I just got an MJJC Foam Cannon S V3.0 (here ib the UK) to use with my Karcher K2 (8 years old), and Bilt Hamber Auto-Foam, which as you know is not known as super foamy. I put the smaller orifice into the canon, and at only 2% PIR I got the most amazing foam I could imagine. I'm blown away with how good it is. This proves that it is a great addition to a low pressure washer system as that small apperture works wonders. It feels solid and the weighted tube in te reservoir measn that I can use it at angle which helps. Thanks for all your reviews Pan, I love watching them, and have picked up some greatt ips along the way👍👍👍.
Great video as usual Pan! I have the 2.0 and prefer that model because of the wider base of the bottle, which helps to keep it from tipping over. You always go into much more detail than other people do when reviewing a product. Keep up the awesome work.
Me too. Having a wider base on the older bottle was their selling point. And the older bottle had what appeared to be sturdier plastic. I'll stick with my old one.
Started the upgrade process with the Mtm pf22.2 and sh35 gun and extension. Recently got the Mjjc pro v2 and the different is thickness with the 1.1 mm orifices is insane. So much thick foam. Looking to slowly turn my next garage into a set up like yours or Hawaii detailing thanks Pan! 👍
Had the Griot's Garage Brilliant Finish foam cannon and found that after the foam quality deteriorated, it was impossible to disassemble to change the screen. They use super glue to assemble it to align the nozzle. Whoever put it together put so much super glue on the threads that no amount of muscle using the 2 correct size wrenches would budge it. I eventually locked it in a vise and had to hammer on the wrench to break it loose. Needless to say this pretty much destroyed it and the threads were so impacted with super glue that it could never be reassembled. No help from Griots. Got an MJJC now and a world of difference. Easy to get apart for maintenance and all around better.
I would like to see these cannons go up against MTM PF22.2 foam cannon. I do like the weighted tube and was wondering if it would fit on your MTM cannon? MJJC cannons seem to have longer spray head then MTM foam cannon. Nice review of these 2 products.
I have the griott’s garage brilliant finish and the weight at the end of the tube caused rusting with residual moisture both on the ball and inside the bottle. Also the tube cracked and I had to cut off about an inch and stick it back to the lid. Looking at replacing with either the MTM PF22.2 or the MJJC S v3.0. But the new wide mouth version of the MTM looks disappointing, so I’ll be getting the MJJC! Thanks as always for the amazing, honest, impartial, and extremely detailed reviews. Keep it going! And congrats again on the new product line!
Yeah I prefer MJJC Foam Cannon S v3 compared to MTM I even have the MJJC in Pan’s top picks on my website: thehouseofrags.com/collections/pans-picks/products/pans-picks-mjjc-foam-cannon-s-v3-0-with-1-4-quick-connect
I have the new 3.0 S one and it's the best foam cannon I've ever had, but, just as an experiment i ordered a cheap one from a random brand from amazon and i found that it does ALMOST, not the same, but close, to the same foam. MJJC is way better in terms of quality of construction but it's interesting to see that cheap one are getting better. In terms of reliability, i think that the MJJC one is going to last a lot more, but costs 3x more that the cheaper one i ordered. If i had to choose one i would choose MJJC, no doubt.
These videos are always fun to watch as everyone loves a good foam! Like you I have the MTM foam cannon and after a few years is works like new still. For me I value performance and can I service the parts when they fail. If I was buying today I would go with the MJJ because of equal performance to the MTM but with a bigger mouth to pour the soap in without having to use a funnel. Thank you for another great video Pan!
to me it looks like the 3.0 makes like 5% thicker foam, i have the 3.0 aswell and i can say that so far i am extremely happy with it, i would buy it anytime again, no 2nd thoughts
I have the Griots cannon for a few years now. Love it! Had one issue where the ball weight on the tube started to rust and they replaced it with ease. No issue with the replacement ball for about a year now, and I'm more diligent about cleaning and drying it. Griots customer service was excellent.
I love that the neck of the bottle is wide as it makes it easier to add product or rinse out 😎👍 That price tag is a bit of a tough pill to swallow considering it is not using the premium materials as something like the PF22 from the housing and plastic bottle. I might need to do a review video as well 🤣 Thank you Pan for showcasing this demo! Appreciate your work that goes into these!
I bought the Sooprinse foam cannon off Amazon for $20. I put in a 1.1mm orifice as well, and so far it has worked great. It definitely doesn't feel as durable as some of those other foam cannons look.
I’m holding out for the MJJC Pro v3 which the company claims will be out by the end of 2023. It is rumored to combine the best features of the two you present (quick twist of sv3, wide mouth/stable design of pro v2), stainless steel parts and potentially more foam generation. Looking forward to its release and testing…
I use warm distilled water and it makes even the cheap foam cannons work better. Also coated vehicles probable don’t keep the foam on as long as an uncoated surface.
Great video as always, thx Pan! So I hope MTM is watching closely. I like their internals, but agree that the bottle opening needs to be enlarged and while we're at it, a flexible weight syphon tube couldn't hurt. Careful MTM... MJJC might steal your lunch. 😮!!
Thanks for the positive feedback! I appreciate it. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer I recently purchased one of my dream cars and started looking around for info around getting ready to care for it properly. You just sorta organically started coming up all over the place in my searches. Not exactly a surprise given the comprehensiveness of your content in the detailing space. You come across as a good fella too, which always makes it more enjoyable. I have no doubt you work your butt off, but it definitely seems somewhat effortless for ya. You seem quite organized. I really appreciate your content man, a clearly many others do as well ;-0
Great, great review Panos... I have the MTM and even though it's foam is nice, it is a little too runny and the bottle seems to empty very quickly. I also run the same Kranzle PW as you so thats why I might be considering to change but you are right, the MTM is very well built... Thanks as always for your AWESOME video.
I had a small issue. I bought the blue one mjjc foam cannon , I was walking in the garage with the lid opened and a white rubber ring felt on the floor. That white rubber ring is important to make a tight seal when using it. This happened after I cleaned the equipment. I could have easily lost the white rubber ring if I had not payed attention. I had the top portion in 1 hand and the bottle portion on the other hand. Besides that the equipment is amazing.
I appreciate that! Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
Hi Pan, thanks for another first class review. Yes I'd like to see another cannon battle, perhaps including the Pyramid Car Care Hydro foam cannon which I've recently become aware of 🤔
Unless quantity of snow foam mixed in my cannon is an issue (it isn't currently), I would go with the MJJC Pro v2.0. The biggest difference I've found in my snow foam cannon is the pressure washer behind it. I've got the Karcher 1700 and my snow foam tends to be runny, regardless of which orifice I have installed (paired with Adam's soaps/Mega foam and soft water). All snow foam cannons have an adjustable/replaceable orifice. Wide mouth is a must. I personally prefer shorter, stout bottles as they're less likely to tip over, especially when taller ones with high volume become MORE top heavy. The clear bottle on such a tall bottle with the V3.0 would start to look tattered very quickly as it falls over regularly. Also, I'm VERY happy to see that you remain objective, Pan. I've looked at a lot of OG's content for reviews and objective comparison, but found that most of the items OG carries tend to be the best of the best, money-is-no-object items that some of us don't have the money to spend/justify for personal use.
Hi, thank you for producing and sharing this presentation. I enjoy them. On this particular one - I was going to buy this 3.0 Foam Cannon, but I noticed on the Amazon page it is shown withOUT the clear bottle, unlike the way it appears in your video. I really do prefer to be able to see the contents of the bottle, so I guess I'll have to shop for a different one. Thanks tho, wish you the best.
I do have an issue with my PRO 2.0, after a couple of months of weekly use, I can't close the bottle, seems like the thread on the bottle side and the one on the top don't fit perfectly as when it was brand new. Several times when I'm washing my car, the bottle fell out to the floor, super annoying. I'm looking to upgrade to the v3 version, hoping, as you said, to the closing mechanism to be improved. Great video, Pan!
I prefer the Pro V2, the stronger, lower, wider bottle is more durable and even less likely to tip over. The even wider mouth enables it to be cleaned SO easy after! The clarity of the S V3 is neat but the Pro V2 is opaque enough to see color and contents. Both are my top two foam cannons even over the MTM PF22.2.
I'm a big fan of MJJC and personally I like them both but the pro does seem to be a tad easier to deal with when setting them both down but my neighbors think the 3.0 is so cool looking & so do I. lol
Thanks for watching! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 960,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer I recently purchased a Karcher Premium K4 to wash our family cars. Then I started to watch detailing videos to get advice on techniques and accessories and I found your channel and I've been watching your updates ever since.
Pan, did you do a video yet on the MJJC Foam Cannon Pro V 3.0? I always take your tips and reccommendations when detailing my own cars and cars of friends and family. Keep up the Fantastic work as it keeps us up on the best products out there and their price range. Thanks!
@@PanTheOrganizer There was a listing on ebay by someone claiming to have the Pro V3.0...The listing has since been taken down, so now I do not know if it truly was the V3.0 or the S V3.0. My bad I should have taken a screen shot when I first saw it. Or maybe my eyes failed me! lol
Appreciate your advice on flushing the foam cannon after use. I am about to receive my new foam cannon and was not flushing the "free" cannon that came with my Active 2.0 pressure washer. I can maintain my new foam cannon correctly straight out of the gate.
Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
Pan, do you run your detail business out of your home garage? Is it difficult to get your customers to come to your home address? Do you tell them they’ll need someone to pick them up? Or let them hang out while you work in their vehicle?
Yes I detail from my home's garage. I designed the garage specifically for car detailing. I never have issues to have customers come, especially since starting the channel, I could do multiple cars each day if I had the time, as you can imagine with an audience of nearly 1 million subscribers and many more watching. Some do up to 15 hours of driving to come and see me, and rent a hotel room nearby. They have to drop off their vehicle on day 1, and come back to pick it up the following day. Yes they need a lift to come and go. Nobody is allowed to stay and "hang out" out of respect for my family, and neighbours. I want privacy.
😁👍🏻 Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
I just the 3.0 in over the weekend, does fantastic! I feel like I was missing so much more from a foam cannon once I got this one. I haven’t tried the 1.1 yet, but does give a thick foam (using GSF) with my Ryobi 2000 pressure washer.
Using an Active 2.3 so apparently stuck using a 1.45mm orifice which is almost impossible to find. Fortunately, they include one with the PW. Hoping to try a 1.4mm one and not imperil the washer or pop a 15 amp cb.
Hi Pan, thanks for a detailed video - I am struggling to understand why MJJC are offering both these foam cannons - the differences between the two models appear minimal
I have the MTM and the Pro 2.0 and find the Pro 2.0 to be more consistent. I also prefer the plastic to plastic screw top on the Pro 2.0, very easy to over tighten the metal to plastic one on the MTM. Looking to forward to the Pro 3.0!
Awesome demo Pan👏🏻! I personally think there are no performance differeneces between the Foam Cannon S V3.0 and the Foam Cannon Pro V2.0, both work super well and create nice thick foam👌🏻. Perhaps the change of orifice made the foam slightly thicker, but your pressure washer set up is so good anyways, that the difference is pretty much impossible to notice🙂.
Once again awesome details for us. I have the 2.0 as well as the MTM PF22.2 and really prefer the MJJC 2.0. It just gives me that shaving cream-like foam better than the MJJC. Heck, even my 11-year-old daughter likes foaming up her ATV after a muddy ride to clean it up. Pan, you make detailing with all these toys just fun for us guys who just take care of our own cars and trucks.
Great show off pan , I never change the orifice out , I also have the kranzle. I did test the orifice swap on another foam cannon and the foam was a little more but not enough to justify taking a screw driver out haha 😂.
Hey Pan, I was a bit frustrated with the MJJC S V3.0. It leaks water when you turn it upside down ( like many others) however after only 4 washes where I used warm distilled water, mild shampoo, low PSI pressure washer, rinse it etc... The water started to leak from the screw on knob in the back. I hand tightened it but water kept on leaking reducing foam pressure. When I unscrewed it I noticed pieces of black debris coming out from the threads ie the O-ring was totally eroded. For a foam cannon that comes at a premium price, I expect MJJC to put quality O-rings inside .. and not cheap out on O-rings. I put some teflon tape on the thread ...it worked better but still not 100% sealed. I know it happens but not after 4 uses .. Just sharing my experience with this foam cannon
Hmmm, seems like you were unlucky. First time I see a feedback like this for the V3, mine has zero issues, and I haven't read any viewer feedback that had issues with that. But thanks for sharing. Did you reach out to MJJC or the place where you ordered it from? I'm sure someone can do something about it. You likely got a faulty unit.
@@PanTheOrganizer yes sir :). I called Andrew from CarZ and he said it happened but rarely and he will send me a 1/4” Oring. Don’t know how to take out the remaining of the existing one and put a new one in. It looks like it is very deep. I will try. Couldn’t find a video on how to change that one lol. I also emailed MJJC with pictures. Just out of curiosity to see if they stand by their products. I will let you know 😂. Appreciate a lot your support.
Cool man! Nice to see he's taking care of you. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 1 million subscribers and we have over 140 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer a couple of years ago, I got interested in car detailing just as a hobby for fun to wash our cars. Last year after I got the ioniq 5 matte I searched for a matte paint guide and your videos were spot on. Besides that we live in the same city 😊. I bought all my tools and chemicals upon your recommendation. And I am happy with the results. I can’t wash the car in the garage so winter is challenging for matte paint under the Tempo :(
Love you pan. Thank you for your guidance man your videos helped me make the best decisions pertaining to my business. I have this mjjc foam cannon too, its amazing.
Hey Pan, awesome video. I was about to ask which one you like best and than saw that you said MTM. Would love to see an updated Foam Cannon Showdown. Keep up the great work Thanks
Another awesome video pan I've been using the mjjc pro2 for over a year and it is absolutely the best foam Cannon you can buy. I use it with my active 2.0 pressure washer it is absolutely amazing. I like to use 3 oz of Meguiars hyper wash and an 1 oz of purple Power.
Hey Pan, thanks for the video. Tuning in from Australia and noticed you don’t have links for us down under. Would love to try some of the products you showcase.
Unfortunately, I’m limited by the amount of text I can put in the video description, and it would be impossible for me to research links for all countries my subscribers come from.
off topick.. i just was thinking i have never sayed thank you for your's grate videos to me learning my self to clean and detailing cars, so thank you pan :)
Great to hear! Thanks for the positive feedback. Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
Thank you for your next great video. BTW you can measure diameter with digital calliper - it will be more accurate and result will be easier to present in videos.
Pan, as he said himself in different videos, is trying to make as best videos as possible. My advice was just about how he can make another improvement step.
Hi Pan, I saw that in some of your previous videos, you use brake buster in a foam cannon, while in other videos, you put it in IK foam pro 2. Do you have a preference? Which one do you use in your maintenance wash?
Enjoy! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
I have a Mach E GT. Should I wash my car the same way I would wash an ICE? For example, I use one peddle drive so there’s very little beak dust. Do you clean the wheels the same as an ICE car?
Friends, please guide me in detail, is the 1.25 nozzle suitable for devices with a working pressure of 180 bar and does it work well, or should I use the 1.35 nozzle?
Hi Pan, I recently bought a Karcher K7 compact and after that I had a problem with the quality of the foam. I thought my MTM PF22.2 was wrong, but the same thing happened with the MJJC S V 30 even though I changed all the recommended nozzles. After that, both MTM and MJJC worked perfectly fine on the Karcher K 4. What is the problem here? Thank you
Hard to say as I'm not there to observe potential issues. A K7 should give equal or better performance to a K4 pressure washer. We don't have the K7 in North America though. Perhaps try contacting Karcher to see if you have a faulty unit? There are many factors that influence the quantity, thickness and richness of snow foam: 1. Type of foam cannon (smaller orifices lead to thicker foam, but can potentially trip your circuit breaker depending on your setup) 2. Type of pressure washer (a higher amount of GPM water output leads to more foam, so a pressure washer with 1.3 GPM will produce less foam than one that pumps out 2.1 GPM) 3. Type of snow foam (not all snow foams produce the same amount of foam) 4. Dilution ratio of snow foam (adjust the dilution according to your setup. Start with the recommendations on the label, and increase the amount as needed). 5. Water quality. The better the water, the more foam and suds you get. So deionized water will always produce more foam compared to hard tap water, for example.
I have the pro 2.0 and was wondering what parts will eventually need replacing (filters, suction tube, etc) and if you ever had to change any of these? Thank you!
If you don't have issues, you don't have to replace anything. I haven't had the need to service mine since I got it. But I also take care of it. When I am done using it, I empty the container, rinse it out, fill it with warm water, run it through the foam cannon/pressure washer setup for 30 seconds, which flushes any soapy residue, let it air dry and it's ready for next time. See how I do it in a video where I show how to clean detailing tools and equipment: th-cam.com/video/6uFdYBqbT2Y/w-d-xo.htmlsi=BECrf_t7eh221jR9
@@PanTheOrganizer thank you very much! I’ve been just running it thru the pressure washer empty once it’s out of foam but since watching your video, I will now refill the cannon back up with warm water and then run it. Hopefully I didn’t already do any damage
Of course there is no difference. As you said the operating parts are the same. Only difference in making the choice is the bottle and straw differences
Great video, I love the tips you gave for the general use of foam canon. On an other subject following 2023 awards, i would love if you could add a cotegorie in tire shine and split gloss finish tire shine mate finish. I left you a comment detailling my tought on the award video, but i m not too surprise if you didn t see it, you had so many comment on that video. Good job pan keep the good work.
based on Pan's recommendation, I bought the MJJC foam cannon from Walmart's website. wow.... it's the best foam cannon every. In fact, my neighbors always watch me turn my cars into snow white cars... :) The only problem that I'm wondering is the coming winter. if it's below freezing outside, can I still use the foam cannon to wash the car?
Question for you sir I have the mjjc pro and I'm using a Sunjoe spx3000 with 1.76 psi and the foam Canon just start acting up lately it's not spitting out foam is there any way that I can fix it or should I just order another one of them small pieces to put in the cannon part
Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
Here's my video on cleaning wipers: th-cam.com/video/eB5NtttIkPE/w-d-xo.htmlsi=-MihLmoimUdBehPJ Any time you are looking for a topic, I most likely have a video on it. Here, you could have searched for "how to clean wipers Pan The Organizer" and you would have found my video.
Pan quick question I recently saw a video where the guy was saying you don’t want a heavy foam that you want the foam to be more running allowing the dirt to roll off. What’s your take on it. I had a cheap Amazon cannon & didn’t get all that much foam but now I bought the Boss Griots Garage which is giving me insane foam. Thanks
That’s like those who prefer rinsing before foaming or foaming on dry, etc There isn’t one right or wrong here it often boils down to personal preference. Some people prefer runnier foam and some prefer that shaving cream thick foam. For me, the more important thing is getting a quality product. I don’t mind if it’s runnier (like Bilt Hamber Touch-Less) or thicker (like DIY Detail Incredible Suds). Both are excellent for different reasons.
Kinda curious on why some foam cannons don't foam so good. I bought one from what I thought was a good company,paid almost $100 Canadian dollars for it and no matter what soap or what settings I try I never get thick foam. My pressure washer is rated at 1800 psi and 2.1 per minute.
Not all foam cannons are created equal. Which one did you buy? Also, there are many factors that influence the quantity, thickness and richness of snow foam: 1. Type of foam cannon (smaller orifices lead to thicker foam, but can potentially trip your circuit breaker depending on your setup) 2. Type of pressure washer (a higher amount of GPM water output leads to more foam, so a pressure washer with 1.3 GPM will produce less foam than one that pumps out 2.1 GPM) 3. Type of snow foam (not all snow foams produce the same amount of foam) 4. Dilution ratio of snow foam (adjust the dilution according to your setup. Start with the recommendations on the label, and increase the amount as needed). 5. Water quality. The better the water, the more foam and suds you get. So deionized water will always produce more foam compared to hard tap water, for example.
@@PanTheOrganizer I bought the Autoglym foam cannon, pressure washer puts out 1800 psi and 2.1 GPM. I have tried most soaps on the market, incredible suds,Adams mega foam,chem.guys the only way I can get thick foam is to double or triple what they say to add.
Hey Pan, love you videos! I just got a brand new car and I noticed there are tiny water spots on the glass and it starts to annoy me when the sun hits it just right. I was thinking about buying invisible glass: glass stripper and soft 99: glaco ultra for the windshield. Should I use a glass stripper this early on a new car or would that destroy any of the current protection on the glass?
No problem as most dealerships don't apply any sort of protection, just make sure you do it correctly and correct application. Pan has more than 1 video on how to do it 😄
Yes you can use the glass stripper right away, you can even machine polish the glass too if the stripper isn’t enough. And you actually want to remove any cheap protection that might be on the windshield anyways, so the Ultra Glaco can have the best bond to the glass.
I have a Kranzle 1322TSS. I had an MJJC foam cannon pro v2 which lasted a long time and started shooting soap water. So I changed the filter and clean the weighted filter ball in the foam cannon as well. Still soapy water. So I bought a brand new MJJC FOAM CANNON PRO V2 and still the same thing. When I tried using my MTM PF22.2 it works fine and gives nice foam. Why do you think both the older and new MJJC foam cannon pro v2 are giving soap water? Any advice appreciated! Pressure seems good when using all the foam cannon but with the MJJC seems like it has less flow of water for some reason. I could be wrong but that’s what it seems like. The dial to control the amount of foam is turned all the way to max foam so idk what else to do? Should I buy the new MJJC foam cannon S v3 and try that or should I stay away from MJJC foam cannons now? MJJC foam cannons are my favorite so I would hate to change to a different brand. Please help! Thank you!
For washing cars, you want 1000 to 2000 psi max. Don’t go over 2000 psi. What we look for is the highest water flow rating (gpm). 1.3 gpm being on the low end and 2.0 gpm being on the awesome end. See my video on different pressure washer recommendations at different price points here: th-cam.com/video/_UwK_0VDK0o/w-d-xo.htmlsi=MVRkpFHgNbmGqW36
Hey pan! Have just gone through a lot of your videos and purchased a lot of your recommendations - I was going to buy the eFoam pro but realized its $250 I mostly wanted it just to apply the brake buster you recommended. I have two spare foam cannons am I able to just use those instead of the eFoam pro I would just normally spray it but its not as cool looking and satisfying as what it looks like in your videos hahaha. Do you have any other eFoam recommendations?
🔥 For more quality detailing products visit: bit.ly/3BiPe3o
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
MJJC Foam Cannon S V3.0: bit.ly/3Y9pUEP
MJJC Foam Cannon S V3.0: amzn.to/3QBzqOG
MJJC Foam Cannon Pro V2.0: amzn.to/3tSI2Yi
Adam’s Mega Foam snow foam: amzn.to/44qsAPv
MTM PF22.2 foam cannon: amzn.to/3qtTeZN
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3QXdXA7
Water deionizer: bit.ly/3AMsMKf
Kranzle 1122TS pressure washer: bit.ly/3Fw4xp8
Mosmatic gun and wand package: bit.ly/3sQxxAh
Measuring pitcher: amzn.to/3DVcT83
🇨🇦 For people in Canada:
MJJC Foam Cannon S V3.0: bit.ly/3OTTv1B
MJJC Foam Cannon Pro V2.0: bit.ly/3ltOq3r
Adam’s Mega Foam Snow Foam: bit.ly/3rIBuqE
MTM PF22.2 foam cannon: bit.ly/3ChOGaN
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3YyxvMQ
Water deionizer: bit.ly/3s4Cusk
Pressure washer: bit.ly/3MgYINZ
Gun & wand: bit.ly/3EBUZbI
Measuring pitcher: amzn.to/47wqaBu
🇬🇧 For people in the UK:
MJJC Foam Cannon S V3.0: bit.ly/45ePsCr
MJJC Foam Cannon S V3.0: amzn.to/3DTdYx5
MJJC Foam Cannon Pro V2.0: amzn.to/3YsEWVT
MTM PF22.2 foam lance: bit.ly/3edrrqt
Snow foam: amzn.to/47xBEEM
Water deionizer: amzn.to/3OVnupQ
My pressure washer: amzn.to/3shsFHw
Measuring pitcher: amzn.to/3DTXZim
I just got an MJJC Foam Cannon S V3.0 (here ib the UK) to use with my Karcher K2 (8 years old), and Bilt Hamber Auto-Foam, which as you know is not known as super foamy. I put the smaller orifice into the canon, and at only 2% PIR I got the most amazing foam I could imagine. I'm blown away with how good it is. This proves that it is a great addition to a low pressure washer system as that small apperture works wonders. It feels solid and the weighted tube in te reservoir measn that I can use it at angle which helps. Thanks for all your reviews Pan, I love watching them, and have picked up some greatt ips along the way👍👍👍.
Thanks Mark!!
Hi I'm not quite convinced on snow foam vs my soft car brush and TurtWax ceramic soap, will I just foam the car and rinse it off and that's it
Great video as usual Pan! I have the 2.0 and prefer that model because of the wider base of the bottle, which helps to keep it from tipping over. You always go into much more detail than other people do when reviewing a product. Keep up the awesome work.
Me too. Having a wider base on the older bottle was their selling point. And the older bottle had what appeared to be sturdier plastic. I'll stick with my old one.
You have the MJJC Pro 2.0. The other product is the S line, it has its own version numbers, MJJC S 3.0
Thanks Archie. I appreciate the kind words.
@@pantac4493 I know
@@archiepezek yeah. I think it’s the other guy that doesn’t know
Nice review…and a good reminder about rinsing the internals of foam cannons. Thanks, Pan. 👍
Thanks for watching!
Started the upgrade process with the Mtm pf22.2 and sh35 gun and extension. Recently got the Mjjc pro v2 and the different is thickness with the 1.1 mm orifices is insane. So much thick foam. Looking to slowly turn my next garage into a set up like yours or Hawaii detailing thanks Pan! 👍
😁👍🏻
Would love to see a video comparing pump sprayers/battery pump sprayers battle! I use these for rinseless washes so that would be awesome to see.
Great suggestion!
Had the Griot's Garage Brilliant Finish foam cannon and found that after the foam quality deteriorated, it was impossible to disassemble to change the screen. They use super glue to assemble it to align the nozzle. Whoever put it together put so much super glue on the threads that no amount of muscle using the 2 correct size wrenches would budge it. I eventually locked it in a vise and had to hammer on the wrench to break it loose. Needless to say this pretty much destroyed it and the threads were so impacted with super glue that it could never be reassembled. No help from Griots. Got an MJJC now and a world of difference. Easy to get apart for maintenance and all around better.
I would like to see these cannons go up against MTM PF22.2 foam cannon. I do like the weighted tube and was wondering if it would fit on your MTM cannon? MJJC cannons seem to have longer spray head then MTM foam cannon. Nice review of these 2 products.
Thanks
I have the griott’s garage brilliant finish and the weight at the end of the tube caused rusting with residual moisture both on the ball and inside the bottle. Also the tube cracked and I had to cut off about an inch and stick it back to the lid.
Looking at replacing with either the MTM PF22.2 or the MJJC S v3.0. But the new wide mouth version of the MTM looks disappointing, so I’ll be getting the MJJC!
Thanks as always for the amazing, honest, impartial, and extremely detailed reviews. Keep it going! And congrats again on the new product line!
Yeah I prefer MJJC Foam Cannon S v3 compared to MTM
I even have the MJJC in Pan’s top picks on my website: thehouseofrags.com/collections/pans-picks/products/pans-picks-mjjc-foam-cannon-s-v3-0-with-1-4-quick-connect
I have the new 3.0 S one and it's the best foam cannon I've ever had, but, just as an experiment i ordered a cheap one from a random brand from amazon and i found that it does ALMOST, not the same, but close, to the same foam. MJJC is way better in terms of quality of construction but it's interesting to see that cheap one are getting better. In terms of reliability, i think that the MJJC one is going to last a lot more, but costs 3x more that the cheaper one i ordered. If i had to choose one i would choose MJJC, no doubt.
These videos are always fun to watch as everyone loves a good foam! Like you I have the MTM foam cannon and after a few years is works like new still. For me I value performance and can I service the parts when they fail. If I was buying today I would go with the MJJ because of equal performance to the MTM but with a bigger mouth to pour the soap in without having to use a funnel. Thank you for another great video Pan!
Tanks Neil. Always nice to see regular viewers like you supporting my channel and videos.
MTM makes a wide mouth….
to me it looks like the 3.0 makes like 5% thicker foam, i have the 3.0 aswell and i can say that so far i am extremely happy with it, i would buy it anytime again, no 2nd thoughts
I have the Griots cannon for a few years now. Love it! Had one issue where the ball weight on the tube started to rust and they replaced it with ease. No issue with the replacement ball for about a year now, and I'm more diligent about cleaning and drying it. Griots customer service was excellent.
I did have to buy the 1.1 orifice separately ($7) and that made it much better with my electric pressure washer.
I love that the neck of the bottle is wide as it makes it easier to add product or rinse out 😎👍 That price tag is a bit of a tough pill to swallow considering it is not using the premium materials as something like the PF22 from the housing and plastic bottle.
I might need to do a review video as well 🤣 Thank you Pan for showcasing this demo! Appreciate your work that goes into these!
Thanks man! I hope you are doing well.
I bought the Sooprinse foam cannon off Amazon for $20. I put in a 1.1mm orifice as well, and so far it has worked great. It definitely doesn't feel as durable as some of those other foam cannons look.
Never heard of that brand.
I’m holding out for the MJJC Pro v3 which the company claims will be out by the end of 2023. It is rumored to combine the best features of the two you present (quick twist of sv3, wide mouth/stable design of pro v2), stainless steel parts and potentially more foam generation. Looking forward to its release and testing…
I talked to them just yesterday and I was told it’s being delayed till 2024 hopefully before spring.
I’m looking forward to it too.
You don't really need it.
@@PanTheOrganizerfirst foam cannon; MTM or MJJC V3?
I use warm distilled water and it makes even the cheap foam cannons work better. Also coated vehicles probable don’t keep the foam on as long as an uncoated surface.
Great video as always, thx Pan! So I hope MTM is watching closely. I like their internals, but agree that the bottle opening needs to be enlarged and while we're at it, a flexible weight syphon tube couldn't hurt. Careful MTM... MJJC might steal your lunch. 😮!!
;)
Your videos reign supreme in this space. You are doing an incredible job. Keep it up. I have learned a ton since I have found your content.
Thanks for the positive feedback! I appreciate it. How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer I recently purchased one of my dream cars and started looking around for info around getting ready to care for it properly.
You just sorta organically started coming up all over the place in my searches. Not exactly a surprise given the comprehensiveness of your content in the detailing space.
You come across as a good fella too, which always makes it more enjoyable. I have no doubt you work your butt off, but it definitely seems somewhat effortless for ya. You seem quite organized. I really appreciate your content man, a clearly many others do as well ;-0
Great, great review Panos... I have the MTM and even though it's foam is nice, it is a little too runny and the bottle seems to empty very quickly. I also run the same Kranzle PW as you so thats why I might be considering to change but you are right, the MTM is very well built... Thanks as always for your AWESOME video.
Thanks!
I had a small issue. I bought the blue one mjjc foam cannon , I was walking in the garage with the lid opened and a white rubber ring felt on the floor. That white rubber ring is important to make a tight seal when using it. This happened after I cleaned the equipment. I could have easily lost the white rubber ring if I had not payed attention. I had the top portion in 1 hand and the bottle portion on the other hand. Besides that the equipment is amazing.
Simply the best TH-cam channel about call car detail thanks Pan
I appreciate that! Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Can I connect the container to a garden hose or I need a pressure washer😊
I like the pro version in almost every way except for the way the head attaches to the bottle
I can’t wait to see what the Pro V3 will be like.
Hi Pan, thanks for another first class review. Yes I'd like to see another cannon battle, perhaps including the Pyramid Car Care Hydro foam cannon which I've recently become aware of 🤔
Thanks John!
Unless quantity of snow foam mixed in my cannon is an issue (it isn't currently), I would go with the MJJC Pro v2.0.
The biggest difference I've found in my snow foam cannon is the pressure washer behind it. I've got the Karcher 1700 and my snow foam tends to be runny, regardless of which orifice I have installed (paired with Adam's soaps/Mega foam and soft water). All snow foam cannons have an adjustable/replaceable orifice. Wide mouth is a must. I personally prefer shorter, stout bottles as they're less likely to tip over, especially when taller ones with high volume become MORE top heavy. The clear bottle on such a tall bottle with the V3.0 would start to look tattered very quickly as it falls over regularly.
Also, I'm VERY happy to see that you remain objective, Pan. I've looked at a lot of OG's content for reviews and objective comparison, but found that most of the items OG carries tend to be the best of the best, money-is-no-object items that some of us don't have the money to spend/justify for personal use.
Thanks for the feedback. :)
I like it the red one. The MTM HYDRO bottle sticks and at least for me the foam isn’t that great. I have tried different orifices but no good.
I just purchased this foam cannon yesterday and appreciate the pro tips you have shared. Keep up the good reviews Pan!
Thanks!
Got both cannons, I think I do prefer the pro jush because of the wider bottle which also seems more durable 👍
Good choice!
Hi, thank you for producing and sharing this presentation. I enjoy them. On this particular one - I was going to buy this 3.0 Foam Cannon, but I noticed on the Amazon page it is shown withOUT the clear bottle, unlike the way it appears in your video. I really do prefer to be able to see the contents of the bottle, so I guess I'll have to shop for a different one. Thanks tho, wish you the best.
The links work. Here’s the transparent bottle foam cannon: bit.ly/3Y9pUEP
Thank you!
I do have an issue with my PRO 2.0, after a couple of months of weekly use, I can't close the bottle, seems like the thread on the bottle side and the one on the top don't fit perfectly as when it was brand new. Several times when I'm washing my car, the bottle fell out to the floor, super annoying.
I'm looking to upgrade to the v3 version, hoping, as you said, to the closing mechanism to be improved.
Great video, Pan!
Thanks!
I only have one foam cannon and it’s the MJJC 2.0, I absolutely love it, great video Pan 👍😁
Thanks Dave!
I prefer the Pro V2, the stronger, lower, wider bottle is more durable and even less likely to tip over. The even wider mouth enables it to be cleaned SO easy after! The clarity of the S V3 is neat but the Pro V2 is opaque enough to see color and contents. Both are my top two foam cannons even over the MTM PF22.2.
Thanks for sharing!
I'm debating between foam cannons and the Ik E Foamer.
I'm a big fan of MJJC and personally I like them both but the pro does seem to be a tad easier to deal with when setting them both down but my neighbors think the 3.0 is so cool looking & so do I. lol
Nice review Pan. I like the easy screw on cap. That is appealing to me.
Thanks Michelle!
Definitely ordering two s3.0 cannons. They work flawlessly and look great. Thanks Pan ❤
Thanks for watching! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 960,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer I recently purchased a Karcher Premium K4 to wash our family cars. Then I started to watch detailing videos to get advice on techniques and accessories and I found your channel and I've been watching your updates ever since.
Cool! Merry Christmas!
What a paaaaaaaaaantastic review, I prefer version 2,0 because the bottle is more sturdy
Thanks Mike!
I think i like the pro a little more. Not only its a little bit more sturdy but it look like its more durable
Pan, did you do a video yet on the MJJC Foam Cannon Pro V 3.0? I always take your tips and reccommendations when detailing my own cars and cars of friends and family. Keep up the Fantastic work as it keeps us up on the best products out there and their price range. Thanks!
The Pro V3.0 hasn't been released yet to my knowledge. The most recent one is the S V3.0 shown in this video.
@@PanTheOrganizer There was a listing on ebay by someone claiming to have the Pro V3.0...The listing has since been taken down, so now I do not know if it truly was the V3.0 or the S V3.0. My bad I should have taken a screen shot when I first saw it. Or maybe my eyes failed me! lol
Excellent. Thanks. Have you tested the BOSS cannon?
Appreciate your advice on flushing the foam cannon after use. I am about to receive my new foam cannon and was not flushing the "free" cannon that came with my Active 2.0 pressure washer. I can maintain my new foam cannon correctly straight out of the gate.
Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Pan, do you run your detail business out of your home garage? Is it difficult to get your customers to come to your home address? Do you tell them they’ll need someone to pick them up? Or let them hang out while you work in their vehicle?
Yes I detail from my home's garage. I designed the garage specifically for car detailing. I never have issues to have customers come, especially since starting the channel, I could do multiple cars each day if I had the time, as you can imagine with an audience of nearly 1 million subscribers and many more watching. Some do up to 15 hours of driving to come and see me, and rent a hotel room nearby.
They have to drop off their vehicle on day 1, and come back to pick it up the following day. Yes they need a lift to come and go. Nobody is allowed to stay and "hang out" out of respect for my family, and neighbours. I want privacy.
Always watching your shows here in Argentina!!
😁👍🏻 Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
I just the 3.0 in over the weekend, does fantastic! I feel like I was missing so much more from a foam cannon once I got this one. I haven’t tried the 1.1 yet, but does give a thick foam (using GSF) with my Ryobi 2000 pressure washer.
I have a Ryobi, did you need to buy a special attachment to get it to mate correctly?
@@MisterDogg If you’re already using quick connects, you just simply connect to that.
@@YzFool78 thank you
Pan your the man ! Yes do a updated foam cannon battle with chemical guys wide mouth n all new upgraded mjjc's
Thanks!
Using an Active 2.3 so apparently stuck using a 1.45mm orifice which is almost impossible to find. Fortunately, they include one with the PW. Hoping to try a 1.4mm one and not imperil the washer or pop a 15 amp cb.
Hi Pan, thanks for a detailed video - I am struggling to understand why MJJC are offering both these foam cannons - the differences between the two models appear minimal
That’s a good question.
I have the MTM and the Pro 2.0 and find the Pro 2.0 to be more consistent. I also prefer the plastic to plastic screw top on the Pro 2.0, very easy to over tighten the metal to plastic one on the MTM. Looking to forward to the Pro 3.0!
Awesome demo Pan👏🏻! I personally think there are no performance differeneces between the Foam Cannon S V3.0 and the Foam Cannon Pro V2.0, both work super well and create nice thick foam👌🏻. Perhaps the change of orifice made the foam slightly thicker, but your pressure washer set up is so good anyways, that the difference is pretty much impossible to notice🙂.
👍🏻
@@PanTheOrganizer 👍🏻❤️
Once again awesome details for us. I have the 2.0 as well as the MTM PF22.2 and really prefer the MJJC 2.0. It just gives me that shaving cream-like foam better than the MJJC. Heck, even my 11-year-old daughter likes foaming up her ATV after a muddy ride to clean it up. Pan, you make detailing with all these toys just fun for us guys who just take care of our own cars and trucks.
Thanks! I truly appreciate the kind words and positive feedback.
Great show off pan , I never change the orifice out , I also have the kranzle. I did test the orifice swap on another foam cannon and the foam was a little more but not enough to justify taking a screw driver out haha 😂.
Thanks!
Hey Pan, I was a bit frustrated with the MJJC S V3.0. It leaks water when you turn it upside down ( like many others) however after only 4 washes where I used warm distilled water, mild shampoo, low PSI pressure washer, rinse it etc... The water started to leak from the screw on knob in the back. I hand tightened it but water kept on leaking reducing foam pressure. When I unscrewed it I noticed pieces of black debris coming out from the threads ie the O-ring was totally eroded. For a foam cannon that comes at a premium price, I expect MJJC to put quality O-rings inside .. and not cheap out on O-rings. I put some teflon tape on the thread ...it worked better but still not 100% sealed. I know it happens but not after 4 uses .. Just sharing my experience with this foam cannon
Hmmm, seems like you were unlucky. First time I see a feedback like this for the V3, mine has zero issues, and I haven't read any viewer feedback that had issues with that. But thanks for sharing.
Did you reach out to MJJC or the place where you ordered it from? I'm sure someone can do something about it. You likely got a faulty unit.
@@PanTheOrganizer yes sir :). I called Andrew from CarZ and he said it happened but rarely and he will send me a 1/4” Oring. Don’t know how to take out the remaining of the existing one and put a new one in. It looks like it is very deep. I will try. Couldn’t find a video on how to change that one lol. I also emailed MJJC with pictures. Just out of curiosity to see if they stand by their products. I will let you know 😂. Appreciate a lot your support.
Cool man! Nice to see he's taking care of you. How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 1 million subscribers and we have over 140 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer a couple of years ago, I got interested in car detailing just as a hobby for fun to wash our cars. Last year after I got the ioniq 5 matte I searched for a matte paint guide and your videos were spot on. Besides that we live in the same city 😊. I bought all my tools and chemicals upon your recommendation. And I am happy with the results. I can’t wash the car in the garage so winter is challenging for matte paint under the Tempo :(
Love you pan. Thank you for your guidance man your videos helped me make the best decisions pertaining to my business. I have this mjjc foam cannon too, its amazing.
Thanks for the positive feedback!
Hey Pan, awesome video. I was about to ask which one you like best and than saw that you said MTM. Would love to see an updated Foam Cannon Showdown. Keep up the great work Thanks
Thanks!
Another awesome video pan I've been using the mjjc pro2 for over a year and it is absolutely the best foam Cannon you can buy. I use it with my active 2.0 pressure washer it is absolutely amazing. I like to use 3 oz of Meguiars hyper wash and an 1 oz of purple Power.
Thanks for sharing your experience!
Thanx for another great video. Does the s hold the same amount of liquid as the pro or is it smaller capacity
Slightly less capacity compared to the Pro, but barely noticeable.
Hey Pan, thanks for the video. Tuning in from Australia and noticed you don’t have links for us down under.
Would love to try some of the products you showcase.
Unfortunately, I’m limited by the amount of text I can put in the video description, and it would be impossible for me to research links for all countries my subscribers come from.
It would be great to have a video of the best foam cannon by price range because even the Griots is 88$ CAD right now
th-cam.com/video/wF5pDPE7vr0/w-d-xo.htmlsi=K6wt4gOZ2nXjNztu
Waouhhh on est synchro la mienne est programmé pour dimanche mjjc s v3 vs v2 pro 😉😉😉
NV Storm. I just got that along with my MTM. I would like to see you check out the NV line.
off topick.. i just was thinking i have never sayed thank you for your's grate videos to me learning my self to clean and detailing cars, so thank you pan :)
Great to hear! Thanks for the positive feedback. Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Thank you for your next great video. BTW you can measure diameter with digital calliper - it will be more accurate and result will be easier to present in videos.
A general idea is enough, doesn't really matter 😂
Pan, as he said himself in different videos, is trying to make as best videos as possible. My advice was just about how he can make another improvement step.
I can use detergents or touchless materials that are used in car washes
Hi Pan, great video as always. Would you recommend either of these over the mtm?
I still prefer my MTM but both MJJC foam cannons are excellent.
Thank you Pan, Will be trying my newly purchased MTM. thanks for the advice.
Hi Pan, I saw that in some of your previous videos, you use brake buster in a foam cannon, while in other videos, you put it in IK foam pro 2. Do you have a preference? Which one do you use in your maintenance wash?
Foam cannon as it’s more efficient.
great video. However you should've tried them with a shampoo that does not really foam good to really see their ability to aerate the shampoo.
Another awesome episode of Paaannn the Organizer.
😁👍🏻👍🏻
Mine's in the mail... can't wait.
Enjoy! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
I have a Mach E GT. Should I wash my car the same way I would wash an ICE? For example, I use one peddle drive so there’s very little beak dust. Do you clean the wheels the same as an ICE car?
Friends, please guide me in detail, is the 1.25 nozzle suitable for devices with a working pressure of 180 bar and does it work well, or should I use the 1.35 nozzle?
Hi Pan,
I recently bought a Karcher K7 compact and after that I had a problem with the quality of the foam. I thought my MTM PF22.2 was wrong, but the same thing happened with the MJJC S V 30 even though I changed all the recommended nozzles. After that, both MTM and MJJC worked perfectly fine on the Karcher K 4. What is the problem here? Thank you
Hard to say as I'm not there to observe potential issues. A K7 should give equal or better performance to a K4 pressure washer. We don't have the K7 in North America though. Perhaps try contacting Karcher to see if you have a faulty unit?
There are many factors that influence the quantity, thickness and richness of snow foam:
1. Type of foam cannon (smaller orifices lead to thicker foam, but can potentially trip your circuit breaker depending on your setup)
2. Type of pressure washer (a higher amount of GPM water output leads to more foam, so a pressure washer with 1.3 GPM will produce less foam than one that pumps out 2.1 GPM)
3. Type of snow foam (not all snow foams produce the same amount of foam)
4. Dilution ratio of snow foam (adjust the dilution according to your setup. Start with the recommendations on the label, and increase the amount as needed).
5. Water quality. The better the water, the more foam and suds you get. So deionized water will always produce more foam compared to hard tap water, for example.
Another great video. I really look forward to the next one.
Glad to hear it!
I have the pro 2.0 and was wondering what parts will eventually need replacing (filters, suction tube, etc) and if you ever had to change any of these? Thank you!
If you don't have issues, you don't have to replace anything. I haven't had the need to service mine since I got it. But I also take care of it. When I am done using it, I empty the container, rinse it out, fill it with warm water, run it through the foam cannon/pressure washer setup for 30 seconds, which flushes any soapy residue, let it air dry and it's ready for next time.
See how I do it in a video where I show how to clean detailing tools and equipment: th-cam.com/video/6uFdYBqbT2Y/w-d-xo.htmlsi=BECrf_t7eh221jR9
@@PanTheOrganizer thank you very much! I’ve been just running it thru the pressure washer empty once it’s out of foam but since watching your video, I will now refill the cannon back up with warm water and then run it. Hopefully I didn’t already do any damage
I bought the 3.0 and the bottom cracked in less than two weeks. I’m in Miami so it’s hot and I think the material is too brittle.
Of course there is no difference. As you said the operating parts are the same. Only difference in making the choice is the bottle and straw differences
The O-ring for my MJJC S V3.0 broke. Please have them sell that individual part.
Great video, I love the tips you gave for the general use of foam canon. On an other subject following 2023 awards, i would love if you could add a cotegorie in tire shine and split gloss finish tire shine mate finish. I left you a comment detailling my tought on the award video, but i m not too surprise if you didn t see it, you had so many comment on that video. Good job pan keep the good work.
Thanks I appreciate it!
based on Pan's recommendation, I bought the MJJC foam cannon from Walmart's website. wow.... it's the best foam cannon every. In fact, my neighbors always watch me turn my cars into snow white cars... :) The only problem that I'm wondering is the coming winter. if it's below freezing outside, can I still use the foam cannon to wash the car?
I wouldn’t recommend washing your car in freezing conditions.
Question for you sir I have the mjjc pro and I'm using a Sunjoe spx3000 with 1.76 psi and the foam Canon just start acting up lately it's not spitting out foam is there any way that I can fix it or should I just order another one of them small pieces to put in the cannon part
I’ll end up getting one of these for next years car wash season
👍🏻
Fantastic and detailed video as usual Pan. Thanks from Australia.
Thanks for watching!
I have both of these foam cannons and they both work great!
Yup!
It seems a good product. Have you tried those 'coloured' snow foams?
We don’t have them in Canada yet.
Hello everyone! How do you guys think is it safe for the mjjc sv3 foam cannon to use APC as a pre rinse and if safe then at what approximate dilution?
I had no idea that these foam cannon’s run around $80+ I think I’ll invest as I have just started my mobile detailing
I think the pro version 2.0 was around $60 when it came out
Welcome to my channel. You discovered one of the biggest car detailing channels on TH-cam as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@@pantac4493oh ok. Inflation has taken place 😂
Hi pan
Should i straighten/retract the car wiper and clean it?
Because i saw many videos of car washing dosent even clean the rubber side of the wiper
Here's my video on cleaning wipers: th-cam.com/video/eB5NtttIkPE/w-d-xo.htmlsi=-MihLmoimUdBehPJ
Any time you are looking for a topic, I most likely have a video on it. Here, you could have searched for "how to clean wipers Pan The Organizer" and you would have found my video.
What are the best foam cannons for the Karcher 4 high pressure? Thanks Pan
I don’t understand your question.
i currently have the mtm but dont like the bottle and metal to plastic so im stuck between the mjjc pro and the griots what you prefer? Thanks.
Overall build quality, the Griot's. But the MJJC is a close second, less expensive, and a bit more foam.
The Griots one works great. Too bad the metal ball rust really badly. I’m getting rid of it for that reason.
I never had such issues. And does the rust affect your solution?
Does it work with all types of 180 pressure devices?
Pan quick question I recently saw a video where the guy was saying you don’t want a heavy foam that you want the foam to be more running allowing the dirt to roll off. What’s your take on it. I had a cheap Amazon cannon & didn’t get all that much foam but now I bought the Boss Griots Garage which is giving me insane foam. Thanks
That’s like those who prefer rinsing before foaming or foaming on dry, etc
There isn’t one right or wrong here it often boils down to personal preference. Some people prefer runnier foam and some prefer that shaving cream thick foam.
For me, the more important thing is getting a quality product. I don’t mind if it’s runnier (like Bilt Hamber Touch-Less) or thicker (like DIY Detail Incredible Suds). Both are excellent for different reasons.
Kinda curious on why some foam cannons don't foam so good. I bought one from what I thought was a good company,paid almost $100 Canadian dollars for it and no matter what soap or what settings I try I never get thick foam. My pressure washer is rated at 1800 psi and 2.1 per minute.
Not all foam cannons are created equal. Which one did you buy?
Also, there are many factors that influence the quantity, thickness and richness of snow foam:
1. Type of foam cannon (smaller orifices lead to thicker foam, but can potentially trip your circuit breaker depending on your setup)
2. Type of pressure washer (a higher amount of GPM water output leads to more foam, so a pressure washer with 1.3 GPM will produce less foam than one that pumps out 2.1 GPM)
3. Type of snow foam (not all snow foams produce the same amount of foam)
4. Dilution ratio of snow foam (adjust the dilution according to your setup. Start with the recommendations on the label, and increase the amount as needed).
5. Water quality. The better the water, the more foam and suds you get. So deionized water will always produce more foam compared to hard tap water, for example.
@@PanTheOrganizer I bought the Autoglym foam cannon, pressure washer puts out 1800 psi and 2.1 GPM. I have tried most soaps on the market, incredible suds,Adams mega foam,chem.guys the only way I can get thick foam is to double or triple what they say to add.
A side note,I do have very hard water. That's the only thing I can think of.
Awesome video and product review/comparison good friend
Thanks Richard! Always nice to see you as a regular viewer. I hope you’ll have a great day!
Hey Pan, love you videos! I just got a brand new car and I noticed there are tiny water spots on the glass and it starts to annoy me when the sun hits it just right. I was thinking about buying invisible glass: glass stripper and soft 99: glaco ultra for the windshield. Should I use a glass stripper this early on a new car or would that destroy any of the current protection on the glass?
No problem as most dealerships don't apply any sort of protection, just make sure you do it correctly and correct application. Pan has more than 1 video on how to do it 😄
Yes you can use the glass stripper right away, you can even machine polish the glass too if the stripper isn’t enough.
And you actually want to remove any cheap protection that might be on the windshield anyways, so the Ultra Glaco can have the best bond to the glass.
I have a Kranzle 1322TSS. I had an MJJC foam cannon pro v2 which lasted a long time and started shooting soap water. So I changed the filter and clean the weighted filter ball in the foam cannon as well. Still soapy water. So I bought a brand new MJJC FOAM CANNON PRO V2 and still the same thing. When I tried using my MTM PF22.2 it works fine and gives nice foam. Why do you think both the older and new MJJC foam cannon pro v2 are giving soap water? Any advice appreciated! Pressure seems good when using all the foam cannon but with the MJJC seems like it has less flow of water for some reason. I could be wrong but that’s what it seems like. The dial to control the amount of foam is turned all the way to max foam so idk what else to do? Should I buy the new MJJC foam cannon S v3 and try that or should I stay away from MJJC foam cannons now? MJJC foam cannons are my favorite so I would hate to change to a different brand. Please help! Thank you!
Il parait qu'une prochaine version du pro en V3.0 est en cours.
Bien le bonjour de Belgique Pan.
Oui ça fait plus de six mois que j’entends cette rumeur hehe
Is there a recommendation for something like the Active 2.0? Seems like the GPM is there but maybe the pressure isn't optimal for something like this?
For washing cars, you want 1000 to 2000 psi max. Don’t go over 2000 psi. What we look for is the highest water flow rating (gpm). 1.3 gpm being on the low end and 2.0 gpm being on the awesome end.
See my video on different pressure washer recommendations at different price points here: th-cam.com/video/_UwK_0VDK0o/w-d-xo.htmlsi=MVRkpFHgNbmGqW36
Hey pan! Have just gone through a lot of your videos and purchased a lot of your recommendations - I was going to buy the eFoam pro but realized its $250 I mostly wanted it just to apply the brake buster you recommended. I have two spare foam cannons am I able to just use those instead of the eFoam pro I would just normally spray it but its not as cool looking and satisfying as what it looks like in your videos hahaha. Do you have any other eFoam recommendations?
th-cam.com/video/esARO5ArBX0/w-d-xo.htmlsi=bZ9CJgilziMQyCIo
I like the new one but not at that price point. As always great info Pan
Thanks!