Man I can't thank you enough, I read this damn manual got so stress I could have threw this felony but I came across your video after many and you explained it well thanks alot. Joel Beard
Thanks, brother. I had hooked up an LED strip to my RC last night and after 2 minutes of running, the car stopped responding to my transmitter. I got so pissed, it being 5 days after the return window! Little did i know, it had just somehow come unbound from the transmitter. Following your instructions i got it working again. It had me worried there for a minute. 👍🏽👍🏽
This person does an excellent job on how to bind and calibrate the car and transmitter I was going crazy trying to do this with other videos thank for a fantastic video right on
Tnx for info, appreciated ur video very much. I installed the Spectrum Dashboard app and after 5 minutes of run time, my Horizon Notorious truck de-binded it self causing stress and agney I will attempt to re bind. Ron, Columbus, Ohio
Hey man I really need help, I tried this on the infraction and when I get to calibrate and don’t touch the neutral press set, then move on to full throttle press set it doesn’t flash at all only when I full reverse and press set but only to conecta back to the transmitter I literally following every step, it’s like my 7th try already
Try making sure your steering and throttle knobs are centered and brake to full. Then try again. They should always be centered when calibrating. And if that doesn't work, you may need to rebind and teach the esc the throttle and steering points again.
@@MatrixRC thanks! ended up getting it, apparently it takes a few tries for the people who struggle with the rc to recognize some movements, I noticed the receiver wouldn’t flash when I would full throttle or reverse when binding like yours did, just kept retrying till it did the same as yours and it worked 💯
I have the v2 Infraction electronics and the transmitter is the Dx3 all brand new out of the box. Same issue like yours out of the box red blinking light on esc no response by throttle or turning. I try to follow your video but my receiver doesn't turn on the orange light.
Sounds like your ESC is waiting for a signal from the receiver. Make sure the ESC wire is plugged into the correct channel on the receiver and correct direction. Should be in channel 2. Then try following the quick step again. If you're still having problems. Check in my description on this video where I post a link for basic binding and calibration procedures tutorial Spektrum released soon after I made this which is more in depth.
I just purchased one 3 days ago and I been driving it super fast what does bind and Calibrate do the machine lmk great video fast and straight to the point 💯💯💯🤝🏿🤝🏿🤝🏿
bro this was faster versio what i found today of binding felony need try this next week and if i get it working then i can sell my felony thx for the video
@@MatrixRC i got mine flashing but when it needed do thous forward and backward it didint take them idk why but it keep the light up i did turn the wheels from the controller too it did go black and flash after it i did it but didint stop the light as it should? Im gonna try this again in someday
Oh no. You can use a 4s or 6s. I just choose to do it because the ESC is programmed to operate safely within those parameters. And when programming if something goes wrong I want to honestly tell tech support that I didn't do anything outside of vehicle specifications. I hope that makes sense.
I do not know what you mean. Are you referring to how to open the receiver box? If so, take a 2.0mm hex driver and unscrews the 4 screws on top of the box and voila👍🏾 hope that helps.
Thanks for this video mate, I think you may have just saved me lol. I got my felony last week , took it for a speed run at airstrip today and only got 45MPH !!!! I was gutted , then someone showed me your video and it seems alot more powerful now, I need to go back to airstrip to test properly but in sure it's faster now ha ha . I can only assume that I set it up wrong initially and messed-up rhe throttle maybe? Anyway I'll let you know , cheers dude
Ok. Depending on which hobbywing esc you purchased it should have came with a manual. However, if you lost it go to there website and download the pdf. Manual and follow that. Or you can always Google it based on your esc and videos on how to do it should pop up. But you shouldn't have any trouble.
Hey Matrix! I’ve just received my Arrma Felony 6s yesterday, but when I go to plug everything in, my transmitter is flashing red and yellow (while making a beeping noise). Any idea what it means? I’m guessing it’s LVC. Thanks!
Reset your transmitter and do the bind process over again. To reset the transmitter to the factory settings, power on the transmitter while holding the steering wheel to full left and the trigger to full brake. Make sure you are not to close to the receiver. Be a couple of feet away. Make sure your lipos are fully charged and fresh batteries in the remote. Good luck.
@@MatrixRC nice 1. silly question i know but just makin sure incase i accidentally do something wrong following manual :) 1 of only a few clips ive found on how to do this so big THANKYOU.
No but I needed to because I got one the first batch and my vehicle did not respond automatically. However, it was good for me to do to get my end points adjusted which you should do to every car you get the first time.
I just really don't get how everyone is getting theirs and my status still says awaiting manufacturing shipment. Looks like I may be in the second shipment - really hope not. That's good information you shared. Most have never had to pair an AVC receiver. Another tidbit is AVC uses channel 1&2 of the receiver (even though noting is plugged into it). Should you have lights or others like the brake, it should go in channel 3 or 4. Thanks again for sharing - looking forward to running videos.
🤨my brake is all the way up and I use a about 1/4 AVC to 1/2 depends on how the car is tracking. I notice 100% AVC the car acts a little wonky cause its constantly trying to center when you want to bring the car over.
Oh sorry did not understand what you meant. When calibrating yes my brakes are at 100% and the avc does NOT matter. The brakes and steering endpoints matter.
My guy thanks so much. This Video Right Here got me from Welp guess I ain't gonna be able to run today. To F%@K that we outta here ripping it up . Thanks again for This 👍🏽.
I was staring at my receiver thinking “my receiver looks nothing like the one in the book” 😂 I didn’t know I had to open up the housing lolololololol 🤦🏻♂️
Man I can't thank you enough, I read this damn manual got so stress I could have threw this felony but I came across your video after many and you explained it well thanks alot.
Joel Beard
🙏🏾💯 I experienced the same thing. Glad it helped.
Where is the set button?
Where is the set button on the remote?
Thanks, brother.
I had hooked up an LED strip to my RC last night and after 2 minutes of running, the car stopped responding to my transmitter. I got so pissed, it being 5 days after the return window!
Little did i know, it had just somehow come unbound from the transmitter.
Following your instructions i got it working again. It had me worried there for a minute. 👍🏽👍🏽
Glad it helped you.
This person does an excellent job on how to bind and calibrate the car and transmitter I was going crazy trying to do this with other videos thank for a fantastic video right on
Mint! Just got my first Arrma, a Typhon 6s. Throttle seems funky, your tutorial helped! Have a good one!
Glad it helped!
We need more content like this... straight to point... Great work
Awesome, simple, concise, perfect set up tutorial!
Tnx for info, appreciated ur video very much. I installed the Spectrum Dashboard app and after 5 minutes of run time, my Horizon Notorious truck de-binded it self causing stress and agney I will attempt to re bind. Ron, Columbus, Ohio
Glad it was helpful! 💪🏾
Exactly what I was looking for. Thanx
Thank you so much! Mine comes tomorrow and I can't wait!!
thanks my man, avc was freaking out after I put a new servo in
Awesome 👌🏽
jooooo, just bought my first arrma, thx 4 the video, exactly what i needed !!!!
You’re welcome 😉
I can’t seem to calibrate mine, I do everything he says, calibration won’t work. The esc blinks red and I only have steering and no throttle
Make sure your throttle knob is centered and sterring is centered and brake 100.
Thanks I just Picked up a Felony yesterday.
Np Have fun with it. Its addictive 😍 👍🏽💯
Hey man I really need help, I tried this on the infraction and when I get to calibrate and don’t touch the neutral press set, then move on to full throttle press set it doesn’t flash at all only when I full reverse and press set but only to conecta back to the transmitter I literally following every step, it’s like my 7th try already
Try making sure your steering and throttle knobs are centered and brake to full. Then try again. They should always be centered when calibrating. And if that doesn't work, you may need to rebind and teach the esc the throttle and steering points again.
@@MatrixRC thanks! ended up getting it, apparently it takes a few tries for the people who struggle with the rc to recognize some movements, I noticed the receiver wouldn’t flash when I would full throttle or reverse when binding like yours did, just kept retrying till it did the same as yours and it worked 💯
Really appreciate this video. It really increased my knowledge.
Glad it was helpful!
What if my receiver doesn't even blink the ornage light? Its brand new out of the box.
Orange light what receiver do you have?
I have the v2 Infraction electronics and the transmitter is the Dx3 all brand new out of the box. Same issue like yours out of the box red blinking light on esc no response by throttle or turning. I try to follow your video but my receiver doesn't turn on the orange light.
Sounds like your ESC is waiting for a signal from the receiver. Make sure the ESC wire is plugged into the correct channel on the receiver and correct direction. Should be in channel 2. Then try following the quick step again. If you're still having problems. Check in my description on this video where I post a link for basic binding and calibration procedures tutorial Spektrum released soon after I made this which is more in depth.
Worked perfectly on my infraction v2, thank you sir👌
Good to hear
@MatrixRC thx for the post....I just opened my box and remote was working...do I still need to do this?
That's a great new car smells good huh? My controller didn't work but you should do two things.
1. Speed throttle calibration
2. Steering end points
I just purchased one 3 days ago and I been driving it super fast what does bind and Calibrate do the machine lmk great video fast and straight to the point 💯💯💯🤝🏿🤝🏿🤝🏿
bro this was faster versio what i found today of binding felony need try this next week and if i get it working then i can sell my felony thx for the video
🙏🏽 welcome 🙏🏽
@@MatrixRC i got mine flashing but when it needed do thous forward and backward it didint take them idk why but it keep the light up i did turn the wheels from the controller too it did go black and flash after it i did it but didint stop the light as it should? Im gonna try this again in someday
I don't understand why it's not letting me calibrate the throttle even though I'm doing everything correctly
It is not common but probable. You may have a defective receiver. Be sure to make sure your wires are plugged in correctly.
Great video but I'm doing this right now and for some reason mine wont calibrate and bind
Try resetting your remote. And try again.
Hi, does this also work for the arrma infraction 3s?
Yes it does with the same remote and receiver assuming it’s still factory.
Thanks! Greetings from Germany@@MatrixRC
You’re welcome 👍🏾
U have 2 batteries connected?? It can't just be done with any power source..Basically like a 3s. Or does it need all that to be calibrated
Oh no. You can use a 4s or 6s. I just choose to do it because the ESC is programmed to operate safely within those parameters. And when programming if something goes wrong I want to honestly tell tech support that I didn't do anything outside of vehicle specifications. I hope that makes sense.
@@MatrixRC YEESSZIR. Thanks!!
How do u open it
I do not know what you mean. Are you referring to how to open the receiver box? If so, take a 2.0mm hex driver and unscrews the 4 screws on top of the box and voila👍🏾 hope that helps.
Bro, what a life saver I had iusses binding my infraction up. Watch your video boom just like new thanks, bro !! KEEP BASHING.J142
Glad it helped
@MatrixRC hell yeah and always wonder why they do that shit too. Thx again
No problem
Thanks for this video mate, I think you may have just saved me lol.
I got my felony last week , took it for a speed run at airstrip today and only got 45MPH !!!! I was gutted , then someone showed me your video and it seems alot more powerful now, I need to go back to airstrip to test properly but in sure it's faster now ha ha .
I can only assume that I set it up wrong initially and messed-up rhe throttle maybe?
Anyway I'll let you know , cheers dude
Thanks 👍🏽💯 and I know it sucks. I just crashed the other day because of a piece of foam bumper. But it was just a testing day nothing serious.
Thank you very much brother thanks for this video you made I was able to go ahead and do the calibration exactly the way you explained it.
Glad it helped you😊👍🏽
Thanks bro this was extremely helpful, especially at late hrs...💯💯💯💯
Fan-friggen-tastic man! Thanks so much.
My pleasure!
I need to no how to calibrate a taxxas xmaxx with a hobbywing esc
Ok. Depending on which hobbywing esc you purchased it should have came with a manual. However, if you lost it go to there website and download the pdf. Manual and follow that. Or you can always Google it based on your esc and videos on how to do it should pop up. But you shouldn't have any trouble.
@@MatrixRC hobbywing max 6 but I just want to watch someone do it cause I learn and you seem to explain as you are doing it
Copy that.
Hey Matrix! I’ve just received my Arrma Felony 6s yesterday, but when I go to plug everything in, my transmitter is flashing red and yellow (while making a beeping noise). Any idea what it means? I’m guessing it’s LVC. Thanks!
Reset your transmitter and do the bind process over again.
To reset the transmitter to the factory settings, power on the transmitter while holding the steering wheel to full left and the trigger to full brake.
Make sure you are not to close to the receiver. Be a couple of feet away. Make sure your lipos are fully charged and fresh batteries in the remote. Good luck.
@@MatrixRC Thanks! My Felony is now correctly binded and calibrated. Time to bash!
glad i found this,, will this work with the same dx3 on talion exb?
It's the same exact system
@@MatrixRC nice 1. silly question i know but just makin sure incase i accidentally do something wrong following manual :) 1 of only a few clips ive found on how to do this so big THANKYOU.
WELCOME
Worked great. Thanks for the video!
You're welcome!
Excellent. You have a new subscriber
Awesome, thank you!
Idk why this wouldn't be in a quick start guide even the manual doesn't have the throttle part thanks
Your most welcome
Just got mine going thank you!
Glad I could help!😁👍🏽
@@MatrixRC life saver!
does every felony need to do this???
No but I needed to because I got one the first batch and my vehicle did not respond automatically. However, it was good for me to do to get my end points adjusted which you should do to every car you get the first time.
I just really don't get how everyone is getting theirs and my status still says awaiting manufacturing shipment. Looks like I may be in the second shipment - really hope not. That's good information you shared. Most have never had to pair an AVC receiver. Another tidbit is AVC uses channel 1&2 of the receiver (even though noting is plugged into it). Should you have lights or others like the brake, it should go in channel 3 or 4. Thanks again for sharing - looking forward to running videos.
Thanks for watching. And yes you can use ch 3 or 4 f or lights and hand brake.
I just bought one. What batteries are you running?
I'm running Spektrum and power hobby.
Nice concise vid, sir! Thx
If you would show the transmitter it would be more clear what to do
AWESOME MY FRIEND!! I just got mine in the orange and it looks super sexy. Thanks for the share!!
Anytime 😊
Does the brake and avs HAVE to be centered or all the way up?? I've seent u with at half, and others with it all the way up.
🤨my brake is all the way up and I use a about 1/4 AVC to 1/2 depends on how the car is tracking. I notice 100% AVC the car acts a little wonky cause its constantly trying to center when you want to bring the car over.
@@MatrixRC no....wen calibrating..not normal driving
Oh sorry did not understand what you meant. When calibrating yes my brakes are at 100% and the avc does NOT matter. The brakes and steering endpoints matter.
@@MatrixRC cool deal. Thanks
No problem
Thank you it helped out greatly
Appreciate the video because the manual doesn’t do a good job of explaining this
Glad it helped
Let’s get it bro 👍🏾💯 Rcfam4life
Thank you! Helped me !
👍🏽🙏🏾💯
Worked great except I had it on the counter top and it flew off but other than that it worked
Congrats big bro. Great vid. 💯👍🏾
Thanks brutha!
Does it come bound out of the box usually?
Mine was. Having a blast with it
Yessir! Enjoy it. And get plenty of spare tires.
Lol! My rear tires are shot already. Just ordered two sets from horizon but they are preorder so I’m not too hopeful I’ll get them anytime soon.
Backorder too
Mine aint working?
What's going on? Why do you need to bind the dx3 remote.
Awsome video 🔥
Thanks 🔥
Awesome brother ,thanks for the info 👍 is this the same process for a kraton 8s?
Yes
@@MatrixRC thanks dude
Np
Thanks for the heads up just grabbed one for me and my son for Easter.
Thank you so much for your help 😎
No problem
Good vid brah not too many on these cars
Thanks
You the man
I really appreciate that 😬
No problem have fun!😉👍🏼💯
Thanks a lot man 👍🏻
Infracion v2 all the way!
My guy thanks so much. This Video Right Here got me from Welp guess I ain't gonna be able to run today. To F%@K that we outta here ripping it up . Thanks again for This 👍🏽.
Thx 🎉
You helped
🔥🔥🔥🔥🔥🔥
Udaman!! 🙏🏻🙏🏻🙏🏻🙏🏻
I was staring at my receiver thinking “my receiver looks nothing like the one in the book” 😂 I didn’t know I had to open up the housing lolololololol 🤦🏻♂️
What’s the piece of rubber hose for in the bag?
For intercooler look or super charger manifold cover or a straw for your drink 🍸!👍🏽😉
I've just got this car..
It’s definitely my favorite on road 1/7
Thanks for not showing what button on receiver! We'll done
It’s ok. There’s only one button on the receiver and it looks like the spektrum symbol.👍🏾
👍🏻👍🏻🚘
the dog like really I'm trying sleep man
Lmbo 🤣 good catch. She was exhausted after our run!
@@MatrixRC was fine till you put the speed on and then was like ohh shit what's that lol stay safe and well and keep up the great content
Thanks I will.👍🏼💯
Aslo works for the typhon v5.
thankyou my pimp
That's 👌
@@MatrixRC i need help, i’m not able to bind it