check out DIY incredible suds. 1 ounce power wash in foam cannon. They now have gallon sizes. Also check out DP foam soap extreme, 3D super soap, MTM Extreme Cleaner PerFOAMance soap, and dr beasleys premium body wash.
“Magical Georgia red clay mixture” 😂 during the Timelapse the foam barley moved 😵💫 that really is some thick foam! Seemed to do a decent amount of cleaning for being a PH neutral soap.
Definitely an interesting product to review. For me itd be something I'd have on hand to use occasionally but definitely not a staple in the arsenal. Thanks bud.
Hey Keav I just bought mine by your recommendation but how do you do a maintenance on it like changing the filter ??? Can you do a video on it there's nothing out there for the MJJC foam Cannon in how to change the filter or maintenance,,, thanks for your videos there always awesome....
I have the MJCC Pro Foam cannon 2 and it doesn’t create foam like your video, dilution rate is 2 -3 oz of Chemical Guys Watermelon foam and 450 ml of warm distilled water and 1.25 orifice… I also changed the 3 filters and still no change. Thank You
@@tomgomez5807 With that kind of pressure washer with a 1.5 it has to be the water quality or a defective unit which I have not heard of any being defective. You have hard water?
I asked MJJC for a discount code and they delivered. Discount Code CarsWithKeav saves 10%. If you are looking to buy use the following link to support the channel as this is not available on Amazon. www.mjjc.com/products/mjjc-foam-600ml/?ref=71
Not on Amazon yet and not sure when. Here is my affiliate link to their site, but they charge shipping so use code CarsWithKeav to save 10%. www.mjjc.com/products/mjjc-foam-600ml/?ref=71
Hi There. I have Karcher K5 and MJJC 2.0. when I install the orifice 1.1 the pressure washer start and stops continually when I spray. but when I use the orifice 1.25 the pressure washer works fine. do you have an idea how to solve this?
Possibly you are hitting some kind of safety with the amount of AMP’s being used or it’s too much back pressure with the smaller orifice. I prefer the 1.25 even if less foam it puts way less stress on your pressure washer.
It's on my list to try out. Use my first P&S product yesterday their Rags to Riches Microfiber detergent and it was great. Everybody has a favorite so this list is super long. LOL
In terms of foam, literally the worst soap I've ever used. Started with standard 2oz. Went to 1:1 ratio and still like warm bud light coming out. I have gallon jugs of P&S products so I know they're normally great but this was a bust. I will say that I did get a little better foam in IK 12 than with cannon for what that's worth.
Another great video Keav. I think $2.50/wash is too much considering that there are so many more economical and effective alternatives that are less than $1. They need to find a way to provide more value.
What economical alternatives are you using that only cost $1 per wash. Assuming we are doing a full foam cannon and 2 gallons in a bucket. Might be a good idea for a video.
@@CarsWithKeav I am currently using CG Mr. Pink with the MJJC. Foam and cleaning are effective and its under $1 per wash. I am sure that there are many others.
check out DIY incredible suds. 1 ounce power wash in foam cannon. They now have gallon sizes.
Also check out DP foam soap extreme, 3D super soap, MTM Extreme Cleaner PerFOAMance soap, and dr beasleys premium body wash.
Incredible suds video will be done soon. Yvan and Nick reached out and sent me some product to review.
“Magical Georgia red clay mixture” 😂 during the Timelapse the foam barley moved 😵💫 that really is some thick foam! Seemed to do a decent amount of cleaning for being a PH neutral soap.
Thick foam tends to stick and move slow on top of dirty film. Takes a bit to break the heavy dirt down.
Good review! Maybe if it was sold in gallon size it’d be worth purchasing!
Yeah, got to get that cost down or even a more concentrated formula that you can dilute more.
Definitely an interesting product to review. For me itd be something I'd have on hand to use occasionally but definitely not a staple in the arsenal. Thanks bud.
It’s good for foam, but no other benefit for the cost.
Hey Keav I just bought mine by your recommendation but how do you do a maintenance on it like changing the filter ??? Can you do a video on it there's nothing out there for the MJJC foam Cannon in how to change the filter or maintenance,,, thanks for your videos there always awesome....
I’ll look into doing one, but in the meantime check out this video. Josh has a great channel. th-cam.com/video/zmEgrOIrgvg/w-d-xo.html
I have the MJCC Pro Foam cannon 2 and it doesn’t create foam like your video, dilution rate is 2 -3 oz of Chemical Guys Watermelon foam and 450 ml of warm distilled water and 1.25 orifice… I also changed the
3 filters and still no change.
Thank You
What pressure washer you using and what is your water quality (ppm).
Simpson Gas 3200 PSI with 2.5 GPM
And unsure what my water is…
@@tomgomez5807 With that kind of pressure washer with a 1.5 it has to be the water quality or a defective unit which I have not heard of any being defective. You have hard water?
Not to bad, don’t get water spots very often when cleaning my 2 cars…
"Oh my Gosh!" shirts in the future? xD thanks for another vid Keav.
I got a few sayings that might work on a shirt. I like "Now that's some foam" as well. LOL
I asked MJJC for a discount code and they delivered. Discount Code CarsWithKeav saves 10%. If you are looking to buy use the following link to support the channel as this is not available on Amazon. www.mjjc.com/products/mjjc-foam-600ml/?ref=71
Not bad not bad, packaging is super nice and different too 👍🏽👍🏽
I appreciate the packaging because it is being shipped from China.
There’s no link for the soap. I was hoping to get it on Amazon..lol
Not on Amazon yet and not sure when. Here is my affiliate link to their site, but they charge shipping so use code CarsWithKeav to save 10%.
www.mjjc.com/products/mjjc-foam-600ml/?ref=71
I’m working to get a discount code just unsure if they will give me one.
They delivered on the discount code. CarsWithKeav will save 10%
Hi There. I have Karcher K5 and MJJC 2.0. when I install the orifice 1.1 the pressure washer start and stops continually when I spray. but when I use the orifice 1.25 the pressure washer works fine. do you have an idea how to solve this?
Possibly you are hitting some kind of safety with the amount of AMP’s being used or it’s too much back pressure with the smaller orifice. I prefer the 1.25 even if less foam it puts way less stress on your pressure washer.
@@CarsWithKeav Thanx for the response. I’ll take this advice.
For a maintenance wash, nothing beats P and S Pearl.
It's on my list to try out. Use my first P&S product yesterday their Rags to Riches Microfiber detergent and it was great. Everybody has a favorite so this list is super long. LOL
In terms of foam, literally the worst soap I've ever used. Started with standard 2oz. Went to 1:1 ratio and still like warm bud light coming out. I have gallon jugs of P&S products so I know they're normally great but this was a bust. I will say that I did get a little better foam in IK 12 than with cannon for what that's worth.
Another great video Keav. I think $2.50/wash is too much considering that there are so many more economical and effective alternatives that are less than $1. They need to find a way to provide more value.
What economical alternatives are you using that only cost $1 per wash. Assuming we are doing a full foam cannon and 2 gallons in a bucket. Might be a good idea for a video.
@@CarsWithKeav I am currently using CG Mr. Pink with the MJJC. Foam and cleaning are effective and its under $1 per wash. I am sure that there are many others.
Nice video
Thx
MJJC + MJJC soap 🧼 👌🏻. Great review. This won't fit every one 's preferences but looks decent.
It does really well for a PH neutral and for cost saving you could dilute this way down.