A start to finish of how I build and install wardrobes
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- A start to finish video of how I build and install wardrobes
#wardobes #carpentry #cabinetmaking #alcove #bespokejoinery #construction #building #workshop #joinery #spraypaint #oak #mdf #festool #carpentry #carpenter #construction #handmade #handmadekitchenset #bespokejoinery #scribe #cabinetmaking #joinery #workshop #buildingconstructionwork #buildingconstruction
Machines
Paolini PS3200X Panel saw
Jet DC 1100CK Cyclone dust extraction
Jet AFS 1000 air filtration x 2
Sedgwick SM4 spindle moulder
Startrite SDX 310 thicknesser Planer
Record BS 250 bandsaw
Kreg DB 210 Foreman
Draper 38255 pillar drill
ITECH eB401 edgebander
Tools
Festool TS55 tracksaw
Festool OF1400 router
Festool PS Trion jigsaw
Festool LR 32 kit
Festool Rotex 150
Festool ETC 150/3
Festool RTS 400
Festool Domino DF 500
Festool Domino DF 700
Festool Kapex 120
Festool CTM 36
Festool CTL 26
Festool MIDI
Festool 577257
Makita DTD152Z impact driver
Makita DHP482Z drill driver x 3
Makita DMR 116 Radio
Makita AF506 Finish nailer
Makita RT07 trim router
Makita DHR171Z SDS hammer drill
Makita DUC353Z chainsaw
Makita DSS611 circular Saw
Makita DTM50Z Multi tool
Paint room
Graco turbo force II HVLP 9.5 compressor
Graco edge controll plus II gun
Wagner finish controll 5500 XVLP
Custom drying racks
MAXVAC 3900M3/h extraction x2
FILMING/EDITING EQUIPMENT
I phone 10
Go pro hero 4 silver
VTGo112 dashcam
KDENLIVE PRO
Old Laptop my wife got from work.
PAINT SUPPLIER
@rennercoatings6810
renneritalia.com/
/ @rennercoatings6810
FIXINGS,SUNDRIES & CABINETRY FITTINGS
@HafeleUKLimited
Hafeleuk.co.uk
/ @hafeleuklimited
WALK IN SHOP OF CHOICE
@toolstationltd
Toolstation.com
/ @toolstationltd
Have you tried Renner 863, fantastic stuff, my go to for veneers, and it's waterbased 👍🏻
Yes mate. It’s lovely to spray. I have been gifted some 1 coat 2part stuff that dries completely rock hard in under an hour so really need to experiment with that and film it. I have only been spraying a couple of years so I don’t really go on too much about it as I am still learning quite a lot.
You are smashing through them! 😂
Brilliant solution on the oak edging for the desk top, I will defo use that in my upcoming project, thanks for sharing.
Thanks. Tbh I always used to do this but perhaps got a bit lazy. Doesn’t take long either with a table saw, spindle moulder or router table!
Really appreciate you watching
Matt
Fantastic watch
Appreciate ya, thanks 🙏
A+
Nice one bud congratulations on the over 1k subs , Graham
Cheers Graham, thanks for noticing❤
Got the Ferrari on order!
That was a big in ……… nice to see you back
Thanks man, hope business and life is 👍🏻
Fascinating. The finish was absolutely top notch. Never used Renner paint but definitely gonna give it a go. Really good looking job, well done mate.
I can’t compare it to any other professional paint system but I never thought I would be able to get this level of finish with waterbased!
Thanks for watching ❤
So much great content in this video Matt, always learning some nuggets from your uploads, and always entertaining.
Watts joinery, dropping nuggets everywhere!😂 thanks for taking the time to watch!
Another great watch, thanks Matt
Still smashing g through the videos then 🫡 thanks for checking back in🙏
Great job Matt and some useful tips too. Good to see you posting again, it's been a while!
Thanks Eddie. May start doing a bit more. Hope all is well.
Absolutely stunning job, well done 👏
Thankyou mate. Did come out nice 👍🏻
Looks great. Top notch and you went for 6 hinges.
Good detail spot! Yes mate, always think it’s criminal to not include an extra hinge, even if you are paying £4 per hinge. I have started doing them 65/75mm from top and bottom too which Makes a huge difference !
@@Wattsjoinerybarn enjoyable videos buddy.
What a lovely job!! Love the hyper OCD level of detail you go into to get a great result....Pity I can't access Renner paints here....
Don’t know where you are but I know renner sell through a company called symphony coatings. Really glad you enjoyed it and thanks for checking back in.
@@Wattsjoinerybarn South west Ireland...I can't seem to find an Irish supplier🥲
@MrCassbren shame, tbh I have heard that they are all much the same once you start getting into the specialist suppliers like morells etc. I have only ever used DIY like johnstones and farrow and ball etc. the difference is amazing
O I totally agree with you on that..for a top notch job you need to use a professional grade of material from the start to the finish...paint is something that I really focus on because let's face it, it's the only thing many people notice...details are lost on an awful lot of people 😅
💯 that’s why I hold all my customers to ransom and painfully explain every detail and struggle I had before I leave their house😂
looked sweet 👍👍
Thanks man. It’s was a nice finish.
What was the jig used for the Festool router on the makita rail?
It’s the festool lr32 sled but you can just disengage the button so it runs smooth, before I had it I just made one out of laminating 6mm mdf, worked well
Thanks for watching
Do you happen to have an Amazon store or anywhere to see the items you recommend
Ha no! I think it got mentioned before! I will try and do something but not my strong point if I am honest.
Nice shorts btw
@@Wattsjoinerybarn I build bespoke wardrobes in my local area. Really want to start putting LEDs in my work. Also like your work a lot. It’s a exceptional quality
Thanks mate. Very kind of you to say! Yeah LEDs do look nice and once you get a good system it’s not too expensive. Like most caroentry the work is easy enough it’s just the knowledge that takes time!
@@Wattsjoinerybarn could you point me in the right direction for the fittings etc please
@@deancarter4109
Message me on instagram and I will send you some screenshots of what I order