How to install car stereo for beginners DIY

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ก.ย. 2016
  • How to Install a DUAL XDVD236BT double din car stereo from start to finish for beginners.
    Hello everyone Crimped connections are preferred method used by most professional installers Here is a link to a full tutorial on how to make crimp connections, heat shrink and splice wires: • Automotive Wire termin...
    Sometimes for car stereos I just use electrical tape. Mainly because I am constantly changing stereos or components and don't want to have to cut the wires every time I change something. I have a lot of experience with taping so I don't have any issues but the "professional" method would be to use crimp connections.
    To help support the channel donations can be accepted here:
    www.paypal.me/8bitFlashback
  • บันเทิง

ความคิดเห็น • 283

  • @D.I.Y._All-in-One
    @D.I.Y._All-in-One  7 ปีที่แล้ว +26

    Hello everyone Crimped connections are preferred method used by most professional installers Here is my link to a full tutorial on how to make crimp connections, heat shrink and splice wires: www.youtube.com/watch?v=887c1...

    • @mikeguient583
      @mikeguient583 7 ปีที่แล้ว +2

      C.L.S. Allinone

    • @diablito_9163
      @diablito_9163 7 ปีที่แล้ว

      C.L.S. Allinone (#####

    • @hillaryseib7358
      @hillaryseib7358 6 ปีที่แล้ว

      didn't know that

    • @emanuelcortina7176
      @emanuelcortina7176 6 ปีที่แล้ว

      C.L.S. Allinone amigo disculpa donde puedo encontrar el adaptador para una mercury mountainner 2003

    • @brigittebabchuk4504
      @brigittebabchuk4504 6 ปีที่แล้ว

      My stereo won't won't I got everything hooked up rigjt but I don't have another red wire on my stock harness or a blue one for the power antenna were do I put them

  • @MyraArcadia
    @MyraArcadia 4 ปีที่แล้ว +9

    oh my god i spent weeks trying to search on how to, this helped me a lot thanks!

  • @Kenniii3
    @Kenniii3 3 ปีที่แล้ว +2

    Very nice video. Easy to follow without a bunch of distracting chatter

  • @justinburchett1372
    @justinburchett1372 2 ปีที่แล้ว +1

    Great video. Wish life was this easy 😔😔

  • @itsmephil2255
    @itsmephil2255 4 ปีที่แล้ว +2

    This is the most easy to follow double din install vid iv watched
    Thanks for making it so simple to follow

  • @aqui7817
    @aqui7817 6 ปีที่แล้ว +3

    Great video thanks

  • @stevestolarczyk8972
    @stevestolarczyk8972 4 ปีที่แล้ว +9

    Thank you for this. Our son just got a used Chevy Aveo. We bought a new stereo but were at a complete loss as to how we install it. This helped a lot.

  • @johnnywayne3443
    @johnnywayne3443 5 ปีที่แล้ว +30

    Love the light Porn music in the background.

  • @JohnKaufmann
    @JohnKaufmann 6 ปีที่แล้ว +1

    Well done. Thx

  • @kriminalxrr
    @kriminalxrr 7 ปีที่แล้ว +62

    looks simple enough, guess Im buying a new stereo.

    • @quintonmorris11
      @quintonmorris11 5 ปีที่แล้ว +6

      rip

    • @matthewjackson9615
      @matthewjackson9615 4 ปีที่แล้ว +3

      Sure, he's got wire splayed out everywhere like a roosters tail. Not messy at all, how easy.

    • @user-uq8by6iw3r
      @user-uq8by6iw3r ปีที่แล้ว

      Have a fire extinguisher ready just in case

  • @danielrickel8807
    @danielrickel8807 3 ปีที่แล้ว +1

    Looks great

  • @nicholasvonrhine541
    @nicholasvonrhine541 4 ปีที่แล้ว +1

    Outstanding.

  • @Soldier1287
    @Soldier1287 5 ปีที่แล้ว

    I got the Xnav267bt
    confused.
    I got a touch screen stereo and soldered all the wires except for the ones described below vvvv
    The last wire thats on the aftermarket harness for
    my car is pink "12 volt ignition/switched"
    the aftermarket radio harness wores left are "ACC B+", "Reverse +", "Remote turn on +", and pink wore that says "brake" that says must be connected to watch video properly.
    i looked up the ignition/switched and acc. They both sound pretty similar. Can they go together?

  • @roberttaylor1380
    @roberttaylor1380 7 ปีที่แล้ว +3

    Thanks for the help, eventing worked out perfect!

  • @peterorthmann5612
    @peterorthmann5612 3 ปีที่แล้ว +1

    I live in a motor home and will feed the unit off the battery solar-powered RV battery bank. (So I can use t when parked) I am less than novice qualified but I was planning to run both the hot (yellow) and acc (red) to the feed from the batteries. Will that work? What do I connect the ILL wire to? thanks

  • @benbrenizer7712
    @benbrenizer7712 7 ปีที่แล้ว +1

    great video i watched lots others before and they didnt help but yours did

  • @wyanecool9963
    @wyanecool9963 3 ปีที่แล้ว +5

    how about using zip ties to keep those connections twisted and electric safe

  • @Inexoria
    @Inexoria 7 ปีที่แล้ว +2

    Hey serious question here. Just bought this as my first lcd unit. After hooking it up to test, the screen is black but the buttons around it light up (only with my lights on unfortunately). Do I have to reset it maybe, or did I miss something? almost like it set itself to standby but won't come on. What are some things I can try? thanks in advance

  • @JustAnAccountLmao810
    @JustAnAccountLmao810 2 ปีที่แล้ว

    Hey I got the same radio but a different version , quick question when playing music from the aux or Bluetooth do it show the song you’re playing or just a generic music logo .. thanks man

  • @rebeccaembury2616
    @rebeccaembury2616 3 ปีที่แล้ว

    I just replaced my stock radio in my 2006 Nissian Xterra with a pioneer head unit. I turned my ignition over to make sure everything worked properly and I didnt get any power to the new stereo. Is this because I dont have the ground ran? In stock nissian radios the ground is ran with the antenna wire.

  • @cotorro6713a
    @cotorro6713a ปีที่แล้ว

    Hello, how are you? I wanted to ask you a question. Have you installed a c2r gm29 interface? do you have any video? I installed one in my 08 yukon and when the radio turns on it makes a noise like static, do you have any idea what it could be? Thank you

  • @emanuelcortina7176
    @emanuelcortina7176 6 ปีที่แล้ว

    I have a mercury mountainer can you tell me what k I do ? Please

  • @tracywagoner7613
    @tracywagoner7613 4 ปีที่แล้ว

    What does the brown wire go to on a 650Blaupunkt doubke din radio

  • @mudpitboarder
    @mudpitboarder 5 ปีที่แล้ว

    Awesome, down to the point video !

  • @albertguevara3523
    @albertguevara3523 7 ปีที่แล้ว

    C.L.S allinone yes I figured it out for some reason it was my connector harness was different from my wires that were connected.. thanks for the help if I didn't look n find out I wouldve just taken it to professions n I know they charge a lot.

  • @NessaAnne92
    @NessaAnne92 7 ปีที่แล้ว +2

    So I have a 2005 chevy Colorado and I've wired everything I believe correctly and ground the wire and even bought the antenna adapter and I still can't figure out why I'm getting no power at all

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      You need to use test light to check 12 volt constant , 12 volt ignition and ground wires. Hold one end of test light on ground wire and other on 12 volt wire if it doesn't light up check other ground locations "any solid metal surfaces". If it lights up with different ground location it means ground was bad. If it still does not light up check fuses for 12 volt power.

  • @autobotrock4789
    @autobotrock4789 4 ปีที่แล้ว +1

    I bought an fm transmitter to put in my '94 Accord since it's missing a radio but after finding out about these things I'm really interested in installing this instead. Would be nice to have some of the creature comforts I'm used to in my commuter while I'm delivering mail.

  • @terrybreen3331
    @terrybreen3331 4 ปีที่แล้ว

    Thanks CLS, I have an Axxera, looks just like the unit you installed, but I want to power it without have to turn on the ignition switch, what would you suggest? What does the extra yellow power wire do?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  4 ปีที่แล้ว

      Just connect the red wire on the stereo to the yellow wire on the car.

    • @terrybreen3331
      @terrybreen3331 4 ปีที่แล้ว +1

      @@D.I.Y._All-in-One OK, Thanks!

  • @michaelcastillo3349
    @michaelcastillo3349 2 หลายเดือนก่อน

    Wat if the main wire harnes doesn't have the yellow wire wat other color could it be on the main wire harness

  • @phreddibrandyburg7880
    @phreddibrandyburg7880 4 ปีที่แล้ว

    My duel aftermarket stereo on my 2011 chevy malibu causes my dashboard lights to go out whenever the car is started???help me I dont know what's wrong

  • @papamiperemi1586
    @papamiperemi1586 7 ปีที่แล้ว

    Thanks for your video. Very helpfull. Any possibility to convert a 1di to 2din in hyundai santa fe model CM, year 2006? I f yes, Do I need to buy a 2din cage or the aftermarket come with one like i am seeing in this demonstration?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว +1

      Papami Peremi unfortunately there probably is not enough room for 2 din stereo. You can google your car model + 2 din stereo to see if there is a conversion dash kit for yours. Also Dual makes a stereo that is single din with a 7 inch motorized pop out screen that might be a good alternative for you.

    • @papamiperemi1586
      @papamiperemi1586 7 ปีที่แล้ว

      Thanks you for your advice.

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Papami Peremi your welcome

  • @armandosalgado5223
    @armandosalgado5223 4 ปีที่แล้ว

    Can any kit fit this radio ? I have a corolla s 2006 with this same radio but where can I get a kit ?

  • @jaytravel-12
    @jaytravel-12 4 ปีที่แล้ว

    will this work for 2006 ford f150 xlt

  • @butsukuy12
    @butsukuy12 6 ปีที่แล้ว

    Great video thanks you explained it perfectly. So everything's is color coded, my stock stereo has multiple connections 6 to be exact. I have a 2005 honda accord EX with factory navigation and dual AC. Its not working and im trying to replace it.

  • @jjwrld2228
    @jjwrld2228 3 ปีที่แล้ว +2

    My screen won’t turn on......

  • @edmurr951
    @edmurr951 5 ปีที่แล้ว

    Thanks for the info

  • @Astrobotp19
    @Astrobotp19 7 ปีที่แล้ว +1

    Hello..I installed a reverse camera to this stereo but the screen is black. When I put reverse that's when I see the reverse camera turn on. Do you know what I did wrong? Thanks

    • @dannythegreat948
      @dannythegreat948 6 ปีที่แล้ว

      that's how it works on this model only when on reverse it would come up on screen

  • @alcifrerdewich2323
    @alcifrerdewich2323 6 ปีที่แล้ว

    no fm antenna?

  • @spacedad1853
    @spacedad1853 5 ปีที่แล้ว

    Do you mind questions? Please. The new stereo has wires that the harness doesn't have, nor did you mention them. The pinks are obvious; front/rear cameras. The 5 others are the questionable ones.
    (Wires 1-3) Have 3 wires for Steering wheel control (Gray = SWC 1, Green = SWC 2 and Black (fine) = SWC Ground.) Do I need that separate ($50) SWC? Or can I pull out one of the wires from the the other connectors that were in the stock unit?
    (4) Blue (B+) (2nd blue w/o white stripe) = Amplifier Control and (5) Brown = Brake (B-).
    Also, I notice your harness kit had the connectors. My harness didn't. Wondering, if I got the wrong brand harness.

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  5 ปีที่แล้ว +1

      SWC will be specific for whatever vehicle you are using some vehicles require a separate module and some don't . Wire harnesses are specific for vehicles as well most are designed to plug right in to you stock wire harnesses and sometimes not all stock connectors get used. My video just kind of covers a basic install to get power and sound working everything else becomes a learning experience to figure out.

    • @spacedad1853
      @spacedad1853 5 ปีที่แล้ว

      Truth! It is a learning experience, taught by digging in. Thanks for your reply. Trying to get answers w/o sifting online. Starting to piece some of it together. You're so right, I would just need to fish around inside. My new deck seeems to have the SWC built in; set of wires out of deck. Time is required to figure out which wires from van. Thanks for your time.

  • @Jason-uh7ml
    @Jason-uh7ml 3 ปีที่แล้ว

    How do you wire an amp to this exact stereo. All I have is a blue black and a blue wire.... NO BLUE WHITE

  • @darrennunnery639
    @darrennunnery639 7 ปีที่แล้ว +10

    08 pontiac grand prix i bought a dual xdm16bt radio and the adapter wired it up but no power

    • @lanceloftus1193
      @lanceloftus1193 6 ปีที่แล้ว +1

      Darren Nunnery what was your issue same boat in my work car 08 cobalt

    • @iffyloatty
      @iffyloatty 6 ปีที่แล้ว +1

      Same issue in my 09 Cobalt

    • @lanceloftus1193
      @lanceloftus1193 6 ปีที่แล้ว +1

      LoattyTV make sure you have the exact interface you need there is 2 for the cobalts I had wrong one

    • @carnitas6493
      @carnitas6493 6 ปีที่แล้ว +3

      I have the same Pontiac too and since it’s a GM car you have to wire the red wire to the fuse box on the side of the passenger door and find a right fuse that turns the stereo on and off when you turn the car on and off so it doesn’t drain your battery

  • @IFIXUR360
    @IFIXUR360 6 ปีที่แล้ว +1

    so what did you do about the parking brake safety wire? did you not hook it up for your dvd player or did you ground it to the frame.

  • @tyfowler5883
    @tyfowler5883 2 ปีที่แล้ว

    What did he do with the antenna?

  • @ZambonieDude
    @ZambonieDude 7 ปีที่แล้ว

    Did you not install the Ground wire in this video?
    Also will i have to buy my own ground wire for the installation to be completed?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว +2

      ZambonieDude most stock car stereos have grounds already in wire harness. But if for some reason it does not have ground in harness yes you will have to install a ground wire. This can be done by finding the nearest solid piece of metal that produces a good ground and using a self tapping screw to secure wire. A test light can be used to check ground location by holding one end on 12 volt power and other end on metal if it lights up brightly you have a good ground.

  • @tjones2221
    @tjones2221 5 ปีที่แล้ว +10

    I for one am going back to stock Ford stereo system.

  • @ShawnKurtis
    @ShawnKurtis 7 ปีที่แล้ว

    Ive searched and searched for days trying to find a video about installing Dual Multimedia DVD Receiver w/ Bluetooth (xdvd256bt) into my 2014 Nissan Versa 4dr Sedan. (I undid the negative from the battery) I bought a antenna adapter and a harness. I went ahead and color coordinated the wires and used electrical tape.. I'm needing help figuring out where to mount the ground wire and I'm also wondering if I missed a step or something. Help would be much appreciated more than you think. Clearly I'm not much of a tech guy lol. 😥

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Shawn Kurtis ground wire hooks to either the wire labeled ground on car wire harness. if no ground on harness the ground wire should be attached to closet solid metal location on car with a self tapping screw and a wire ring terminal. usually inside the radio opening you can find solid metal that can be used for ground.

  • @samanthamead6905
    @samanthamead6905 7 ปีที่แล้ว +1

    okay so we have an 04 dodge durango and bought a Dual xbm280bt radio from Wal-Mart and my fiance cut the plug off the factory radio so how would we wire those cut wires to the new radio wires without the plug

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Samantha Mead do you still have the plug you cut off?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Samantha Mead if you still have cut plug you can buy an adapter wire harness and figure out which wire s are what by matching colors.

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Samantha Mead if plug is gone/missing you figure out your power and ground wires with test light. But your speaker wires will be much harder to figure out if you have access to speakers you might be able to find the color of wires hooked up to speaker and hopefully the color is the same where wires were cut.

  • @cheesehead6710
    @cheesehead6710 7 ปีที่แล้ว +11

    How'd you test it without reconnecting the battery. haha great video!

  • @antoniopais4720
    @antoniopais4720 6 ปีที่แล้ว

    Hello, can someone help me. Why does my radio find only one fm station? I made several attempts and I could not change that. XDVD276BT. Thank you.

  • @victormartinez151
    @victormartinez151 6 ปีที่แล้ว

    Question I have the same model car 2000 Nissan Xterra same brand of radio but the harness I got does not have a black ground wire but the radio does radio works fine till i turn on my head lights then the radio shuts off how do I fix this problem

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  6 ปีที่แล้ว +1

      victor martinez find a suitable ground on your vehicle to attach ground wire with self tapping screw to closest solid metal or you can tie in with the cigarette lighter ground.

  • @ramaishwarrai7262
    @ramaishwarrai7262 5 ปีที่แล้ว +1

    I have that similar dual radio it works fine how to set up back cam that it comes with?

  • @htboston
    @htboston 7 ปีที่แล้ว +1

    Do you have to remove just the black wire from the battery or both to do electrical work?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      htboston just one wire red/+ preferred

    • @nickoats5998
      @nickoats5998 5 ปีที่แล้ว

      C.L.S. Allinone why though ?

  • @jrea46
    @jrea46 7 ปีที่แล้ว +5

    all these vidieos are driving me crazy the after market radio has rt but my 2012 colorado dont have a red wire has all the other colors but red what do i do

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว +1

      Jaxs Rea you will need wire harness adapter for your vehicle it will show on instructions what wire is red/12 volt ignition. The wires that are attached to stock radio do not follow the same color codes that aftermarket radios do. You can also use a test light to figure out which wire is red/12 volt ignition. Test light will show power with wire when ignition is in the on position .

    • @jrea46
      @jrea46 7 ปีที่แล้ว

      THANKU U i dont know if i screwed up i cut maket connecto off before i started thought thats what u do wire to new one

    • @jrea46
      @jrea46 7 ปีที่แล้ว

      well guess what i wired it rt it worked i felt radio was hot as crap in back found out chevy uhave to wire red one to fuse boxdid that yeserday nothing im stressed out done . so much for trying

    • @kingkwongaming2272
      @kingkwongaming2272 7 ปีที่แล้ว

      Jaxs Real

  • @elitebeast719officialyoutu7
    @elitebeast719officialyoutu7 7 ปีที่แล้ว

    how did you install the universal antenna from the stock antenna to the deck I got the same one in your video but I can't figure it out in my 2006 Nissan Altima

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Randy Rodriquez one cable should plug into stock antenna wire other end should plug into deck. Only 2 ends should be used. If it does not plug into your antenna then it's not the proper adapter for your vehicle unfortunately.

    • @elitebeast719officialyoutu7
      @elitebeast719officialyoutu7 7 ปีที่แล้ว +1

      I got the one for 2006 Nissan Altima and nun of the ends fit do I really need the antenna? and what is the black and white wire for is that a positive ground?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Randy Rodriquez antenna is for FM and AM radio it's not required but you will lose those functions. For stereo their should be a diagram saying what each color of wire is and same with the car adapter wire harness to figure out the black/white wire.

  • @steerwheelholder6060
    @steerwheelholder6060 5 ปีที่แล้ว

    Its a nice radio but i hate that it takes forever to connect the bluetopth and then it takes even loner for the sound to go thru the speakers. Sucks kus i bought it for the bt

  • @jeremyremington8897
    @jeremyremington8897 3 ปีที่แล้ว

    Can you please help me... Doubt you have this stereo anymore but if any chance you can give me the order of colors on the pins.. dual doesn't give info.. ive zoomed in on multiple paused images and I just can't see for life of me ..

  • @dylanreynolds4899
    @dylanreynolds4899 10 หลายเดือนก่อน

    What if it's not a double to I have to cut the hole out?

  • @brandon6333
    @brandon6333 6 ปีที่แล้ว +8

    bought a boss audio stereo off amazon used from amazons warehouse deals part, and the stereo works completely.. gps and everything, only thing was no audio, i have no amp in my car and the "professional" i was paying told me after 5 hours that my unit is defective, he even showed me his stereo and it worked fine. should i believe him? (he was a guy off craigslist)

  • @Obion408
    @Obion408 5 ปีที่แล้ว

    what about aux cable

  • @PaulOgie
    @PaulOgie 4 ปีที่แล้ว

    HELP! MY RED WIRE IS NOT PART OF THE HARNESS. IT IS SEPARATE. WTF DO I HOOK THAT UP TO? All my wires will be used, but the red one that came with the stereo is on the harness and the one that came with the adapter kit is not. It looks like it wants me to tap into a 12V switched source...don't know where or how I should do this! HELP

  • @WatchaSayHuh
    @WatchaSayHuh 7 ปีที่แล้ว

    so I have the same stereo for my Nissan maxima and everything works except for sound. I read it is probably because I need to wire the amp wire but I'm where!?!?! help please.

  • @EDP-kz1sx
    @EDP-kz1sx 4 ปีที่แล้ว

    Does it work with iphone

  • @rakhan9527
    @rakhan9527 6 ปีที่แล้ว +1

    Hi, looking to replace the after market stereo that came with my car when I got it used. Do I still need a conversion kit, or should the wires be ready to plug right in? Thanks!

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  6 ปีที่แล้ว +2

      Wires should be ready if last installer did it right keep your fingers crossed.

    • @rakhan9527
      @rakhan9527 6 ปีที่แล้ว

      C.L.S. Allinone thanks, it worked fine!

  • @fishinghabit_tv4990
    @fishinghabit_tv4990 4 ปีที่แล้ว +4

    Where do I hook the ground wire

  • @HERNANDEZ7787
    @HERNANDEZ7787 7 ปีที่แล้ว +3

    I got the same stereo and everything work but no sound ,

    • @technobeastjordane6867
      @technobeastjordane6867 6 ปีที่แล้ว +1

      JUAN * EL CUBANITO * HERNANDEZ any solutions
      I have the xdvd276bt no sound

  • @nickoats5998
    @nickoats5998 5 ปีที่แล้ว

    I think I crossed wires I also failed to disconnect my battery during the radio install I replaced the radio fuse but I’m still not getting power to the head unit what do I do

  • @ricmelyair
    @ricmelyair 2 ปีที่แล้ว

    Help help help wher can i conect the reverse + cable please

  • @malachiy13
    @malachiy13 5 ปีที่แล้ว +2

    I'm left with the Blue/black wire (remote turn on) and the Orange (reverse) unit hardness wires, where do they go? .

    • @gfysent7281
      @gfysent7281 5 ปีที่แล้ว

      Malachi El Sigma same boat as u. My radio won’t event turn on

  • @wolverine7739
    @wolverine7739 6 ปีที่แล้ว

    What I do with the brake cable and the reverse cable

  • @robincornell5807
    @robincornell5807 4 ปีที่แล้ว

    cannot find a stereo connector for a 2000 Montana any help would be appreciated

  • @julianeaguilar2334
    @julianeaguilar2334 6 ปีที่แล้ว +2

    Hi, I have the exact stereo put in by a car stereo guy. My Stereo worked fine until a month ago when it started to turn off by itself while I was driving. Then a week ago it turned off and never came back on. Checked fuses they are ok , took radio out of the dash and all wires are fine. If anyone has any idea on what it could be I would love and appreciate some input. Thanks

    • @tonycervz89
      @tonycervz89 3 ปีที่แล้ว

      Probably burned out

  • @dontecoleman6012
    @dontecoleman6012 6 ปีที่แล้ว

    Does any one know how to go from double din to signal din fold out monitor I've never seen a video on it...

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  6 ปีที่แล้ว

      most of your stereo install kits have a single din mount included that fits into your double din opening.

  • @albertguevara3523
    @albertguevara3523 7 ปีที่แล้ว

    I bought this radio today I set it up but weird thing when I turn on my headlights the screen turns blue but when I shut off the lights it goes back to normal.. any suggestions need the help..

    • @BoricuaKelfa
      @BoricuaKelfa 7 ปีที่แล้ว

      albert guevara cool

    • @trinitykendrick8193
      @trinitykendrick8193 5 ปีที่แล้ว

      Please tell me you fixed this????? I am having the SAME problemmmmm

  • @colbywoodmedia
    @colbywoodmedia 6 ปีที่แล้ว

    Hello. I bought the same one and I installed it and it was working fine. Soon after the screen just turned blue and stayed blue. What is that?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  6 ปีที่แล้ว

      might be wire harness. You could try different brand. I have been hearing there is a lot of issues with GM vehicle wire harness es ...

    • @colbywoodmedia
      @colbywoodmedia 6 ปีที่แล้ว

      C.L.S. Allinone Thank you🙌🏻

    • @hannahhark8520
      @hannahhark8520 5 ปีที่แล้ว

      @@D.I.Y._All-in-One mine has done the same thing yesterday working fine I turned my car off and in the morning I turned on the car and it's a very lightish dark screen I've reset both the radio you have and unplugged everything plus took out and reset the access box and still same screen help please we have -degree weather right now so I've brought them in to warm up

  • @willbowman2425
    @willbowman2425 ปีที่แล้ว

    What if you have a parking brake wire

  • @davidl.martinez1522
    @davidl.martinez1522 7 ปีที่แล้ว

    I have a 2004 Chevrolet Silverado 2500 HD Duramax four wheel drive long wheel base with on Star. plus it has steering wheel control. I want to get that door multimedia DVD player Seaver with Bluetooth do you know what all I would need to buy to get it installed and how can I bypass that switch for the braking left it so I can watch DVD player all movies?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว +1

      I believe you will need to buy a new aftermarket dash panel because the opening is not big enough to fit double din stereo you will also need wire harness adapters and onstar adapters if you want to retain that feature. You should be able to find everything you need on ebay.com or schosche www.scosche.com/ . To bypass parking prake on dual stereo just hook parking brake wire to ground wires on wire harness.

    • @dannythegreat948
      @dannythegreat948 6 ปีที่แล้ว

      just ground the brake wire and it will work I have install this same radio in the past

  • @thechestrockfield
    @thechestrockfield 5 ปีที่แล้ว

    I have to buy a separate connector? Why is the one that came with the new stereo not enough?

    • @ETphonehomek
      @ETphonehomek 4 ปีที่แล้ว +1

      There’s no standardization, so you need an adapter that goes from your car’s specific stereo connector to spliceable wires. Without it, you can still make it work by cutting off the stock connector and splicing directly but you’ll have to figure out which wire is which on your own and it won’t be easy to go back to the stock radio.

  • @kasierouse3654
    @kasierouse3654 3 ปีที่แล้ว

    My harness for my car has two of a lot of colors solid and with stripe. And the harness for the head unit only has one of each color what do I do?

    • @otzfawt2698
      @otzfawt2698 2 ปีที่แล้ว

      A solid color wire is positive a wire with a stripe is negative

  • @kevinortiz7879
    @kevinortiz7879 4 ปีที่แล้ว +1

    Does somebody knows where can I get the cable that canes with the stereo? I bought one but it didn’t came with it

  • @rebeccahoffman5914
    @rebeccahoffman5914 6 ปีที่แล้ว

    Could you tell me if this stereo is compatible with a 1995 volvo.

  • @dallaswilkins5984
    @dallaswilkins5984 6 ปีที่แล้ว

    Stereo won't stay on unless all yellow and red wires are wired together but then it stays on even when the car is off how do I fix this

    • @MarcyMckeefer
      @MarcyMckeefer 3 ปีที่แล้ว

      Did you figure this out? I have the same problem!

  • @ashleacheshire7004
    @ashleacheshire7004 5 ปีที่แล้ว +1

    I got a 2003 Chevy trailblazer and I removed the 6 disc cd changer and had to put it back in and now it won't start. I've tried jumping it off and the lights will come on but it won't turn over. And the battery won't hold a charge. Wut should I do

    • @vampedkitty
      @vampedkitty 5 ปีที่แล้ว

      You may need a new battery or alternator

  • @laiDBackproduction
    @laiDBackproduction 7 ปีที่แล้ว

    What size fuse does it use

  • @JoseGutierrez-ty8lf
    @JoseGutierrez-ty8lf 7 ปีที่แล้ว +5

    Where can I connect my power cable to?

  • @dcap1585
    @dcap1585 5 ปีที่แล้ว +1

    How do you like that stereo?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  5 ปีที่แล้ว

      Its nit bad Still working

    • @rafaelnegron
      @rafaelnegron 4 ปีที่แล้ว

      @@D.I.Y._All-in-One Its not bad? So its not that good? Does it worth it?

  • @crossangels9772
    @crossangels9772 5 ปีที่แล้ว

    Would this fit a g35 coupe?

  • @angelramos4788
    @angelramos4788 7 ปีที่แล้ว

    I just bought this, but it's already been opened before and somebody took the mounting bracket. I already have a double din deck installed on my vehicle, are the brackets interchangeable or do I need the one specifically for this?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Daryl Ramos sometimes they are interchangeable you could slide it in and see if it locks in place.

  • @stephonreed7696
    @stephonreed7696 7 ปีที่แล้ว

    hey. I instead one of these in my 96 s10. every thing works till I cut the light on then it goes blue. What is the best way for me to handle it

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Stephon Reed sound like Something to due with dimmer wires try unhooking any wires labled dimmer then cap them off and test radio and see if lights still effect it. If that still does not work double check all connections its not too hard to mix a couple wires up.

  • @VladimirVillanes
    @VladimirVillanes 5 ปีที่แล้ว

    Anyone know what extra parts I would need to install it on a 2013 Nissan Sentra?

  • @juanvega5765
    @juanvega5765 7 ปีที่แล้ว

    Can you connect subs to this double din?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Juan Vega yes just hooked up sub actually to this deck a week ago.

    • @juanvega5765
      @juanvega5765 7 ปีที่แล้ว

      C.L.S. Allinone thanks and do you think you could be Able to do a full review

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Yes eventually I will release a subwoofer installation video but it will be for a different vehicle. But it will be a standard installation tutorial for all vehicles. The Dual deck in this video has subwoofer volume control with frequency adjustment to get bass sounding really good .

  • @jamesevans7828
    @jamesevans7828 7 ปีที่แล้ว +10

    I have everything hooked up but my radio is not turning on

    • @davidcorona6613
      @davidcorona6613 5 ปีที่แล้ว +2

      Same here

    • @ladajahabethel254
      @ladajahabethel254 5 ปีที่แล้ว +2

      Same did you ever get it to work

    • @collinhardin6898
      @collinhardin6898 5 ปีที่แล้ว

      Same

    • @collinhardin6898
      @collinhardin6898 5 ปีที่แล้ว

      I've hooked up 3 before and I'm never had a problem til now, I tested power with a voltmeter and it's getting power, idk what the problem could be

    • @smoque7156
      @smoque7156 5 ปีที่แล้ว

      michelle c the pink and both of the black wires you have to put them together on your black Negative wire

  • @matthewrivas7832
    @matthewrivas7832 6 ปีที่แล้ว

    My stereo connector has extra plug in thingys idk what to do

  • @ricardoolivares884
    @ricardoolivares884 4 ปีที่แล้ว

    I bought the same car stereo from autozone, and I’m planning to a 2008 Volkswagen Bora, my question is, do you know if there is a harness that I could use to install it on this type of car?

    • @maxizvuk8278
      @maxizvuk8278 3 ปีที่แล้ว +1

      Go to Best Buy they got literally almost every harness for every radio to everycar

  • @davidmorales9313
    @davidmorales9313 4 ปีที่แล้ว +1

    Hey can someone please tell my why when I turn on the lights of the car the stereo goes to a blue screen ? Like it goes to a blue screen and doesn’t let me do anything

  • @juanmendoza6244
    @juanmendoza6244 7 ปีที่แล้ว

    bought the same stereo, hooked it up and it says theres a "brake light" wire i have to hook up or else the stereo screen goes blue when i turn on my lights, what can i do?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Juan Mendoza hook brake light cable to ground wire on the same wire harness.

    • @juanmendoza6244
      @juanmendoza6244 7 ปีที่แล้ว

      C.L.S. Allinone ok so the stereo harness has the "brake light" wire, i hook that up to the ground on the stereo wire?

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Juan Mendoza yes . if it's grounded it will trick the stereo to think it's hooked up to brake.

    • @juanmendoza6244
      @juanmendoza6244 7 ปีที่แล้ว

      C.L.S. Allinone did that, didnt work

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Juan Mendoza worked for me I just connected the black wire and parking brake wire from stereo wire harness together then connected both to car ground wire. I heard a couple people having problems with dimmer wire also having to disconnect or screen would turn blue with vehicle lights on.

  • @juanmoreno5187
    @juanmoreno5187 6 ปีที่แล้ว

    Hey do you know why my radio is dying out my battery

    • @terrybreen3331
      @terrybreen3331 4 ปีที่แล้ว

      I had the same problem, radio was not turning off the amplifier, so I added a extra switch.

  • @angelpardo5108
    @angelpardo5108 7 ปีที่แล้ว

    Hello, I have a question. Where were you able to find the mounting cage and the stereo connection adapters for this product. I bought the same one and am having trouble finding those accessories.

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Mounting cage should come supplied with stereo when purchased. If you purchased stereo used the cage may be missing might be able to find one on ebay here is a link that might help: www.ebay.com/sch/i.html?_odkw=dual+moiunting+cage+double+din&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xdual+mounting+cage+double+din.TRS0&_nkw=dual+mounting+cage+double+din&_sacat=0 ... Stereo connection adapters can be found on Ebay or at Walmart, Best buy, Autozone, and Oreily's and most other auto part stores.

    • @angelpardo5108
      @angelpardo5108 7 ปีที่แล้ว

      C.L.S. Allinone Thanks a bunch

  • @albertguevara3523
    @albertguevara3523 7 ปีที่แล้ว

    ok I did that I know the dimmer is a orange wire and it still turning blue .. I checked all the wires and all are correct so now I'm stumped lol..

    • @D.I.Y._All-in-One
      @D.I.Y._All-in-One  7 ปีที่แล้ว

      Did you figure it out? If the reverse wire is hooked up wrong that could screen to go blue also. For instance if the orange reverse wire on stereo is hooked to your illumination wire on your car wire harness it could cause your screen to go blue when turning on lights. Also another way to find problem wire is hookup just your power and ground wires. Then test by turning on lights if it works hookup another wire then test again and keep repeating until you find the problem wire. Also The parking brake wire can be bypassed and hooked to a ground wires to watch dvd while driving but that can dangerous though lol.

  • @phillipmcclellan9671
    @phillipmcclellan9671 ปีที่แล้ว

    I install the radio correctly, but it cuts off and on with a sign says this

  • @roberthartmann782
    @roberthartmann782 4 ปีที่แล้ว

    What about the bypass of e brake so dvd to work. Dual dont have that e brake wire?? That some people have to buy pac. Or ground it??