I use to think FP Black was aight with stock manifold... up until the fuckin turbo inlet warped the bolts that screw into the head to hold the TGVs down lmao +1 on the AMS for big stock location. RAs looking 🤌🔥
Hey BB, the Mrs. looked like she was not amused to find her RA on jack stands as she arrived home. I have received the same look from my wife when I did something to her car. I'm glad you have an understanding wife who supports your passion. Keep up the good work.
It always amazes me how Bader can make something so complicated like pulling am engine and almost rebuilding it in a day look so easy lmao I'm basically wanting to do the same setup but we broke out here
I found the literal best window wiper blades i ever used or seen used, cant remember the name but i got em at O'Rileys they were like 40 bucks per blade but they come with a 3 year warranty. Ive had them on for just over 4 years. Before i had them i was buying new blades like every 4 to 6 months.
Man, fuck these videos! Nah, seriously, these are my favorite videos of all time on TH-cam. I’m just salty because it’s only a matter of time before my bank account is on fire…thanks to this guy! Appreciate you man, more than you know!
Hhoo yea that RA going to beat Devin grey jajjaaa, can't wait to see that. Heyyy Josh I need that hard inlet pipe for my FP zero, how much for one? That will work on a 13 wrx with AMS??
@@DJ_Driven I use divinci pro… if my footage is decent I go into stabilization- Perspective (similar to the Warp Stabilizer in Adobe Premiere Pro) Similarity (applies pan, tilt, zoom, and rotation analysis) Translation (applies pan and tilt analysis only; usable for the X and Y axis to stabilize footage) Hope that helps it makes the footage ultra smooth 😎
Hey man , quick question for you or anyone who knows , do you use a radium fuel hanger for the high horse power builds ? I’m only shooting for 550 but my builder recommended it , just wanna get someone’s opinion..
The ID for the secondary flang is 2.25 according to ets. Cant find an up pipe that matches ANYWHERE. Most up pipes are 1.75-2 inch so wouldn't it bottle neck????
Wow, this will be an BBRRA STI 🤣🤣! Sorry could not resist.Curious with an equal length header for maximum power would you also do cylinder four cooling mod and a Fluidampr as well to increase EJ reliability and longevity?
Just curious you mentioned getting that dip at idle sorted out? What caused that and what did you do to correct it? In case I ever encounter that issue cuts down on the time chasing gremlins. Appreciate the vids man.
i standy by what he says about running stock manifold with it i did it for awhile and it comes off the turbo starts to put a hole in it from hitting the tgv its a nightmare
Need help got my15 wrx sti on cobb accesport stage1+ ots tune. Recently replace with mishi rads cobb cai and still when i ran the car with bit boost coolant rises up on my reservoir what could be wrong
I was wondering why that ACT died so quickly on you, didn't realize you didn't resurface the flywheel and also that the clutch was used. I am planning on going with this clutch for 500-600whp street car and some drag racing. Was just concerned it was junk.
Curious about your BBR 500 "package" and ect. I should inquire through website I assume? I have a ton of questions pertaining to the whole build of an STI by you. Just curious
@_baderbuilt I’ve got GSC Stage 2 cams and a gen2 gt3576r JR tuned @36psi. With that setup is it worth it in your opinion to purchase the AMS manifold?
@@evanchi9460 I figured but wanted to some opinions, It was odd to me that previous owner built the valve train but has the plastic manifold and only revving it to 6800. With the 3576r and cams the power band is like 5200-6800 lol
"OUTTA my way NERD" best line of the video
😂😂😂
I use to think FP Black was aight with stock manifold... up until the fuckin turbo inlet warped the bolts that screw into the head to hold the TGVs down lmao
+1 on the AMS for big stock location.
RAs looking 🤌🔥
SMEEDIA🤘🏼
how about NA 2.5 mani? Should fit good as well and radium have goodies for installing rails on em
Her face! Priceless! she is adorable! You two, perfection! Thanks for sharing!
Totally Agree! Someone needs to keep you in check!! LOL =)
Hey BB, the Mrs. looked like she was not amused to find her RA on jack stands as she arrived home. I have received the same look from my wife when I did something to her car.
I'm glad you have an understanding wife who supports your passion. Keep up the good work.
I love the daily uploads. Now team Bader knows how team Devin Niemela feels lol
Thats the setup i sold billy!!! Im glad your putting it to use!!
LETS GOOO!!! Had to get my boy some artwork for the freshly painted walls🤙🏻
🤙
I’m envious of how easy you make it look
It always amazes me how Bader can make something so complicated like pulling am engine and almost rebuilding it in a day look so easy lmao I'm basically wanting to do the same setup but we broke out here
Dude. You have great neighbors. You basically took the whole block parking spot ma guy🤣.
Whohooo another bader episode
“we got all the other gears ” 🤣🤣🤣🤣
Hell yeah I like how the intro went! Hella 🔥🔥🔥🔥
"Or else she'll salvage title this thing" lol! Josh you have a great sense of humor
😆😆😆
“What are you trynna do with it?”
“Trynna go 9s” spoken like a true racer lol.
That Type RA didn't last long stock, all in the name of racing, love it! 😂
I love this guy no 3rd gear but still sends it
Damn you got Subarus outside like I have Hondas lol super envious! Keep up the great content!
Thank you sir!
Fuck yea man that exact set up I was hoping you would do. Can’t wait to see what a well built stock engine fp green car will do 1/4 mile🥳🥳🥳🥳
Man Johnny Trans did you right bro. It looks amazing. Oh yeahhhh. I'm still waiting on my favorite T-shirt. A great video brother. Stay safe .
I found the literal best window wiper blades i ever used or seen used, cant remember the name but i got em at O'Rileys they were like 40 bucks per blade but they come with a 3 year warranty. Ive had them on for just over 4 years. Before i had them i was buying new blades like every 4 to 6 months.
I totally give you respect on this projects you show us. I missed out on the RA like you but maybe some day.
Keep please these daily uploads love the everyday Subaru content helps me keep my goals for my 2020 STi
For My 2018 Subaru wrx that will be a dream come true
Hhahahaah I knew you wouldn’t have that thing stock much longer than a week! Excited af on the numbers and overall longevity!
We gonna send it for the boys! 😆
More than a pre 18 RA/19 up motor will. A few 500-600 whp stock blocks around with miles on them. ;).
Sheeesh can’t wait to see that thing ripppp 😁 the wife is a saint for not chewing you out 🐐🤣
I guess there might have been an argument later, keep doing what you do best 😃
I have this same AMS and FP green set up. Do you have these hard inlets for sale?
Man, fuck these videos! Nah, seriously, these are my favorite videos of all time on TH-cam. I’m just salty because it’s only a matter of time before my bank account is on fire…thanks to this guy! Appreciate you man, more than you know!
My guy with the sauce ALL WEEK!!!
Hhoo yea that RA going to beat Devin grey jajjaaa, can't wait to see that. Heyyy Josh I need that hard inlet pipe for my FP zero, how much for one? That will work on a 13 wrx with AMS??
Every time I rewatch these videos I want to spend money on my '19 STI.
Woah, I've been behind on your vids..never seen an RA YET!!??!? 🤘🤘
When my motor goes I’ll either be trailering my car to you from utah or I’ll be picking up a motor from you and making the trek 😂😂😂
Nice man… throw some warp stabilizer on those slow shots and it will look like butter. Just make sure your pre footage is mostly shake free haha.
What make/model warp stabilizer are you recommending? He's either using an iPhone or a GoPro for those slow mo's.
@@DJ_Driven I use divinci pro… if my footage is decent I go into stabilization-
Perspective (similar to the Warp Stabilizer in Adobe Premiere Pro)
Similarity (applies pan, tilt, zoom, and rotation analysis)
Translation (applies pan and tilt analysis only; usable for the X and Y axis to stabilize footage)
Hope that helps it makes the footage ultra smooth 😎
I love how you guys pull motors in like 3 hours but dealers be like labor rate 1 week!! 5k pay or leave!! Lol 🔥🔥
I think sti’s like him
my favorite channel...def buying some merch
Type RA will be ready to play baby. Yeahhhh. 😂
Gorgeous set up
Turn it all the way upppppp.yeahhhh. BBR yeahhhh.
I cant wait to see the RA run on dyno make slap some horses
Please tell me where you get the Type RA license plate delete with the xxx/500? I've been looking forever and can't find it.
Hey man , quick question for you or anyone who knows , do you use a radium fuel hanger for the high horse power builds ? I’m only shooting for 550 but my builder recommended it , just wanna get someone’s opinion..
track day - any chance to see a BBR car on the road course
Please sell the hard inlet for ams manifold! Would be a game changer
Looking into the jig currently
@@BaderBuiltRacing yeah I second this because I know ETS original piping won’t fit it.
The ID for the secondary flang is 2.25 according to ets. Cant find an up pipe that matches ANYWHERE. Most up pipes are 1.75-2 inch so wouldn't it bottle neck????
Is there better clearance with a 2.5i manifold over a stock STI manifold?
Wow, this will be an BBRRA STI 🤣🤣! Sorry could not resist.Curious with an equal length header for maximum power would you also do cylinder four cooling mod and a Fluidampr as well to increase EJ reliability and longevity?
Just curious you mentioned getting that dip at idle sorted out? What caused that and what did you do to correct it? In case I ever encounter that issue cuts down on the time chasing gremlins. Appreciate the vids man.
Does the 10cm hot side make a big difference vs 8cm with the greens?
i standy by what he says about running stock manifold with it i did it for awhile and it comes off the turbo starts to put a hole in it from hitting the tgv its a nightmare
You dont need maf sensor when u go speed density? I see people still run aftermarket maf sensors
Need help got my15 wrx sti on cobb accesport stage1+ ots tune. Recently replace with mishi rads cobb cai and still when i ran the car with bit boost coolant rises up on my reservoir what could be wrong
I Want A Bader Build So Freaking Bad
Love it but no tail lights lol
I was wondering why that ACT died so quickly on you, didn't realize you didn't resurface the flywheel and also that the clutch was used. I am planning on going with this clutch for 500-600whp street car and some drag racing. Was just concerned it was junk.
Rofl my stock clutch lasted longer than any aftermarket clutch
you mentioned you felt it in the clutch that it was going out, what exactly do you look for when feeling for wear?
Stupid question?? what was the tortque solution delete plate on back of engine????
Thinking air pump
so the dip at idle when on e85 is a bad thing? ive had that since last year when i got my tune done.
Curious about your BBR 500 "package" and ect. I should inquire through website I assume? I have a ton of questions pertaining to the whole build of an STI by you. Just curious
Where did you get the front plate of type RA 344/500 ?
Would you ever build an older subie with an ej?
Hey do you think an AMS manifold is the right match for a dual avcs EJ207? 9000rpm red line and FP green but I don't want to kill the bottom end.
It's a car not a street bike Maybe if it was an RX-7 lol
How close to stock throttle body height is the throttle body height on the AMS?
Stock ayee ;) Lovin the vids! You needs more fozzies
Is the intake manifold worth it for more gains or not really???
why not circuit track with the RA ??
I have an fp black 3 inch, what kinda pipe I need again link?
Anyway you can do e tuning ?
Thoughts on the tomei equal lengths ?
please sell the ranch built inlet i need it
Hi im a new subscriber, and I was wondering if you are a builder? Is this the reason you have so many STI's parked along your street?
Yes sir, we are currently in process of getting a shop 😁
Does anyone know the song used around 16 minutes?
Hell yeah, let's go
wise words...'if you drive it like a race car, you're going to have race car problems'
@_baderbuilt I’ve got GSC Stage 2 cams and a gen2 gt3576r JR tuned @36psi. With that setup is it worth it in your opinion to purchase the AMS manifold?
Everything is build btw bottom and top end with ported heads
Yes.
@@evanchi9460 I figured but wanted to some opinions, It was odd to me that previous owner built the valve train but has the plastic manifold and only revving it to 6800. With the 3576r and cams the power band is like 5200-6800 lol
What you think on wrapping the header will it hurt it ?
Josh has said no go on wrap in previous videos. The wrap can cause the header to crack. If you go on killer B's website they say the same thing.
Why not just drive the RA around? (At the beginning of the video)
2019’s and up have the same motor as the RA?
yepp
BB what's the difference between the RA block and 2020 sti. Can they handle same power?
Same
now all you need is an s209
Do you sell these packages?
Only Bader rips a Type RA apart lol.
How much would it cost for all this to be done
This same setup if starting with a stock sti will be around 23k installed / parts / tuned
ETS Slip Joint header, does it get any better? Nope! =)
Dat ams manifold mmmm
Dude, again..? Everyday?? Something to listen to while i clean this boiler room out
Did someone say downpipe? Yes please
Hell yeah
Did he just expose the RA engine lol
If you could limit the amount of times you say bois, that'd be great. Once you start hearing it, you can't unhear it.
3rd gear works better then those wipers lol.
Early!!
you didn't get yelled at because she likes to party just as much as you 🤣
Party 🎉
Damn i had 105k on my 2015 factory clutch and it looked way better than this one lol
I hate that secondary air injection garbage. Good riddance.