Wow it sounds amazing it's going to be like night and day over the old carburetor setup finally you're going to see what this car can really do can't wait to see you drive it keep up the great work my friend stay safe be blessed
I run a carb on my C10 and smoke FI cars all day at the track. Most drag cars still use carb and most drag bikes use carbs. You comment of "see what the car can really do" holds no water.
Haha ,JD you and that Camaro are gonna shed some black skin all over the asphalt and you'll have the most smiles per mile since you bought it 2 years ago, a friend of mine bought a 1979 Camera Z28 new just after graduation , the car has never seen winter and he finally did build on the stock 350, just a mild build and did the same system , it fired after the 3rd start ,no leaks ,Wow is all i can say , it turned into a animal ,the guy that dyno tested the car for him said he gained 111 bhp and almost 130 ft lbs torque at the wheels, it sounds better ,drives better, and lays 2very nice black patches down the highway, he did beef up the rear diff/driveshaft, just too be safe, the original TH400 handled it just fine, Holly Sniper EFI are worth the time and money to install, a good investment 👍
thats a lot of work and very sucessful first start. I installed a sniper EFI only in my stock 454 suburban and went seamlessly!! had the same first startup, almost instant. only thing I had to adjust afterward was the IAC and idle
Congratulations JD! I'd call that install a great success, too. I had faith in you, man. You looked genuinely surprised when it fired right up. Sounds good and that throttle response while blipping it... damn that's not playing around. Looking forward to the test drive. It's going to be a night and day difference. Y'all have a great day, buddy.
JD, i was goin to mention on the last video but your coil and fuel reg are a lil close,incase the line did have a leak it would drip right down on the coil🔥🔥so i'd move that to the left some more on the safe side.
A set of modern CNC heads would've probably done the trick without going to fuel injection and would've given it a little more power with better acceleration...
Dude I don't care what issues your mom has there's supposed to be your friend standing right in front of you acting smart I know you didn't like it I could see it on your face not cool dudes I would have put you down the road if it was me
Not only does it sound more gooder, but it also sounds like the responsiveness is much much better.
All that tedious work and she fires right up, 🔥🔥🔥
Holley efi is awesome they definitely raised the bar when it comes to efi systems. Good job on the install 👍
That bad boy sounds good !!!
Dang it sounds so much better already! Can’t wait for the first drive and dyno videos
Hello Guys from Australia 🙃
Well that was great and what a start up and sounds very very cool..
Can't wait for the test drive.😎😁
Awesome--so happy for you! Cant wait to see that first drive!
There's this really cool modern invention called a FUNNEL!
Wow it sounds amazing it's going to be like night and day over the old carburetor setup finally you're going to see what this car can really do can't wait to see you drive it keep up the great work my friend stay safe be blessed
I run a carb on my C10 and smoke FI cars all day at the track. Most drag cars still use carb and most drag bikes use carbs. You comment of "see what the car can really do" holds no water.
Haha ,JD you and that Camaro are gonna shed some black skin all over the asphalt and you'll have the most smiles per mile since you bought it 2 years ago, a friend of mine bought a 1979 Camera Z28 new just after graduation , the car has never seen winter and he finally did build on the stock 350, just a mild build and did the same system , it fired after the 3rd start ,no leaks ,Wow is all i can say , it turned into a animal ,the guy that dyno tested the car for him said he gained 111 bhp and almost 130 ft lbs torque at the wheels, it sounds better ,drives better, and lays 2very nice black patches down the highway, he did beef up the rear diff/driveshaft, just too be safe, the original TH400 handled it just fine, Holly Sniper EFI are worth the time and money to install, a good investment 👍
So far it’s worth it.
Good video , watched it all the way to the end.
She sounds angry. Very nice! Can't wait to see the first drive.
thats a lot of work and very sucessful first start. I installed a sniper EFI only in my stock 454 suburban and went seamlessly!! had the same first startup, almost instant. only thing I had to adjust afterward was the IAC and idle
Congratulations JD! I'd call that install a great success, too. I had faith in you, man. You looked genuinely surprised when it fired right up. Sounds good and that throttle response while blipping it... damn that's not playing around. Looking forward to the test drive. It's going to be a night and day difference. Y'all have a great day, buddy.
I was shocked, not expecting it to start that easy. Wish I would have done this sooner.
Sounds so much better from the other videos to now
It’s a different car now
@@JD_JoyrideTV bet it makes some better numbers on the dyno
Great Video. Nice Job You guys did.
JD, i was goin to mention on the last video but your coil and fuel reg
are a lil close,incase the line did have a leak it would drip right down
on the coil🔥🔥so i'd move that to the left some more on the safe side.
Very cool bro. Can't believe how big the kids are getting.
I like it I know where a 302 Z 28 engine and 69 307 Camaro are just wishing for some pretty Frankenstein
It sounds great JD can hardly wait to see how much better it runs. Peace ✌️ Out Brother.
Great job 👍
Let's go you just woke the beast let it fly
Oh yeah the Beast is alive.
Car sounds nasty!!!! 👍🏼👍🏼👍🏼
Hell yeah!
Right on Sounds really nasty now great video
The Camaro is right now
It will blaze the tire now.😊
Do you have knock sensors with any of that
Well Done!! Bad A$$ Camaro!!
Need a test drive and new dino test up date
Nice job but I’ll stay with my 780 Holley in my 70 Z/28.
Shut up
That car would be much better to drive if you got rid of those skinny fronts and steam roller rears for a set of street appropriate tires.
Who did the programming $$$$
Is holly parts made in the USA or China ?
Where is the first drive video
I bet the carb was too big
Nope got two bad ones never want another
1st
Weirdo
@@GrahamReid34 I agree
You can drive away in your Mustang because nobody cares
WOT timing at 32 degrees, little high
A set of modern CNC heads would've probably done the trick without going to fuel injection and would've given it a little more power with better acceleration...
As seen from the previous video, the problem/s was NOT the heads. EFI is also going to make a MUCH larger difference than heads.
Dang man thing sounded great 👍
Great job on dragging that camaro out of the inefficient dinosaur age of carbs and into the age of modern technology
It’s wild how much gooder it is.
@@JD_JoyrideTV Gooder Is always the best option
Dude I don't care what issues your mom has there's supposed to be your friend standing right in front of you acting smart I know you didn't like it I could see it on your face not cool dudes I would have put you down the road if it was me
#horticulturistlaura