engine turned off when I remove the ABS Control Module Fuse, I did the same and replaced the ABS Control Module with a new one, but the problem stays, the car owner start hating me. PLS HELP :(
need a computer like this
2012 dodge caravan same problem.....thanks
Can't shut van off
Same year as this van. Did you watch all 3 parts? Do you have a scan tool? Also are you subscribed to the channel?
I have a 2014 town and country and its stuck in park it wont move also traction light is on can it be related?
My man, thanks for watching and being a subscriber. As for being stuck in park, what exactly do you mean? Are you unable to move the shifter? even so, can you move it using the lock out button above the shifter? The way that sys suppose to work is with key in and on, once you press the brake pedal, the interlock should activate which will allow you to move shifter into gear, which part not working?
Hey bro, good job.
Do you already have the video part 3.
I have similar problem with my van same year made.
Yes Part 3 uploaded. It was in the description. Re you using a scan tool? Can you see the modules? And are you subscribed to the channel?
Abs is closest to the bus topigraphicly
good point
If you don’t mind. Can you share the details of the softwares you using to diagnose the problems. Will really apreciate
You can't get access to that sir. I was in a different garage when diagnosis was done
Any clue? About i20 hyundai, fuel pump must prime everytime I start the engine? Mine won't prime after a stop and I can't find the answer nowhere. Please help. I subscribe to your channel. Thanks for your expert help.
Hey bud, I just spoke with my Hyundai buddy. He said this may be a glitch in the computer problem. Also that it will not prime back to back every single time you turn key off then on. You should find somebody with a good scan tool that can read inside your pcm/ecu
@@OnlineMechanicTips thanks very much mate! It cross my mind too. I'll go to dealer to tell him about it. I have a friend with tucson and him prime every time. Mine I don't know the moment and the cause for that. All I remember in the past there is no problem with second hard to start situation. Have a great day. I'll keep you informed. Cheers.
👍
Chrysler is still #1 in my book I don't care what they say
All day..lol
I just replaced the shifter rod in a Ford f350 and now the truck continues to run even with the key out and I am am a complete loss
Part 3 ?
can c is a higher speed and safety item.
Then maybe thats why ABS included...hmmmm
You said don't tighten batteries with electric tools then you just do it. Hypocrite!
Yes you should not do that. Not sure if you out in the real world but when you frustrated, sometime normal thinking suffer. Thanks for watching bud. I hope you got more out of this diagnostic video than just that.
The same thing just happened to my 2011 Chevy cruze. We disconnected the battery and then opened the fuse compartment and found that the fuse for the fuel engine was not there (it was missing) so after about 10 minutes of having the battery disconnected we went into my car and pushed on the break and my car shut off. Super spooky & when we ran a diagnostics test on it, it says no problems were detected.
thanks anyway my problem is 04 BENZ S550