For anyone else having trouble SCANNING QR CODE, try putting your phone on AIRPLANE MODE. Worked for me 👍 Save yourself the headache.. "ready to connect..ready to connect.. ready to connect"
You haven't finished the complete setting yet, what a but motion setting? and testing if the motion detected to record the detected item ? my camera doesn't detect at all, is it defective?
I already tried everything to connect my Wyze Camera V3 but it didn’t work. The camera just don’t scan the QR code. Following the Wyze troubleshooting website, I sent the Wyze app QR screen to them via Twitter. I already tried a hard reset. Do you think I have a defective unit?
Yes, this needs wifi to work. The Wyze cam outdoor has a travel mode which does not need wifi if that is what you are looking for: th-cam.com/video/4686czvqF0o/w-d-xo.html
Your wifi at home can be 2.4ghz or 5ghz. If you have a wifi router that can have different names for 2.4 and 5, you would look the the name of the 2.4 option to connect to.
I have two of the original old school first model Wyze cameras and now two v3. 4 cameras total with the old ones still sending me notifications and the v3 won’t send me any notifications. They we all installed properly and they do work I just can’t get any notifications from the brand new v3. Any thoughts or ideas and yes the notification are turned on in the app.
Do you have motion zones setup? Have you increased the detection sensitivity? Are you using this with a campus subscription? Is the camera recording events and it is just not pushing the notification?
My Cam V3 keeping saying "Ready to connect" for couple of minutes and never finish connect it --I'm going to return it and buy another product that work.
Were you connecting to a 2.4ghz network? Also did you try moving it closer to your Wifi access point? Some times if just needs to be a little closer for setup.
@@Wanderer001_Reviews_Clips @Wanderer001 Reviews Clips Please help me, I am not able to set-up my Wyze cam V3, after scanning the Qr it says, Cannot find the specific network name and later it says Cannot connect to the local network, I tried from another devices, tried resetting also but it didn't work, please help me
I've got 3 Arlo cameras that will no longer be supported unless I pay a subscription fee. I want to avoid subscription fees. Will these be a good replacement without having to pay a subscription fee?
@@Wanderer001_Reviews_Clips Thanks for your reply. Do you have any model numbers for the eufy or Reolink you recommend? I already have mirco-usb wires running to my three arlo cameras (because I hated climbing on a ladder to recharge the batteries), so perhaps I could use existing micro-usb to power any new cameras. But, really I could re-route any new power lines to the wifi cameras if needed. Thank you.
@@Wanderer001_Reviews_Clips Outdoor. And I'm hoping to get one where I don't have to worry about the manufacturer sunsetting the system like Arlo did to me. Thanks.
@@brianw6645 With outdoor cameras I mostly have used eufy battery powered outdoor cameras like: amzn.to/3Jy3gQp, and amzn.to/3F7zHm0. As for reolink I have only used their indoor cameras, however, @lifehackster has done a lot of the reolink outdoor cameras. These are also wired options which sounds more like the current set up you have. You can see more info about them here: th-cam.com/users/results?search_query=lifehackster+reolink. Hope this helps you out.
well that's stupid then.... Only the phone is on the WiFi. What if you leave home with your phone? Does the camera disconnect?? I need a camera for when.I leave to work
You are using the phone as a bridge during setup to get the camera on your home wifi. Once that is done the phone does not need to be around for the camera to work. You can be away from home and still view the camera feed.
Yes that is correct. The V3 needs to be plugged into a power source in order to work. If you are looking for one that will work without power I would recommend checking out the outdoor cam: th-cam.com/video/4686czvqF0o/w-d-xo.html.
@@Wanderer001_Reviews_Clips yea I realised that. Everything online made it seem like it had a chargeable battery and wasn’t wired that’s why I was confused
Hey I see you're still responding to comments so I hope you can help me 😅. I got a v3 and got it setup perfectly with no issues. I just wanted to see if I could set it up so when I did I unplugged it and moved it to the location I wanted it in. All of a sudden it just doesn't connect to my wifi. I reset the v3 my phone and wifi and it still doesn't connect. Help?
@@Wanderer001_Reviews_Clips it's really good I tested it. But after resetting my router a second time I found out the V3 ends up connecting again. But the problem reccures after I unplug the V3 and when on overnight. I have to keep resetting my router to just use the camera. Thoughts? Or any recommendations of other plug in cameras
@@VictorRodriguez-dv5vg Check for firmware update for the V3 make sure that it is up to date. Test having the camera over night closer to the main access point see if the same issue happens if it does could be a bad unit, if that is the case you could try for a replacement. If you don't want to go that road I have tested another brand eufy which I really like as well: th-cam.com/video/kOyVY5U7JAY/w-d-xo.html.
That would be because this is a clip from the full review on my main review channel which can be seen here: th-cam.com/video/1oN4fU72R0s/w-d-xo.htmlsi=IZEchBMuUWzej79f
@@Wanderer001_Reviews_Clips Please help me, I am not able to set-up my Wyze cam V3, after scanning the Qr it says, Cannot find the specific network name and later it says Cannot connect to the local network, I tried from another devices, tried resetting also but it didn't work, please help me
Everything was connecting great until I put the wrong password and I restarted all over again I connected it the red light flashes but it doesn’t say ready to connect no more after pressing setup
You might want to try powering it down for a few hours then blugging it back in and trying. Some times the memory of a device like this can act "oddly" and just needs a time out to collect itself.
@@rcat1971 Might be a defective unit. Might be worth reaching out to their help team and see if there is something they can offer you. I am at a loss: support.wyze.com/hc/en-us
Apparently it is because if u gave 5ghz wifi or whatever, it won't connect to it. Has to be not 5ghz. Isn't most speeds 5g? Ummm so this company needs to make it compatible cuz this is a pain and bs. Total bs. Doesn't scan code. Won't connect to wifi. Big epic FAIL ! returning the crap!
I've had this happen too. To help it make that first initial connection I moved it closer to my Wi-Fi access point and made sure any devices that may be on Wi-Fi or disconnected during the setup process.
Most smart home cameras make you create an account as a way of keeping the video "secure" this way it is all kept behind a password. That keeps anyone from just walking by and syncing up to your cameras over bluetooth.
Apparently it is because if u gave 5ghz wifi or whatever, it won't connect to it. Has to be not 5ghz. Isn't most speeds 5g? Ummm so this company needs to make it compatible cuz this is a pain and bs. Total bs. Doesn't scan code. Won't connect to wifi. Big epic FAIL ! returning the crap!
5ghz does have faster speeds but it also has shorter range and can not pass through wall as good as 2.4ghz can. I admit it would be nice to have the option for both, but then that would make this more expensive as well having to have the extra wifi antenna support.
“5g” isn’t the same as Ghz…… You’re trying to compare cellular speeds versus radio frequency bands. There is a huge difference. Do a little googling and educate yourself.
I was looking for an outdoor camera to keep an eye on my dogs in the yard when I'm not home. th-cam.com/users/postUgkxOXxsTZ3ptV_Pk0fFl8bNZvVqeoqBQFwe Tried a different one that was absolutely terrible, so I got these instead. They work perfectly! With 3 of these cameras I can see every corner of the yard, and they were very easy to set up. The best part is I only get the footage I want to see, not hours of videos of the bird feeder swaying in the breeze.
For anyone else having trouble SCANNING QR CODE, try putting your phone on AIRPLANE MODE. Worked for me 👍 Save yourself the headache.. "ready to connect..ready to connect.. ready to connect"
Nevermind, that only worked for the 1st camera I set up. This is just garbage.
Thank you for sharing, it was so easy to set up & this video was very helpful.
You haven't finished the complete setting yet, what a but motion setting? and testing if the motion detected to record the detected item ? my camera doesn't detect at all, is it defective?
This was how to set it up, what you are describing I cover in the app video here: th-cam.com/video/5sW6kjTCzpk/w-d-xo.html
I already tried everything to connect my Wyze Camera V3 but it didn’t work. The camera just don’t scan the QR code. Following the Wyze troubleshooting website, I sent the Wyze app QR screen to them via Twitter. I already tried a hard reset. Do you think I have a defective unit?
It does sound like a possibility. Do you have a screen protector on your phone?
@@Wanderer001_Reviews_Clips i tried with on and off and it won’t work help
@@kaylinruiz2369 Have you tired a hard reset of the Wyze camera yet?
Great video! Thank you. My network is 5GHz will the camera still work for me.
Sorry, 2.4Ghz only.
Is thee video cámara connected only to my smart phone? Or also yo my home wifi? I didn't get when you said thatbis asking for the wifi code?
Now internet Is 5g snd I recently get this video cámara 2 eres ago
I don't have or want wifi, can the wyze v3 camera be used at all?
Yes, this needs wifi to work. The Wyze cam outdoor has a travel mode which does not need wifi if that is what you are looking for: th-cam.com/video/4686czvqF0o/w-d-xo.html
It says it doesn't connect to 5G networks so I wondering how do I figure that out is there a way
Your wifi at home can be 2.4ghz or 5ghz. If you have a wifi router that can have different names for 2.4 and 5, you would look the the name of the 2.4 option to connect to.
Can't get mine to scan the QR code. Just keeps saying ready to scan! When it's pointed at it!
Do you have a screen protector on the phone? Depending on the type it could interfere.
@@Wanderer001_Reviews_Clips No my phone does not have a screen protector
Take off the screen sticker from camera dummy
^
@@mercedesrichardson243 Did you solve the issue yet, or still in there?
It saying network issues for me and I don’t have a 5hz thing ima just trash the cam
I have two of the original old school first model Wyze cameras and now two v3. 4 cameras total with the old ones still sending me notifications and the v3 won’t send me any notifications. They we all installed properly and they do work I just can’t get any notifications from the brand new v3. Any thoughts or ideas and yes the notification are turned on in the app.
Do you have motion zones setup? Have you increased the detection sensitivity? Are you using this with a campus subscription? Is the camera recording events and it is just not pushing the notification?
@@Wanderer001_Reviews_Clips it was the event recording that was turned off so thank you very much I appreciate it
@@mikevollmer3579 Happy I was able to help.
Ready to connect ….Ready to connect ….Ready to connect ….Ready to connect 25 years later still Ready to connect
Follow the instructions. Follow the instructions. Follow the instructions. Follow the instructions. Follow the instructions.
Yep right in the trash... Did you find anything that really works?
@@iamnobody9001 20 times tried. Waste of money for this. Now it says something about simcard. Lol find something else
Do I need to have wifi in order to connect the camera
Yes.
I am having trouble connecting my cable got changed so it won’t scan the barcode
Screen protector was my issue for the QR code scan! Thanks for the help
what is the longest USB cable you can use successfully? since there is no wireless way using solar or batteries - I need to run a cord about 50 ft.
To be honest I am not sure. But I don't see it as being an issue.
I use a 26ft no problem
Why do you want a 50 ft USB cable for? Go buy a 50 ft long AC extension cord at Home Depot and plug your camera at the very end.
My Cam V3 keeping saying "Ready to connect" for couple of minutes and never finish connect it --I'm going to return it and buy another product that work.
Were you connecting to a 2.4ghz network? Also did you try moving it closer to your Wifi access point? Some times if just needs to be a little closer for setup.
Wow.. amazing. You’re able to scan the QR Code with NO issues
With the V3 I was other wyze products I have had issues.
@@Wanderer001_Reviews_Clips I had to point the camera up and hold my phone about 5 inches. This was after like an hour of trying
@@pwnagraphic690 Wow that's just crazy.
@@pwnagraphic690 I am going to try it because I am getting nowhere after soooo many trys.
@@Wanderer001_Reviews_Clips @Wanderer001 Reviews Clips Please help me, I am not able to set-up my Wyze cam V3, after scanning the Qr it says, Cannot find the specific network name and later it says Cannot connect to the local network, I tried from another devices, tried resetting also but it didn't work, please help me
I am having trouble with the camera racing the QR code. What to I do?
Apple or android phone?
Pointed at the QR code and it should scan just fine. You may have to move the phone a little farther away from it forward to read it but it will read.
Never got it to scan code... Going on 4 months 15 different phones to test
I've got 3 Arlo cameras that will no longer be supported unless I pay a subscription fee. I want to avoid subscription fees. Will these be a good replacement without having to pay a subscription fee?
Honestly of the ones I have tested you are looking at eufy, or Reolink to have things like person detection without a subscription.
@@Wanderer001_Reviews_Clips Thanks for your reply. Do you have any model numbers for the eufy or Reolink you recommend? I already have mirco-usb wires running to my three arlo cameras (because I hated climbing on a ladder to recharge the batteries), so perhaps I could use existing micro-usb to power any new cameras. But, really I could re-route any new power lines to the wifi cameras if needed. Thank you.
@@brianw6645 So you are looking for outdoor cameras or indoor cameras?
@@Wanderer001_Reviews_Clips Outdoor. And I'm hoping to get one where I don't have to worry about the manufacturer sunsetting the system like Arlo did to me. Thanks.
@@brianw6645 With outdoor cameras I mostly have used eufy battery powered outdoor cameras like: amzn.to/3Jy3gQp, and amzn.to/3F7zHm0. As for reolink I have only used their indoor cameras, however, @lifehackster has done a lot of the reolink outdoor cameras. These are also wired options which sounds more like the current set up you have. You can see more info about them here: th-cam.com/users/results?search_query=lifehackster+reolink. Hope this helps you out.
you said in beginning person needs Wyze Cam V3 app and account are these free ty
Both the Wyze app and Wyze account are free.
@@Wanderer001_Reviews_Clips TY SIR for replying she wants to get 2 camera setup
HAGD
well that's stupid then.... Only the phone is on the WiFi. What if you leave home with your phone? Does the camera disconnect?? I need a camera for when.I leave to work
You are using the phone as a bridge during setup to get the camera on your home wifi. Once that is done the phone does not need to be around for the camera to work. You can be away from home and still view the camera feed.
We just got this and it doesn’t work without being plugged into the wall. Is it supposed to be like that? It turns off when unplugged
Yes that is correct. The V3 needs to be plugged into a power source in order to work. If you are looking for one that will work without power I would recommend checking out the outdoor cam: th-cam.com/video/4686czvqF0o/w-d-xo.html.
@@Wanderer001_Reviews_Clips yea I realised that. Everything online made it seem like it had a chargeable battery and wasn’t wired that’s why I was confused
Does it have pc software?
Mobil app or web only right now.
@@Wanderer001_Reviews_Clips RIP
Hey I see you're still responding to comments so I hope you can help me 😅. I got a v3 and got it setup perfectly with no issues. I just wanted to see if I could set it up so when I did I unplugged it and moved it to the location I wanted it in. All of a sudden it just doesn't connect to my wifi. I reset the v3 my phone and wifi and it still doesn't connect. Help?
How is the wifi signal where you moved the camera?
@@Wanderer001_Reviews_Clips it's really good I tested it. But after resetting my router a second time I found out the V3 ends up connecting again. But the problem reccures after I unplug the V3 and when on overnight. I have to keep resetting my router to just use the camera. Thoughts? Or any recommendations of other plug in cameras
@@VictorRodriguez-dv5vg Check for firmware update for the V3 make sure that it is up to date. Test having the camera over night closer to the main access point see if the same issue happens if it does could be a bad unit, if that is the case you could try for a replacement. If you don't want to go that road I have tested another brand eufy which I really like as well: th-cam.com/video/kOyVY5U7JAY/w-d-xo.html.
Please comment on the network entry. ???
Not sure I understand what you are looking for help with.
@@Wanderer001_Reviews_Clips After looking again I see a dropdown box with my network number, no prob, got it thanks.
What is the voltage
Input is 100 to 240 volt. Watt usage is 1.7
Can I use it on a hotels wifi? Can I use it under a hotels wifi? That was the whole point of buying it, to see if anyone enters my room. Ty
Yes, as long as you have the network name and password.
Can I use this outside the US and view from my phone in the US ?
I can not say for sure as I have not tired myself, but in theory yes it should.
Why not demonstrate the function of the V3 FCOL.
That would be because this is a clip from the full review on my main review channel which can be seen here: th-cam.com/video/1oN4fU72R0s/w-d-xo.htmlsi=IZEchBMuUWzej79f
You don’t need a hub with this one?
It does not.
Don’t know Whitch the looks app to download
play.google.com/store/apps/details?id=com.hualai&hl=en_US, or apps.apple.com/us/app/wyze/id1288415553. Depending on which smartphone you use.
So I do need the base station? If so can one base station covers more than one cameras?
This is not required base station. It camera acts as a standalone device.
@@Wanderer001_Reviews_Clips Please help me, I am not able to set-up my Wyze cam V3, after scanning the Qr it says, Cannot find the specific network name and later it says Cannot connect to the local network, I tried from another devices, tried resetting also but it didn't work, please help me
Everything was connecting great until I put the wrong password and I restarted all over again I connected it the red light flashes but it doesn’t say ready to connect no more after pressing setup
You might want to try powering it down for a few hours then blugging it back in and trying. Some times the memory of a device like this can act "oddly" and just needs a time out to collect itself.
How to i view my cameras on my laptop ?
You can not. This camera will only work with app on your phone.
Thank you. Very Helpful.
in canada if you buy in amazon has no warranty
Can't scan the QR code
Some times can be an issue if your phone has a screen protector. Try maxing out the screen brightness.
Mine won’t scan
Do you have a screen protector on your phone?
@@Wanderer001_Reviews_Clips no
@@rcat1971 Screen brightness all the way up?
@@Wanderer001_Reviews_Clips yup
@@rcat1971 Might be a defective unit. Might be worth reaching out to their help team and see if there is something they can offer you. I am at a loss: support.wyze.com/hc/en-us
Mines doesn't want to connect with my wifi.
Are you trying to access 2.4ghz network or 5ghz? The camera will only work on the first.
@@Wanderer001_Reviews_Clips it's a TMobile wifi box that I have.
@@generalelectric8403 Not sure I am know of that one.
Wow!!! Thanks man
Happy to help.
Thank you This is a great helpm
Nice 👍
I’ve been trying to set up for 5 days! I even replaced the V3!! Still won’t scan!
Android or IOS? Does the phone have a screen protector? Just trying to figure out what could be causing the issue.
I had that problem and found that I couldn't turn off my phones 4g.. So I put it on Airplane made and it immediately connected.
Apparently it is because if u gave 5ghz wifi or whatever, it won't connect to it. Has to be not 5ghz. Isn't most speeds 5g? Ummm so this company needs to make it compatible cuz this is a pain and bs. Total bs. Doesn't scan code. Won't connect to wifi. Big epic FAIL ! returning the crap!
Does the base station have to be plugged into the router or is it a wireless connection?
The V3 does not have a base station it connection to your WiFi all on its own.
Big waste of money. I had two they both froze on review and they are stuck and wont do anything. Offline/error 90.
It works only with USA numbers
Canadians dont buy Wyze3 from amazon, they dont offer warranty in canada
No can do QR scan, it's pre-made on screen. This sucks
Please I need help,mine is not connecting, it's said connection failed
I've had this happen too. To help it make that first initial connection I moved it closer to my Wi-Fi access point and made sure any devices that may be on Wi-Fi or disconnected during the setup process.
Why do you need an account for everything. This should be as easy as bluetooth headphones.
Most smart home cameras make you create an account as a way of keeping the video "secure" this way it is all kept behind a password. That keeps anyone from just walking by and syncing up to your cameras over bluetooth.
But the app is a crap 💩 I don’t have the option to sing in
Andorid or iOS?
Davis George Johnson Timothy White Anthony
Apparently it is because if u gave 5ghz wifi or whatever, it won't connect to it. Has to be not 5ghz. Isn't most speeds 5g? Ummm so this company needs to make it compatible cuz this is a pain and bs. Total bs. Doesn't scan code. Won't connect to wifi. Big epic FAIL ! returning the crap!
5ghz does have faster speeds but it also has shorter range and can not pass through wall as good as 2.4ghz can. I admit it would be nice to have the option for both, but then that would make this more expensive as well having to have the extra wifi antenna support.
“5g” isn’t the same as Ghz……
You’re trying to compare cellular speeds versus radio frequency bands. There is a huge difference. Do a little googling and educate yourself.
What about people without wifi?
This camera requiers wifi to work.
@@Wanderer001_Reviews_Clips and credit card
@@Julian8219Alvarez I get not liking that part. I generally use a digital credit card for these types of things and just put max charge of $1 on it.
I was looking for an outdoor camera to keep an eye on my dogs in the yard when I'm not home. th-cam.com/users/postUgkxOXxsTZ3ptV_Pk0fFl8bNZvVqeoqBQFwe Tried a different one that was absolutely terrible, so I got these instead. They work perfectly! With 3 of these cameras I can see every corner of the yard, and they were very easy to set up. The best part is I only get the footage I want to see, not hours of videos of the bird feeder swaying in the breeze.
es bastante agradable