HOW TO REPLACE A WATER INLET VALVE ON A WASHING MACHINE W11101906
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- Donate if this video helped you paypal.me/appl...
Water inlet Valve purchase: amzn.to/3lE3JqE
Installing a water inlet valve on a Whirlpool washer can be done following these steps:
Turn off the power to the washer and unplug it from the electrical outlet.
Shut off the water supply to the washer by turning off the valve that controls the water flow to the washer.
Remove the old water inlet valve by disconnecting the water supply hoses from the back of the washer and unscrewing the mounting screws that secure the valve to the washer. Be sure to also disconnect the electrical wires from the old valve.
Install the new water inlet valve by first reconnecting the electrical wires to the appropriate terminals on the new valve.
Connect the water supply hoses to the appropriate ports on the new valve, making sure to tighten the hose connections securely.
Secure the new valve to the washer using the mounting screws provided.
Turn on the water supply valve and check for any leaks around the hose connections.
Plug the washer back in and restore power to the washer.
Test the washer to make sure that the new water inlet valve is functioning properly.
thx chief ... just what I needed to get the valve assembly removed.
Thank you for this helpful video. I was able to repair my machine, exactly how you instructed, and it only cost me $24.99. (Well, and another $3.99 for the T20 :-). I had been using a garden hose to fill my machine for over a month now, and it was so rewarding when she started flowing properly, again. Many thanks!
Thanks for making the effort to do two views!
Good info. You just saved me a lot of money Thanks
Glad I could help
Thank you so much, very clear and concise 😊.
Glad it was helpful!
THANK YOU SO MUCH!!! YOU COMPLETELY HELPED ME!!!
Very helpful. Thank you.
Do you just push the inlet valve into the "hole" of the cabinet ? What does the connection between the new replacement inlet valve and the washing machine look like ? How does it seal/snap together to make sure there is no leak ?
3:55 The first thing you do is slide the inlet valve opposite of the red and blue side into the square hole line the holes up to screw the metal screws to mount then push the red and blue threaded pieces into the 2 large holes. now screw the metal screws into the inlet to mount the valve.
Great video but my washer model # is WTW4816FW2 your link is for Model # WTW4816FW3. Will this fit in mine or do you have a link to one that will please?
amzn.to/3ORkTgg
Thank you.