BMW E39 Clutch and Flywheel Replacement DIY (520i, 523i, 525i, 528i, 530i...)
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- Hi guys! How to replace clutch and flywheel without a lift on a BMW E39. One man job, no help and of course no special tools required...basically as always.
Thanks for watching and supporting my content. If you like it, then subscribe, please!
Take care of yourselves, see you soon. Bye
Thank you for a great, no-nonsense overview of the job. Also, seeing the extra 30 seconds taken to chase the threads was nice… a lot of backyarders skip those little steps. Hope the cars giving the owner many more years of enjoyment 👍🏻
Me parece un trabajo fenomenal. Chapeu. Y encima solo y casi sin medios. Eres una luz que nos guía en este camino...... Magnífico.
Simplemente por un comentario así merece la pena el esfuerzo. Muchísimas gracias José Miguel!
Excellent job and excellent video.
Great Video and great Beat 💪😀
Thanks!!
Doing this right now. Its a pain in the ass. But the video is helping alot
Buenísimos videos sobre BMW e39 muchas gracias un saludo
Me alegro que sean de tu interés! Un saludo
Good Job
Ilove bmw e39 thank you for video🤓
thanks amazing video go ahead man , good job
The pre Sept 1997 clutch had a better feel on e39. I bought a 1997 540i 6 new in spring 97 and loved it. Sold it after a few months and missed it.
Went back in 1998 and got a 98….and the clutch had this crappy spongy feel….not as responsive. I hated that clutch.
Give me the non self adjusting one all day.
What's the reason for replacing the flywheel?
Great Job! Love it when I see someone who takes care of a E39 with the 6-cylinder engine!
Thanks! Sincerely, I replaced it just for preventative mainteneance.
gracias a ti voy a poder cambiar el embrague al mio,raro que tenga tan pocas visitas:D
Me alegro mucho de que sirva de ayuda!
EXCELENTE TRABAJO, gracias por compartir tu conocimiento.
Tengo una pregunta, si me pudieras apoyar te lo agradeceria bastante.
El cojinete piloto cual es la numeración?
Le estoy cambiando el cluth al mio es un 530i modelo 2004
El inconveniente es que le hicieron conversión y no le pusieron cojinete piloto y se averio la caja, agradeceria tu ayuda bro. Estoy en aprietos por esta citación
La referencia original del recambio es 21517521471 cojinete de desembrague. Espero sirva de ayuda.
Gracias a ti por comentar, saludos.
Love the video thanks so much, plan on doing my own soon. Also what was the music?
Thank you too Michael for commenting! Music: God fury - Slyrax 👍🏻
@@TheultimateDIYmachine no problem, can I ask what clutch and flywheel you went with. Did you go OEM? I’m looking into them now for my manual touring
Factory was Luk, so I installed a Luk clutch kit. No complaints at all
Buenas una pregunta que util usaste para centrar el embrague al ponerlo ? Es decir con que lo hiciste , y el cojinete de empuje que refería es el mio de Luk nuevo tiene mas juego que el tuyo y me preocupa si esta mal o no
Buenas! El útil para centrar me lo fabriqué yo a partir de un vaso con punta torx que tenía. Del otro asunto, no recuerdo la referencia, venía con el kit completo que compré (embrague, con bimasa y cojinete).
Hey man, great video.
Do you happen to have links to all of the parts? Specifically the smaller ones?
Bravissimo 💪💪💪💪💪💪💪
Do you remember the size of the socket used on the crankshaft pulley?
Yes, that’s for sure 22 mm!
Good Job !!!
how much does it weight?The dual mass flywheel?
11.29 Kg
Hey, what happens if i take that middle shit out which is holding te fingers and then put all on and center it in my way.. will it work?
What flywheel is that? I've got a LuK flywheel and a Sachs clutch kit, it's a no go, the flywheel has a ridge that interferes with the Sachs disc.
I buyed a complete Luk clutch kit (flywheel included) and that’s the way to go. Otherwise vibrations, noises and installation problems might happen.
Tea faltado acerle el cambio de aceite valvulina pa Acerlo completo completo
Pues se lo cambié, lo que pasa es que no lo muestro en este vídeo, porque ya tengo un vídeo específico en mi canal, donde muestro cómo se hace el cambio de la valvulina. De todas formas, gracias por comentar!
C’est la même sur un 530 d e39 manuelle ?
Je ne sais pas.
hola amigo con que limpias el embrague el bimasa y el plato de presion .un saludo
Con papel de cocina y spray limpafrenos a mi me sirvió. Creo que lo ideal es alcohol isopropilico, pero yo no tenía a mano y usé lo anterior. Gracias por tu comentario!
@@TheultimateDIYmachine gracias por la respuesta amigo un saludo desde galicia cualquier duda consulta tengo 325i e46 325 e36 530d
Cual es la referencia del pitorro de plastico del empujador
21511223328
@@TheultimateDIYmachine muchas gracias
hey do you remember the size of the flywheel bolts?
M12X1,5X50
Stock clutch? Is this an M50?
Yes, stock clutch. M54
Mismo procesor para un 530d ?
Básicamente
@@TheultimateDIYmachine recomiendas cambiar el volante de inercia siempre ? O si esta mas o menos bien, ponerle solo el disco y demas nuevo
@@TheultimateDIYmachine luk es la marca que traen de origen ?
Siempre no, depende del estado en el que se encuentre, holguras y demás…
Juraría que sí, por eso yo le instalé el kit de Luk
Do you remember the part number for the kit you purchased?
Luk BR 0241
600 0187 00
Thank you!!
👍🏼
Hola, me gustaría hacerte una pregunta? Yo llevé mi carro a un mecánico para ponerle el kit de cloche, se lo pusieron pero no me esta cogiendo los cambios y para poder lograr coger el cambio tengo que darle hasta abajo al pedal, que podría ser el problema? Espero la respuesta si puedes. Gracias
Hola, si antes de llevarlo al mecánico no lo hacía, es que probablemente te han instalado algo mal 👎🏼 Vuelve a llevárselo a que te lo revisen o cambia de mecánico!
👍👍👍👍👍👍😎😎
How many miles on this clutch?
180.000 miles.
@@TheultimateDIYmachine wow that's cool. I'm currently at 152k and looking to tackle this job. Great video!