I never knew that cable had such a long reach. That looked pretty cool Dave. And that thing can handle a pretty big log too. I really enjoyed this vid. Beautiful day, scenery too. Good job men!
Good morning Joe and thanks! It has performed very well for us so far, the large diameter capacity is really nice for accepting the odd shaped and larger firewood poles! I’m glad you enjoyed it, thanks for watching! Take care my friend
Thanks brother! It sure does allow a guy or two to make alot of wood quick! Yes the chainsaw factor is nice, helps cut down on cost and allows for simpler maintenance if something were to go wrong. I sure appreciate ya watching, have a good weekend!
Thanks Dave and Dave and Mrs. Dave for sharing with us. Those Wallenstein products are great looking and great working tools. Well thought out products. You’ll have lots of fun with that set up. Thanks for sharing with us, Fred. 🙏🏻🙏🏻👍🏻👍🏻👏🏻👏🏻✋🏻✋🏻
Thanks for watching Fred! It sure is a well built machine, makes processing firewood a breeze! I’ll be sure to bring you all along in more videos of it in action. Take care!!
Nice demo. I have a Milwaukee 6 ft tape on a keychain hanging on my belt. I don't even disconnect it, just pull the end out to make those 22 or 24 inch measurements. Happy New Year 🎉
Nice video Dave! Me and mom did 5 more loads today! I really like this processor, now I'm running a 29" bar it's cutting threw all the logs now!! She's a BEAST 💪👍
Thanks! That’s awesome, I know it sure will make firewood season much more enjoyable on the log handling side :) I’m glad your getting it dialed in, sure is a great machine!
Definitely! The new bar is a perfect fit, you know it's amazing the splitting power on the processor only one split it came off of auto cycle, held the levers down for a couple of seconds that's all it needed!! So happy ☺
Now you’re making firewood! That looks like an awesome machine Dave. I think the best part of that machine is you are not working off the ground. I hold my logs up with forks when I’m cutting so I’m not bent over all day, but I still have to roll them on the lift with the Wolf Ridge.Great machine! Looking forward to more action. Great video and thanks for sharing! Stay safe , have fun and be cool 😎
Thanks for watching Dave! Yes I couldn’t believe the relief of my back after three loads, it’s not perfect but man is it pretty slick! I’ll be sure to have more action of it soon. Hope you enjoy your weekend, take care!
Thanks Kevin! It is very powerful and fast too, really increases your reach on where to park the processor. I’ll be getting more action out on this soon, have a good weekend buddy!
Hey! Your right about that, in comparison to others this unit is very feasible and has an awesome log capacity! I sure appreciate ya watching and commenting, take care!
That's awesome! Even with the knots and limb excess hanging up from time to time, I will definitely check one of these splitters out. You guys take care and stay safe out there.
Awesome !! Good to see it’s working out like you guys had hoped !! Mine has made my business a lot better then the days when I hand bucked then carried the logs to the splitter
Awesome machine Dave. That Wallenstein looks to be a great firewood processor. Man, you stock pile firewood now buddy. I'm just getting back from vacation and gotta lot catching up to do on TH-cam notifications.
Thanks Dean! It is built very well and came at a great price in comparison to other processors. Firewood got a lot easier for us this season :) I hope you had a great vacation! Take care buddy
Thanks Dave! Haha yes we will strap it up one day and see how she rips 🤠. Your right much easier, three loads in an hour or so! Sure was sweet. Thanks for watching buddy, take care
@@OhioHillTopsHobbyFarm That saw will run a 36" bar very good. Might save the adjustment problem too! Take care guys, save some firewood for the rest of us!!
Wheewww man! I need a bigger bar hehe I have a 28” on it now and I’m sure it would still pull nice on a 36”. Might look into doing some big slabs with it on an Alaskan mill setup!
Was wondering today how well this processor would work on the 8ft logs the loggers around here do for firewood and pulpwood logs. Be a lot easier if had someone to run the winch cable around for me so I could keep the processor humming along.
Yes the longer the firewood poles the more cord/hour you can do but it still works great on the shorter length logs. Having 2 people really allow this processor to shine. For price/production output, this machine is hard to beat! Thanks for watching.
Very cool!! Im thinking about getting one. I have a couple questions. How much fuel does it use roughly per hour and do you feel the winch has enough power? I was looking at doing tree length wood with it. Thankyou
Honestly I can’t give you a fuel usage with it, I’ll just say for the Size of the tank you can do a lot of firewood with it. And the winch has plenty of power, my best advice is when you stage the logs take the time up front to cut the limbs and knots flush. It just makes the rest of the operation much better. Overall this machine is awesome and in my opinion compared to other commercial splitters it’s way more bang for the buck! Hope that helps and thanks for watching. Follow our channel for more firewood videos, the season is coming up on us! Take care James
Why did you choose the Wallenstein over the Hudson Brute Jr that has a log lift for just a bit more $? The ramped outfeed chute acts almost like a conveyor! Also, why the 845 instead of the 875 that has the hydraulic saw? Is it for ease of service of a conventional chainsaw versus a hydraulic saw? My thinking is if the saw you are using dies, can more readily fix it than wait for hydraulic saw parts. I wouldn't use anything less than a 70cc class chainsaw on this processor. Am thinking this model might be the way to go for me. The better option to increase production is to get a splitter with a proper 4-way wedge. That alone would nearly triple my production volume.
Both units are excellent choices, mainly I choose the WP 845 my dealer is about 6 miles from me and it is available, most items are backordered or not available, Thanks for the comment also the 361 is doing a great job no doubt a bigger saw would be faster👍
Thank you Mirek! This processor has been a lot of fun so far and really helped our production. I’ve recently have gotten an Echo 620 and it’s been an awesome saw so far! I sure appreciate ya watching and commenting, take care!
You'll love the machine more once you do tree length. I own a older wp830 and got 90' of synthetic cable in my winch. Can drag 60 to 80' long trees no problem. Got a couple videos on my channel you can watch. And get a 70cc or bigger saw, and put 404 pitch bar and chain on like my 441c has and sharp edge will last longer between sharpenings.
Thanks for the tips Rod! Yes once we start gathering new firewood poles that’s what we are gonna shoot for. It is definitely an awesome machine, really looking forward to running more wood through it. I’ll check out your videos, thanks!
I feel one person could easily do 1.5-2 face cord and hour if the logs are staged and prepped right, that’s if your just letting the wood fall in a trailer or pile! I’ll try to do a video of that soon to find out, kind of curious myself. Thanks for watching!
Shot Boyz I have one in New Zealand , find its unreal especially on farm so mobile tow it just with my trx 500 four wheeler . 62 m3 is my biggest day so far 14 hours solo
A more powerful saw with a aggressive chain and some practice time too figure it all out that machine would be scary what you could do with it . Pretty impressive already . 👍👍 👍👍
After using the 835 going back to 2016 it doesn’t look like they have done much modification.not that it needs any! Unbelievable how much wood you can process in 8-10 hrs! Make sure you upsize you saw gas and oil cans!
I never knew that cable had such a long reach. That looked pretty cool Dave. And that thing can handle a pretty big log too. I really enjoyed this vid. Beautiful day, scenery too. Good job men!
Good morning Joe and thanks! It has performed very well for us so far, the large diameter capacity is really nice for accepting the odd shaped and larger firewood poles! I’m glad you enjoyed it, thanks for watching! Take care my friend
That processor is no joke! I like the fact it uses a chainsaw.
Thanks brother! It sure does allow a guy or two to make alot of wood quick! Yes the chainsaw factor is nice, helps cut down on cost and allows for simpler maintenance if something were to go wrong. I sure appreciate ya watching, have a good weekend!
You and your dad sure are making firewood days a lot of fun ❤️🔥🪵
Ohhh yeahh haha, this machine could bring a smile to anyone’s face! Sure made quick work of 3 loads of wood :)
Dad and I did 5 loads today 🔥🪵
Super and simple.. we need that machine here in the U.K...👍🤠
Yes this processor is great, those are the very reasons we bought it! Thanks for watching
Thanks Dave and Dave and Mrs. Dave for sharing with us. Those Wallenstein products are great looking and great working tools. Well thought out products. You’ll have lots of fun with that set up. Thanks for sharing with us, Fred. 🙏🏻🙏🏻👍🏻👍🏻👏🏻👏🏻✋🏻✋🏻
Mrs.Dave Fred you made my day! Lol she'll love that 👍
Thanks for watching Fred! It sure is a well built machine, makes processing firewood a breeze! I’ll be sure to bring you all along in more videos of it in action. Take care!!
Ol Dave is having way too much fun haha!
Haha man I tell ya he’s gonna get a ton of use from this machine! We had a fun evening on it, can’t wait for more :) thanks for watching buddy! 🤠
Nice demo. I have a Milwaukee 6 ft tape on a keychain hanging on my belt. I don't even disconnect it, just pull the end out to make those 22 or 24 inch measurements. Happy New Year 🎉
Thanks! I appreciate ya watching. That sounds like a good idea, quick and easy. Take care, Happy New year!
Nice video Dave! Me and mom did 5 more loads today! I really like this processor, now I'm running a 29" bar it's cutting threw all the logs now!! She's a BEAST 💪👍
Thanks! That’s awesome, I know it sure will make firewood season much more enjoyable on the log handling side :) I’m glad your getting it dialed in, sure is a great machine!
How was the new bar working out for ya, I bet it really helped! We need to make a plan for me to come out and help haul in more firewood poles!
Definitely! The new bar is a perfect fit, you know it's amazing the splitting power on the processor only one split it came off of auto cycle, held the levers down for a couple of seconds that's all it needed!! So happy ☺
That’s awesome, I know when I was running it there wasn’t a piece it didn’t bust. Pretty wicked! We’re you guys using the log tongs today?
Yes!!! Definitely made bring the logs in a lot easier!
Nice processor Dave. You and dad have fun.
Thanks Mark! It sure is a savior to the back, made quick work of three loads! I’ll be getting more videos out as we keep playing. Take care buddy!
Now you’re making firewood! That looks like an awesome machine Dave. I think the best part of that machine is you are not working off the ground. I hold my logs up with forks when I’m cutting so I’m not bent over all day, but I still have to roll them on the lift with the Wolf Ridge.Great machine! Looking forward to more action. Great video and thanks for sharing! Stay safe , have fun and be cool 😎
Thanks for watching Dave! Yes I couldn’t believe the relief of my back after three loads, it’s not perfect but man is it pretty slick! I’ll be sure to have more action of it soon. Hope you enjoy your weekend, take care!
That’s Awesome. I’m really liking the wench on it. Can’t wait for future videos with new processor. 👍🏼
Thanks Kevin! It is very powerful and fast too, really increases your reach on where to park the processor. I’ll be getting more action out on this soon, have a good weekend buddy!
makin hay while the sun shines lookin good guys stay safe the SR.
First saw it on the Outdoor channel and think it is awesome! This is as far as you get, without having a full on big processor!
For sure! Truly no other equipment needed👍
Your right! And this will handle much larger logs than most at a half the cost or better!
Great video Dave.
Thanks Ken! It made for a fun evening of firewood :)
Hi Dave, I like that the unit is very simple to operate and you don't need to take out a mortgage to buy it...God Bless...Chief...{NYS/ADK}
Hey! Your right about that, in comparison to others this unit is very feasible and has an awesome log capacity! I sure appreciate ya watching and commenting, take care!
Looks like a neat machine that will make firewood fun!
Thank ya buddy, it sure has helped :) I’ve always enjoyed firewood but not there is definitely a whole lot less effort going towards it!
Hi Paul! The WP 845 is working great, I like your setup to buddy👍👍
@@daveholmes123 thanks!
Congratulations that's a great purchase
Thanks Gary! It has really changed our firewood season for us, now it’s that much more enjoyable. I appreciate ya watching and commenting! Take care
Absolutely perfect wood processing
Thanks Tom! I tell ya that thing made firewood that much more enjoyable 🤠. I sure appreciate ya watching, take care!
Wow! That looks like so much fun! 👍💪🔥🚜
Thanks CJ! It sure was a blast, made quick work of a lot of wood!
That's awesome! Even with the knots and limb excess hanging up from time to time, I will definitely check one of these splitters out. You guys take care and stay safe out there.
Hey Thanks DJ! It sure made quick easy work of getting 3 loads of wood in 🤠 I appreciate ya watching and commenting! Take care
Awesome !! Good to see it’s working out like you guys had hoped !! Mine has made my business a lot better then the days when I hand bucked then carried the logs to the splitter
No doubt Zack! It has definitely removed a lot of the work factor. 👍
Awesome machine Dave. That Wallenstein looks to be a great firewood processor. Man, you stock pile firewood now buddy. I'm just getting back from vacation and gotta lot catching up to do on TH-cam notifications.
Thanks Dean! It is built very well and came at a great price in comparison to other processors. Firewood got a lot easier for us this season :) I hope you had a great vacation! Take care buddy
You need to put that Dolmar on that thing Dave! Nice unit you have there, it's definitely gonna make life easier with those boilers you have!
Thanks Dave! Haha yes we will strap it up one day and see how she rips 🤠. Your right much easier, three loads in an hour or so! Sure was sweet. Thanks for watching buddy, take care
@@OhioHillTopsHobbyFarm That saw will run a 36" bar very good. Might save the adjustment problem too! Take care guys, save some firewood for the rest of us!!
Wheewww man! I need a bigger bar hehe I have a 28” on it now and I’m sure it would still pull nice on a 36”. Might look into doing some big slabs with it on an Alaskan mill setup!
@@OhioHillTopsHobbyFarm, seriously? A 36in bar on the 361? That is severely underpowered.
@@thefirewooddoctor The Dolmar, not the Stihl.
That thing is neat!!!
It sure is! It has just made firewood season that much better :) thanks for watching!!
Very cool my friend
Thank ya buddy! It can make up a load of wood quick :) take care!
Was wondering today how well this processor would work on the 8ft logs the loggers around here do for firewood and pulpwood logs. Be a lot easier if had someone to run the winch cable around for me so I could keep the processor humming along.
Yes the longer the firewood poles the more cord/hour you can do but it still works great on the shorter length logs. Having 2 people really allow this processor to shine. For price/production output, this machine is hard to beat! Thanks for watching.
Very cool!! Im thinking about getting one. I have a couple questions. How much fuel does it use roughly per hour and do you feel the winch has enough power? I was looking at doing tree length wood with it. Thankyou
Honestly I can’t give you a fuel usage with it, I’ll just say for the Size of the tank you can do a lot of firewood with it. And the winch has plenty of power, my best advice is when you stage the logs take the time up front to cut the limbs and knots flush. It just makes the rest of the operation much better. Overall this machine is awesome and in my opinion compared to other commercial splitters it’s way more bang for the buck! Hope that helps and thanks for watching. Follow our channel for more firewood videos, the season is coming up on us! Take care James
Thankyou for the info!! Just found your channel! You guys put out great videos! I'll stay tuned! 😊
Have you tried cutting the slabs off the sawmill with it?
Why did you choose the Wallenstein over the Hudson Brute Jr that has a log lift for just a bit more $? The ramped outfeed chute acts almost like a conveyor! Also, why the 845 instead of the 875 that has the hydraulic saw? Is it for ease of service of a conventional chainsaw versus a hydraulic saw? My thinking is if the saw you are using dies, can more readily fix it than wait for hydraulic saw parts. I wouldn't use anything less than a 70cc class chainsaw on this processor. Am thinking this model might be the way to go for me. The better option to increase production is to get a splitter with a proper 4-way wedge. That alone would nearly triple my production volume.
Both units are excellent choices, mainly I choose the WP 845 my dealer is about 6 miles from me and it is available, most items are backordered or not available, Thanks for the comment also the 361 is doing a great job no doubt a bigger saw would be faster👍
Great video👍own Echo 621 SX is my job , ad is doing well Mirek B.🌲
Thank you Mirek! This processor has been a lot of fun so far and really helped our production. I’ve recently have gotten an Echo 620 and it’s been an awesome saw so far! I sure appreciate ya watching and commenting, take care!
@@OhioHillTopsHobbyFarm Thanks 😀🖐
Cheers, good one.
Thank you, I sure appreciate ya watching and commenting!
You'll love the machine more once you do tree length. I own a older wp830 and got 90' of synthetic cable in my winch. Can drag 60 to 80' long trees no problem. Got a couple videos on my channel you can watch. And get a 70cc or bigger saw, and put 404 pitch bar and chain on like my 441c has and sharp edge will last longer between sharpenings.
Thanks for the tips Rod! Yes once we start gathering new firewood poles that’s what we are gonna shoot for. It is definitely an awesome machine, really looking forward to running more wood through it. I’ll check out your videos, thanks!
Any idea roughly how many face cord a person could do in a day?
I feel one person could easily do 1.5-2 face cord and hour if the logs are staged and prepped right, that’s if your just letting the wood fall in a trailer or pile! I’ll try to do a video of that soon to find out, kind of curious myself. Thanks for watching!
Shot Boyz I have one in New Zealand , find its unreal especially on farm so mobile tow it just with my trx 500 four wheeler . 62 m3 is my biggest day so far 14 hours solo
Awesome! Thanks for the feedback, I know having this machine is a game changer. We really enjoy running it!
A more powerful saw with a aggressive chain and some practice time too figure it all out that machine would be scary what you could do with it . Pretty impressive already . 👍👍 👍👍
Thanks buddy! Yes we are still working on the learning curve and I can tell ya already it’s very impressive! Have a great weekend!
Nice looking machine guys. What length are those splits? Take care, Ben. #ogaoutdoors
Ben, those cuts where at 22" some where at 2 4" ran the winch a little to far ahead ! Lol
After using the 835 going back to 2016 it doesn’t look like they have done much modification.not that it needs any! Unbelievable how much wood you can process in 8-10 hrs! Make sure you upsize you saw gas and oil cans!
Yes this machine is awesome! You can really busy through a log pile with it 🤠. Thanks for watching, take care!
Better keep some chains sharpened up
Unbelievable I've cut 9 loads with the new 29" bar still sharp as new! Keeping it off the ground makes a big difference, Thanks for the comment👍