Bar End Mirror Install on Royal Enfield Motorcycle
ฝัง
- เผยแพร่เมื่อ 3 มิ.ย. 2022
- How to install bar end mirrors. In this video show you in under 5 minutes how to quickly and easily install bar end mirrors on a Royal Enfield Continental GT 650. The whole process should only take 10-15 minutes to complete from start to finish.
Bar End Mirrors for interceptor & Continental: ebay.us/gcTVeY
Bar End Mirrors for Meteor, Hunter & Classic 350: ebay.us/xOEUoq
Royal Enfield Bar End Finisher Caps ebay.us/MLnewv
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
---
Website: ride.withjerry.com
Instagram: / ride.withjerry
Facebook: / ridewithjerry
Twitter: / ridewithjerry - ยานยนต์และพาหนะ
At 2.53 similar to the tools, used Vice grips and 5 Allen key to remove. I’m unable to do it, however the chrome cover still moves with the Allen key, used Vicegrips to hold it.
how you do this with de mirror? teach me pliss?
thanks, man
I replaced my RE bar end ends with smaller CNG mirrors. Lower with much better visibility around your body and look cooler too.
I agree... a couple months ago I replaced these bar end mirrors in the video with smaller CRG lanesplitter bar end mirrors. They look better and I like how they fold in when I park my motorcycle in tight spots in teh garage.
@@RideWithJerry I'm buying the rear end chop kit. Thanks for such a good video! I will also put signal lights at the top of the rear shocks.
I would really love to see how it looks with the bar end mirrors downwards instead of upwards.
Yes, I think they look better down (especially if you have lowered, clip-on bars) but haven't switched yet. I'm curious if you get the same visibility or if your hand/arms get in the way... I'll have to switch and test it out.
@@RideWithJerry As long as it doesn't scratch the tank it's all good.
Are these the stock handle bars/grips? Or are they aftermarket? I want to know if I can use these mirrors on a stock setup. Thanks
The bars/grips are stock.
Hi, can you share a link to buy these rearview mirrors ?
I got the mirrors on eBay www.ebay.com/itm/383868771695
Hey there!
Any idea how to remove the bar end inserts? I have a Hunter 350 and ordered bar end mirrors without looking at the bar end plugs first, and now I am bit panicking that I have to drill them out, as I don't seem to find a way to remove them easily.
Not sure about the 350, but on the 650, if you take off the grips you will find a hole with a tab you need to press to slide out the bar end inserts.
@@RideWithJerry I ended up simply using a longer bolt and attaching the new mirror with that to the factory insert. Thanks for the info though, will check it out!
This is for a Euro 4 bike fitting as the Euro 5 end caps are different and don't spin. The RE adaptors still have to be modified to fit properly as RE were to lazy to do.
I’m curious if the Euro 5 bar end insert has a larger diameter bolt. I bought finisher end caps and the provided bolt is too big.
Can you post a video on Euro 5 end caps ?
Hey mate, where did you find plug caps? Cheers!
Bought them off eBay ebay.us/MLnewv
@@RideWithJerry Cheers mate!
How do you get the Allen bolts out cause on my gt650 they’re in there good and it destroyed my Allen key so I can’t even use it anymore
Getting the end caps off seems to be a common issue!
@@RideWithJerry have you had any luck getting it off
@@darrenwilliams3398 Yes... in the video I show how I took them off. Held the endcap with plyers so it doesn't spin and then unscrewed the bolt. If you want to remove the entire bar inside the handlebars, you have to take off the grips. There is a pin under the grips you need to press to release.
Pls help me about diameter of the glass. I want assembly with Royal Enfield classic 350 :(
Check the bars on your Classic 350, I think the mirros are different than on the Continental. These have caps that screw into the bar end rather than slip over the bars: ebay.us/xOEUoq
@@RideWithJerry i checked, and its can assembly with my classic 350. But i dont know diameter smaller than base mirror :(
where did you get the plug caps?
Got them on eBay www.ebay.com/itm/393386181747
Mine is 2023.Ebay says only until 2020.But i think OEM mirrows are the same even in 2023 so hope the plug will fit.Great Video Jerry @@RideWithJerry
Plug cap size ?
Not sure the size. I bought the plug caps off eBay, maybe there is more info there ebay.us/MLnewv
Don't understand mine has these 2 metal caps inside the mirror hoop. Look like caps.
It appears that the bar end mirriors for the Meteor/Hunter are different than the Interceptor/Continental and has the caps so you screw it into the end of the bars instead of over the bar.
Are ends of the int and cont bars the same?
My INT650 bars don't look like that
Yours may be different (this is on the Continental.) Some have an extenstion that you screw into the end of the bar that you attach the mirror to.
Show
Can you please give away these mirrors 🥺
Approx what size are those vice grips?
Nothing special, I think they are just the 7-inch grips.