2005 Ford Escape P0452 Fuel Tank Pressure Sensor: Fixing Fords Across America
ฝัง
- เผยแพร่เมื่อ 15 ส.ค. 2015
- You can check these same PIDS on your vehicle on the cheap with this software and wireless adapter:
Forscan Software:
forscan.org/
ELM 327 Adapter:
www.amazon.com/gp/product/B00U...
At this stop on the tour in Northern California we check to see why the 2005 Ford Escape is setting a P0452 code.
Help the Tour along by donating below:
GoFundMe Here- www.gofundme.com/FordTechMakuloco
Paypal Donations Here- www.paypal.com/cgi-bin/webscr...
Tour supporters include:
AJ1E Superior Solutions-
www.fordservoboretransmissionf...
Hot Shot's Secret-
www.hotshotsecret.com/
Milwaukee Tools-
www.milwaukeetool.com/ - ยานยนต์และพาหนะ
Thanks for videos very helpful. Have you seen a upper rad hose get flat like suck closed. Tring to trouble shoot..
What would you do if it was reading low like 2.2-2.3? Thanks for the video.
Thank's so much tech.
Ford Escape 2004, same problem. Everything looks good, checked the signal voltage by jumping the wires and using a voltmeter, P0452 showed up last March, I cleared it after checking everything and now it's back again in December.
Could the temperature be affecting the sensor performance? Or could there be a leak in the vacuum line, perhaps exacerbated by the cold? It is a 12 year old car. Tank vent solenoid is also working and vent is all good and clear. Hmmm.
Thanks for the video! I have a P0190 with P0302. Autozone is recommending I replace the fuel tank pressure sensor before going the spark plug route. Anything to note for the sensor replacement itself? The part comes with the new hoses. Do I need those or can I just attach the sensor to existing without exacerbating anything?
I have a p0451 code on my 04 f150. On one of your videos you mentioned that when you first go to check them the voltage should stay about 2.6-2.7 on the FTP sensor. Mine is in the line above the tank. Most of them plug into the tank. Can you tell me if most of the FTP sensors for ford work the same with the same pressures verses voltage so that I could tee into the same line the factory on come in and adapt a tank type to the tee and be all good? The replacement comes with all the lines and runs about 350.00 and the tank type come by themselves. Thanks for any information you can provide. Thanks for the video.
makuloco , this is the same suv the I have, the one with the code p0453 FTP , IF I disconnect the lines of the pump and I turn on the ignition, it should spray gasoline out ? please which pin is the hot 12v or which pin should I use to throw power to see if the pump is working please bro I'm lost
Great tip..
fordtechmarkuloco , I have check engine light on and I put my Maxidas ds708 and I have a p0432 and I erase the code and I try to start the car and nothing didn't start it cranks but won't start please give me some advices
I have a 2004 Ford F-150 four-wheel drive 5.4 l XLT and I need a fuel tank pressure sensor when I go to any parts store or even online the pressure sensor they have plugs into the tank and the sensor that's on the truck has a hose on each end and IT out of the tank so how can I find the pressure sensor for this truck.
Trying to figure out why i don't have a hissing sound anymore when i open my gas cap now, use to have a hiss sound since i bought it which ive had for 10 years now, can't figure out the problem wondering if could be this?
My 2008 MKZ will not start, after a P0463 code. This happened after a ABS recall. Don't think it had anything to do with the start problem. All fuses good, relays good, fuel shut off switch good, cant hear the pump working. No power to fuel pump connecter. What else should I look for? Does the fuel tank, pressure transducer sensor be the problem?
How do you replace the valve? It seems to have crimped plastic fuel hoses/vent hoses. Please help thanks!
I have a 2008 ford escape hybrid that is calling up a p2418 code I can't found out on how to fix it please help....
Hello I have a 2006 ford escape, when I drive a few minutes after it goes out, I changed the pump and it works a few days after the same breakdown comes back, in full traffic the engine stops I did it Scan I have code P043, what should I do?🙏🙏🙏
@2:51 might have plugged up the reference side with dielectric? I suppose too much could do that but I've just never seen that be the culprit. Have you seen that happen before?
had that happen on my alternator plug on my 96 F350 powerstroke
How often would you recommend changing the "lifetime" air filter on a '12 fusion hybrid it only has 31k on it now. Thanks
+12FFHybrid I would replace it every 100k normally or every 60k in dusty situations.
Ok I guess I'll get it done when I get the transmission serviced. Thank you
I have a Ford Fiesta 2013 that does not allow me to add fuel. I have to keep pushing fuel in even though it acts as if it was full. I heard it may be a vent. Do you have any videos on how to check for clogged vents?
+MAX IVULICH No videos on this but usually the canister vent valve that is clogged.
2006tarusfuel pump install ,how two????
excuseme tech what kind of pc scanner are you using.
I used the Ford IDS scan tool
my 2005 expedition fuel tank takes time to fill gas every second gas station pump handle stops, I trust your answer please help. tnx
2005 FORD EXPEDITION WITH P0452 CODE, FOR FUEL PRESSURE SENSOR SIGNAL TOO LOW, NO PRESSURE SENSOR ON THIS VEHICLE, ONLY VENT SOLENOID VALVE, REPLACED AND CODE RETURNED, HAVEN'T FOUND ANY INFO. FOR THIS VEHICLE. NEED SOME HELP PLEASE.
i have this same ford escape and it has a knocking sound in the gas tank when u turn the key to activate the fuel pump. ive changed the fuel pump and the knocking noise remained even when vehicle running.....does anyone know what this might be. and as well the check engine light came on as soon as the knocking sound originally started. could it be air coming back to the tank somehow causing it to sound like a knocking noise? any help would be greatly appreciated it also caused the vehicle to stall a couple times. thank you
^ years ago, sorry no one knew the prob. Did you find out what the knock sound was ???
I have a problem my sensor fuel is not going downwards to get me empty.but stay at the first shift.while if I put fuel it goes upward
And the car is 2007 ford mustang
Did someone rig that pressure sensor? It has a lot of goop around it.
+Guy Ko Yes owner did to eliminate any leaks from all hoses in the evap system.
I have a P0453...do u have a vid for this code? I know its related
+Chuck Ross This code simply means the voltage on the signal line is above 4.5 volts at all times. This can be cause by an internal short or a short to vpwr but most of the time it is caused by and open in the circuit. You will have to ohm out and then load test each of the three wires between the pcm and fuel tank pressure sensor.
Can i access it without stopping the tank?
What about code p0451 what part do I need I have a 2010 ford focus
I’m getting the same code on my focus. What ended up being your resolution?
Ford fusion 2012 tank preasure measurement
Bummer, title makes it seem as if you are replacing the FTP Sensor and in the first minute you state "he already replaced". :(
Any video on how to actually replace it?
Yeah, titles reminds me of click bait, but he did show where it's located, which is always good to know, once I see it, I'll know how to replace it...it's called mechanics 101...btw, if all you have to do is apply a little dielectric grease to the plug and clean any corrosion off, then you may not have to replace it..
Would it be the same for a 2012
yes
Ours happens when cold
How does this sensor affect driveability ?
It doesn't.
@@FordTechMakuloco ahhh, ok. Because I posted on fb inquiring what would cause a hesitation from 0 MPH. no misfires, no skipping, no check engine light. This 2005 Escape is just a total dog, completely bogged down from 0 MPH to 25 MPH. I suspect clogged Catalytic converter, binding torque converter or lock up clutch, or bad EGR valve. And this guy chimes in on my post suggesting that this fuel tank pressure sensor could cause this slugging behavior.
nope
Is it likely that a P1450 Unable to Bleed code be caused by a bad fuel tank pressure sensor?
+AhPhoey no that is almost always a canister purge valve on newer Fords.
I have a 2005 Ford Escape. By canister purge valve, you mean the purge valve in the engine compartment or the canister vent valve by the fuel tank?
FordTechMakuloco I have a 05 Lincoln Navigator and I get the p1450 code...change the purge valve and the solenoid and still getting the check engine light and the p1450 code...any help please
@@JoseRodriguez-vw5mo did you ever find the problem???
@@productive23 yes...I change the fuel tank pressure that goes on top of the tank
Way too much background noise I couldn’t watch it sorry I really need the info
Great video! As a side note the barking dog is a distraction and should not be a part of a presentation.
Are you serious? I was on tour across America helping those that are less fortunate. I come to their house and have no control over a dog.
FordTechMakuloco It was not meant to be personal. Bless you for doing great work. I just couldn't focus on the content because of the barking. Sorry.
@@FordTechMakuloco i could really use some help with my 2012 focus titanium hatchback. The dealership is treating me real badly. Said my motor siezed up yet they also drove it. Makes no sense to me. I have no one In the entire world to help me. Please help me.
Wtf is this video for ?
I have a 2005 Ford escape it runs for a while then stalls out what should we try