Captain Xavier also have you considered making a cycloneshock shotgun I fell it could be extra cool using a elite shotgun cylinder... might be interesting
Neat, I'm in planning phase for my first major integration, and your mod-tips videos have been helpful in setting my plan in order and also in getting the idea gears turning in my head. Thank You Xavier, and I look forward to the rest of this mini-series.
This technique for connecting shell pieces is strong and simple. It also gives a scrap parts looks. I'm probably going to have all the screws as visible on my blaster as I can get them to be.
i'd also recommend quick release clamps for glue and drilling nerf stuff you want to stay together. I have 2 i use also for electronics repairs on screens that need to stay put while i heat up adhesive to be set
I'm so happy this video is up I just did my first integration with an Apollo and a centuron barley and it went well now I just have to follow this for my stock
A tip: Something I haven't seen any YT Nerf modder do, that may be helpful for the permanent bonding of shells... Since the shells are made of ABS, it dissolves in acetone. You can mix little bits of ABS plastic into a little jar of acetone, let it dissolve into a slurry or paste. Use this as the glue for ABS parts, and it chemically bonds all of it together as one pjece of plastic. It'll be as strong or stronger than if it was originally moulded in one piece. You can also use a.small syringe to drop acetone spots right onto the seams and it will bond the plastic. We use this technique in 3d printing of ABS all the time. It'll be stronger than CA glue, and in many cases even screws and mechanical fasteners.
@@CaptainXavier it’s easy to say a lot when using voice dictation for your TH-cam comments. So why is it that I don’t see too many people using solvent welding to adhere two different shells together during integration? I have to imagine there’s a reason....I mean, it's cheap and easy.
@@jasonjulian1 would you believe I cannot speak to the motives of all the modders out there? I have no idea why they don't do it. You would have to ask them. I don't do it because I prefer other less permanent options.
@@CaptainXavier hmm.. Too bad. I thought for sure you'd have more insight into this given that the community seems to hold you in rather high regard. Snark aside, I figured that you may have discussed it with other modders over the years. NM then.
When you use the glue..drill tiny holes in the connector piece an glue the part in place. Toss baking soda on it and it will harden in seconds as hard as glass
wow, I thought screws would look really ugly, but they actually aren't that noticeable! I would recommend using nuts on the other side of the shim if possible, just to make sure the screw stays in place. Sometimes a thin wall of plastic just doesn't work very well.
Very helpful! Great for some aesthetic styles I suppose. I may use this, but I feel some people may have been expecting something a bit different... Anyway. Big fan of your work. Nerf on my dude.
Hey Cap, I've been looking to make a Longshot frontgun into an air powered blaster, would you recommend a Titan tank? Or would I be better off using a Big Blast tank?As a side note, I'd probably be making it modular. .
Captain Xavier im new to modding Nerf guns i bot a rival nemesis and tryed wiring it to 3s lipo and it sucked a round in to the fly wheel and melted it to the shaft of the motor any tips on how to fix this
oof...that...that sounds bad...If it burned out the motor you will have to replace it. I would remove the flywheel and try to clean it up as best you can.
this may sound strange but i took the handle of a fork from the kitchen and popped the fly wheel off and why i was doing it some of the round that got sucked in there fell out and now the gun works just fine its now a steam of balls once again love the vids btw they got me to look at modding in a different way
Hello capt xavier I have a question to ask for you can you post the internal mech of the gattling rivals that you have made im bit curious you have gutted all the internals and you have just relay on the tube feeder that out of darts have made and design correct me if iam wrong about that part and im congratulate you for finish your gatling build mine is still on progress since october last 2017' im a bit a shame on my self ... btw the bro that design and make the 1st mega magnus shot gun maoh nakajima is my partner and my comrade in nerf wars .. just saying how proud that my team mates achieve more power capt ... kazuto signing off _ yeh we re from the Philippines
I specifically said in the Minigun video that I would NOT be doing an build guide. I will not be showing the internals. I gave away all of EIR's secrets. I will not be giving away TYR's. Sorry.
Just because I am the way I am I would add hot glue to the inside of the integration. I may not have moded nerf guns as integration but I do know it can add strength and you can ripe it of and do it again.
Do you just make your shims out of shells that you've harvested for parts already but no longer need or do you have a particular source you get them from? Thanks!
Hey Captain quick question do you know of anyone who could possibly 3d print a nerf rebelle combow trigger for the main gun mine broke and if not could you possibly recommend something to help me fix it?
You should make a little mod with the nerf rebel sneak attack and make a flint lock pistol I’ve seen stuff on google like a flintlock but you should make your own
Hi, I recently emailed you with a couple of questions, she could you please answer them, not to sound impatient but it’s my birthday in like a week and my family wants to buy me a modded nerf blaster from you, but they don’t know how
I saw your email, but as I have said in the opening of every Q&A video for the last year, I am not currently taking commissions. I simply do not have enough time. I am sorry.
I'm trying to make a DMR out of a retailater out of a retailater two longstirke barrels and a stock from a raptorstrike what type of apoxie would u recommend?
Another really dumb idea,..... that will probably end in a cheesy mess, make la nerf cheese ball launcher hahaha oh the mess this could cause. Edit the Cheetos cheese puffs balls, cream cheese balls Nasty Nasty mess
An oldie but a goodie! Thanks for posting this!
About the mega rebarrel using buzzbee shells it looks like it will fit with some sanding and dart post removal
Neat!
Captain Xavier also have you considered making a cycloneshock shotgun I fell it could be extra cool using a elite shotgun cylinder... might be interesting
SHD Armor Check out his Patron video, I think you will be pleasantly suprised!
Neat, I'm in planning phase for my first major integration, and your mod-tips videos have been helpful in setting my plan in order and also in getting the idea gears turning in my head.
Thank You Xavier, and I look forward to the rest of this mini-series.
Captain a hvz rule for your mini gun is have it locked away and the humans have to take you to pick it up then you can shoot the zombies
This technique for connecting shell pieces is strong and simple. It also gives a scrap parts looks. I'm probably going to have all the screws as visible on my blaster as I can get them to be.
OOH! Very useful for a custom blaster I'm working on, two exploders and firefly with rapid strike internals.
Great video captain keep up the great work.
I'm interested in seeing where this series goes. Integrations have always intrigued me, but they seem beyond my skill and patience. Thanks.
i'd also recommend quick release clamps for glue and drilling nerf stuff you want to stay together. I have 2 i use also for electronics repairs on screens that need to stay put while i heat up adhesive to be set
I'm so happy this video is up I just did my first integration with an Apollo and a centuron barley and it went well now I just have to follow this for my stock
This series has helped me alot thanks cap
A tip: Something I haven't seen any YT Nerf modder do, that may be helpful for the permanent bonding of shells...
Since the shells are made of ABS, it dissolves in acetone. You can mix little bits of ABS plastic into a little jar of acetone, let it dissolve into a slurry or paste.
Use this as the glue for ABS parts, and it chemically bonds all of it together as one pjece of plastic. It'll be as strong or stronger than if it was originally moulded in one piece. You can also use a.small syringe to drop acetone spots right onto the seams and it will bond the plastic.
We use this technique in 3d printing of ABS all the time.
It'll be stronger than CA glue, and in many cases even screws and mechanical fasteners.
That is a awful lot of words to say "solvent welding." Something the hobby is very familiar with. ;)
@@CaptainXavier it’s easy to say a lot when using voice dictation for your TH-cam comments.
So why is it that I don’t see too many people using solvent welding to adhere two different shells together during integration? I have to imagine there’s a reason....I mean, it's cheap and easy.
@@jasonjulian1 would you believe I cannot speak to the motives of all the modders out there? I have no idea why they don't do it. You would have to ask them.
I don't do it because I prefer other less permanent options.
@@CaptainXavier hmm.. Too bad. I thought for sure you'd have more insight into this given that the community seems to hold you in rather high regard.
Snark aside, I figured that you may have discussed it with other modders over the years.
NM then.
@@jasonjulian1 send me the link to your video explaining how to do it. I would actually love to see your process.
You should make a cyloneshock shotgun with a 3 elite dart cylinder for a shotgun blast
th-cam.com/video/z8f2ZnncPcI/w-d-xo.html
Captain Xavier my mistake for bad wording I imagined a pump action shotgun
Oh, I see. You know...I like that idea...
When you use the glue..drill tiny holes in the connector piece an glue the part in place. Toss baking soda on it and it will harden in seconds as hard as glass
Wow, this is a bit late! Great vid as always, Xavier!
hey Cap, you should really look into doing a hellboy style mod for the MEGA tri-break, I'm very curious about that
Congrats on 40k!
Your Canadian finally comedian nerf TH-cam that’s actually awesome
So true captian xavier. I always look for broken nerf guns to harvest parts
Do you know how well gorilla glue bonds to Adventure Force's plastic?
wow, I thought screws would look really ugly, but they actually aren't that noticeable! I would recommend using nuts on the other side of the shim if possible, just to make sure the screw stays in place. Sometimes a thin wall of plastic just doesn't work very well.
Indeed. Tiny bolts and nuts instead of screws would be more secure. I have yet to have Nerf screws tear out though.
Oh, maybe I need thicker plastic parts, because i have almost never had success screwing into just a piece of shell. It just seems loose!
Smaller drill bit? Don't over tighten? *shrugs
Very helpful! Great for some aesthetic styles I suppose. I may use this, but I feel some people may have been expecting something a bit different...
Anyway. Big fan of your work. Nerf on my dude.
I had an idea for a net launcher for the titan, it use 5 darts attached to a net, like the grapple jolt, and you can use it to stop people, I guess
Hey Cap, I've been looking to make a Longshot frontgun into an air powered blaster, would you recommend a Titan tank? Or would I be better off using a Big Blast tank?As a side note, I'd probably be making it modular. .
I would go with either a Titan or an XBZ
Very helpful man
For next week, can you do air power, for instance connecting an air pump to a titan tank?
Hey new video. I can’t watch now, but I will tomorrow.
Captain Xavier im new to modding Nerf guns i bot a rival nemesis and tryed wiring it to 3s lipo and it sucked a round in to the fly wheel and melted it to the shaft of the motor any tips on how to fix this
oof...that...that sounds bad...If it burned out the motor you will have to replace it. I would remove the flywheel and try to clean it up as best you can.
this may sound strange but i took the handle of a fork from the kitchen and popped the fly wheel off and why i was doing it some of the round that got sucked in there fell out and now the gun works just fine its now a steam of balls once again love the vids btw they got me to look at modding in a different way
thanks this vidio helped me a lot
Hello capt xavier I have a question to ask for you can you post the internal mech of the gattling rivals that you have made im bit curious you have gutted all the internals and you have just relay on the tube feeder that out of darts have made and design correct me if iam wrong about that part and im congratulate you for finish your gatling build mine is still on progress since october last 2017' im a bit a shame on my self ... btw the bro that design and make the 1st mega magnus shot gun maoh nakajima is my partner and my comrade in nerf wars .. just saying how proud that my team mates achieve more power capt ... kazuto signing off _ yeh we re from the Philippines
I specifically said in the Minigun video that I would NOT be doing an build guide. I will not be showing the internals. I gave away all of EIR's secrets. I will not be giving away TYR's. Sorry.
Eir and tyr. That rhymes
@@CaptainXavier Only The balls!
@@yapyapthedestroyer3470 ...no they don't... EIR is pronounced pronounce like buyer. Long "i." TYR is pronounced like fear. Long "e"
Would this work in mounting a magnus to a rapidstrike? And what would you recommend me using?
Probably. You can always just make/buy/print a rail to rail connector.
My doublestrike started rejecting darts out the frount whats wrong with it and how do i fix it
Sounds like your darts are worn out. Either get new darts or add a little etape in the barrel to improve the seal.
Just because I am the way I am I would add hot glue to the inside of the integration. I may not have moded nerf guns as integration but I do know it can add strength and you can ripe it of and do it again.
for my retaliator, should i buy the worker f10555 pump kit?
*shrugs Depends on whether or not you want one...
I apologize if this has been asked, but where do you get your plastic plates
+Riku_DarkWielder dead shells.
Captain Xavier should have guessed thanks lol
Hey cap! I am working on a bulpup retaliator and am struggling to find a material to cover areas (original trigger) any ideas?
I believe I used the slide from a Maverick. Barring that, fabricate something out of an old plastic tote or get some sheet plastic.
Thanks
Do you just make your shims out of shells that you've harvested for parts already but no longer need or do you have a particular source you get them from? Thanks!
+Lantern0000 dead shells mostly.
thank you
Hey Captain quick question do you know of anyone who could possibly 3d print a nerf rebelle combow trigger for the main gun mine broke and if not could you possibly recommend something to help me fix it?
I got nothing, sorry.
Captain Xavier well damn thats unfortunate looks like I'll have to get creative.
Wut ever happened to that longshot overhaul??
Captain Xavier there is a nerf rival claymore that I’d think you’d love
Indeed...mine is in the mail...
Captain Xavier nice r you going to do a video on it
(fights the urge to reply with snark) Yes, of course I will.
Captain Xavier 😂😂 good
What should I have as a basic modder's modifing supply?
Cosmilite he has a video
You should make a little mod with the nerf rebel sneak attack and make a flint lock pistol I’ve seen stuff on google like a flintlock but you should make your own
I like this technique, but it seems somewhat situational when compared to epoxy putty. I reckon both is the go.
Exactly. Notice it "Part 1"? I will be covering other techniques as I go. :)
I know it sounds stupid but I wanna put a stock and Box magazine on a Mini gun almost like the stinger's that they used in the Vietnam war
Congrats on the 40k cap! :) (I may be really late on that, but better late than never)
Thanks!
Do you known where I can get batterys that make my nerf elite rapidstrike shoot faster
Amazon, Ebay, e-cigarette stores.
Captain Xavier okay
If i cant find a way to fix it
4 years later
how long does light take take to ship to massacusets
No idea...I don't live in Massachusetts. But shipping is very slow. That is part of why their stuff is so cheap.
ok thanks that is what i wanted to know
Hi, I recently emailed you with a couple of questions, she could you please answer them, not to sound impatient but it’s my birthday in like a week and my family wants to buy me a modded nerf blaster from you, but they don’t know how
I saw your email, but as I have said in the opening of every Q&A video for the last year, I am not currently taking commissions. I simply do not have enough time. I am sorry.
Can you show us how to mod a longstrike?
Probably.
Would you be intrested in modding a regulator
Eventually, probably.
Captain Xavier likes putting things in and taking them out...
...so yeah, he likes to screw. What guy doesn't?
Hey is there anyway that I can send you my Nerf guns to mod?
Not at this time. I am not taking new commissions as I simply do not have time.
mega grappling hook
I used dowl use to reinforce an integration, Im not proud of it.
Dr.Jekell I mean... It works? Good.
Hello 👋
+NoisyBiscuit Productions hi
Hi
hi
Hey try to make a sniper loadout just a idea but I would like to see a sniper class/loadout like if you agree
I will this summer. I plan to run lots of different loadouts.
I'm trying to make a DMR out of a retailater out of a retailater two longstirke barrels and a stock from a raptorstrike what type of apoxie would u recommend?
For the build
I use Oatey's fixit stick.
Captain Xavier thank you
A QUADRUPLE SHORT BARREL Nerf rpg launcher IT CAN BE DONE ME THINKS
Am I early?
Another really dumb idea,..... that will probably end in a cheesy mess, make la nerf cheese ball launcher hahaha oh the mess this could cause.
Edit the Cheetos cheese puffs balls, cream cheese balls Nasty Nasty mess
So.. an Apollo?
Hi
hi