Halving then quartering a standard sheet of sandpaper evenly can be fitted on any of the quarter sheet sanders. A half sheet folded in thirds is SOP in the paint trade working well for those who have small as well as large hands. The DIY ad/infomercials make it look as if there are just a few types of abrasive papers. Not so!
I'm so blown away by the way you organize your sandpaper! Instructions are so simple and lots of tips on going in the direction of the wood grain, brushes, applying coats etc.
I just had to come back and tell you that I refinished my kitchen cabinets (all 54 of them) and I did it every step that you showed in this video; except that I used a stain without the Polyurethane. I did the stain first then applied the Polyurethane separate after the stain. My cabinets turned out looking brand new! I am so glad that I found your video, it helped me so much. Thank you.
@@rachelburright1582 when I went to Home Depot to buy my stain and polyurethane I talked to the gentleman that worked in that department and he said the with his experience with the stain mixed with the polyurethane didn't work as well as doing it separately. I bought a small can of it anyway and tried it on a old piece of wood I had laying around and didn't care for it either. I think that it boils down to preference. I did mine in the two steps of stain then polyurethane and I loved the finished look.
Hi what stain did you use, just the normal minwax one? but since it doesnt penetrate wouldnt it just sit on top and not dry properly? or did you do the shellac layer and then that helped it to even out? I live in a country where I dont have access to such a wide range of staining products but I can get stains and polyurethane seperately so Id love to know how you did it
You videos are the epitome of furniture restoration! Thank you for eliminating excessive banter, chatter, joking and getting straight to the point with a show-as you-go strategy. I was so impressed I became a subscriber 👍🏼🤩
One of the best furniture refinishing videos I have watched. It's because of the way you narrate the video, and the way you describe what you are doing. Very easy to follow and understand.
I love the way he talks. He uses very precise words. "Particles." love it. I am considering refinishing my dining room table and most of the videos I watch may me more reluctant. Yours make me more confident.
I LOVE how thorough this was. There are so many questions a person might have that an experienced restorer would take for granted and you answered all of them in advance!
I was refinishing a bed that I bought and this video was very helpful Mistakenly bought the wrong kind of stain and it didn't work. Then I was saved again by TH-cam with this video. Very informative and got me on the right track. I will come back and show you the results when I am finished.
I'm a 3rd generation painter with 22 years experience and you are 110% right about the better the brush the better the finis. Never cheap out on a brush when painting or staining
I pulled this up on TH-cam because I was curious as to the steps to repairing, restoring, or changing the color of an old dresser or furniture piece. However, a few seconds into this video, I realized that I wasn’t here for the furniture… I was here for therapy. Your voice in the explanation is just so soothing. You’re the Bob Ross of refinishing furniture.😂
I've just watched partway 2 other videos posted by others which was more talk no action. Yours was the perfect combo of talking while doing, thank you! Learned more from you on this video than hundreds of others. that cutter alone deserved its own video.
This is one of the best Polyshades tutorials on TH-cam. I've used it with a lot of stuff with great success. I didn't think about using clear shellac primer as a sealer first, and that's a very good tip.
Love this! I feel encouraged and hopeful I can refinish my childhood bed. Very informative. I love the way people who know what they are doing share their wealth of knowledge to help others. Bless you!
This brought back memories of working with my dad, a furniture refinisher, when I was a young girl. His motto was always: *Invest in good tools!* Thanks for sharing this video! ♥
I'm gonna work on my first drawer next week...I never refurbished anything but want to start and rn I feel way more confident after watching this video ...thanks man
I swear. Sincerely. This is one of the most awesome videos I've ever watched and I've watched thousands upon thousands on yt and elsewhere. So incredibly informative
Such a nicely done tutorial! I really enjoyed watching and learned some great tricks such as the sand paper filing system and cutter and the info about silicone from furniture polish, besides using the poly stain. Thank you!
I learned so much from this video! I especially like how you organized your sand paper by using the accordion folder with tabs and I like how you made the sand paper cutter with the old saw blade! Very ingenious, sir! Stripping wood is tiresome and time consuming, not to mention messy and dangerous. I'll be trying this technique on a antique chair I purchased at a thrift store! Thank you for sharing your wisdom!
I use that stain product too with the light sanding. My furniture looks really rejuvenated after application. Love it. After a few days it really looks great.
The tool you made to cut sandpaper...jaw drop! That's ingenious! That as well as using the file folder to keep your sandpaper organized. 1:30 in and my life has changed! And I was going to strip an 8' dining table, too! Saved me a lot of trouble and skin burns from all that Jasco!
I came across your video 1 day prior to the day I scheduled to redo dining table at the restaurant I'm servicing. I'm forever grateful for this video and knowledge you passed along. Here in CA, naphtha is labeled as "painter cleaner", took me a while to figured that out. Thank you...
This is such a wonderfully narrated, very educational and informative - very professional. Thank you for this - I cannot wait to try my first refinish project now. The music is a nice touch too - well done! 🎉
This video is extremely helpful. Thank you for sharing some of your knowledge with us. I just recently got in refinishing furniture and is quickly become one of most enjoyable hobbies.
I have orange-ish oak end tables that I loathe because of the color. Can't replace them because my husband loves them. And he absolutely refuses to let me paint them. I found out about Minwax Polyshade and he's unbelievably ok with me staining them! But I've searched the internet and can't find anyone who has used them on an orange-ish wood. Until now!! I know this is an old video but if you see this, THANK YOU!
I just picked up a can of Polyshade and oil-based wood conditioner and will be trying it out on some pine, soon. Thank you for the great tutorial! A lot of other channels seem to think poly-over-poly means no prep work, then take the stance that the product is no good! Looks like you got great results.
Impeccable technique and video, I loved it! It just hurts me to see you do all that with your bare hands. You are so meticulous and organized, why not protect your skin? Anyway, thanks for the excellent video!
Ron, great sandpaper cutter and storage. However, with what you just did here in the video- sanding and such- you pretty much did "stripping" . I just finished doing a 1940's mahogany dresser and cabinet- and used ACETONE AND STEEL WOOL (no sandpaper!) . Works awesome and took off the old cruddy finish wonderfully. Then, finish the firniture with FORMBY's TUNG OIL- a gorgeous natural oil finish. I applied three thin coats of ting oil and it looks great. More natural than plastic looking polyurethane. Formby's is real natural tung oil- not the fake "tung oil" from others. Just my 2 cents from experience.
Thank you Ron for all of your good information and great ideas, it was very helpful for me. God Bless you and your family. Thank you for creating helpful you tube video that is very informative.
This video is extremely well done! Not that I have an interest in restoring furniture. Looks like some fun I can do without. The bonus is the knowledge learnt by watching someone willing to share it, thank you good sir, may God bless you 🙏
Lots of good tips. I would not recommend using any solvents like naphtha without gloves. You can buy cheap disposable gloves lots of places. Sure your uncle the auto body man washed his hands in lacquer thinner for years and only had slight tremors but why take a chance?
Took some notes 1 use paint thinner to clean 2 use 120 gritt and sand with grain of wood 3 clean again this time with tack cloth to get rid of dust 4 use shellac primer 5 stain with 2 part (polyshades 2 in 1) brush lightly, don't put on too much 6 leave overnight
Awesome video! Useful information, professional production and expert narration! I can't wait to start rehabbing an old sewing machine cabinet for my mother in law, now that I feel like I've got a fair game plan. Thanks for sharing!
nice piece love old from Abraham n Strauss Brooklyn furniture.my bedroom set is 34 years old and I would love to keep it doing what you just did. beautiful.
I'm going to have to attempt this, I have a old drop leaf desk my parents bought in the 1940's buy got beat up a bit in my older brothers bedroom, I think I would like it to be a bit darker also, so this might be the best way to do it
Have you ever used gel paint? I saw a video of a guy that painted a dresser using Dixie Bell gel paint. It has primer in it. It came out really well. You do great work and you are very easy to listen to. Thanks
This instructional video is absolutely amazing and remarkable! Excellent! speaking skills on the part of the narrator and very easy to follow instructions! ......The AUDIO VOLUME is just! perfect! and the tutorial yields a very usable and lovely piece of furniture! Wonderful video! Amazing results! Fantastic! Hope to see more tutorials on your exceptionally well-organized and wonderfully easy to follow channel!
Wonderful video with step-by-step clear and concise instructions. Please consider using gloves or other protective clothing. My mother refinished all the doors and windows in her house using a commercial stripping product without wearing even rubber gloves and a few years later was diagnosed with multiple myeloma. Her relatives typically lived into their 80s or 90s. Those who passed earlier generally had heart issues, so her diagnosis was a family rarity. We urged her from the start to always wear heavy gloves but sadly she did not. Reports indicate that people regularly using benzene or other strong chemicals without protective gear are at higher risk for certain diagnoses. RIP Mom🌺🤗❤
Ron - great videos. My question is about the Naphtha. It's very hard to find nowadays. There are other products (e.g. Painter's Solvent) which touts themselves to be substitutes for Naphtha, but I am reluctant to use them. So, in lieu of genuine Naphtha, what do you suggest to use as an equivalent, safe solvent for that degreasing step? Thx.
It looks left there, but being a bit of a perfectionist, I would never leave bubbles or streaks or irregular drips, even on the areas not visible in the room, but apparent if you open a drawer. S!till, take all of this and try a project and learn your own variations. It is a good instructional video with some great tips. I used a #OOO steel wool to rub down the furniture between layers of Varathane and my hutch and kitchen cabinet doors came out almost like glass. Use the tacky cloth between new coats.
Bro this is a cheap paint job on furniture. Honestly if you are going to do this bad a job just paint it with varnish and skip all the sanding. No need to same if you are going to half assit.
I enjoyed how easy to follow this video was, and how you didnt waste time on useless chat that we didnt click the video to hear like every other youtuber does.
The sand paper cutter impressed me the most. This man is a dying breed of craftsmanship
To p
Halving then quartering a standard sheet of sandpaper evenly can be fitted on any of the quarter sheet sanders. A half sheet folded in thirds is SOP in the paint trade working well for those who have small as well as large hands. The DIY ad/infomercials make it look as if there are just a few types of abrasive papers. Not so!
Well, if you´ve never used a pair of sissors or a boxcutter i guess it´s "craftmanship"? Lol!
@@1967DIF this is a lot slicker than running a pair of scissors through it
Did anyone else gasp with organizational excitement when he pulled out the impeccably organized and labeled expanding file full of sandpaper?
Absolutely.. to someone like me who has ocd..it is indeed a treat :-)
Yes!! I subscribed immediately!!
Yes, and I instinctively lunged for the like button, before wishing there was a hug button.
Marissa Postler Obviously an engineer
Yes.
I'm so blown away by the way you organize your sandpaper! Instructions are so simple and lots of tips on going in the direction of the wood grain, brushes, applying coats etc.
I just had to come back and tell you that I refinished my kitchen cabinets (all 54 of them) and I did it every step that you showed in this video; except that I used a stain without the Polyurethane. I did the stain first then applied the Polyurethane separate after the stain. My cabinets turned out looking brand new! I am so glad that I found your video, it helped me so much. Thank you.
Can I ask why you applied them separately?
@@rachelburright1582 when I went to Home Depot to buy my stain and polyurethane I talked to the gentleman that worked in that department and he said the with his experience with the stain mixed with the polyurethane didn't work as well as doing it separately. I bought a small can of it anyway and tried it on a old piece of wood I had laying around and didn't care for it either. I think that it boils down to preference. I did mine in the two steps of stain then polyurethane and I loved the finished look.
Hi what stain did you use, just the normal minwax one? but since it doesnt penetrate wouldnt it just sit on top and not dry properly? or did you do the shellac layer and then that helped it to even out? I live in a country where I dont have access to such a wide range of staining products but I can get stains and polyurethane seperately so Id love to know how you did it
Not surprising. I've never had much luck at all with the polyshades product.
Man never stop making videos you are a dying breed. I need to learn as much as possible from you.
You videos are the epitome of furniture restoration! Thank you for eliminating excessive banter, chatter, joking and getting straight to the point with a show-as you-go strategy. I was so impressed I became a subscriber 👍🏼🤩
I think I've learned more from this tutorial than the last 20 I've viewed. Very well made!
same here!
I agree!!
Me too
Raina Monaghan
Count me in.
I love his voice 😊 sounds like the national geographic narration of wood work 😄 I loved all the little tools
One of the best furniture refinishing videos I have watched. It's because of the way you narrate the video, and the way you describe what you are doing. Very easy to follow and understand.
I love the way he talks. He uses very precise words. "Particles." love it. I am considering refinishing my dining room table and most of the videos I watch may me more reluctant. Yours make me more confident.
I agree...clearly this gentleman is a professional and very experienced.
BEEN WATCHING RON HAZELTON MANY YEARS...HE IS THE BEST
I LOVE how thorough this was. There are so many questions a person might have that an experienced restorer would take for granted and you answered all of them in advance!
I'm seriously in love with this man, from the expandable file to the homemade sandpaper cutter, could you ask for anyone more perfect!
I was refinishing a bed that I bought and this video was very helpful Mistakenly bought the wrong kind of stain and it didn't work. Then I was saved again by TH-cam with this video. Very informative and got me on the right track. I will come back and show you the results when I am finished.
So I am in love with this man ! Finally someone who explains stuff well and slow. Thank lord !!
I'm a 3rd generation painter with 22 years experience and you are 110% right about the better the brush the better the finis. Never cheap out on a brush when painting or staining
I pulled this up on TH-cam because I was curious as to the steps to repairing, restoring, or changing the color of an old dresser or furniture piece. However, a few seconds into this video, I realized that I wasn’t here for the furniture… I was here for therapy. Your voice in the explanation is just so soothing. You’re the Bob Ross of refinishing furniture.😂
I've just watched partway 2 other videos posted by others which was more talk no action. Yours was the perfect combo of talking while doing, thank you! Learned more from you on this video than hundreds of others. that cutter alone deserved its own video.
This is the best video I’ve ever seen on the subject of preparing furniture for re-finishing - perfect for an amateur like me! Thank you.
Call it old school but this is the best.. no promoting of channels, just sharing knowledge.
This is one of the best Polyshades tutorials on TH-cam. I've used it with a lot of stuff with great success. I didn't think about using clear shellac primer as a sealer first, and that's a very good tip.
This is probably the most informative and detailed explanation I've seen so far, thank you!
Love this! I feel encouraged and hopeful I can refinish my childhood bed. Very informative. I love the way people who know what they are doing share their wealth of knowledge to help others. Bless you!
Genius sand paper storage!
ingenious* there's many ways of storing it, this is probably the most classic 😂
Kitty La Kink i
great idea on the sand paper cutter :)
Yesssss
This brought back memories of working with my dad, a furniture refinisher, when I was a young girl. His motto was always: *Invest in good tools!*
Thanks for sharing this video! ♥
This totally reminds me of those Dads that knew how to do everything!!
I'm gonna work on my first drawer next week...I never refurbished anything but want to start and rn I feel way more confident after watching this video ...thanks man
that sandpaper storage is going to change my life
Ron, you shared more value about finish work in this video than all of TH-cam
I swear. Sincerely. This is one of the most awesome videos I've ever watched and I've watched thousands upon thousands on yt and elsewhere. So incredibly informative
Such a nicely done tutorial! I really enjoyed watching and learned some great tricks such as the sand paper filing system and cutter and the info about silicone from furniture polish, besides using the poly stain. Thank you!
Nicely done😎thumbs up puh
I learned so much from this video! I especially like how you organized your sand paper by using the accordion folder with tabs and I like how you made the sand paper cutter with the old saw blade! Very ingenious, sir!
Stripping wood is tiresome and time consuming, not to mention messy and dangerous. I'll be trying this technique on a antique chair I purchased at a thrift store!
Thank you for sharing your wisdom!
There are certain points on this tutorial that got me mindblown. This guy is a such a master in his craft. And that sandpaper organizer, genius
I use that stain product too with the light sanding. My furniture looks really rejuvenated after application. Love it. After a few days it really looks great.
It was at 1.10 I realised we had a true legend in our midst.... thank you Mr Hazelton!
The thingy for the can and the shellac tips were the winners for me. An excellent video, thank you.
The tool you made to cut sandpaper...jaw drop! That's ingenious! That as well as using the file folder to keep your sandpaper organized. 1:30 in and my life has changed! And I was going to strip an 8' dining table, too! Saved me a lot of trouble and skin burns from all that Jasco!
Just bought an antique 1926 Victrola phonograph that needs a little work your video has helped me Thank you!
The most helpfull and simple video I've seen so far,
This is one of the best videos for fixing up furniture.
I came across your video 1 day prior to the day I scheduled to redo dining table at the restaurant I'm servicing. I'm forever grateful for this video and knowledge you passed along. Here in CA, naphtha is labeled as "painter cleaner", took me a while to figured that out. Thank you...
This is such a wonderfully narrated, very educational and informative - very professional. Thank you for this - I cannot wait to try my first refinish project now. The music is a nice touch too - well done! 🎉
Beautiful! I’m refinishing a coffee table a neighbor gave me. You answered all of my questions. Thanks Ron!
This video is extremely helpful. Thank you for sharing some of your knowledge with us.
I just recently got in refinishing furniture and is quickly become one of most enjoyable hobbies.
Best refinishing video I have seen so far. Very professional and detailed instructions. Many thanks to Ron Hazelton.
Best video in refinished furniture! A real craftsmanship. Thanks
I love the trick of Sealing with Shellac. Thank you for your video
I have orange-ish oak end tables that I loathe because of the color. Can't replace them because my husband loves them. And he absolutely refuses to let me paint them. I found out about Minwax Polyshade and he's unbelievably ok with me staining them! But I've searched the internet and can't find anyone who has used them on an orange-ish wood. Until now!!
I know this is an old video but if you see this, THANK YOU!
Thank you! I recently bought my first home and I hope to one day be able to do all the repairs I want. Great video.
Oh my goodness! The sandpaper file and cutter is GENIUS!
I just picked up a can of Polyshade and oil-based wood conditioner and will be trying it out on some pine, soon. Thank you for the great tutorial! A lot of other channels seem to think poly-over-poly means no prep work, then take the stance that the product is no good! Looks like you got great results.
Great job 👏🏼 your son is very lucky to have a father like you.
Very informative, and can I say I love your organized sandpaper method. That is amazing! Thank you for posting
Impeccable technique and video, I loved it! It just hurts me to see you do all that with your bare hands. You are so meticulous and organized, why not protect your skin? Anyway, thanks for the excellent video!
Deep observation thats so true!
I was thinking the same thing 🤔
OMG! Everything I need to know in 1 video! Thanks champ! Material list would be helpful.
Ron, great sandpaper cutter and storage. However, with what you just did here in the video- sanding and such- you pretty much did "stripping" . I just finished doing a 1940's mahogany dresser and cabinet- and used ACETONE AND STEEL WOOL (no sandpaper!) . Works awesome and took off the old cruddy finish wonderfully. Then, finish the firniture with FORMBY's TUNG OIL- a gorgeous natural oil finish. I applied three thin coats of ting oil and it looks great. More natural than plastic looking polyurethane. Formby's is real natural tung oil- not the fake "tung oil" from others. Just my 2 cents from experience.
Thank you Ron for all of your good information and great ideas, it was very helpful for me. God Bless you and your family. Thank you for creating helpful you tube video that is very informative.
That garand clip sound earned a thumbs up 6 years later, sir. Well done
Thank goodness.. a restoration video that doesn't just PAINT over perfectly beautiful hardwood.
This video was wonderful and will help me so much! Thank you for making it!
I seriously applaud you for this video sir👏👏 By far the best video ive seen on this type of work. Thank you
Ron, thank you so much. This video just give me the courage to tackle my wood chest I recently purchased.
I have watched a 100 videos and I learned more from just this one!
This video is extremely well done! Not that I have an interest in restoring furniture. Looks like some fun I can do without. The bonus is the knowledge learnt by watching someone willing to share it, thank you good sir, may God bless you 🙏
You are an awesome teacher! Thank you for this informative video. You answered so many questions that I didn't even know I had.
Lots of good tips. I would not recommend using any solvents like naphtha without gloves. You can buy cheap disposable gloves lots of places. Sure your uncle the auto body man washed his hands in lacquer thinner for years and only had slight tremors but why take a chance?
Took some notes
1 use paint thinner to clean
2 use 120 gritt and sand with grain of wood
3 clean again this time with tack cloth to get rid of dust
4 use shellac primer
5 stain with 2 part (polyshades 2 in 1)
brush lightly, don't put on too much
6 leave overnight
No no no, not paint thinner. NAPTHA! Very specific.
@@MightySapphire used paint thinner, did basically the same thing, idk where to find naptha
Thank you!!!!
@@CYoung-bf5uz no problem :)
I love minwax. I re did our kitchen cupboards 8 years ago and they still look beautiful.
Awesome video! Useful information, professional production and expert narration! I can't wait to start rehabbing an old sewing machine cabinet for my mother in law, now that I feel like I've got a fair game plan. Thanks for sharing!
My father was a wood expert and told me always dip brush first in apple juice then dry it. It makes the acid of the brush put on a better finish.
He is soo organized and it's true...the better the brush the better the finish. Great video..❤
nice piece love old from Abraham n Strauss Brooklyn furniture.my bedroom set is 34 years old and I would love to keep it doing what you just did. beautiful.
Where have you been all my life...glad I found you....excellent info...
I'm going to have to attempt this, I have a old drop leaf desk my parents bought in the 1940's buy got beat up a bit in my older brothers bedroom, I think I would like it to be a bit darker also, so this might be the best way to do it
Wow, great video! Very professional and such a nice voice for narrating.
Have you ever used gel paint? I saw a video of a guy that painted a dresser using Dixie Bell gel paint. It has primer in it. It came out really well. You do great work and you are very easy to listen to. Thanks
This instructional video is absolutely amazing and remarkable! Excellent! speaking skills on the part of the narrator and very easy to follow instructions! ......The AUDIO VOLUME is just! perfect! and the tutorial yields a very usable and lovely piece of furniture! Wonderful video! Amazing results! Fantastic! Hope to see more tutorials on your exceptionally well-organized and wonderfully easy to follow channel!
Never usually comment but had to here. A masterclass by an old school craftsman. Brilliant
Excellent advice. This helped me restore the finish on an old upright piano with the minimum of stripping.
Great video, thank you sir. Just bought a rough dresser for my sons room and want to repair/refinish for him.
Wonderful video with step-by-step clear and concise instructions.
Please consider using gloves or other protective clothing.
My mother refinished all the doors and windows in her house using a commercial stripping product without wearing even rubber gloves and a few years later was diagnosed with multiple myeloma.
Her relatives typically lived into their 80s or 90s. Those who passed earlier generally had heart issues, so her diagnosis was a family rarity.
We urged her from the start to always wear heavy gloves but sadly she did not.
Reports indicate that people regularly using benzene or other strong chemicals without protective gear are at higher risk for certain diagnoses.
RIP Mom🌺🤗❤
This is beautiful. Interesting that he used spray shellac to get the poly stain to adhere from the Pledge buildup
I love how simple your videos are and they are so helpful!
I love the filing system for your sand paper.
Loving the file folder for the sandpapers! I've got bits and pieces of stuff everywhere, now I know what to do with them.
Ron - great videos. My question is about the Naphtha. It's very hard to find nowadays. There are other products (e.g. Painter's Solvent) which touts themselves to be substitutes for Naphtha, but I am reluctant to use them. So, in lieu of genuine Naphtha, what do you suggest to use as an equivalent, safe solvent for that degreasing step? Thx.
Thank you for this , no machine needed you earned a subscriber ...
Thank you. Nobody tells us this stuff anymore.
It’s nice 👍 to see someone who doesn’t paint 🎨 it! Had to subscribe!
This was very professional. I’m soo impressed! Subscribed!
You are so organized, love your sandpaper file folder case!
Omg! You are a genius. I'm going to organise my sand paper the same way. I wish i could hang around in your workshop with you for a day or two. X
Thank you for this info Ron :) thinking about restoring my first piece of furniture after seeing your video.
Wow! Very helpful info! I might have some control now over my wood projects! It has been so frustrating, but thanks to utube I can learn!
Excellent video ! One of the best I've seen and I've watched hundreds of all kinds.
Did he mention to be sure and work in a ventilated area ?
Great! Thanks for taking time to do this. I really love your sand paper cutter.
Excellent tutorial. Ron explains very well & is an experienced teacher.
Excellent video!!! You should have your own TV show. Thank you
At 5:46 it appears you have overstaining on the edge of the drawer. Did you correct that or just left it?
It looks left there, but being a bit of a perfectionist, I would never leave bubbles or streaks or irregular drips, even on the areas not visible in the room, but apparent if you open a drawer. S!till, take all of this and try a project and learn your own variations. It is a good instructional video with some great tips. I used a #OOO steel wool to rub down the furniture between layers of Varathane and my hutch and kitchen cabinet doors came out almost like glass. Use the tacky cloth between new coats.
Perfectionist here, first thing I picked up and unsubscribed hahaha
Bro this is a cheap paint job on furniture. Honestly if you are going to do this bad a job just paint it with varnish and skip all the sanding. No need to same if you are going to half assit.
@@Valient6 😨💨
I enjoyed how easy to follow this video was, and how you didnt waste time on useless chat that we didnt click the video to hear like every other youtuber does.