Electric Grinder Restoration | Hitachi Bench Grinder
ฝัง
- เผยแพร่เมื่อ 6 พ.ค. 2019
- Electric Grinder Restoration | Hitachi Bench Grinder Video
This is Hitachi grinder that I bought from Japan recycle shop 60$. I don't know how old this grinder is. This grinder looks very rusty and run not so good. But After the restoration it look like new one and works very well. I really love this grinder. You can find out detail the restoration process in this video.
Grinder Inforation
Brand - Hitachi
Made in Japan
Type EBC2 CAP 0.2KW AMP'S 4.5
AC VOLTS 100, CYCLES 50/60
LOAD SPEED 3000/3600 rpm
WHEEL SIZE 150mm x 16mm x 12.70mm
I am happy to receive your feedbacks, advices, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
--------------Thank you so much for Likes & Comments-------------- - แนวปฏิบัติและการใช้ชีวิต
First one showed missing parts. Second one was complete. It's a working bench grinder th-cam.com/users/postUgkxxC8HPnl24fu0XhMU_nbmWNEUoK1RMHXk . One thing I like alot is that it's surprisingly quiet. I don't feel like I'm sacrificing any rpms or power for the quietness either. All in all it's a very nice machine. No vibration whatsoever.
Hitachi Koki, I worked there 30 years ago.
Thanks for your restoration.
Maybe it one of yours. Who knows.
すごい！こうしてレストアしてまだ使えるのは日立工機のつくりがしっかりしているのもありますね。
？？？？ 。一''
jifntcuvfjbhkkny
Великолепная работа , приятно смотреть, спасибо !
Friend of the Earth, saving another quality tool that others would scrap or add to a landfill.Great fulfillment in hearing the grinder purr like a well-fed kitten! Only a true craftsman straightens a shaft with one perfectly placed hammer blow!
This restauration is also a big respect to those engineers who made such practicals tools.
Thank you for them.
Machines like these one were made to resist 2 or 3 lives and, with restorations like yours, things will work for more 30 years.
Congrats from Brazil.
Thank you for sharing!
Yo pensé exactamente lo mismo.
30 years? more like 100's of years.
Thanks for not wrecking the ambiance with some crappy music. Legend.
Sphynk oh this is a rare and beautiful thing
Very good work. Nice to have just the sound of the tools, no voice overs or music.
Ditto!
I’m ok with some exposing but no music!
You are like Hand tool rescue. No obnoxious music. No grinding through the metal.
This is not a restoration...
This is Resurrection 😅
Awesome
Anas Obaid ,ooooo,
@@confusciouspuff5701 how about CURE ?
@@preekim6498 ar u crazy? Vaccines do autism wrryyyyyyyy!!!!!1111oneoneone@
That's just beautiful work. Astonishing!
Impeccable work. You have dismantled every part one by one and cleaned them up with great care.
Old stuff brought back to life. Great.
Great job. I like reviving old motorcycles so I can appreciate the work you are doing even more
Worth the effort, as older tools and machinery were built to last by craftspeople. If quality like this is or was available today, you'd be
paying a premium to purchase it.
Jesus! All those parts! I'd finally get it back together, but then think, "Wait. Why do I have a dozen extra parts left over?" 😧 Cool video. Nice job!
Very good Restoration.
I can't believe I watched the whole video and enjoyed every minute of it. Nice work, man!
Awesome work.
me and this SOB are kindered spirits
I love watching these video's they are so calming as well as inspiring!
Watching it is kind of relaxing.
Roland H. My2
Great job!
Those old machines were built to last, unlike this new stuff that's designed to barely reach the end of its warranty.
God bless the people that appreciate old tools and keep Hitachi and Makita running in Japan. Those brands are extremely popular there. People need to look at tool restoration like this. "The tool served you a long and hard life and paid for itself 100 times over. Show some appreciation to what little good craftsmanship we have left, return the favor to the tool. Give it a rebuild."
I HATE
when people throw away electronic gadgets.... Ur channel is great
I'm glad people take the time to do this type of stuff instead of tossing it rendering it "useless"
you tube recommendations are so random sometimes. But I enjoyed this video immensly.
Watching it run again was so satisfying and I learned a thing or two myself. Nice clean work. Keep it up.
great videos as always, thanks. I love watching old tools, come back to life.
So relaxing AND satisfying. love it!
Your confidence with the mallet at the end is inspiring.
I like to watch this videos when i'm high!!
Your restorations and videos are amazing. I'd be very interested in having a "total time spent" line in the description for each project! Also, a quick shot of the products used would be very informative. Was that an enamel primer spray you used over the polyester putty?
I liked the trick of using the marker to check for level. Very clever.
AWESOME! My biggest problem with these restoration projects is I always wind up with a part or two I forgot to put back into the assembly after completion.
Ancel Carter take pictures before you take of a part it should help
Funny story, back in the naughties I was doing tv repair and one of the first Philips flatscreens came my way and needed a new _”light engine”..._ 246 screws of 4 different types later the part was swapped... despite my best efforts the thing worked like a champ with over a hundred screws left over.
orion khan that’s awsome and funny at the same time lol
I was told "I'm curious enough to take it apart skilled enough to put it back together and sneaky enough to hide the extra parts when I'm done" lol
Use a mag tray to hold all the bits as they come off the unit, also, cover the table with a thick towel, so if you drop a small part on the table it will get caught in the material and not skid onto the floor and go down a crack in the floor boards. It happens!
what a very fine restoration for this amazing Japanese machine !!!
Good to see a complicated restoration without use of lathes, milling machines, parts washers, spray booths and the like - just good old craftsmanship!
Thank you so much, I'm happy to hear that :)
usually people just make them all extra rusty on purpose just to make a bigger difference this seemed genuine and awesome work👍
Now this is my kind of ASMR!
Absolutely incredible workmanship my friend. Thanks and regards from Cuba 🇨🇺
now that is a proper restoration every other video i saw, they just prime and paint, and i love the fact you addressed the horrible rust pitting. now it looks perfect
こういうのは古代の遺跡で発掘したアーティファクト感かって観てて楽しい
Замечательно реставрирует, шикарная работа.
Công nhận Việt Nam mình có những youtuber giỏi không thua kém dì người nước ngoài. Đây là người Việt nhe. Ai Vn cho 1 like ạ. Chúc bạn ngày càng thành công.
Great job, thanks for the lesson!
This makes me happy to see a Hitachi power tool being brought back to life. I personally prefer Hitachi over other brands. My coworkers have tried to make fun of my Hitachi tools yet they still run strong as there DeWalt and Milwaukee stuff breaks and burns up.
Nobody made fun of your Hitachi tools. Its all in your head.
@20:33 I love the procedure for “dialing in” the shaft runout. What, no dial indicator? No trouble, just use a sharpie and a BFH! Well done.
Same as below, Ive just watched all of this vid and it was brilliant, a lot of skill and knowledge here, Brilliant Thank You for a fab video.
Because God created people to LIVE AGAIN ❤ everything is possible in this world 💖 THANKS FOR SHARING ! GREAT JOB , THANKS TH-cam CHANNEL ❤
Wow...beautiful. I did have that moment of, “ right,.. how hard could it be...?” 😝
Thanks.
Same here.
Dave Johnson Change your dave to cave pls
@@Lenny-nl1ce "He says what we're all thinking!"
I love seeing old machinery restored, because it will probably outlast anything made in the last 20 years or so. Nothing made these days is built to last. Nice work!
That was unbelievable.. great work...
Thank you very much!
really wow....i wish he explained all the chemical treatments that he did, but this guy should awarded the noble prize of single phase induction motors re-creation....bravo.
I admire the time, effort, patience, and passion put in to this restoration project. Well done! Very satisfying video.
Golden hands dude... Great job, well done! Congratulations!
Amazing piece of work. I was a bit surprised when you approached rust with bare hands instead of gloves. But looks like you have a lot of experience. I was amazed at your skill and knowledge. Hats off to you, sir.
True restoration takes patience, subtlety, and grace. Love it dude....
Nice job. Good restoration, thanks for showing us.
So satisfying to watch video like this.
There is so much garbage on You Tube.
It is an honor to watch your Videos! AWESOME!!!
Ôi thánh là người Việt Nam. Em phục Bác quá.
It must be extremely satisfying to use a power tool you yourself restored.
Yes, I am really like this work.
Good job, bro. How industrious you are!
Thank you!
Wow... And is very quiet, good job.
Great job, very thorough. I did like it when you checked the runout on the shaft, then delicately adjusted it with one thump of the hammer :)
Que maravilla, genio genio, impresionante resultado, sé lo que es hacer un trabajo con ese detalle y precisión,
Felicitaciones !
Nice job, I considered restoring my old bench vice but then decided against it as it was my dads who's not around anymore so I actually kinda prefer the well used look of it.. Plus it still works great like a lot of older tools with good build quality!
I love how you kept the original plates
@20:35 that is a very nice technique on arbor alignment. Almost every video of Gear Show's, I learn something new.
mahusay na trabaho!
One Word WOW . Beautifully done . Lot of Patience .Really Appreciate it . Great
The new bearing liked the hammerslap onto the shaft very much.
This guy is a beast! Absolutely amazing!!
Excellent restore....10 out of 10
hi. I'm from Japan. I've searched this machine. but it is too old and I couldn't find out. thank you for your great restoration.
imagine if someone 60 years from now does a restoration on a hitachi magic wand like this.
Beautiful install! Thanks for sharing.
This dude cold blooded. And highly skilled might I add
Wish there was a little bit words for learning. It's always been a pleasure seeing good hands work.
Man, you and My Mechanics have quickly become 2 of my favorite channels. Keep up the good work!
Thank you for support my work.
@@gear_show Thank you for making such amazing restoration videos
hhhhuggiixytiuhyhhhjju66tuy767ut766776ito7ttt67u77uuii7uuuu66uuuuuu7t6667u7uuuu8677t77576766667777u778876787up877i8u7766767uu76punoi7uu677765i777675o67566767767r7oi67656557677y56676675675676767u756 6q
@@myzcano4343 stroke?
Yeah your videos are very entertaining and satisfying 👍
Thank you! I'm glad you like it.
Your chain is amazing, you have a well equipped workshop and you are a skilled restorer. Those old machines are really treasures of technology and to restore them as new is a pleasant challenge. You are restoring antique appliances and you continuously are touching rusty iron with bare hands, it could harm the skin so you must care of your safety against adverse chemical effects,
Good job and good luck
Amazing job, very satisfying seeing you do your work. 👍🏻
Thank you!
As an Engineer I appreciate the amount of work that went into the restoration. Lot of man hour this would be a $800 bench grinder..
Some things money can't buy ..lol
Ok
I just watched this and now I can go to bed knowing that it's a job well done. It looks and sounds great. Good night.
Very much so has the “my mechanics” feel to it. Awesome job. I couldn’t figure out how to turn on the annotations for this video though...
I`m amazed you know how everything goes back,I`d have a dozen pieces left over!
That's the advantage of recording it for youtube. You can go back on your video and remind yourself !
Years ago I had a Fiat where every time I fixed it that happened.
@@BlueTurfer are you alive tho?
@@zackhunter5646 As far as I can tell
@@BlueTurfer I don't think so
He started with a screwdriver and sandpaper and got all his tools by restoring them. Now he's got another to add to his arsenal.
I know part what is being demonstrated here is that given the right tool, each individual step is simple. But I still can't help thinking that this guy is some kind of genius. Gorgeous work!
I'd give up a toe to have these skills. NICE work.
it really looks better without music!
All mechanical vids are better although the childish idiotic music!
Perfect! is set exactly, man, is really good to work with, and it's just after calibration!
WAWW QUEDO COMO NUEVO.FELICIDADES 100 PUNTOS.
I'm sure that it is better than a new one
Perfect job and I was very interesting while wating this professional work
Another great video as always. Which part is more satisfying to you? Taking stuff apart, or putting it back together?
Excellent work, very well done Sir! Greetings from Southport UK.
Greetings from Siberia Russia too)))
Can watch this all day!!!
Awesome work, you did the perfect restoration, I really appreciate your hard work. sometimes it's not possible to repair spare parts, we have to replace the spare part instead of repair it and you did it. Great.
Awesome work! Great that you can keep track of all those wonky little parts.
If you can't remember where the parts came from, you can use a muffin baking tin, egg crate, etc. number the compartments, and make a list as you go: "#1 screws from grinding wheel cover, #2 name plate screws, etc." Then just reassemble in reverse order.
I hope that you keep it in museum and let you watch your masterpiece. Poland is watching you:)
I love people so much, that give old tools, that are condemned to die, a new love! Brofist. 👊❤
Who give*
Nice to see it done without needing a big dollar lathe and mill.
your restoration is fantastic. someday your channel will be 1 million or more subscribers. keep it up brother !!!
Thank you!
Кккккк
That single precise hit with a simple wooden mallet says pretty much everything about your skill :D You're a magician! Excellent restoration!
Thank you so much!
Otra excelente restauración! Quedó hermosa! 100% operativa y 100% estética. La estética es fundamental para mi. Siempre hay muy buenos trabajos para ver en este canal. Gracias por este vídeo.
Very Impressive. Just restored a 16" drill press myself.