1.8t to 2.0t Coil Conversion + ICM Delete (+ troubleshooting)
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- For the VW Audi AEB 1.8T - conversion to the 2.0T coil packs, deleting the ICM
Wiring explained - original wiring, using the conversion kit, and 924 specific / DIY conversion
Using the 034 wiring harness + the ECS Tuning Coil Conversion kit
Fixing a problem with the car not starting post conversion - engine running only when the cam position sensor is unplugged
Double check the wiring on your own loom, colours vary between engine models and years.
Part of the 924 S 1.8T AEB engine swap, installing the VW Audi engine - DIY project, restomod type thing.
Twitter: / pawnsacrifice
Instagram: / thepawnsacrifice
I am a hobbyist mechanic with no formal training, I am sharing what the work I'm doing on my cars, this is not a guide on what to do, but by all means learn from my mistakes... or prototyping, depending on your positivity.
Doing an AGU/AUQ conversion into an Exige, have been struggling with coil wiring and i think you've just saved me a fair chunk of change on looms/conversions/and plugs. Thank you man!
Fantastic video. Not using the ICM delete patch so this is a great help!!!
thank you sir!!! valuable info, time to make me a harness so i can get to work on time tomorow morning. !\
Nice video man thanks for sharing 🤙🏻
The icm trigger does not go in 1234 order to match the 1234 coil on the agu engine
Good stuff
Do you know which order the AGU engine triggers go?
Another great video...wish I had a pound for every time you said "essentially" though....😅😅👍
Thanks, and yes, I almost burned my computer and my ears when I was doing the edits.
What would be the benefit of doing this conversion, I have an Audi A4 b5 1.8t AJL and thinking about doing this but was wondering how much of an improvement it is
Reliability - I needed to replace at least one coil on mine and kept reading what a pain the ICM is so I took the opportunity to upgrade.
I de pinned my Icm and just plug them in directly from wire to wire
So 1 go to 4 3 go to 2
For the setup I had I just followed the diagram at around the 15min mark - it's been so long now (need to get in and sort the last bits).