How To Make Mini CNC Laser Engraver using DVD drive at home
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2020
- Learn How to make DIY CNC Laser Engraver by using old DVD Writers and very simple materials.
Parts for Mini Laser Engraver
- Arduino Nano/UNO (with USB cable)
- 2x DVD drive stepper mechanism
- 2x A4988 stepper motor driver modules (or GRBL shield)
- 250mW Laser with adjustable lens (or above)
- 12v 2Amps power supply minimum
- Male and Female Headers
- 8x small neodymium magnets ( which I have salvaged from DVD lens mechanism)
- 1x 2pin plug-in screw terminal block connector
- Zip ties (100mm)
- Super Glue
- 6x M3x12 screws
- 8x M2x5 screws
- Laser Safety Glasses
STL Files
thingiverse.com/thing:3521286
by maggie_shah
Wiring Diagrams
drive.google.com/drive/folder...
please don't forget to adjust the output current limit of the stepper drivers, to avoid the high temperature of stepper motors
Softwares
- GRBL Laser
Arduino Firmware
- GRBL
"LASER SAFETY GLASSES are a must in this project".
#CNC_Laser
#MiniCNC - วิทยาศาสตร์และเทคโนโลยี
Nice, I'm going to print this except for the laser holder. Thanks!
great project and a nice video editing
U R THE BEST 🤗♥️♥️♥️🥰
Wow, the video editing is amazing, I really enjoyed every single minute
nice project. you also could use a transistor or mosfet instead of the relay, it gives you the option to dim the brightness of your laser so you can make different gradients..
i will be taking this approach for mine :D thanks!
Very nice idea, It will be more advanced and great
Hey. Do we need the heat sink for that laser? Will it be enough for engraving on metal sheet?
This looks wonderful, thank you for the high quality guide!
Thank you very much, do you have any suggestions for the next video?
@@Kady3DPrinting I’m not sure, perhaps a simple PWM circuit, not with a 555? But whatever you want to make, you have excellent taste!
@@Kady3DPrinting can you sand code for arduino?
A laser of that power can cause instant damage your eyes, even looking at the spot that is burning can cause retinal damage. Reflections off a bright surface still have enough power to cause permanent eye damage.
Code de bhaii
Why do you use 250mW laswer, i see they use 500mW . What’s the difference between these, and the 250mW is enough for engraving wood?
Also, you don’t use the heatsink for the laser? Is it necessary? Thanks in advance
@@tamaica7770 i hope to get one, it's not available at my country
stl файлы
Great!!! Thank you very much!!!!
keep going bro 😊
Awesome man!
Thank you, any video you need we can make it for you
Nice video! One question, in which pin of the shield do you connect the short red cable from the relay? The one that goes to the 5v input of the relay. Is not clear in the video, but it seems that you connect it to the 3.3v of the shield, is that correct?
Yes, 3.3v will be fine for the rely, there are another wring method, using a power regulator and mosft, i can send it to you if you want
Kady DIY Projects yes. That would be great thanks. I am building one laser engraver taking advantage of my old 3D printer frame and using the same laser you use, a UNO and a CNC Shield. I think that the upside of using a 3D printer are the larger bed and the mechanical capacity for high speeds when moving.
@@sebastiansombra here is the link www.instructables.com/DIY-Mini-CNC-Laser-Engraver/
Kady DIY Projects thank you!
Great job.
hi! great video! i have one qustion for yuou, since i don't have old DVD readers i'm going to buy the motors and shafts on internet, can you please say me the diameter and the lenght of rails?
good job bro
Thanks for sharing
Thanks for the video! One question: what voltage should I set on stepper drivers?
I use 9 V
@@Kady3DPrinting you mean the voltage adjusted with the screw on stepper driver ?
If you mean the voltage i use 9 V 2 A power supply, if you mean the current, make the motor work for 60 second and touch it, if hot, move g
The screw to reduce the current
is it possible to upgrade the laser engraver become cnc drilling or cutting for acrylic ?
This is very tiny machine, it can't handle such hard tasks
Nice work! Can I use laser of only 100mw 650nm?
Yes sure, but you have make the movement slower
Do you need to add the jumpers on the shield?
Project so nice and simple that it's a shame not to do it.
How long are the standoffs you used (I have to purchase them separately because I don't have DVD Writers)
I have builded a machine like yours but the laser doesnt burn a lot despite i have regulated it to the minimun point with the lens. Only burns a little, but not like in your video. Im using a 12v 2a. How can I get the laser burns more?? Its a 250 mw laser too. Thanks.
Use power regulator to feed the laser 5v and the 250mw from the 12 volts
Very nice video .. If I do the wiring like the video with ralay will it work or will it have a problem ??
It will work prefect but without PWM support
hola amigo los objetos que imprimistes en 3d cuales son sus mediciones xfavor gracias espero tu respuesta que necesito hacerlo
Hey, very great project, but I have small problem. Can you help me with this project? I use 250mW laser, but laser dot just slightly, and when I run engravingit not burning just slightly light red color. How can I fix it? There is the problem?
Make sure that the distance between the laser and the bed is relevant
Hey! I am going to make this, but I have a problem. I took apart four different dvd drives, and they had only 1 stepper mechanism each. Will it be alright if I use steppers from different drives?
Yes, as long as they are all the right length. Also, where did you get all of your DVD drives? I need another one.
I build everything as per diagram The only difference is relay is using 3 V but gbrl Every time the relay is Activated comes up with an error any advice?
Great idea, couldn’t find wiring diagram at the comment
I have updated the description
@@Kady3DPrinting Hello. I cannot see the wiring wih the arduino UNO. Could you tell us where is it? Thanks!!
Can i use benbox with this prototype . If yes then how can i install and use the benbox software, please tell.
Wow! I really liked. I also wanted to recreate the model at home but on the video you did not give details about the dimensions of the different parts of the model. Is you sure you can help me with the dimensions?
Check the STL files
@@Kady3DPrinting Yes i already try there, but it does not take out the measurements of each room. To draw i will need measures
Really nice, but I have a question. What are the magnets for?
I have forgotten to explain, it used to stick the paper or the MDF on the bed using another 4 magnets
@@Kady3DPrinting Thanks man! That's a really cool little project. I look forward to trying it out myself!
Hello ! what is the version of GRBL ! Is it modified ??
I made it with Arduino nano but the step motor gets very hot and starting to burn.
I tried to align the motion but same issue...
You could try adjusting the current that goes to the motors. There is a potentiometer in each stepper driver.
You are extremely right, adjust it, move it slowly and try.
🤩 wow
Does anyone knows if the 12V 2A power supply is connected to the arduino or to the shield?
Connected to the shield
Hi! im building with your instructions and my laser is not getting warm? it shoots a red light and is following the borders of the thing i want to engrave, but the laser doesnt engrave! Could you help me?
That's mean the voltage is not enough, there is another wring method .. read this www.instructables.com/DIY-Mini-CNC-Laser-Engraver/
Does it matter that the spindle of the motors are different? i have 2 DVD but they are diferent, i need help!! please
No, i used different motors too
i have connected my lazer the way you showed. Even tho the lazer turns on it doesnt carve. What am i doing wrong?
Adjust the space between the laser point and the material
Do You need to install The jumpers under the A4988 stepper motor Driver?
Yes, sure
@@Kady3DPrinting have you then used 3 jumps in MS1, MS2 and MS3 pins using the "Sixteenth Step" resolution?
In order not to heat the engines, have you set the voltage on top of the potentiometer equal to 0.6 V?
Many thanks
Hello! I am having problems with the wiring, any maybe with software too. I found the two coils of the motors, but how to connect them well? How do I decide, which goes where? Also, I have the bigger problem: I can't set the borders of the machine. It wants to go out of the world, all away and it overheats because it always wants to move. How to set up software properly?
This videos contain less details. Missing some important data.
Any chance to build laser with bigger plate? Needs something to engrave skin.
There are many designs on thingversa bigger than that and they use the same logic
Bro I want this machine....can you sell?
Hi maybe someone can help me pls... my relay switches incorrectly...
when the laser should be on it is off, the red lamp on the relay is on and when it should be off both lamps on the relay are on and the laser is on... hope for help!
I have a question
Can I use an old ender 3 mainboard instead of Arduino with CNC shield?
Any board can move steppers will work
@@Kady3DPrinting thanks, I probably will try
el láser no va con algún regulador de voltaje
Se usar um nema 17 muda a configuração?
How much time it will take to complete one small scetch?
Maybe 15 minutes
What are settings for grbl?
And what is this track called?It is important for me to know your information about this track, please!
Is there using limit switch for home coordinate?
No need, home it by hand
Can it work at fiber and plastic for marking or printing
It may work on slow speed, search for a more powerful laser pen
Sorry i‘am a Bit of noot in Electronics. I don‘t understand the wiring Card. What‘s the big thing in the middle of your wiring Plan? I dont understand how to connect… :(
Hello, i made everything work but when i connect the laser it stops running while making something. The laser also hardly engraves and when i want to make something that’s complicated it also stops running. Can someone help me ? I dont know what to do
I want to buy this machine.
How many price in this machin.
Wiring diagram shows that laser is powered from 5v line, is this correct ?
Yes
Also there is an advanced wiring using MOSFT and a power regulator
Hy!
I used the same materials but my laser does not burn.
Do you have any idea what the problem would be?
The distance between the laser and the material is not correct or the power current is not enough
@@Kady3DPrinting I use 12V 2Amp. I kept trying to increase or decrease the distance but nothing...
What i mean is the lasser current, Arduino current is low, there's another wiring method using mosft
@@Kady3DPrinting what is the (mosft)
Can I ask will it be fine if you don’t use the heat sink for laser?
Which one exactly? Do you mean the metal container?
@@Kady3DPrinting the laser itself comes with the heatsink (maybe the metal container as you prefer).
@@tamaica7770 i think its mandatory, because it gets hot
@@Kady3DPrinting lol so why not use in your video. I was almost use it without heatsink
@@tamaica7770 i think there is a misunderstanding, i used the laser pen, the pen itself is a metal
Without cooling heatsink, how long these laser can survive ?
I didn’t test it for long time, i got another professional machine, check my latest videos
Price for Diary printing?
works on arduino mega??
Any Arduino will work
Why does my laser not opening? TYIA
if i use a new type cd player motor from a pc will it still work?
Maybe, the motor has 2 or 4 wrires?
4 and also the voltage is dif i think
@@Kady3DPrinting found it on amazon www.amazon.com/NW-Phase-Micro-step-Stepper-CD-ROM/dp/B075L2YFP3 its the motor i have
@@KaanHendek this is better than the motor used at the video
ok thanks
Laser torch price???
Hello, what did you use as a power source?
9v adapter
@@Kady3DPrinting how many amps?
Could you write me some link arduino and cnc shield and more tools? Thank you!
It depends on your location
@@Kady3DPrinting in Hungary for example from ebay?
@@horvath_zsolt yes
@@Kady3DPrinting please give me some link to the tools, where I can buy parts for Mini Laser Engraver
@@Kady3DPrinting I would to build mini laser engraver
Can i get the code of this project ???
جميل جدا انا احتاج الكود
What is feed rate
Can you sell this machine?
I'm from Egypt, it will be hard job
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks
how to use laser wort
What is that?
Здравствуйте можно увидеть схему подключения лазера без макетной платы?
Thanks, any suggestions for the next video?
Can this lase engraver cut boarss
Depends on the module power specs
votre imprimant 3d vous avez fabriquer par vous meme
I cant find the stl files.Who can help me?
Did you try the link at the description box ?
@@Kady3DPrinting I am Chinese.My VPN is not good.
唉:-(
ممكن رفع ملفات stl علي thing verse هيكون افضل
التصميم مصدره من على thingversa اسمه Mini CNC Laser Engraver
by maggie_shah
Sir i want theses plastic parts..
Searched for a local 3d printing provider, give him the files and he will print all that for you
does anyone have the code, please help!!
Does this work
I have to make a school project
Code kaha hai
How do you get so many views?
I'm depending on ads for a while because the cannel is new
@@Kady3DPrinting I understand. I also struggle to get any views.
Can you make a full body sculpture of toothless from how to train your Dragon and I want you to make this character for me in the next video your making I want you to 3D print toothless and actually his whole body. Can you do that for me please say yes please and I want you to do that for me please pretty pretty pretty please with sprinkles on top.
Sir programs
عليا الطلبات لاعمل قناة واحط عليكم
اي ال😎حلوه دي😘😘
high work yasta
I
Idr
the diagrams you have provided are a joke.
also, i see this is a rip-off of this guy's video: th-cam.com/video/5HvFPYaVtQs/w-d-xo.html&ab_channel=TheWrench
Heyy I'm having problem with Grbl
1. How to set the size according to my Cnc bed size
2. How to control the speed
3. Why my code of Arduino Uno is not showing file in Grbl
Please resolve my issue
For further details please contact me
❤
Hello can tou sand code?