How to change Front Brake Pads and Rotors on a 2006 Saturn Vue

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ก.ย. 2024
  • How to change the brake pads and rotors on a 2006 Saturn Vue.
    First off, we're not mechanics. If we can do this job, so can you!
    Second, do this at your own risk. We can't guarantee you'll have the same results.
    1. Mechanics set www.homedepot....
    2. C Clamp www.autozone.c...
    3. Jack stand kit www.homedepot....
    4. Brake Lubricant www.streetside...
    5. Brake Pads www.autozone.c...
    6. Rotors www.autozone.c...

ความคิดเห็น • 29

  • @emmittmartin4610
    @emmittmartin4610 8 หลายเดือนก่อน

    Thank you so much, this video was super helpful!

  • @dylanjackson3287
    @dylanjackson3287 5 ปีที่แล้ว +2

    Thank you for the video! Hope this repair goes well. I love my Saturn vue, now I got to get her in shape for the big boys lol

    • @CJRichvideo
      @CJRichvideo  5 ปีที่แล้ว

      No problem. Glad to help. Good luck on the repair!

  • @ahcomcody
    @ahcomcody 5 ปีที่แล้ว +2

    Thank you for the video! Helped me with my Saturn Vue!

  • @msatchmo
    @msatchmo 4 ปีที่แล้ว

    Nice video. Nice to know i'm not the only one that struggled to get those damn pads in with the new clips. Always fun when it's all greased up too

  • @fuelblue
    @fuelblue 6 ปีที่แล้ว +1

    Thank you so much!! I have my afternoon activity set for tomorrow.

    • @CJRichvideo
      @CJRichvideo  6 ปีที่แล้ว

      Fuelblue awesome. Good luck with everything!

    • @fuelblue
      @fuelblue 6 ปีที่แล้ว

      Everyday CJ Done! Much easier than I thought. Thanks again!

    • @CJRichvideo
      @CJRichvideo  6 ปีที่แล้ว

      Fuelblue awesome. It’s not too difficult. As long as you know the little odds and ends the labor isn’t that bad.

  • @dickmann2308
    @dickmann2308 3 ปีที่แล้ว

    When you are done, make sure you only tighten the lug nuts to the specified pound of torque. If you are using an air wrench, you may over tighten the lug nuts, which can cause problems with the rotors. I know this, because this is what I had done. I backed everything off, and used a torque wrench to final tighten The Lugnuts

    • @mrdave777
      @mrdave777 8 หลายเดือนก่อน

      I think he did fabulous!!!

  • @georgedeamicis2510
    @georgedeamicis2510 6 ปีที่แล้ว +2

    Good job but I'd leave out the grease at the 11:35 mark. No need to have grease on the rotor.

    • @summerofsteroids
      @summerofsteroids 6 ปีที่แล้ว +1

      George DeAmicis Metal on Metal contact should have some sort of lubricant.

  • @frozenlaid554
    @frozenlaid554 4 ปีที่แล้ว

    Tru Tru totally agree 💯 💥🔥🤜🏾🤛 It still helped alot

  • @chrisclermont456
    @chrisclermont456 4 ปีที่แล้ว +1

    You went Alvin & The Chipmunks at 6:10!! LOL

    • @CJRichvideo
      @CJRichvideo  4 ปีที่แล้ว

      Lol my son and wife do like to watch the chipmunks!

  • @JohnDoe-xm8im
    @JohnDoe-xm8im 6 ปีที่แล้ว +1

    Thank you so much

  • @lupitaayala3690
    @lupitaayala3690 5 ปีที่แล้ว

    Thank you very much!!

    • @CJRichvideo
      @CJRichvideo  5 ปีที่แล้ว

      Lupita Ayala you’re welcome. Glad I could help.

  • @joelberlin5252
    @joelberlin5252 3 ปีที่แล้ว

    Dude, thx for the info but man you got to set up your camera so that you are not in front of it while you work.

  • @mitchellclements5600
    @mitchellclements5600 4 ปีที่แล้ว +1

    If you enjoy helping & asking questions there's a page on Facebook for all of us vue fanatics lol go like the page!! "Saturn vue forum" it has 1097 members awesome place for help & also awesome video!!!

  • @frozenlaid554
    @frozenlaid554 4 ปีที่แล้ว

    Ok video but couldn't hardly see because u where right in front of the camera

    • @CJRichvideo
      @CJRichvideo  4 ปีที่แล้ว +1

      Tried my best. Hard to film yourself and work on the vehicle at the same time.

  • @nbunkley77
    @nbunkley77 ปีที่แล้ว

    Socket wrench 🤓

  • @xyzabc3659
    @xyzabc3659 5 ปีที่แล้ว

    Good video; but camera angles leave much to be desired. Spent a lot of time looking at the back of your head or shoulders. Other than that; good, informative video.

    • @CJRichvideo
      @CJRichvideo  5 ปีที่แล้ว +1

      It’s very hard to film yourself. Back when I did this video I didn’t have a tripod either so I had to prop my phone up on a chair. Did the best I could with what I had.

  • @enniosavini6591
    @enniosavini6591 5 ปีที่แล้ว

    Grease on break pads?