CARBON FIBER TRUNK INSTALL *GONE WRONG* 15+ WRX/STI Subaru *VIS*
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- Installing new VIS carbon fiber trunk on my Stage 3 Subaru WRX
BUY SUBIE PARTS: boostitperform...
Save 10% PROMO CODE: WRXnRYAN
Instagram:
Follow Me @ WRXnRYAN
Car: 2017 Subaru WRX Stage 3, Johnson Tuned, 390WHP / 355TQ
Tomei Extreme Titanium Ti exhaust
Catless J Pipe
Turbo XS FMIC Kit
Grimmspeed EBC
TGV DELETE upper and lower
EGR delete
Cobb Flex fuel kit / E60 blend
DW 300c LPFP
Boomba BPV
MAP Intake
Perrin AOS
Perrin Dress up mods (engine bay)
Lowered On Fortune Auto 500 Coilovers
VIS Carbon Fiber Trunk
18x9.5 +38 offset Gold Rota Grids
Hankook Ventus V12 Evo 2
Corbeau RRB Racing Seats
Amazon Links To Car Wash Supplies:
SunJoe Pressure Washer: amzn.to/2Bf9F2d
Foam Cannon Bottle: amzn.to/2XarebT
Extended Pressure Washer Hose: amzn.to/2XBCBc0
Chemical Guys Foam Soap: amzn.to/3gDLuuz
Chemical Guys BIG DRYING TOWL: amzn.to/3gtwf7c
MTM Spray Gun: amzn.to/3gHi6Ua
Chemical Guys Tire Brush: amzn.to/3erToF7
Wheel Barrel Brush: amzn.to/2ZLuhsV
Adams Wheel Cleaner: amzn.to/3ce9p01
Amazon Links To Mods:
Hikari LED BULBS: amzn.to/2AlkE9V
Vanmass car phone charger: amzn.to/2UDUVTc
3.3 ohm resistor: amzn.to/2UO3wlA
Iron Remover Spray: amzn.to/2HwJBkN
Perrin Sump Restrictor: amzn.to/2O5M04K
IKON Front Lip: amzn.to/2yLc2bg
J PIPE: amzn.to/2MujFX3
Fortune Auto Coilovers: amzn.to/319TNW1
Rota Grid Wheels: amzn.to/33oYWuS
Grimmspeed Top Mount Intercooler: amzn.to/2OMAGif
Fumoto Oil Drain Valve: amzn.to/2KnO5rU
Fumoto Oil Drain Clip: amzn.to/2KrMjFW
Rotella 5W40 Oil: amzn.to/2KkICC2
Invidia R400 Exhaust: amzn.to/2G2mNbm
Mishimoto Intake: amzn.to/2HHQJH5
EGR DELETE: amzn.to/2HImUq7
TVG Delete: amzn.to/2pj01mm
Boomba Short Shifter: amzn.to/2GC8yrD
Boomba Shifter Plate: amzn.to/2IuXQUq
Perrin Shifter Stop and Bushing: amzn.to/2IAbaXW
Carbon Fiber Front Lip: amzn.to/2IxhAH7
Perrin License Plate Delete: amzn.to/2FPqgqE
Rear Spats: amzn.to/2pkau0P
BC Coilovers: amzn.to/2tYG2hi
Boomba BPV/ BOV: amzn.to/2pkay0z
Roof Vortex Generator: amzn.to/2pku5Op
Side Skirts: amzn.to/2pmGhOo
Mud Guards: amzn.to/2pmGjWw
Yellow Fog Tint: amzn.to/2HMuuo5
Smoked Headlight Tint: amzn.to/2JRXIhL
please like and subscribe
Sure you might of known this, but the Holes are for JDM plates - you can buy a JDM to USDM license plate bracket on Amazon, had to do this for my JDM sti trunk ....
Right on . Thanks bud. I didnt know that . Ill have to look into that
Ya the stock holes on the front bumper for a WRX are for JDM also. I did not want to drill my front bumper so just made a little bracket. Also if you do that it will be centred as it seems to be of to the right as you are using 1 JDM hole.
I feel your pain with expensive carbon. Just fit my hood this weekend. So annoying how much work such expensive pieces can take to fit.
Just got this trunk myself to match the hood and I'm having a fair amount of fitment "issues"; which is surprising because the hood was a perfect match to OEM!
That sucks you had so many issues with the install. I got the Seibon OEM style CF trunk for my 16. Literally no issues, everything went back on and in perfect.
Yea. Wish vis would have been that way
Beautiful. welcome to the carbon trunk gang! sadly mine had to have adjustments made and came with a crack :/ but has been fixed and re cleared. wax as much as you can. re clear if you can but it will probably eventually fade. looks awesome brother.
Thanks bud. Haven't heard from you in a while. Nice build . 🔥
Fire man! Great vid. Sorry you had the problems. Glad I went with the STi wing instead of doing the CF trunk swap!
Thanks bud
won’t be getting a carbon trunk but ducktail instead, thanks for sharing. Car is beautiful.
Looking 🔥 man. Hopefully a Japanese to US license frame adapter gets you squared away. 👌.
Yea. Ill have to look into that
Keep sporting that cross chief 💪 I know you got love for Jesus
💪
Is it me or the gaps to the trunk are significantly larger than the oem ones? Ik carbon will never be perfect but I feel you have alot of gap from the trunk to rear quarter panels
Nice man your car has gone through some nice changes and for the carbon fibre thing i had the same thing happen to me when i bought carbon fibre grills for my 07 the holes didnt fit right so had to improvise. Anyways again nice car and its good to see you making videos again keep up the good work.
Just a heads up for anyone else interested in VIS products. They are known to have a lot of fitment issues. My V2 heat extractor hood actually sits higher on one side, at first I thought it needed adjustment but further looking into it I actually received a bad mold. Understandable for mass produced products but as also mentioned in this vid when you are paying close to 2K for these items we shouldn’t have to deal with these minor issues.
I have been wanting that trunk for my sti for a while
ill suggest either smoking your f1 light or picking up the olm nb+r smoked light to match your taillights
I had the EXACT same issue with my VIS carbon fiber trunk. I had to sand down the left side of the licenses plate light in order for it to fit. Also, had to predrill my own holes to get the licenses plate to fit
Best looking trunk for the 15+ subies, amazing choice bro 🙌🏻 just need the carbon hood now 😂
Thanks bud. I agree. And maybe one day. 🤷♂️
I installed my trunk hungover af maybe still a bit drunk w no sleep in about 20 minutes
I just put mine on last night and had the exact same issues, guess they haven’t bothered to fix their mess ups
I had that VIS trunk on my CWP WRX took it off got tired of it. Went with stock trunk and CF duckbill instead.
Looks so good dude! Sucks you had so many problems. Glad you got it figured out.
Thanks bud. It was worth it though
Please keep making these educational and fun to watch videos bro💯 you’re doing great! +1 more sub🙌🏽
debating if i should take the wing off on my 20’ WRB STi and going with a carbon trunk
Would you recommend putting on any extra clearcoat / protection for the carbon fiber?
If anyone is watching and reading this. Be sure to get the trunk from Vis directly so you don't accidentally get a foreign trunk with holes in the wrong spot like he did.
that's unacceptable i'd be contacting them man
on the flip side you made it work and it looks sick!
Thanks bud. And I usually alway make it work if I want it bad enough
Do they not make these anymore ? I can’t find the website
i was thinking about going for a carbon fiber trunk but i might just go with the original sti trunk for now haha.
I dnt usually say this word often.. but dayum that looks LiT !!!🔥
Thanks bud . It is pretty litty titty🤣
Fantastic looking cf trunk wayyy better than oem!
Look awesome bro I’m thinking about doing mine too hope you keeping the car bro
How many inches did you drop the car with coils?
yeah that trunk wasnt made for usdm its made for jdm. i wouldnt have drilled a hole in the plate but rather on the trunk. now if you get the bracket youll see the hole in your plate lol well i guess new plates as well.
bro love your set up with your WRX keep it up.
Thanks
Your car looks so good i got a 2012 subaru impreza and i got a vortex generator shark fins on the roof behind the antenna u should mod that one for your next video bro thumbs up ur trunk look so good are you thinking of carbon seibon hood ohhhhh ur next mod? Lol
I had the vortex generator as well but I took it off last week to wrap my roof. And hood will be in the future
Is there a slot for the backup camera to go in?
Did you email VIS and ask them why there were so many defects with the trunk.
Nice! I would buy it if it came with the Sti wing too! I just can’t see my car without that rear wing!
I had the same exact problem on my trunk for my 16 sti. what did you do to get the tag lights to fit? Can i just dremel the tag light section? i dont want to mess up the carbon
Thanks for bringing us yet another vibe 🥂 enjoyed
Thanks bud. Glad you enjoyed it 😊
End result looks really nice! When you deal with carbon fiber parts that cost you a pretty penny such as this do you take any extra steps to insure that the quality lasts? Do you apply any PPF or ceramic coat it?
Yea. Ceramic coating will be added
I would love to see those red intake manifold from brz/gt86/frs in the wrx with the perrin stuff that would be an awesome look
Hey man! I just got this same trunk and can’t get the lights & camera in. Any recommendations on what exactly you did?
That trunk is for a jdm plate not a usdm plate
Did u got a trunk for Europe market?
The trunk looks awesome man
Pity you had to stuff around a bit though
On a side note
When you went to grab your keys near the end of the video and the camera was on your seats (so pretty btw) I was wondering how the have kept up since you installed them
Like are you still loving them, would you suggest anything els
What is it like living with them etc
Love the seats. Night and day from stock. I would highly recommend
Ryan's Random RideZ awesome thanks man ^_^
I would’ve just sent that garbage back and let them send you a new one. That’s pretty stupid how it wasn’t fitting correct like 5 different ways.
You just need a nice diffuser now
the holes are bigger because its meant for japan
bro what size your wheels & tires? looks perfect
... 18x9.5 +38 offset Gold Rota Grids
. It's in his description (under "show more", along with other bits and pieces and two dozen links to stuff he's bought.
The only thing my OCD would bug the shit out of me is that extra open hole in the license plate
Same.
Same.
Nice 👍 that car will look awesome with some enkei Rpf1
I agree bud I love the white and gold look
Yeah the car looks beautiful like that
Is there anything we can do to stop the carbon fiber trunk from flying open at the speed of light ? Scared that it might crack or damage the trunk
You can remove the bars inside the trunk. That's what springs the trunk up. Remove it then the trunk will just pop up not flip all the way
What happened to the videos
3m double sided tape what i use front and back bumper
For what?
are you lookin to sell the carbon fiber trunk trim from your old trunk??
nevermind, commented that before I watched the entire video and realized you installed it on the new trunk (face palm)
Should have went seibon
Looks sick 🔥
Thanks yo🤘
Hard work money time and love
I neeeeeeed it!!! 🔥🔥
Use the promo code
So you're saying i should go with Seibon??
Up to you. Unless your ok with cutting a little away
Like it 🔥
I couldn't live with that fitment issue Bullshit happens to many times !!!!!!!!!!!!!!I can relate B.SSSSSS Quality is not the same WTF!
You from indiana? What part?
Southside indy
small world
That shit looks fire
RaceCar life.
My personal opinion genesis coupe still better looking car than WRX but you guys are not ready for this conversation ; )
No chance lol wrx is way better looking
Screw that shit! If I’m paying $1,400 for a trunk it better be ready for me to just transfer shit! I don’t want to be drilling or cutting things out. Send it back lmfao get their shit right
Seibon Carbon fiber much better my guy and cheaper
Oem looks better imo
I like both. But hey. That how that car build is. Everyone has there own opinions. Thanks for your input 👍
Ryan's Random RideZ honestly. Carbon hood, and it will look soooo good!
Especially with the tail lights it’s a nice touch
@@matt89060 I agree. Maybe one day
Really don't want to be negative cause I've been following this build for years but why is this exhaust on here? It sounds and looks terrible. It can't even make up all that trash in perfor.ance. have an Ark exhaust and it sounds awesome! Plus no drone! If you want to build the channel a bit make sure you don't cut corners. I will continue to follow and show support, just want to give my feedback for what it's worth. Keep grinding!! 👍💯
so basically don’t buy a VIS one. U had so many problems for such a expensive item.
I'd say still buy vis but only if your of with cutting it a tad
Now time to get rid of those ugly ass wheels
try to be more positive
Looks awesome 🔥