ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Predator 3500 Inverter Generator Pull Start Rope Replacement
ฝัง
- เผยแพร่เมื่อ 17 พ.ย. 2023
- Step by Step Replacement Procedures to Replace the Pull Start Rope.
Recommended tools needed for repair:
Standard head screwdriver
Phillips head #2 screwdriver
Needle nose plier
Allen wrench
Vise grip
Socket Ratchet
10 mm socket
5/16 inch socket
Extra long handled combination wrench 5/16 inch
0:14: ⚙️ Repairing a popular inverter generator by replacing the pull start rope, with tips on maintenance and generator features.
6:45: 🔧 Demonstration of replacing parts on a generator including cotter pins, washers, and screws with the use of tools and storage cups.
15:17: 🔧 Demonstration of disassembling the generator to access and replace the pull start rope.
25:13: 🔧 Maintenance demonstration of replacing pull start rope on a generator, involving removing wheels and screws.
36:37: 🔧 Demonstration of replacing a mounting bracket and accessing screws with an open-ended wrench for a generator pull start rope.
47:39: 🔧 Troubleshooting the pull starter removal process due to a blocking bar, requiring removal of screws and an aluminum frame.
56:23: ⚙️ Demonstration of replacing the pull start rope on a generator, ensuring proper alignment and functionality.
1:04:34: 🧹 Cleaning the interior of the chassis and replacing the pull start rope on a Predator 3500 inverter generator.
1:11:04: 🔧 Replacing the pull start rope on a Predator 3500 inverter generator, including tying a secure knot and testing the engagement.
Recapped using Tammy AI
#predator #Predator3500 #invertergenerator #rope #harborfreight #howto #repair
Thanks! I have a Predator 3500 Inverter. I tried to start it this morning and the rope snapped in half. Thanks to your video I am up and running again!
Nice work Mitchell! Thank you for watching and please like, share, and subscribe. TYMM :)
I am doing same repair. How long did it take?
Thanks for this. I now know I’ll let my small engine repair guy do this so I don’t get annoyed. lol
It goes much faster after watching this video. You will have a mental map in your mind on all the steps. It can be easily done if you have a little patience and some tools.
Thank you very much
My rope broke this afternoon and I fixed it as I watched you
Love to hear this helped. Thank you for watching and please like, share, and subscribe. TYMM :)
Thks 4 da video i have begun all mods rope install hardest..kudos
No problem 👍 You are very welcome. Thank you for watching. Please like, share, and subscribe. TYMM :)
Thanks for doing this. Helps me out a lot. The real time is the key. Really gives you a sense of what it actually takes.
You are very welcome. By watching the video first you will know exactly what to do and it will save you time once you start.. Goes faster for sure. Thank you for watching and please like and subscribe for more TYMM videos. :)
Thank you so much!!! I really appreciate good folks like yourself in sharing how to do things!!! Really helped me fix my machine. I also removed the spark arrestor - we live at a higher elevation and this was the trick for us
My pleasure Zane! That's my goal is to help others. Thank you for the nice comment and feedback. Please subscribe for more great TYMM videos. :)
Thank you for the helpful video. I think im going to Toss that bracket to hold the rope. This is my 2nd 3500 generator and ive only used the rope maybetwiceon both machines.,And they both have broken off ,roughly the same spot as where that bracket sits.
Thank you for the positive feedback Nick. Glad this helped you. It is a lengthy video but well worth watching the steps. The bracket is for the pull rope to feed through. Like a guide. Maybe it is causing friction on the the pull rope? Thank you for watching. Please like, share, and subscribe. Take care! TYMM :
Vary helpful thank you
You're welcome! Thank you for watching
I'm leaving another comment. You do not have to remove the center nut on the pulley to re-string pulley. Clearly, he is doing it the hard way , I usually pull string out and wind pulley up , line uo holes and thread string in, and insert screw driver in opening on pulley to keep pulley wound up as I started any open frame generator is so easy to work on any enclosed generator is designed for a shop to work on this is crazy and this guy took too many components off to restring pulley
@jamesray3930 - This is the way I did it. Not much more work. I was able to measure the pull string out to the length it originally was by doing it this way. You do not need to pay for a shop to fix this, when you can do it yourself. All steps shown are needed. Best wishes to all DIY viewers. Hope this saves you all money and time. James, if you do not have anything positive to contribute then best not to say anything. Its not a good reflection on your character. I am here to help people.
Can you pull start it without the battery connected?
Yes. The battery is for the electric start.
@@texasyardmanandmore3822 cool thanks alot.
Thanks but I think the robe rarely break because people use electric start mainly
True. The primary is electric start but if battery gets weak or if the starter, CDI board, solenoid fails the pull rope will come in handy.
where can i buy the outside parts parts for the 3500 inverter my old one got crushed by the
fifth wheel in the back of my truck thank you
You can find them on eBay.
thank you and Happy New Year
Happy New Year. @@norbertomachado5465
The gas tank is to remove.
No gas tank removal needed.
Who designs crap like that?
These are actually pretty good generators. Very compact inside though. So makes it a little more difficult to get at things.
Talk about adding about 1000 unnecessary steps.
All steps are needed. This video is for anyone who has never replaced the pull start rope. Done in real time. After watching this video it will save someone else time while repairing or replacing theirs.
Well then why don't you post a video showing us all how to do this minus the 1000 unnecessary steps. We are eager to watch.
@@mrgreenbudz37 will do
@@mrgreenbudz37I'm not trying to put this video down, he did a good job with the way he went about it. But I think I will make a video. Looks like all you have to do is remove the entire front frame without removing all the stuff he did. Chinese put stuff together with preassembled modules. You just have to reverse what they did. I guarantee they didn't put it together like he took it apart. I've got to replace mine, I'll probably make a video because there's none on TH-cam except this one. I might get humbled, but I'm pretty good at this.
I'm done with predator junky generator going back to champion much easier to restring and work on total unnecessary how this is made and work on junk
Hi James. I have had my Predator 3500 inverter generator since 2020. It has been a rock solid generator for me. Only issues I have had are the starter went out and pull rope string broke. 1000+ hours on it and powers my generator nicely. A/C no problem. I think it depends on each persons experience. I can see how you may be frustrated but everything eventually needs maintenance at some point. Thanks for watching. TYMM :)
@texasyardmanandmore3822 This was my second one , im done with predator generators going back to the champion generator, an open frame with a remote start, easy to work on, and change oil all I know you get what you pay for I keep the generator on my semi it all kinds of weather it can't handle the abuse of the road push start stop working and string on pull start broke this this unit useless junk
Well maybe it is the person using the tool. I have had my Predator for 7 yrs and outside of changing the oil all the time and a fresh spark plug once a year the pull cord just breaking is the first. Most people don't know how or are too lazy to take care of their tools.
@@jamesray3920Mine has 3250 hours, flawless.