The 5 Best Things About My 1UP Bike Rack

[@BullDogg007]

Thank you for the great review! This is exactly what I needed to see and hear, before making a purchase decision!

[@rayrenz3599]

Nice review video! Your review answered a couple of questions that I had but couldn’t find the answer to on 1up’s website. I’m glad the rack has a latch to lower the bike for trunk access. That was one of my main concerns before pulling the trigger.

[@codyrye1519]

*Fits my car perfectly with my new **Latest.Bike** raker , very easy to set up and take down. Great quality and price, very happy with this purchase!*

[@thebeardedshredder7001]

Great to hear!

[@proProcrastinatooor]

Excellent review. Was going to ask what prevents thieves steal the rack with the bike, but you answered that.

[@thebeardedshredder7001]

Thanks for watching!

[@boballard6040]

Great review! I have the same on order and operation seems very slick. Appreciate your comments!

[@thebeardedshredder7001]

Right on! Thanks for watch 🤙🏼🤙🏼

[@Outdawrzman]

Nice review ,going to buy one ASAP
Thanks

[@thebeardedshredder7001]

Enjoy it

[@MichaelsJohnDeere]

Thanks man I’m sold. Last weekend my Thule T2 let go randomly of my girlfriend’s bike as we travelled down route 95. I looked back and it was there and then looked back again bike had disappeared. The only thing that held it there was the strap on the back wheel. Cost me over $250.00 in parts to fix her bike which it could have been worse. I like how this holds both wheel all the way around, and USA made out of what looks aluminum and metal. Thanks again

[@shadowcast72]

Very useful review! Thanks

[@thebeardedshredder7001]

I’m glad it was helpful! Thanks so much.

[@SoAnswerAway]

Awesome. Will be ordering my single.

[@thebeardedshredder7001]

Rock on!

[@Deus-Too]

Really good video, thanks. I have the 1Up Single Bike Heavy duty rack. Putting it together, installing it on the back of my truck was simple. I tightened everything up with the special tightening wrench that accompanied the rack, but found that after only half dozen trips, each of which was less than 30 miles, there was significant wobbling in the rack. I needed to use the enclosed wrench to tighten it up again. Not a big deal, but I hope that doesn’t become a recurrent issue.

[@YewtBoot]

I've found that pushing the rack in as far as possible helps eliminate some of that wobble that will loosen the rack.

[@juancarlosloayza3001]

Awesome Review bro !! Greetings from Ecuador !

[@thebeardedshredder7001]

Glad you enjoyed it!

[@carlfuller4445]

Just got mine yesterday. The double heavy duty or whatever it is. I'm impressed. Somewhat concerned about the rear fender coming so far down the tire. I will have to use a strap to keep the rear tire from bouncing up, possibly dislodging itself from the 3 o'clock position of the 'grabber'. I've heard of modification of the rear fender.

[@thebeardedshredder7001]

What wheel size do you run on your bike?

[@cleftoftherock6797]

Don’t run a One Up through a car wash. Up or down. If it’s touch-less ok. If it has those scrubbers and hanging cloth things that move back and forth, it will get caught and damage the rack. It happened to me. Other than that great review. Thanks.

[@thebeardedshredder7001]

I have been very lucky I guess. Thanks for looking out!

[@bigpapaporsche1]

We like our 1Up Bike Rack, it carries two Rad Mine Step Through Bike (20 Inch Tires) on the back of a Sprinter. Note, we did have to modify the Rear Fenders by shortening them 10 Inches, they still look good. Also, we installed 1/8 thick plastic spaces on each side of the Upright Tires Holders on each side, which added 1/4 to the overall width where the Tires go through the Brackets. We will also be adding a Light Bar, probably 1Up assy.

[@thebeardedshredder7001]

That's awesome! Glad you were able to make the appropriate adjustments in the design to fit your needs. Hopefully others will find your modifications helpful.

[@Drostvideo]

Thx for your review. Had any trouble from the law with the rack hiding your rear tag?

[@cindymaher3148]

Great review! Thank you so much. Do you take the Equip'D off-road much? 1Up does not recommend the Equip'D for heavy off-road usage and I plan to drive some off-road but not difficult roads only as I stumble across them by accident. I am a 64ish old lady and could use the lighter weight rack and the ergonomic improvements. I would kindly ask your opinion from your experience with the Equip'D.

[@dondonner1095]

Well both of my bikes do have front and back fenders but I found a way to load on mt 1up that makes it not a problem. Just need ti innovate a bit.

[@agent3012]

Appreciate the review. How easy is removing and then later reinstalling the bike rack if someone wants to do so?

[@mikesharp1475]

Finally a review that is straight to the point and useful!!! Does the bike wiggle and shake much in ruff terrain? I'm asking I have a hunting ebike about 72 pounds. I will be hauling it in sometimes ruff roads to get to my hunting properties. Wondering if it will be secure enough? Any feedback would be a appreciated.

[@thebeardedshredder7001]

I've never been concerned off road with my bike in tow. 4x4 has been required more than once while the bike was loaded. I hope that help! 🤙🏼

[@seanfrank4158]

1up builds a rack that will handle the weight of an e-bike. You might need to buy a large tire adapter from them but it looks to be just the ticket for heavier e-bikes.

[@wakematt]

Hi I was just curious if it’s possible to load and unload bikes with the rack tilted down. Thanks for the video!

[@jhm054]

Have the regular 1up style for a 2” hitch and an extra tray add on to take a second bike, never bought a bike rack before but figured buy once and never again. Great product. Great review. Just need to get the handle for it. Also cool, its easily interchangeable with any car/truck with a hitch so ill have it forever and can use it on all my vehicles.

[@thebeardedshredder7001]

I definitely agree with the buy it once thought process. The ease of removal is great too.

[@pete8400]

Great video, I've probably watched it 10 times . Does the Euip D have the same type of Allen wrench as the original with a little hole in the middle to add a little extra security from having your rack stolen?
Thank you...

[@thebeardedshredder7001]

Their is an allen wrench but it does not require the keyed Allen like the original

[@bigpapaporsche1]

We have the Super Duty Double model with two ebikes on the back of a Sprinter Class B RV. We also use the RacAttach Swing Arm.

[@thebeardedshredder7001]

Glad to hear it. Ebikes are heavy from what I have been told.

[@thebeardedshredder7001]

We just got our RV travel trailer. I will definitely be adding the 1UP to the back

[@bigpapaporsche1]

@@thebeardedshredder7001 We take the Batteries off when on the Bike Rack, saves 8 lbs each. Additionally, we do this not only to save weight, but also for security reasons, who wants an Ebike without the Battery.

[@thebeardedshredder7001]

@@bigpapaporsche1 that’s a great idea 💡. Do you use your RV a lot?

[@EmotionRadio]

I am torn between buying the Black or Silver. I like the Black but I am concerned on how it holds up to scratches, etc. Yours looks great from what I can see. Can you let me know how it's held up to scratches. Silver seems it would be less likely to show scratches. Your thoughts?

[@billytripp4849]

Appreciate the video. Is it possible to load say the front tire of the bike and secure it and then go lift the rear of the bike and then secure it? I have a ebike I hunt off of and Im 61. Thanks again.

[@GT5005]

Great review! I was wondering what you think about the wheel locks that go through arms and secure the wheel in place?

[@thebeardedshredder7001]

I have personally never used one. That said, I bet they are solid, especially being a 1Up product. I prefer the generic cable with a pad lock. Although, a lock just keeps an honest man honest 😂

[@noldia]

The wheel locks are okay but I believe they could be quickly broken off with a pipe. I use a cable as described here for when we're out riding along with the wheel locks, both of these are easily removed with the right tools but are still better than nothing when making quick stops. When we travel we have our bikes with us and I use one of those Kryptonite chains, definitely harder to cut thru quickly.

[@jimji2774]

Those hold down arms will get in the way of a ramp for loading heavier e-bikes. They have to be undone and hinged down on the ground to use the ramp. This carrier is really better suited for regular mountain bikes with no rear fender.

[@philiphalpern3246]

I loved my 1up… until it got stolen last week! I encourage everyone to add a burly second lock to secure the rack to the car. The lock that came w the rack isn’t nearly sturdy enough.

[@thebeardedshredder7001]

Great point.

[@noldia]

Nice review, and I agree with you on 1up being one of the greatest bike rakes on the market. One thing you mention was using wd40 to lube the pivot points, may I suggest that you use a silicone spray for this. That is what I use and it works great. The problem that I find using wd40 is that it is a "wet" solvent/lubricant and it will attract dirt and dust. Using a silicone spray will dry and still offer a smooth operation.
Along with the 1Up rack I also purchased the RakAttach for my Jeep Wrangler since I have swing door, best add on I have purchased.

[@thebeardedshredder7001]

Thanks for the comment! I will check out the silicone spray for sure! You are correct the WD40 does attract dust...

[@srobeck77]

@@thebeardedshredder7001 id consider the OG wd40 a degreaser/cleaner, but not a lube. WD40 does make a great dry lube bike chain lube, but it specifically has to say that on it

[@thebeardedshredder7001]

@@srobeck77 I will have to get some.

[@mscm4592]

Luv seeing great big ol pickup trucks with huge beds with bike racks on the back (so people can admire the fact that they ride a bike).... Isn't the point of pickup trucks about having a big bed to carry lots of stuff?
Eye roll.

[@christiblauwkamp9888]

Great review, what do you suggest for those of us who have fenders on their ebike? And will these work for tires that are 20" by 3.3"? I have a RAdRunner Plus. Front and back fenders. Thank you.

[@thebeardedshredder7001]

You should not have any trouble with your fenders due to the design. As for the wheel size issue, you will not have any trouble. The arms are 4.5" wide and can be adjusted to fit anything between at 29er and below.
I hope this helps! Thanks for watching 🤙🏼

[@bigpapaporsche1]

Trust me, you will have to modify your Rear Fender. We have two Rad Mini, Step Through with 20 Inch tires and found that it was necessary to cut 10 inches off the overall length so the Hold Down Roller would put the right amount of pressure on the tire. Note: Remove the fender and cut the 10 Inches off the Chain Cut Out portion of the fender, this will maintain the Flared Finished End of the fender to keep the factory look!!

[@SusanWernerPhotographer]

As for lifting the bike up onto the rack, I can’t imagine you would be able to do it the way he did it in his video. I am wondering about that also.

[@user-lx5cu2fu5k]

Do you have to remove and replace the red Detent pin everytime you move the rack to a different position?

[@tomdudley6867]

Cold beer!

[@pamelabronson7038]

Does 1Up make a rack with a ramp? Help!!

[@Deerpoo22]

In your opinion how beefy does the rack seem? Just looking at the rack looks like the 50lb limit Is for liability reasons. I can only run a class 1 hitch and top out at 200lb tongue rating. This rack plus a 60ish lb ebike are well under that limit. Obviously I'd be ignoring the manufacturers recommendation but do you think it's enough for a 60-65lb ebike?

[@thebeardedshredder7001]

I’ll put it this way… I use it as a step to get in the back of the truck sometimes. Also, the construction is solid, I have not been concerned about the overall strength of the rack.

[@chrisfaessen1417]

I got an equip d a couple years ago and am now realozing i shouod have bought one of the more off road rated ones they make... the equip d does sway a lot of rough roads which makes me worried...

[@jwiereng]

looks like the rachet on this equip D model vs the regular 1Up. Are you aware of any pros and cons to either of the styles?

[@thebeardedshredder7001]

Equip D has a more ergonomically friendly operation.

[@SirCamsmorethanalot]

1Up, best rack but better audio would help.

[@thebeardedshredder7001]

Thanks for your comment! Thankfully, I have upgraded my mic set up.

[@AndrewSmyk]

Have you used the expansion carriers?

[@thebeardedshredder7001]

I have not

[@3igger1]

Hi! How safe the bike from the heat of your exhausts? Does it have enough clearance to protect your bike from the heat? Thanks!

[@ps429]

I have the silver 1UP and mine does get some exhaust soot on the bottom but it cleans up easily.

[@thebeardedshredder7001]

Yes it does

[@SusanWernerPhotographer]

Now I’d like to see you do that with my bike. It weighs 73 pounds.

[@nathansmith7074]

Who tf rides a 73 lb mountain bike?

[@alvinmatthew53]

i realize that this video is a year old but was wondering if this (1 UP Bike Rack ) is still available for purchase and do you have an actual link to that specific rack.

[@thebeardedshredder7001]

Thanks for watching! Yes, it is still available on their website. I will link it below, and this is not an affiliate link.
www.1up-usa.com/product/equip-d-single/

[@andytripp8069]

Just got my 1up today and installed on my F150. First problem I see is with the rack in the up position is it blocks the license plate. It appears yours is the same. I would imagine that is against the law maybe? Wonder if I need to purchase the license plate attachment they offer.
Great review by the way.

[@thebeardedshredder7001]

Personally I have not received a ticket. However, I would not be surprised in the least if was to happen.

[@peetfj]

They sell a license plate add on for the rack. I had the same concern.

[@thebeardedshredder7001]

I may or may not have received a warning a few weeks ago. 😂

[@ps429]

Any bike rack can block your plates just as pulling a trailer blocks your plates.

[@Daner949]

Can I fit my bike on with my camper shell on my truck? Scared the handle bars might rub against the back window of my camper shell.

[@thebeardedshredder7001]

That should not be a problem. My bars don’t extend over my tailgate. I run 780mm bars.

[@Daner949]

@@thebeardedshredder7001 excellent I’m sold. Ordering one now. Thank you for the inspiration.

[@thebeardedshredder7001]

Did you get the bike rack yet? If so, what did you think?

[@9008332]

Have you had any issues with law enforcement because your license plate is blocked when the rack is folded up?

[@thebeardedshredder7001]

Great question! So far no, but never say never right🤙🏼

[@bigpapaporsche1]

In Ohio, the BMV will issue a duplicate Lic Plate for situations like this. Before this was available we simply took our Rear Plate and had it copied on an piece of aluminum that the Sign Shop had for this purpose, it cheaper and faster than the BMV! On our Sprinter, I will be adding a Rear Light Bar that will incorporate the Stop/Tail Lights, Back Up Lights as well as the Lic Plate Bracket/Light. The plan is to have the Light Bar rotate, so it can be seen when the Bike Rack is in the Up/Down position. Of course the all the lights will be LEDs, and the Back Up Lights will be High Powered to improve visibility at night.

[@YewtBoot]

Any bother from the local authorities about it covering your license plate? That problem is inconsistently handled in different areas.

[@peach495]

1 UP makes a lock that goes through the holes of those brackets & through the wheels similar to a locking hitch pin. Simple & not dealing with a couple feet of rigid twisty cable.

[@Planetone.]

Correct me if I'm wrong but the older model didn't have that locking pin, good to know this one does. Thanks for pointing that out. Older videos don't have that locking pin,

[@thebeardedshredder7001]

I’m not sure about the older versions, but I’m glad the new version does!

[@hauk3839]

Any coupons for this

[@thebeardedshredder7001]

Unfortunately no.

[@jBstfu]

Super Duty or Equip D ?

[@thebeardedshredder7001]

EquipD

[@SocialDem86]

I think it’s pronounced “equipped.” Hence the apostrophe.

[@charlesnoska2225]

Nice rack, can't use it with fenders.

[@dondonner1095]

Great if you don't have fenders.

[@andrewscasualmtb]

Real bikes don't.

[@thebeardedshredder7001]

I am running a front fender on my current rig. So far it has not been an issue.

[@thebeardedshredder7001]

🤣 I have to run a front fender on all my bikes now. You should check out the Kitsuma video.

[@jimji2774]

front fenders are generally much shorter it's the longer rear fender that causes the problem. better that you just are upfront about this bikes limitations.

[@vancmann]

Ha! Doesn't look rigid when shaking it

[@DIYManiacJohnP]

No integrated locking system is a big "miss"

[@thebeardedshredder7001]

It would be helpful. However , I like being able to use my own locking system.

[@vpuentes1956]

The rack will not work for heavier e-bikes like mine. Each bike weights 83 pound...

[@thebeardedshredder7001]

What brand E bike do you ride? 83lbs is a lot!

[@kylenelson9816]

Take your battery off and you'll probably be in the weight limit

[@ps429]

That's one of the problems with e-bikes along with several reports that they are catching on fire while charging. No thanks. I'll stick to my human powered 20 pound bike.

[@cyasi]

Too expensive.

[@hugostamm670]

One thing for sure it isn’t. PRICE