2019 Royal Enfield Continental GT 650 // Bar End Mirrors Installation
ฝัง
- เผยแพร่เมื่อ 2 ก.ย. 2019
- It's time to strip some weight from my 2019 Royal Enfield Continental GT 650, so let's remove the plastic stock mirrors and replace them with a pair of CRG Black Hindsight Lane Splitter
MY GEAR:
www.amazon.com/shop/berlinbiker
LETS CONNECT ON SOCIAL MEDIA:
Instagram: / jbburtoni2
Instagram: / theberlinbiker
Twitter: / jbburtoni2
Twitter: / theberlinbiker
#RoyalEnfield #ContinentalGT #GT650 #Motorcycle
Thank you for watching! If you have not already subscribed, here is an entire playlist devoted to my 2019 Royal Enfield Continental GT 650:
Use a vice grip to hold the bar end caps in place then while holding on use a hex key to rotate the screw. The end caps will come off with ease. This way you avoid taking the entire inside rod out.
The reason why it was meaty when you pulled out is because they put some weight so it will decrease the handlebar vibration.
There's an easier way to do it, just take the mirror apart, the mirror bracket comes apart, unscrew the two bolts and the bracket separates in half, put it on bar, then put the mirror ball back in its socket and screw the brackets together again. Much easier than going through all the work to remove the bar end.
I have been struggling with the same issue and this video is the only legit video. Not sure how it's a cake walk for most of the other video's who are not showing the struggle or the the way they did it. I am gonna try more if not then probably will try during my service.
I had the same issue so then I downloaded the service manual and they made it look simple. Wasn't working for me until I held the end cap then gave the bolt a little twist. Using a rag and vise grip to hold it still.
thank you so much for this this help me a lot! cheers mate!
Do you suggest a change on the bar grips or should I stick with the stock?
Makes it look so much more sporty!
Hey Hey, thanks for the video and the effort you put into your channel. Can I suggest making an update to this video? The bar ends are pretty easy to get off without a screwdriver and hammer. Simply push the bar end in towards the gas tank then use a Hex key to remove. There is a small lip on the bar end that needs to catch the end weight piece.
Wait some makes the mirror go above the bar like on top, and yours are below?
Hi,Did you put any CRG BILLET Adapter ?cause while ordering mirrors it showing we need those adapter .
Hey man, love your videos. I just bought a GT and experiencing the same problem with the bar ends. At the point where I’m considering putting off DIY bar ends until the 500km service and getting the Royal Enfield mechanic to do it!
Cool, well done that man!
@Burtonini Motors
I was thinking abt doing it same, please let me know and also can you find out if there is a DB killer on the stock exhaust, thank you bro
Thanks mayn, just picked up mine today and gonna do this tomorrow with a set from my last bike. Can't you just undo the mirrors completely and clip em over without bothering to pull the tube?
How do they work? I am referring to visibility and vibrations.
"I'm a bit scared of putting this in right now..."
CRG Mirrors are they comes in SET left and right??