Hello. In the case of 8 lithium batteries 100 amps each, total 800 amps, what would be the recommended BMS? 500 or 1000? I would also need 2x Distributors for the batteries, right? Is it possible to use the M8 distributors for this bateries with the BMS 1000 (M10)? thanks !!
The load of the system not the combined battery capacity is what you would use. You can wire the batteries to 2 distributors or you can wire them all in parallel using jumpers. Either works. Depends on your space available
@@FreedomVanGo Thanks for the answer. There are still doubts about which model to buy. BMS 500 or 1000? Distributors with M8 or M10? What do you think?
Hello and good for the video I wanted to ask you if it is possible to install the bms from victron (16S for a packlife that I have in 48 volts? 600AH)? or do you have to have a victron battery? my batteries are EVE 280AH in 16/2P can we wire all the batteries with the bms from victron or do we need a bms compatible with the victron? otherwise is it possible if there is no can in the battery pack to tell victron (multiplus and cerbo GX) that I have a lead gel battery pack? there is no bms on the lead in general? my pack can be protected by its own BMS cutoff 2.80 volts and maximum charge at 3.65 volts Possibly just to emit more or less on the multiplus? thank you laurent
Hello. In the case of 8 lithium batteries 100 amps each, total 800 amps, what would be the recommended BMS? 500 or 1000? I would also need 2x Distributors for the batteries, right?
Is it possible to use the M8 distributors for this bateries with the BMS 1000 (M10)? thanks !!
The load of the system not the combined battery capacity is what you would use.
You can wire the batteries to 2 distributors or you can wire them all in parallel using jumpers. Either works. Depends on your space available
@@FreedomVanGo Thanks for the answer. There are still doubts about which model to buy. BMS 500 or 1000? Distributors with M8 or M10? What do you think?
@@mkexpeditions I dont know your system amperage load so I can’t answer that question.
I use M8 personally.
Hello and good for the video
I wanted to ask you if it is possible to install the bms from victron (16S for a packlife that I have in 48 volts? 600AH)?
or do you have to have a victron battery?
my batteries are EVE 280AH in 16/2P
can we wire all the batteries with the bms from victron or do we need a bms compatible with the victron?
otherwise is it possible if there is no can in the battery pack to tell victron (multiplus and cerbo GX) that I have a lead gel battery pack?
there is no bms on the lead in general?
my pack can be protected by its own BMS cutoff 2.80 volts and maximum charge at 3.65 volts Possibly just to emit more or less on the multiplus?
thank you
laurent
whats the difference between this and the 1000a?
About 500a capability
Is it a contractor or are the using FETs for the switch?
Contactor! Makes a heck of a closing noise too. Very satisfying