Nice review Shane. I have the fish finder at the same place and ran the cables under the seat. Reverse the seat secure latches so they're easier to clip together, you'll have more room.
That boat is beautiful, and love the big water pdl. I have my 2022 Hoodoo impulse 120, I citrus orange. Fin drive, and run my J2 Bixpy, on the Vibe Gravity blade rudder, to fit my kayak, and cables, with the motor. Plenty of storage, stable. I love the ocean, but I'm a large mouth bass angler. But if you're in the ocean, even off shore on freshwater. Please spend the $19.99 on a bildge pump. I do have a real kayak sponge, in my emergency on the water dry bag kayak kit. But you'll be using that sponge forever, in an emergency. The difference between to he two is insane, after the test I did. 😎 🎣 🌊
You can buy stock aluminum t track online...cheap...cut to l length...cut ends at 45 degrees , round the corners with a file , drill two holes and mount over top of the existing slot tracks for a nice full length raised track....
Brother, your tattoo is a reason why I subscribed. Nick at Navarre Kayak Fishing covers these yaks fairly well. He shows how to fix the PDL if it breaks. Obviously if it's still under warranty, send it to O.T.. I like how you covered the BigWater from bow to stern. How do you like that Ram mount for your fishfinder? I was thinking about a Scotty mount, but now I'm not sure. Yak safe and tight lines!
Thank you brother! I love the ram mount because I can move it quickly without having to loosen anything. It’s awesome! Oh yeah Nick is the man. I reach out to him anytime I have an OT question haha
Just ordered the same kayak! It ships in may 🤙🏻 Thanks for the review! I was a little nervous because so many people say it’s less stable, I just don’t see how lol they must be inexperienced. Anyways man just subbed I fish the Texas gulf coast! 👊🏻
I had the same issue. Had to remove the tension knob and put the spacer from the bottom to the top of the knob. Have a video of it on my channel. Subbed.
On a non-pedal version, it doesn't look like I could transport this upside down on regular Yakima bars. I'd have to remove the seat and what other problems?
Thank you! Absolutely here you go. navarrekayakfishing.com/shop/kayak-handle-w-gear-track-mount/ Also, check out Nicks page Navarre kayak fishing. I’m sure you have seen him before. Such a great guy he made me a mount for my transducer and is now selling them as well. Quality products, great service. Thanks for the Sub!
Would you use this kayak for fly fishing? I live in SW Florida and fish bays, mangroves, rivers, close to the beach on the gulf. THANK YOU! Excellent information on your video!
Just got mine yesterday. Love the review!! Idea, would this work? Trak system, could you use a router and extend the groove of the track? Have not looked at mine that closely. Just thought of it while viewing. Thanks
Hey brother like your videos. I’ve got a couple questions for you. I just ordered the 132. What keel guard to you put on there and why cut it the way you did? Do you have a video of how you built that roller cart you have your yak sitting on? Thank again.
I used a sheet of kydex. Reason for that shape is so at the bend it’s easier to handle and doesn’t get all wrinkled. Also no video on the cart I just went off a bunch on TH-cam and just spaced the pvc 8” from center
@@YakLocal yes, cover the base with a thin layer of grease, sand/ruff up the inside of the kayak. Apply about a 1/4" of Bondo around the entire opening, and press and lock the drive. Let it set up an hour or so, and then release it and trim/sand any excess.
Hello great video. I’m new to fishing and wanted to ask what you recommend I really like the old town sportsman’s pdl 120 and now I seen yours is super nice. Do you knows what’s the difference between the two? I want to learn how to fish the ocean harbors and jetty.
I ordered the kydex on eBay it was like 3 sheets. Also I just drew the shape with pencil then cut it out and heat molded it to keel. It was actually really simple. The kydex is easy to work with once warmed up
@@OCOutdoorsman best way is to cut the kydex to shape then warm it all up with heat gun. Get it a little soft. Then put on keel. Use painters tape at tip and slowly heat it all the smooth out waves and it will harden perfect 👍🏻you can also reheat if needed
Imrider Lightweight Polyamide 9/16" Inch Bike Pedals for BMX Road MTB Bicycle www.amazon.com/dp/B01ILX7LPE/ref=cm_sw_r_cp_api_glt_fabc_P5J740KSYMN1BFHMDD1M?_encoding=UTF8&psc=1
@@YakLocal So they want a review of what has been done for years But because it has a different name it's a different kayak when there a 100% the same thing just literally different names So is your review Different from the predator PDL review because you say different name
@@Workhardsavemore the kayak is the same exact hull just new features and some subtle changes. Old Town changed the name to Bigwater. But this is the new year. New seat, new tracks, drive storage is different front hatch is different. People want to know these things.
@@YakLocal Different seat yes that's about it actually everything else has been done on the predator For 2019 The only difference actually is the seat Which doesn't have storage and is not as good But they call premium I know this because I bought the old predator with the round centre console And also the new one with the square centre console that doesn't leak The option was there for me to buy the sportsman big water 120 but the only difference was they have 2 Colors
@@Workhardsavemore I still don’t understand what your trying to prove. When a new product comes out, new seat, different colors etc people want to see it in real time. Some people might not.
![โอ้เธอช่าง... - บี้เดอะสกา ft. ต๋อง เทวัญ (Prod. by ป๋าเพชร) [Official MV]](http://i.ytimg.com/vi/zbWhiLFmVL0/mqdefault.jpg)
![30 ชั่วโมงคนเดียว บนรถไฟชั้น 3 โซเวียต [Around The World Ep. 2]](http://i.ytimg.com/vi/MlE9boAVqDA/mqdefault.jpg)
Nice review Shane. I have the fish finder at the same place and ran the cables under the seat. Reverse the seat secure latches so they're easier to clip together, you'll have more room.
I just noticed about the latches haha makes way more sense!! Thanks a bunch! I’m going to swap them now! I appreciate the view! Tight lines
That boat is beautiful, and love the big water pdl. I have my 2022 Hoodoo impulse 120, I citrus orange. Fin drive, and run my J2 Bixpy, on the Vibe Gravity blade rudder, to fit my kayak, and cables, with the motor. Plenty of storage, stable. I love the ocean, but I'm a large mouth bass angler. But if you're in the ocean, even off shore on freshwater. Please spend the $19.99 on a bildge pump. I do have a real kayak sponge, in my emergency on the water dry bag kayak kit. But you'll be using that sponge forever, in an emergency. The difference between to he two is insane, after the test I did. 😎 🎣 🌊
Have the exact same kayak. Love it. Although I am having the same issue you had with the drive not locking securely enough to stop it from swaying.
Did you tighten the nut like I explained in the video? Give it a shot and let me know. It doesn’t have to be super tight
You can buy stock aluminum t track online...cheap...cut to l length...cut ends at 45 degrees , round the corners with a file , drill two holes and mount over top of the existing slot tracks for a nice full length raised track....
I am looking at this yak.. thanks for the awesome info!!!
You will love it! I’m extremely happy with it
Nuh-var 👍🏻. Great video.
The plates up front are a very overlooked, but huge benefit on the BW compared to the Topwater 120.
Brother, your tattoo is a reason why I subscribed.
Nick at Navarre Kayak Fishing covers these yaks fairly well. He shows how to fix the PDL if it breaks. Obviously if it's still under warranty, send it to O.T..
I like how you covered the BigWater from bow to stern. How do you like that Ram mount for your fishfinder? I was thinking about a Scotty mount, but now I'm not sure.
Yak safe and tight lines!
Thank you brother! I love the ram mount because I can move it quickly without having to loosen anything. It’s awesome! Oh yeah Nick is the man. I reach out to him anytime I have an OT question haha
Terrific video, Shane.
Thank you man!
Just ordered the same kayak! It ships in may 🤙🏻 Thanks for the review! I was a little nervous because so many people say it’s less stable, I just don’t see how lol they must be inexperienced. Anyways man just subbed I fish the Texas gulf coast! 👊🏻
Your going to love it!! Let me know how you like it when you try it out!
@@bduals207 nice!
Got mine through eco fishing order tooo
@@chunkyboy9624 nice! I’m pumped 🤙🏻
Same
Looking good brother.. hope to see you in april 🤙🏽
Oh I’ll be there bro no doubt!
I had the same issue. Had to remove the tension knob and put the spacer from the bottom to the top of the knob. Have a video of it on my channel. Subbed.
On a non-pedal version, it doesn't look like I could transport this upside down on regular Yakima bars. I'd have to remove the seat and what other problems?
What's the name of the mount you use on your carry handles? And can you add a link to purchase? LOVE your set-up?
Thank you! Absolutely here you go. navarrekayakfishing.com/shop/kayak-handle-w-gear-track-mount/
Also, check out Nicks page Navarre kayak fishing. I’m sure you have seen him before. Such a great guy he made me a mount for my transducer and is now selling them as well. Quality products, great service. Thanks for the Sub!
Would you use this kayak for fly fishing? I live in SW Florida and fish bays, mangroves, rivers, close to the beach on the gulf. THANK YOU! Excellent information on your video!
Thanks for the review, where did you get the keel guards?
Made it myself. Using kydex and just cut and heat mold and double sided tape and waterproof caulk
@@YakLocal awesome thanks!!!
Just got mine yesterday. Love the review!! Idea, would this work? Trak system, could you use a router and extend the groove of the track? Have not looked at mine that closely. Just thought of it while viewing. Thanks
It’s an awesome kayak! It’s possible for sure, I might just attach a track on it haha! Thanks for the sub!
Where can I purchase those orange spacers that keep the drive perfectly centered?
Thank you for the great review!!
Navarre kayak fishing! Thank for watching!
@@YakLocal Thank you Man. Appreciate the help. 🤘🏼
Such a nice yak! Can’t wait to get on mine. I also say #therewego in every video of mine when I catch a fish LOL HABIT
Haha your gunna love it! Oh yeah big time haha I hear it all the time on the water lol
Hey brother like your videos. I’ve got a couple questions for you. I just ordered the 132. What keel guard to you put on there and why cut it the way you did? Do you have a video of how you built that roller cart you have your yak sitting on? Thank again.
I used a sheet of kydex. Reason for that shape is so at the bend it’s easier to handle and doesn’t get all wrinkled. Also no video on the cart I just went off a bunch on TH-cam and just spaced the pvc 8” from center
@@YakLocal good looking brother. Keep catchin! Tight lines!
@@chunkyboy9624 anytime Chris! Go get em!
th-cam.com/video/kjQp30gtSPw/w-d-xo.html
Hers the link the the cart build I went off of!
Good looking brother. Hahaha, did I just drop this stimmy on this yak and everything needed for it or no? Lol
These PDL pedal drives work a lot better and smoother if you "glass" them. As in glassing a rifle. It's easy to do and makes a world of difference.
Have you done it ? I’m curious to know more
@@YakLocal yes, cover the base with a thin layer of grease, sand/ruff up the inside of the kayak. Apply about a 1/4" of Bondo around the entire opening, and press and lock the drive. Let it set up an hour or so, and then release it and trim/sand any excess.
Hello great video. I’m new to fishing and wanted to ask what you recommend I really like the old town sportsman’s pdl 120 and now I seen yours is super nice. Do you knows what’s the difference between the two? I want to learn how to fish the ocean harbors and jetty.
If your going to fish Ocean, harbors and jetty’s than definitely the Bigwater 132. Cuts through swell and waves great and is much faster than 120
I like what you did with the front keel guard! Where'd you get the kydex and how did you shape it to fit your keel?
I ordered the kydex on eBay it was like 3 sheets. Also I just drew the shape with pencil then cut it out and heat molded it to keel. It was actually really simple. The kydex is easy to work with once warmed up
@@YakLocal Great idea! What did you use to mold the kydex to the keel?
@@OCOutdoorsman best way is to cut the kydex to shape then warm it all up with heat gun. Get it a little soft. Then put on keel. Use painters tape at tip and slowly heat it all the smooth out waves and it will harden perfect 👍🏻you can also reheat if needed
@@YakLocal Nice! I just placed an order for some Kydex. So what kind of glue did you use to attach it to your keel?
@@OCOutdoorsman I used 3m automotive double side tape on inside and then I used black dynaflex sealant on edge to seal it all in.
What thickness Kydex was used for the keel guard?
0.060”
Great review... question, did you buy it there locally, or order,. And how long did it take to get?
I ordered it through a dealer locally, luckily they had a truck coming from Old town a month later so I didn’t wait much
Where did you get the keel protector?
Made it myself out of 1/8” kydex
Where can I find those pedals the foam has come off my stocks?
Amazon, any mountain bike pedals will work
What length is the paddle?
Where did you get the aftermarket pedals?
Amazon mountain bike pedals
@@YakLocal thank you!
Also what keel guard did you use!
Thanks!!
@@glennsowacke9752 kydex Formed and cut to fit
Where did you get the extra props?
I called customer service and bought one. Cheap and fast
Nice video. Where did you source your replacement props from? I'm seeing them for $25-40/ea?
Direct from Old Town. I just called them
@@YakLocal Oh wow, thanks!
Lol!!i can relate to the too much crap for sure.
So much hahah
Nice video, where do you fish out of. I'm in the central coast SB to MDO
I’m from Long Beach, I’ll be out there the middle of April fishing Leffingwell landing. I do want to hit up SB this year
@@YakLocal better make it at least once 👍🏽🤙🏽
@@PANCHOSCOASTALKAYAKFISHING it’s happening bro!
Snazzy hat !
Haha thanks! That’s my go to tackle shop. Love there new logo design
were did you get your yak , i am having a hard time down here in yuma. pls help
dwain
OEX San Diego. Have you check Ecofishingonline.com?
Ecofishingshop.com sorry
Where did you get your pedals?
Amazon just type on kayak pedals and majority that pop up that are mountain bike pedals will work
Imrider Lightweight Polyamide 9/16" Inch Bike Pedals for BMX Road MTB Bicycle www.amazon.com/dp/B01ILX7LPE/ref=cm_sw_r_cp_api_glt_fabc_P5J740KSYMN1BFHMDD1M?_encoding=UTF8&psc=1
Siik yak bro!!
Seriously tho, nice video Shane! Great review 👍
Siiikkk broooo hahahaha thanks man!
Pretty much the predator PDL here this is Been reviewed For quite a few years now it's the same kayak just a different name
Yeah I know but some people want a review of the Bigwater Pdl. Thanks
@@YakLocal So they want a review of what has been done for years But because it has a different name it's a different kayak when there a 100% the same thing just literally different names So is your review Different from the predator PDL review because you say different name
@@Workhardsavemore the kayak is the same exact hull just new features and some subtle changes. Old Town changed the name to Bigwater. But this is the new year. New seat, new tracks, drive storage is different front hatch is different. People want to know these things.
@@YakLocal Different seat yes that's about it actually everything else has been done on the predator For 2019 The only difference actually is the seat Which doesn't have storage and is not as good But they call premium I know this because I bought the old predator with the round centre console And also the new one with the square centre console that doesn't leak The option was there for me to buy the sportsman big water 120 but the only difference was they have 2 Colors
@@Workhardsavemore I still don’t understand what your trying to prove. When a new product comes out, new seat, different colors etc people want to see it in real time. Some people might not.
Where did you get the keel guard ?
I made it myself, I used thin 1/8 inch hdpe and heated and molded and glued to hull