This video was VERY helpful as I just replaced (in Sept 2024) the batteries in both my TT Rider 400 (from 2015) and TT Rider 550 (from 2020). Both units use the same specialized battery (#VF3W, 3.6v, 3220mAh). The only replacements were from a vendor in Hayward, CA., same Model #, but with a life of 2500mAh. Anyway, thanks to this video the swaps went perfectly, and both units are working fine. Thanks from southern Oregon! Ride On! 😁
Great video - thank you. Mine filled with water last weekend in a deluge. Never been opened before but it's in two halves now. Fingers crossed it dries out successfully.
I just replaced the battery. As VF3W is not available I can confirm that battery VF1C has the same connector and is working, although it has less capacity
Ant at 3 o'clock!! Sorry I mean 15:00. Thanks for this. Do you know how to cure the condensation issue on these please? I know they fix it under warranty but mine is old. Is there a DIY fix?
Any idea if the hardware is the same on the 450? After a crash my tomtom wont get any GPS connection anymore. The outside is cracked where the GPS antenna is. I have an old 400. I might want to swap the circuitboard so of the two. Thanks in advance
bit of long shot but why not, i live in the UK, can you give me a link where i can get a battery, ebay is a minefield, or can you fix mine, i can post it out. thank you.
I honestly couldn't tell you, I've not held one in my hands to compare. I doubt they would change the design a whole lot, and as you can see from this video, it's easy to take one apart and see for yourself. Just be gentle and if you get stuck, reverse your steps.
my tomtom is same model it gets like a moisture cloud across the screen once i haave been riding half an hour what is causing that and what can i do to stop this damp getting into the screen
There's a tiny air vent in the case that should let moisture out. I've experimented with putting a few silica gel beads in behind the circuitboard and they seem to absorb any moisture in the air.
ciao, ho spaccato il pulsante di accensione del mio tomtom rider 40.Potresti darmi il consiglio su come reperirlo? attualmente per accenderlo ho usato del silicone nero ma è inguardabile.Aiutatemi perfavore
It sounds more like that part of the screen connector has corroded. You might need a new circuit board instead. Or that connector might just need cleaning with a cloth and electrical cleaner.
Hello mate. I followed the video to change the battery. Unfortunately I can't find one on the web. It's a VF3W 3,6v 322mAh P/N : LHA11133000 I don't know where to find one. If you have any idea to make my 400$ brick alive… I would take it !
seems like VF3W is not available, but from pictures the connector of VF1C or VF6M might fit. Altough it is only 1/3 of the capacity, but seems the only available option.
This video was VERY helpful as I just replaced (in Sept 2024) the batteries in both my TT Rider 400 (from 2015) and TT Rider 550 (from 2020). Both units use the same specialized battery (#VF3W, 3.6v, 3220mAh). The only replacements were from a vendor in Hayward, CA., same Model #, but with a life of 2500mAh. Anyway, thanks to this video the swaps went perfectly, and both units are working fine. Thanks from southern Oregon! Ride On! 😁
Thank you very much. Very well explained and helpful.
Great video - thank you.
Mine filled with water last weekend in a deluge.
Never been opened before but it's in two halves now.
Fingers crossed it dries out successfully.
First video I've seen of teardown of tomtom, very clear and complete explanation. Also great tip to avoid stripping the threads, thank you!
Thank you so much, clean vidéo and tuto, mine as water inside, the top switch rubber is cracked.
Did you manage to get a switch rubber? Mines cracked and I can’t find a replacement
I just replaced the battery. As VF3W is not available I can confirm that battery VF1C has the same connector and is working, although it has less capacity
Mine just died today, thank you for your comment!!!
Thanks for the teardown. Shame I can't seem to find a replacement battery anywhere for it! Atleast it still works while plugged in I guess.
Good informative video here my battery needs changing this video will help me loads 👍🏻👍🏻👍🏻thank you
Hi. Very good video. Have you any suggestions where I might buy a VF3W replacement battery? I'm struggling!
Thank you. Very clear instruction.
Excellent, thank you 😊
Thank you for this video! Very helpfull!
Where do you get a replacement battery?
Great, thanks for that. I want to upgrade my battery.
Ant at 3 o'clock!! Sorry I mean 15:00. Thanks for this. Do you know how to cure the condensation issue on these please? I know they fix it under warranty but mine is old. Is there a DIY fix?
Very helpful thank you
Any idea if the hardware is the same on the 450? After a crash my tomtom wont get any GPS connection anymore. The outside is cracked where the GPS antenna is. I have an old 400. I might want to swap the circuitboard so of the two. Thanks in advance
bit of long shot but why not, i live in the UK, can you give me a link where i can get a battery, ebay is a minefield, or can you fix mine, i can post it out. thank you.
great stuff,
merci!
TThanks. do you think that 500 is the same?
I honestly couldn't tell you, I've not held one in my hands to compare. I doubt they would change the design a whole lot, and as you can see from this video, it's easy to take one apart and see for yourself. Just be gentle and if you get stuck, reverse your steps.
my tomtom is same model it gets like a moisture cloud across the screen once i haave been riding half an hour what is causing that and what can i do to stop this damp getting into the screen
There's a tiny air vent in the case that should let moisture out. I've experimented with putting a few silica gel beads in behind the circuitboard and they seem to absorb any moisture in the air.
@@nicebigwrench8730 this is brilliant - please can you tell us where this tiny vent is?
ciao, ho spaccato il pulsante di accensione del mio tomtom rider 40.Potresti darmi il consiglio su come reperirlo? attualmente per accenderlo ho usato del silicone nero ma è inguardabile.Aiutatemi perfavore
hello, thanks for this video, where can i buy a new Batterie?
greetings a lot
Think you can get them from eBay
If I get water in it and the screen stops working (wnt let me press anything on the left) should I just replace the screen?
It sounds more like that part of the screen connector has corroded. You might need a new circuit board instead. Or that connector might just need cleaning with a cloth and electrical cleaner.
Hello mate. I followed the video to change the battery. Unfortunately I can't find one on the web.
It's a VF3W 3,6v 322mAh P/N : LHA11133000
I don't know where to find one. If you have any idea to make my 400$ brick alive… I would take it !
Sorry I've had a look and I can't find an exact match for you. Might be referred to under a different model number
seems like VF3W is not available, but from pictures the connector of VF1C or VF6M might fit. Altough it is only 1/3 of the capacity, but seems the only available option.
Brilliant! Many thanks.