The prerequisites are : A BMW supporting ENET, like the F-series A correctly installed ISTA/D A full psdzdata package An ENET cable A correct power supply (no so cheap) to maintain a decent voltage (ex: 13.5V) during the programming session DO NOT PROGRAM AND KEEP THE CAR RUNNING. A 45A capable power supply is a minimum ! It all depends on your car and the number of modules installed. I strongly suggest having SATA SSD, or even better NVME disk on your laptop to speed up the process.
Happy to help, glad it worked for you, if you haven't already please like and subscribe (which supports my channel) and do consider a super thanks, stay blessed sir !
@@claudioagmfilho Hey Claudio, first thanks for the continued support of my channel, and the answer to your question is, I do not know I'm afraid, because I would use ESYS or the official BMW tools, they are NOT user friendly though.
hey mike txs for viewing and your comment if you go to 1:47 you need to set local area network (LAN) IF it does ask you for an IP address, open a CMD prompt, type in ipconfig, and get your ip v4 address, something like 168.1.2.3 nd use that, I couldn't get anything else to work
ALSO make sure your LAN port is working, try connecting to your home network, router or office using the LAN, if it does work, then the ENET cable will work, if not, yourLAN port is kaput, if the LAN works then the cable is faulty, you also need to make sure ISTA works with the USB K CAN, if that works, GENERALLY ISTA is fine and it's your ENET cable
ALSO.. LOL, on mine, it's wouldnt go any further, than checking codes, it will freeze, I even tried another cable, could be my ista, but others have got it to work, I just use my k-can, that works fine
Hey im kinda late. My question: Does the ENET cable also work if your laptop doesn't have an Ethernet port but instead I use an adapter from USB -> Ethernet. So I plug the cable in the adapter. (My normal LAN works fine with the adapter).
Hey Brian, I don't see why not, all the adaptor is doing is taking it to an ethernet, it should, pls try and report back, a lot of new laptops DONT have LAN as majority of people have fast wifi
this particular setup, ie ENET and ISTA will work only with BMW "BASED/OWNED" so MINI and ROLLS ROYCE (yes ROLLS ROYCE is now owned by BMW) other than those 2 no
Hey Philip, in fact you can and I do !, Stay tuned, I have just finished a video (due to edit and upload today) where I use Ista on my f series using K can you can use both, you just need to change the settings as shown, between network and edibias (K can) I swap between them all the time
@@RonyIsaPony I've not done any programming, but from what I've heard there is NO reason you can't if it is able to speak to the DME for Ista to communicate then yes it can, hope this help
Hoping the below information helps thanks for the view and positivity ! ISTA+ (AKA Rheingold or ISTA-D) 1. DIAGNOSTICS for All Vehicles 2. PROGRAMMING for F/I/G/RR & MINI, but requires an ICOM • ISTA-P 1. PROGRAMMING traditionally for all chassis, but F-/I-/G-series phased out with 3.63.5 release (March 2018). 2. ICOM Recommended. An ICOM emulator with K+DCAN or ENET can be used, but will NOT communicate over all protocols to program every ECU. 3. Replacement ECU's must be NEW
Hey, now this is a very good question, something I should consider putting in to a video, in fact I will. ISTA is a BMW tool, it is designed and used on a tablet type device, you switch it on and its there (no loading) switch it off and its gone... On laptops we are using a "hacked" version of ISTA Basically. if there are no processes happening, i.e. clearing codes etc, you CAN just unplug. NO harm will come. On ISTA there is no exit as in most computer programs, I have found when you hit the X at the top left, to END the program, you do get a message, similar to closing down etc. On mine it NEVER does, so I just go to the process's and end the task. My laptop is a dedicated laptop, so shutting down a program or even turning off the laptop does no harm. SO, watch out for my video, but hope that helps explain it !
I'm afraid I dno't know, I only am aware only of the E, F & G series, pls join a BMW forum and ask the question there, Bimmerfest is a good place to start
ty for the video. what if it ask for an IP ADDRESS what do we use?... also wen I try to anter the VIN manually it keeps saying vin is not valid and or not assigned... trying to use it on an F30
NP, no the VIN is not your IP address, if you follow exactly how I do it, your ista should detect your cable and connection and connection to the car, look at timestamp @3:17 if it diesnt, it "usually" is 169.254.11.8 / in my case, another person said it was 169.254.1.1 with a subnet mask of 255.255.0.0
@@AdrianJayeOnline I gave up on that version of ista. trying to download an older version. I could not get the version I had to run. and what I meant was when I try to enter the vin manually into ista, even that wouldnt work, not use the vin as the IP. appreciate the info. if I have any issues with this version will definetly be asking some question.
not sure what you mean by 3x ? this is the first post i'm seeing. you dont say which car, which year, which model, are you even talking about a BMW, pls be more specfic
I have Ista+ from Emanuels online. I can get the car to recognize following your steps. but I can not get past the part where it wants to populat. Do I not have a full version? Any insight would be greatly appreciated.
18 330ix. Following your steps, I can select my car. I noticed the color circle is white. my car is blue. It starts to run. and just runs until it quits. it takes a while to quit. I can take a picture of the error message. I'll run it again. i found another version but couldn't get past the license and key. Any insight would be greatly appreciated. I'm willing to get this to work, so if you need something from me, lmk
@@lwjaa hey there, ok txs, so, when your at the bit you select your car, when you click that, (or select it really) the whole bar is selected, (from the video) go to the bottom make sure STANDARD ICOM is selected (with an X) then click set up connection... what this is doing is creating a IP address to connect to the car... Imagine your home laptop, when you connect to your wifi, you select the wifi and hit connect :) NOW.... at this point it should only take a minute, if it isnt that means that ISTA (laptop) can't connect to the car (WIFI) so that can be a number of things 1> faulty cable 2> Incorrectly configured software 3> Issue with the car... all of the above are over the pervue of a simple reply on youtube, recheck and if still a problem, I'm on bimmerfest, please post there and we can see if we can help further, HTH Adrian
Hello can you share link where to download ISTA+ and buy this enet cable. i have 2011 BMW 328I xdrive. waned diagnognisis. Thank you for taking time to make this video
Hi Mayana, txs for your comments, a friend sent me the software and I got my cable from a local shop, I am in Canada, so I don't know how relevant my info would be, for the software join a BMW forum such as Bimmerfest or 1addicts, most ppl there have links for ista, and cable, just look up BMW obd2 enet cable, you can get them on ebay and also amazon, just google it up
Hi Adrian, nice video, much appreciated on the info, just one question with ISTA where will I find the power windows module for 1 touch press as my passenger window is not going up automatically like all the others I have a BMW F36 GC and if you know it would be a once step instead of hunting for it. Any information would be appreciated, thanks.
Hey txs ! for sure, the FEM controls the front windows the the REM controls the rear ones. The actual module is located in the A-Pillar, front passenger side. If thats bust , a new one needs to be coded with a VIN
Hi Adrian thx for the info I've checked the buttons and both work well the error I get is 030095 I've tried googleing it but can't find what it means if I use ISTA to find the issue will it remove the performance modes I have ?
Nice vid my friend, i was wondering how you lower the rear suspension using ista+ on bmw F11. I keep getting sensors and not actual height adjustment. Any ideas? Thanks
TBH I'm not sure, I've never done that, but I believe an ENET cable will work, as the ISTA software is the same, give it a try, wont hurt nothing and then respond back here
hi which end is not plugging in, the OBD end or the lan end, I've seen this on some computers, sometimes the lan cable or port is like flush and you need to pull it down, if it's the obd2 end, it is a simple push fit, should not be clipped in at all, does depend on the cable, let me know which end pls, if laptop end, give me the laptop model number pls
@@AdrianJayeOnline OBD end. It's tight for my 2017 X5 and my wife's 2020 X4M. This is the one I bought: OHP ENET Cable BMW OBD | ICOM E-SYS ISTA | Bootmod3 Bimmercode F- Series OBD2 | Germany Made Heavy Duty Cable
@@drzpapi413 ahh ok, so no way it should be tight, it's jiust a loose push fit, I do NOTICE that there is a little clip which is there, if you look at the bimmergeeks cable, (www.bimmergeeks.net/product-page/bimmergeeks-pro-cable) they clip is missing, sometimes that causes problems, also it can cause you not to be able to pull the cable out easily, do make sure the pins are not bent, should NOT be a tight fit, I can't really offer any support on this, due to the nature of youtube, I am on a site called bimmerfest, do post there and we can exchange screenshots etc. or do talk to the supplier
I have an F11 and ENET cable, I followed this but no luck I downloaded my ISTA from Bimmergeeks and it's 4.39.20, fresh install and nothing shows up on ISTA when I try to complete vehicle identification. How can I troubleshoot?
It's not eazy to TS on text on youtube, you can try the below, if that does not work, come find me on bimmerfest.com. enable ENET programming in ISTA ------------------------------------------------------- A configuration file is located in your `ISTA\TesterGUI\bin\Release` folder : ISTAGUI.exe.config Don't be overwhelmed by this fat XML file, you just have to look for `` and then add or replace a couple of keys : `BMW.Rheingold.ISTAGUI.enableENETprogramming` to "true" `BMW.Rheingold.Programming.ExpertMode` to "true" `BMW.Rheingold.Programming.Enabled` to "true" Alternatively, you can add entries to the Windows registry rather than editing the configuration file : in `HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold` you would add the same keys, with the following string value : True
Adrian - all of the video is fine, but missing the most critical part: setting the COM port in the PC (the ISTA part is easy). The ethernet has to connect to COM1 and my laptop did not automatically "see" the ethernet connection - which under the IPV4 properties MUST BE SET to 169.254.1.1 and subnet mask of 255.255.0.0; so I have tried to create a "soft" COM1 part, but I still cannot complete identification on the Operations tab w/o getting the check cable or PAD error message. Ideas? Thanks!
HI Allan, thanks for the comments, I did not need to do anything, i.e. set any com port up, I simply plugged in the cable into my Ethernet port, exactly has shown, it detected the ethernet port and ISTA assigned 169.254.1.1 as you can see at timestamp @3.17 I have heard of the PAD error message, it's usually an issue with ista, where did you get it and what version ? There isnt enough room or ability on this channel to diagnose, I would suggest joining bimmerfest forum, where you can share screengrabs and we can have a proper conversation on line.
In Ista / Reingold, it uses databases. So basically the PROGRAM it self has different versions, but it is a BASE program. It relies on being updated by various databases. This connects to your car. IF the databases are wrong, you'll have a problem. I would suggest to make sure you have all the proper databases, you could go to Bimmerfest (BMW forum) and ask on the coding section, somone may have a link for the correct databases. Hope this helps
hi there, the cable "itself" doesn't do anything, except interface with a program which will do that, you would need either Ista, Esys bimmerlink (or bimmercode)
not sure, it could be you don't have edibias set up, or it could be a wierd version or older version of Ista, even my older version had this, there is a program on line of you google for it, which would help, I can't remember what it's called now, also try asking the question on bimmerfest or 1addicts
pls go to bimmerfest or bimmerpost or 1addicts, take a look at the programming forums, or you can google ista bmw, the software is free, i don't have the links, thanks for watching, pls like and subscribe
Thanks for the video mate. I’m facing a problem trying to connect ista to my f22 via obd. My enet to obd cable is def working I’m getting the error: “The vehicle could not be identified successfully. Check vehicle interface and PAD active”. I’m not sure what to do as all the advices I could find do not work
ahh, yes... hmmm, I had that, do you know what version of ista your using, I can't remember where it is, if your stuck let me know, it could be you have an older version of ista, that happened to me I had to update mine, but let me know your version, I@ll check mine, it's on another laptop I "think" mine is 4.29
Guy's I've got a giveaway, if you wanna win one of these cables, goto my link below, if your unlucky you can still buy one, with a discount, the promo-code is on the channel th-cam.com/video/Yk5x6S2QP3U/w-d-xo.html
thanks for watching and commenting, not a very good description, not sure how I can help, this video has helped a lot of people please see the comments
The prerequisites are :
A BMW supporting ENET, like the F-series
A correctly installed ISTA/D
A full psdzdata package
An ENET cable
A correct power supply (no so cheap) to maintain a decent voltage (ex: 13.5V) during the programming session DO NOT PROGRAM AND KEEP THE CAR RUNNING. A 45A capable power supply is a minimum ! It all depends on your car and the number of modules installed.
I strongly suggest having SATA SSD, or even better NVME disk on your laptop to speed up the process.
Working at my first try, omg you are genius brother, thank you so much
Happy to help, glad it worked for you, if you haven't already please like and subscribe (which supports my channel) and do consider a super thanks, stay blessed sir !
Thank you. I’ve had this dang cable in a bag brand new and haven’t used it because I couldn’t connect it. Now it’s working. Thank you thank you 🙏
Awesome dude, glad I could help, txs for watching, if you haven't done so already, please like and subscribe !
Thanks man, I've had terrible hassle getting mine to connect; going to try this tomorrow.
Let me know how it works out for you !
You’re a real helper for me todat
my pleasure !
Thanks mate, your video was a lifesaver!
Glad it helped! zytek, dont forget to like and subscribe ! :) adrian
Thanks man 🤝🏽
no problem any time, glad you found my video, txs for watching
🇧🇷🇧🇷🇧🇷👏🏻👏🏻, Thank you, that was so awesome. I really appreciate it !
txs Claudio
@@AdrianJayeOnline could you please tell me what is better the VCX or the icom next or the icom a2 + b + c?
@@claudioagmfilho Hey Claudio, first thanks for the continued support of my channel, and the answer to your question is, I do not know I'm afraid, because I would use ESYS or the official BMW tools, they are NOT user friendly though.
Thank you!
my pleasure !
Thank you mate
my pleasure !
Hey thanks for your video. By chance did you do some network settings before? I can’t seems to connect using ENET cable.
hey mike txs for viewing and your comment if you go to 1:47 you need to set local area network (LAN) IF it does ask you for an IP address, open a CMD prompt, type in ipconfig, and get your ip v4 address, something like 168.1.2.3 nd use that, I couldn't get anything else to work
ALSO make sure your LAN port is working, try connecting to your home network, router or office using the LAN, if it does work, then the ENET cable will work, if not, yourLAN port is kaput, if the LAN works then the cable is faulty, you also need to make sure ISTA works with the USB K CAN, if that works, GENERALLY ISTA is fine and it's your ENET cable
also no network settings need to be set on the laptop, LAN either works or doesnt, make sure it's not disabled in device manager in windows
ALSO.. LOL, on mine, it's wouldnt go any further, than checking codes, it will freeze, I even tried another cable, could be my ista, but others have got it to work, I just use my k-can, that works fine
Hey im kinda late. My question: Does the ENET cable also work if your laptop doesn't have an Ethernet port but instead I use an adapter from USB -> Ethernet. So I plug the cable in the adapter. (My normal LAN works fine with the adapter).
Hey Brian, I don't see why not, all the adaptor is doing is taking it to an ethernet, it should, pls try and report back, a lot of new laptops DONT have LAN as majority of people have fast wifi
wondering if this works?
It does 😂 I ran a usb c to Ethernet to a 50ft Ethernet cable to a Ethernet adapter to a obd cable and it worked no problem
@@table196 Haha thanks for coming back to this question. I sadly couldn't test it since I dont have a bmw for about 1/2 more months.
I have a question, can this kit be used for any other car other than the BMW ?
this particular setup, ie ENET and ISTA will work only with BMW "BASED/OWNED" so MINI and ROLLS ROYCE (yes ROLLS ROYCE is now owned by BMW) other than those 2 no
awesome vid thanks. Is it still possible to use K+Dcan cable with ista D for F series or does it have to be ENET ?? cant find the answer anywhere.
I've tried a K+Dcan cable on an F60 Mini Cooper and it worked alright for scanning codes. From what I understand you can't program with it.
Hey Philip, in fact you can and I do !, Stay tuned, I have just finished a video (due to edit and upload today) where I use Ista on my f series using K can
you can use both, you just need to change the settings as shown, between network and edibias (K can) I swap between them all the time
@@RonyIsaPony I've not done any programming, but from what I've heard there is NO reason you can't if it is able to speak to the DME for Ista to communicate then yes it can, hope this help
Here's the Video, th-cam.com/video/YmZdaXGjvEU/w-d-xo.html
Amazing video thank you
But Can l use ista p and ista d on this cable?
Hoping the below information helps thanks for the view and positivity !
ISTA+ (AKA Rheingold or ISTA-D)
1. DIAGNOSTICS for All Vehicles
2. PROGRAMMING for F/I/G/RR & MINI, but requires an ICOM
• ISTA-P
1. PROGRAMMING traditionally for all chassis, but F-/I-/G-series phased out
with 3.63.5 release (March 2018).
2. ICOM Recommended. An ICOM emulator with K+DCAN or ENET can be
used, but will NOT communicate over all protocols to program every ECU.
3. Replacement ECU's must be NEW
How do we safely disconnect after reading some fault codes? Close ISTA and pull the cable?
Hey, now this is a very good question, something I should consider putting in to a video, in fact I will. ISTA is a BMW tool, it is designed and used on a tablet type device, you switch it on and its there (no loading) switch it off and its gone...
On laptops we are using a "hacked" version of ISTA
Basically. if there are no processes happening, i.e. clearing codes etc, you CAN just unplug. NO harm will come.
On ISTA there is no exit as in most computer programs, I have found when you hit the X at the top left, to END the program, you do get a message, similar to closing down etc.
On mine it NEVER does, so I just go to the process's and end the task.
My laptop is a dedicated laptop, so shutting down a program or even turning off the laptop does no harm.
SO, watch out for my video, but hope that helps explain it !
Was muss ich auswählen wenn ich e und d modelle auslese? Nur kabel tauschen oder muss das immer in den einstellungen gewechselt werden
I'm afraid I dno't know, I only am aware only of the E, F & G series, pls join a BMW forum and ask the question there, Bimmerfest is a good place to start
ty for the video. what if it ask for an IP ADDRESS what do we use?... also wen I try to anter the VIN manually it keeps saying vin is not valid and or not assigned... trying to use it on an F30
NP, no the VIN is not your IP address, if you follow exactly how I do it, your ista should detect your cable and connection and connection to the car, look at timestamp @3:17 if it diesnt, it "usually" is 169.254.11.8 / in my case, another person said it was 169.254.1.1 with a subnet mask of 255.255.0.0
@@AdrianJayeOnline I gave up on that version of ista. trying to download an older version. I could not get the version I had to run. and what I meant was when I try to enter the vin manually into ista, even that wouldnt work, not use the vin as the IP. appreciate the info. if I have any issues with this version will definetly be asking some question.
3x what and can u read fault codes with this on older cars too?
not sure what you mean by 3x ? this is the first post i'm seeing. you dont say which car, which year, which model, are you even talking about a BMW, pls be more specfic
@@AdrianJayeOnline u said 3x in the vid
I have Ista+ from Emanuels online. I can get the car to recognize following your steps. but I can not get past the part where it wants to populat. Do I not have a full version? Any insight would be greatly appreciated.
what car do you have, do you get the first screen but it does not populate at all, do you get any error messages
18 330ix. Following your steps, I can select my car. I noticed the color circle is white. my car is blue. It starts to run. and just runs until it quits. it takes a while to quit. I can take a picture of the error message. I'll run it again. i found another version but couldn't get past the license and key. Any insight would be greatly appreciated. I'm willing to get this to work, so if you need something from me, lmk
@@lwjaa hey there, ok txs, so, when your at the bit you select your car, when you click that, (or select it really) the whole bar is selected, (from the video) go to the bottom make sure STANDARD ICOM is selected (with an X) then click set up connection... what this is doing is creating a IP address to connect to the car... Imagine your home laptop, when you connect to your wifi, you select the wifi and hit connect :) NOW.... at this point it should only take a minute, if it isnt that means that ISTA (laptop) can't connect to the car (WIFI) so that can be a number of things 1> faulty cable 2> Incorrectly configured software 3> Issue with the car... all of the above are over the pervue of a simple reply on youtube, recheck and if still a problem, I'm on bimmerfest, please post there and we can see if we can help further, HTH Adrian
@@lwjaa also 2018 330ix should run ista+ with enet
Hello can you share link where to download ISTA+ and buy this enet cable. i have 2011 BMW 328I xdrive. waned diagnognisis. Thank you for taking time to make this video
Hi Mayana, txs for your comments, a friend sent me the software and I got my cable from a local shop, I am in Canada, so I don't know how relevant my info would be, for the software join a BMW forum such as Bimmerfest or 1addicts, most ppl there have links for ista, and cable, just look up BMW obd2 enet cable, you can get them on ebay and also amazon, just google it up
www.1addicts.com/forums/
Hi Adrian, nice video, much appreciated on the info, just one question with ISTA where will I find the power windows module for 1 touch press as my passenger window is not going up automatically like all the others I have a BMW F36 GC and if you know it would be a once step instead of hunting for it. Any information would be appreciated, thanks.
Hey txs ! for sure, the FEM controls the front windows the the REM controls the rear ones. The actual module is located in the A-Pillar, front passenger side. If thats bust , a new one needs to be coded with a VIN
are you sure it's not the switch, as the passenger and driver would be broke, also google "reset BMW windows"
Hi Adrian thx for the info I've checked the buttons and both work well the error I get is 030095 I've tried googleing it but can't find what it means if I use ISTA to find the issue will it remove the performance modes I have ?
Also the ip address that you showed in your video where did that come from is it the module on the car that gave that ip?
Hi Adrian this might sound stupid, well a window still work if the power window fuse is blown?
Nice vid my friend, i was wondering how you lower the rear suspension using ista+ on bmw F11. I keep getting sensors and not actual height adjustment. Any ideas? Thanks
HI Virgo, thanks for the comment, I'm afraid I don't know, but I also don't think that is possible. HTH thanks for watching !
can you use this on older e series cars, i have a enet cable for my f30 and dont want to order a K dcan cable if i dont have too
TBH I'm not sure, I've never done that, but I believe an ENET cable will work, as the ISTA software is the same, give it a try, wont hurt nothing and then respond back here
the k can cable to work you must have ediabas for that
I used kcan cable on my e88, i think it was an option for enet cable but my kan cable worked fine
F30 is not an E series. it is a F series. all enet cables should do it.
@@spamiser8991 ape brain, I'm asking for my e46 no shit f30 is f chassis
Sir. My OBD2 to Ethernet is not plugging in. I don't want to force it. Is this normal?
hi which end is not plugging in, the OBD end or the lan end, I've seen this on some computers, sometimes the lan cable or port is like flush and you need to pull it down, if it's the obd2 end, it is a simple push fit, should not be clipped in at all, does depend on the cable, let me know which end pls, if laptop end, give me the laptop model number pls
@@AdrianJayeOnline OBD end. It's tight for my 2017 X5 and my wife's 2020 X4M.
This is the one I bought:
OHP ENET Cable BMW OBD | ICOM E-SYS ISTA | Bootmod3 Bimmercode F- Series OBD2 | Germany Made Heavy Duty Cable
@@drzpapi413 ahh ok, so no way it should be tight, it's jiust a loose push fit, I do NOTICE that there is a little clip which is there, if you look at the bimmergeeks cable, (www.bimmergeeks.net/product-page/bimmergeeks-pro-cable) they clip is missing, sometimes that causes problems, also it can cause you not to be able to pull the cable out easily, do make sure the pins are not bent, should NOT be a tight fit, I can't really offer any support on this, due to the nature of youtube, I am on a site called bimmerfest, do post there and we can exchange screenshots etc. or do talk to the supplier
Thanks for the video, Where can I get Ista p and Ista +
google up, there are a few p[laces which have it or goto a BMW forum and ask there, bimmerfest for example, I don't have any links
I have an F11 and ENET cable, I followed this but no luck I downloaded my ISTA from Bimmergeeks and it's 4.39.20, fresh install and nothing shows up on ISTA when I try to complete vehicle identification. How can I troubleshoot?
It's not eazy to TS on text on youtube, you can try the below, if that does not work, come find me on bimmerfest.com.
enable ENET programming in ISTA
-------------------------------------------------------
A configuration file is located in your `ISTA\TesterGUI\bin\Release` folder : ISTAGUI.exe.config
Don't be overwhelmed by this fat XML file, you just have to look for `` and then add or replace a couple of keys :
`BMW.Rheingold.ISTAGUI.enableENETprogramming` to "true"
`BMW.Rheingold.Programming.ExpertMode` to "true"
`BMW.Rheingold.Programming.Enabled` to "true"
Alternatively, you can add entries to the Windows registry rather than editing the configuration file :
in `HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold`
you would add the same keys, with the following string value : True
where did you buy this cable? looks solid!
I forget now, it was a place here in TO, please see my pinned comment on another source and a chance to win one
Adrian - all of the video is fine, but missing the most critical part: setting the COM port in the PC (the ISTA part is easy). The ethernet has to connect to COM1 and my laptop did not automatically "see" the ethernet connection - which under the IPV4 properties MUST BE SET to 169.254.1.1 and subnet mask of 255.255.0.0; so I have tried to create a "soft" COM1 part, but I still cannot complete identification on the Operations tab w/o getting the check cable or PAD error message. Ideas? Thanks!
HI Allan, thanks for the comments, I did not need to do anything, i.e. set any com port up, I simply plugged in the cable into my Ethernet port, exactly has shown, it detected the ethernet port and ISTA assigned 169.254.1.1 as you can see at timestamp @3.17 I have heard of the PAD error message, it's usually an issue with ista, where did you get it and what version ? There isnt enough room or ability on this channel to diagnose, I would suggest joining bimmerfest forum, where you can share screengrabs and we can have a proper conversation on line.
BTW my search broadcast was 255.255.255.255 @1:55 perhaps it is different depending on your laptop or car connection ?
Hello, I receive an error saying that the vehicle is incompatible with the current brand setting, any ideas please?
In Ista / Reingold, it uses databases. So basically the PROGRAM it self has different versions, but it is a BASE program. It relies on being updated by various databases. This connects to your car. IF the databases are wrong, you'll have a problem. I would suggest to make sure you have all the proper databases, you could go to Bimmerfest (BMW forum) and ask on the coding section, somone may have a link for the correct databases. Hope this helps
Ista is also a MINI Rolls Royce software so you MUST make sure you have all the right software and databases
Do I need BMW standard tools if yes which one please with ISTA+
Hey Adam, I use ista+ but it should work with the full Reingold suite, i.e. winkp, esys etc
Ok thanks I’ll take a look
Where can I get software cable didn't come with it?
@@rlljr103082 if you google there are lots of retailers mainly amazon, I'll be doing a video shortly for a retailer with a promo code
can i unlock my CarPlay with the BMW Enet Kabel for my G30, 2019. or needs someone from BMW to do that?
hi there, the cable "itself" doesn't do anything, except interface with a program which will do that, you would need either Ista, Esys bimmerlink (or bimmercode)
i dont have the menu to choose the type of cable. have ethernet dont get how to get it to work
not sure, it could be you don't have edibias set up, or it could be a wierd version or older version of Ista, even my older version had this, there is a program on line of you google for it, which would help, I can't remember what it's called now, also try asking the question on bimmerfest or 1addicts
could try this mega.nz/file/T0JyEAbQ#0dCExEqiyQzxPdCswgC9DWwZP77hSicDN9SUXrT4bp4
Hello bro can you share the software pls link?
pls go to bimmerfest or bimmerpost or 1addicts, take a look at the programming forums, or you can google ista bmw, the software is free, i don't have the links, thanks for watching, pls like and subscribe
Openport 2.0 clone works?
should do says it supports
CAN 2.0 (CAN/ISO15765)
K-line (ISO9141/ISO14230(KWP2000)/dual K line)
no guarantees ! ;)
I do the install yesterday with openport clone and can confirm it worked, Thanks.@@AdrianJayeOnline
@@everttaube4089 HEYYYYY good job txs for getting back to me
Thanks for the video mate. I’m facing a problem trying to connect ista to my f22 via obd. My enet to obd cable is def working
I’m getting the error: “The vehicle could not be identified successfully. Check vehicle interface and PAD active”. I’m not sure what to do as all the advices I could find do not work
ahh, yes... hmmm, I had that, do you know what version of ista your using, I can't remember where it is, if your stuck let me know, it could be you have an older version of ista, that happened to me I had to update mine, but let me know your version, I@ll check mine, it's on another laptop I "think" mine is 4.29
@@AdrianJayeOnline I have the same issue, the vehicle could not be identified. The ISTA version I have is 4.29.
Guy's I've got a giveaway, if you wanna win one of these cables, goto my link below, if your unlucky you can still buy one, with a discount, the promo-code is on the channel
th-cam.com/video/Yk5x6S2QP3U/w-d-xo.html
man sieht besser dieZähne vom kleinen im Hintergrund als wo wann jetzt die Einstellung im ISTA mach.
LOL ja, das stimmt, sie ist jetzt 12 :) Danke fürs zuschauen
Haha not working at all
thanks for watching and commenting, not a very good description, not sure how I can help, this video has helped a lot of people please see the comments