Can this be configured via hik-pro and sent to the end user to work on hik-connect? Does it have the option to be hardwired and can it be added to a recorder like the previous versions?
Had a DB2 for a day, chime got really hot and disappointed that it does not support ONVIF and RSTP. Also, no way to pump the volume up or down (chime). Must say that vid quality was excellent. Returned it because firmware updates did not start, probably my IOT network has to many restrictions :(
Hi, I have one of these that was installed and set up professionally and would like to tweak the range as it is picking up all large vehicles that pass my house. I have watched numerous of your videos and none give me the correct way. Thanks in advance
Great product so far. However is there a way to extend the Post Record Time to Memory Card from the PIR Alarm. When I playback the video never seems to last long enough and people are still at door when the playback stops. If anything were to happen this is then not captured.
How many years is the rechargeable batteries last and when they die out completely can they be replaced with new rechargeable batteries or will the doorbell be no good anymore
i am having a lot of trouble getting my doorbell to connect to the internet i had it connected with a lot of hassle for about two weeks and had to unplug the chime to move it and now i cant connect it at all on any device i have i even changed my router to only broadcast 2.4ghz and still no joy i think i will be sending it back. Have you any idea what could be happening.
Could you please inform me about the maximum distance in meters between the outside doorbell bottom itself & the antenna, which should be inside the house for interfacing. Thank you.
Hi. I was hoping to add this to my NVR. I have a battery ready to wire up that will last 2-3 weeks and be rechargeable from inside. So just need an overnight charge every 2 weeks. I have tried to add the bell separately from the chime like you advise with the DB1. But it won’t work. Assuming as the verification code is for the chime not the doorbell. Is there anyway of getting the verification code or getting it to work. I should have read the comments on here first before buying the DB2.
A borrowed info from an IPCAMTALK's thread, someone suggested the DB2 Pro supports neither ONVIF nor RTSP. I am hoping to validate this before purchasing, too!
![โรงเรียนตอนตี 2 โคตรหลอน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/2MAEMwqVYh8/mqdefault.jpg)
good stuff mate..thanks for being so detailed
Can this be configured via hik-pro and sent to the end user to work on hik-connect? Does it have the option to be hardwired and can it be added to a recorder like the previous versions?
can't be hard wired. Hardwire is only to use your main chime. no hardwire charge option available.
Can you hard wire this one as well? The lugs on the look like power terminals. Thanks for your help.
DVS got the scoop!
We do indeed!
Had a DB2 for a day, chime got really hot and disappointed that it does not support ONVIF and RSTP. Also, no way to pump the volume up or down (chime). Must say that vid quality was excellent. Returned it because firmware updates did not start, probably my IOT network has to many restrictions :(
Hi, I have one of these that was installed and set up professionally and would like to tweak the range as it is picking up all large vehicles that pass my house. I have watched numerous of your videos and none give me the correct way. Thanks in advance
what mode is the detection set as , as there are a couple
Unsure Dave as all my settings/menus look different to the ones you show on your tutorials?
Great product so far. However is there a way to extend the Post Record Time to Memory Card from the PIR Alarm. When I playback the video never seems to last long enough and people are still at door when the playback stops. If anything were to happen this is then not captured.
Thanks for the feedback , I get the issue you could face , I will look in to it
How many years is the rechargeable batteries last and when they die out completely can they be replaced with new rechargeable batteries or will the doorbell be no good anymore
i am having a lot of trouble getting my doorbell to connect to the internet i had it connected with a lot of hassle for about two weeks and had to unplug the chime to move it and now i cant connect it at all on any device i have i even changed my router to only broadcast 2.4ghz and still no joy i think i will be sending it back. Have you any idea what could be happening.
Hello , assuming its in range, have you been able to factory default this and try again?
Hi
I'm having difficulty taking the doorbell off to recharge
A y advice plz
Can i add the camera via Hik-Connect app?
It has worked when I did it , suggested is the EZviz app , and moving forward it might not be supported by HIK-Connect
Can it connect to alexa echo show? When it pressed can it show automatically on echo show and talk it back?
Can it be used with existing hik nvr ?
Had a question does hikvishon own ezivz?
Thanks for sharing this great video.
Does the AI detection recognize animal, human, car?
How do you find it with moving tree's branches?
It's based on human detection but very good , sometimes I do get some dogs detected by my door , but I ma ok with that 😊
Could you please inform me about the maximum distance in meters between the outside doorbell bottom itself & the antenna, which should be inside the house for interfacing. Thank you.
4-5 Meters
i wonder , can we replace the battery ?
its sealed inside , so not really
Been a while. You've lost some weight looking better.
Hi. I can't get the doorbell to push to my phone when the door bell pressed, any help please?
Can we add this to a Hikvision nvr like you did with db1? Issue is I can only get the chime IP address?
the battery one you cant add , as its battery it would try to pull the stream continually and the battery would not last long
Hi. I was hoping to add this to my NVR. I have a battery ready to wire up that will last 2-3 weeks and be rechargeable from inside. So just need an overnight charge every 2 weeks. I have tried to add the bell separately from the chime like you advise with the DB1. But it won’t work. Assuming as the verification code is for the chime not the doorbell. Is there anyway of getting the verification code or getting it to work. I should have read the comments on here first before buying the DB2.
@@DanMc0048 we have had it working but its really not recommended or stable , let me see if it can be improved
@@DVSLTD cheers. If you want me to try or mimic anything my end to help let me know.
@@DVSLTD Did you get anywhere with this solution?
How to reduce noise in two way talk
Hi Dave can you add another chime? Would like to have one in the log cabin at the bottom of the garden. Cheers
I will check if the battery one allows 2
@@DVSLTD Thankyou
Can you do time lapse too?
Not currently on the battery doorbell I will ask if they will
Can the db2 pro be connected to the turbo dvr. Also can it be hard wired.
In short no and no , we have other wired version available
When is this due to be released?
we have them in stock now :)
@@DVSLTD just looked out of stock 🙈
can i connect this device to hik dvr ?
A borrowed info from an IPCAMTALK's thread, someone suggested the DB2 Pro supports neither ONVIF nor RTSP.
I am hoping to validate this before purchasing, too!
whats the battery life?
It depends on use but this can be 100+ days
where can i get a price to DIY
google?
Hi, where can we buy this EZVIZ DB2 Pro ? Thanks.
It's not yet released
@@DVSLTD Any idea when this will be released?
@@nanocnc stock should be with us this week I hope 😊
Not the most strait forward of companies
Product is not fool proof
5 out of 10
The actual doorbell itself is pretty crap and crap ain’t the word who have has this i pity them like myself
pm me
Like to update the db1 to 5mp and no battery will that be possible?