For people worried about the thermals: they actually look great! Might not be obvious to people skipping through, but there are 3 separate floors, each floor has case fans near the windows making for a very efficient air-flow! Not to say it's an optimal setup, but the thermals are better than the off-the-shelf computers we used before!
As a computer tech, I wasn't worried about the thermals. However if you have to work on anything regarding the motherboard, it's going to be a PITA to work on it, considering you have a large radiator with short wires and hoses fed through that hole. Good luck with that.
When we build our wooden PC case all any one would comment about was the thermals with wood. its like DUDES WE GOT IT lol We promise its working or we wouldnt do it this way! This build is amazing!
Maybe tag a good tech TH-camr, and ask them to have a look? :) My top pick would be Gamers Nexus. They're very busy though. But there's lots of other tech TH-camrs. :) I noticed that some of us had comments about the tech side of the build. But there is no way of knowing who is skilled or not amongst the tech comments.
This is the most Nerdforge thing you have ever built. The blend of modern electronics and medieval fantasy is such a signature of your channel, and it's so great to see you working in your new studio. Plus, a new place to steal gravel from!
Remember when Martina said she will never cover anything in bricks again after the castle diorama? Well… it was just hilarious to see her say we will cover it all in bricks.
as a handcrafter i tell you a secret. even we are so annoyed with some stuff and tell everybody we never ever do this again, we will do it again. not that often but we will do it :D cause the endresult is what makes us happy and proud :D
My wife has built doll-houses as a hobby and she is quite impressed with your final product and has a full comprehension of just how involved a project it was. And as far as we are concerned it is "mind-blowingly fantastic."
I've been building PCs for thirty years, and terrain for somewhat less than that, and never once did I consider the possibilities of the confluence of those hobbies. Mind fully blown.
@@recoveringsoul755 Why would it be illegal to have things not being RF shielded? The only downside to not shield is that you experience interference on your own machine..
@@soulextracter interfering with other devices, if you're in an office setting I can see a reason for it. (Lol, love your user name. Was mad when I used to have two passwords, one for Google and one for TH-cam. Now anyone who can watch my videos also has access to my email? Wtf?)
I’m an architect & what you just built really gives the best definition of architecture. You just combined art as an artist & technology as a computer tech/builder. You are the first who thinks outside the box on why a PC should always be in a cuboid enclosure. You had fun. Bravo! Hats off & Congrats!
as an architect, how well do you think this "building" is ventilated? I know it might not matter because I love how it looks, just a curious question from me :)
I am a computer programmer and technician but in 50 years of work I have never seen anything like this ... I hope it does not give you any technical problems, because on an aesthetic level it is simply fantastic !!!
Unsolicited list of things I love: Every time Martina says "I think this is the coolest thing I've ever made!" Seeing Martina running around outside being shady/creepy The new work/shoot space Love seeing you guys flourish! Aloha from Hawaii!
I wonder if she remembered to add the thermal paste to the CPU’s as I don’t remember her mentioning adding it though it might not matter if it’s just for editing
You have completely blown my world wide open with the whole "a computer tower doesn't have to look like a computer tower" thing! Talent, Positivity, Creativity, Fun... Nerdforge has it all! Thanks for the incredible content!
Yeah she says things like that all the time. She should really stop downplaying herself. I don't think she understands just how amazing she truly is. She's one of the most multitalented and skilled people I've ever seen. Literally every project she does comes out spectacular.
Imagine an internet cafe but all the pcs are variants of this case and the whole room takes on the aesthetic of them. Would take a lot of work but dang would that look awesome!
and hell to maintain and clean...the only thing this is good for, is an exposition or an event for computer hardware related stuff, otherwise completely useless.
As someone who has built more computers than I care to count, I think my favorite part of the assembly was you touching the copper pipes to discharge the static. Most people ignore this, and few know just how much damage static can do to components (ISO-9001 certification). Kudos on a great build. Welcome to the modding community.
Static does almost nothing to the PC components as Electroboom and LTT did demonstrate. If something "had died from static" it wasn't static that had killed it, it was something else that was the reason for the death. Bad component, shoddy trace, damaged chip, etc.
@@Vladimir_Kv Yeah, but it's not hard to do and if it can remove any chance to break expensive components, I would always do it. Even if it's not likely to do anything.
If you cycle the power once or twice without a plug in it does the exact same thing as "discharging" every step or "wearing a static band" which totally wasn't an attempt to sell people useless stuff.... in effect you could willfully try to build static into the part and the grounding of the psu would in essence negate it...
Used to do crazy shit like this before I got a "real job". Now the only happiness I get is by watching you and jazza... Thank you for everything that you do.
@@koreenagetchell7657 i personally dont believe in making your hobbies a real job. stress and frustrations are part of a real job. A hobby is a way to scape that shit. lol I love photography as a hobby but i would probably hate it if i had to start doing it as a job lol 😂
Martina: “I’ve never built a computer before!” Proceeds to build the most epic computer setup I’ve ever seen. Also, throwback to LAN parties!! Hahaha I doubt that kids still do that. We must be old! 😂
@@DreamCatcherNightcore A LAN is a local area network in IT. A LAN party is usually when a group of friends or a group of people would get together to create a LAN using ethernet cables and then play games together :)
Great build! I would just advise, for such a "case", to make both fans suck in the air creating a positive pressure with a fine steel mesh (or so) as dust filter. If you have most fans blowing air outside, creating a negative pressure, all windows and small kracks and holes will start to collect dust. With a positive pressure only the two fans will get a bit dusty but all other places will just vent out warm air. Just some long term advice ^^.
Also need to mention that the power supply is "backwards". Than fan pointing inside the case is the "exhaust", it should be pointing outside (which, in this case would mean raising the whole house on some kind of feets)
You'll never find a master of any craft, who give themselves the correct amount of credit for their work. They will _always_ devaluate their own work. Always. And they won't ever consider themselves as masters, despite everyone else who watches them, consider them as such
0:29 “I choose to see no downsides” is my new third favorite quote, right behind “If the weather can’t be nice 2 days in a row, neither can I” and “If nobody comes from the future to stop you, how bad of decision can it really be”
Well it works and most certainly looks amazing, but she did quite a few mistakes. You usually finish up the motherboard except AIO and GPU outside of the case. The biggest oof is propably that she removed the cpu cover, which is supposed to pop out when you push down the lever, you can see it at 15:56 it's still there and after the cut it's removed. She also forgot some peels and only one intake on the MB/GPU compartment which is not even directed at the GPU is definetely not sufficient. The PSU fan is inside of the compartment and therefore relies soely on negative pressure intake which will suck in dust and is inefficient.
This build is breathtaking, you should make a desk setup where the monitor and peripherals also have this medieval esthetic. The one thing I would personally add is a bit more greenery. Outstanding build!
oh sure, it's not enough for the computer to be made of wood which is a flammable material anymore, let's add more plastic to it, it seems like a great idea
@@wsapalas It's a computer not an oven, wooden patios don't catch fire even if they are exposed to a scorching summer sun. Anyhow, your computer will shut down if it reaches temps deemed dangerous for the hardware, as my old ass AMD cpu showed me will trying to survive a gaming session in a hot summer night. Plus, many PC parts have plastics already (like the case of a graphics cards, the racks for some hard drives, the plastic around cables...) Unless you decided to watercool your computer with gasoline, there's really nothing wrong. Best exemple is how you can carry a computer in your pocket without it catching fire even though its completely in a plastic case (e.g. your smartphone)
@@Davmm96 The question is not that it will catch fire, the question is if it catches fire, it is still an electronic component subject to failures, many modern Samsung cell phones exploded for no reason, so besides the question that the colder the processor works the better , there is still the question that if it has a short circuit or some fault it will not be wrapped in a flammable material, besides the wood absorbs heat, comparing a computer with a wooden patio is like comparing a car with a broom.
Novelty house aside, a case split into different "floors" might actually make a lot of practical sense for certain builds. I can imagine some kind of ultra-graphics workstation or supercomputer being setup in this way. The different chunks might look cool as well.
for something that is more marketable, or with more budget having a server than can be extended via modules with all of the connectors just clicking into place would be amazing. need an extra graphic card and more storage ? just click on a new module like if you were building legos !
@@bensunnyisaac Yeah, gotta love that Alt+0174. I have a few of those memorized, so I guess I'm nerdy, but a true nerd wouldn't have misspelled "Lots" like I did. 😄
This is by far one of the best and most skilled builds I've ever seen, your artistic skills are insane. Thank you for sharing such an amazing thing. The details in the cosmetic and functionality are off the charts. Just plain awesome!
@@FatDancer08 Local Area Network.. Basically: Friends bringing their PC's at one person's place to play games together. Or any device really and play 'local' together on the same network.
@@FatDancer08 Grandpa: back in my day when you wanted to play multiplayer games without lag you would have to bring your whole PC and monitor to a friends house. Connecting the PCs with a hub or router for a wired direct connection aka LAN or Local Area Network :)
@@FatDancer08 so now find another 5-10 like you bring computers to one common place and arrange a LAN party LAN party, a more unique event when you can easily "strangle" a team player when he messes up 😂
Martina, I have created, crafted, painted, et al for the past 50+ years and I so enjoy watching you plan & create your projects. You have an artists sensibility & the way you creatively make your vision come to life using a variety of mediums shows your mastery. May you have many many more years to populate your surroundings with art & bless those lucky enough to witness & share it. Kudos!
sis not only BUILT a pc, she made it look like a fantasy book like house where a family of wizards live. this is the most amazing thing I've ever seen anyone make. GREAT JOB!!!
I know I say this on every project, too, but: Incredible! This would be an awesome “miniature” all on its own, but there is an entire water cooled PC in there!! How your mind works is just amazing. The details are EVERYTHING. The paint job is so beautiful. Just fantastic. I’d like to see you maybe create a matching screen surround, a resin keyboard (you can buy the molds now), and a custom mouse to compete the set up!
I am always amazed. One time it looks great, then she ads dark and it looks coller, then she ads the brown wash and it looks EVEN MORE cool and adds and adds more and more and it still gets better and better
This is the most genius, amazing thing, there is... I dunno, I think that's about as accurate as my words will get. You guys are insane haha. What a project!!! Bravo. 🙂
SRSLY, SO INGENIOUS. makes you wonder why the pc industry doesn't do stuff that don't necessarily cater to the cyberpunk aesthetic only, there's so much you can do and so many styles to explore and offer
@N W any item in your room probably caters to who you are and wish to be as a person, and that does not exclude your computer if it works great but it also caters to your general aesthetic and personality then there's nothing wrong with that making it about gender and stereotype is actually a little ignorant ngl, maybe check yourself, take a moment to reflect on your views around ppl man
When 'Particle Emission' from Silver Maple started playing in the background ( 1:45 ) for a few seconds, I instantly knew that I had to stay for the entire video. Then I watched another one. And another one. Now I'm officially hooked. Not just because of your amazing videos and your choice of background music, but because your work is truly amazing in every aspect. Thanks, @Nerdforge; your channel is - at least for me - one of the most entertaining on here.
Do not sell your self short. You are very talented. The build that you did is outstanding. I really enjoyed watching you do this. I am totally sure that, it will encourage others to do this. Thanks again for your time and taking us along on this project.
I thought the disco lights were throwing off the aesthetics, but then I thought hey, that could be a wizard’s house and he has a portal to another dimension in his living room 😂 Amazing build as always! 🤩
I just found your channel (TH-cam recommended that to me) and I love everything you guys do. Creativity, professionalism , DIY, painting, dioramas, re-binding books, PC-build and stuff like that. Now, you have a loyal follower from Hungary too. My best wishes. Your are adorable, Martina. I love your fancy hair colors and so on...
This has to be the most creative PC case I've ever seen that was built from scratch. I really love it. They way you made the bricks, and your painting skills are incredible.
Ok, never seen your channel ever, but this honestly scratches so many itches. Love seeing PC builds, and this is honestly one of the best out there, despite it being your first time. Then there's the commitment to craft. I kinda think my next PC build will be in something like this. Just need to get on with removing some of my 3.5" drives so I only have to deal with a few.
This could be a whole new trend for pcs, someone doing this kinds of PCs would hardly have any competition. I'm already imagining the $20-50k price tags on these... And they could be marketed as furniture...
To be honest, you are so right. I mean, this piece of art IS furniture at its most beautiful. This could become a niched brand and maybe the actual pc-tower might become the most expensive part of a PC-build and that says something, when you have the current prices of graphics cards for a comparison.
My eyes: It's garden spade. My brain: It's a garden spade. My soul: It's a mic. Martina is so convincing that I get surprised her voice is still as loud as normally when she moves the spade further away from her mouth. Anyone else?
Martina: Creates from scratch, one of the most amazing model fantasy buildings I have ever seen... Also Martina: "It might not be mind-blowingly amazing as I wanted it to be..." The humility is astounding!! 🤯
I have become hooked on your videos since accidentally finding them! WHAT A WONDERFUL CHANNEL! And so skilled, so creative, so intelligent, so talented, so...let's just say I love everything that Martina does. Time to hit the shop for a hoodie. :)
I don't have enough words to tell how inspiring this is. If I ever feel blue and run out of ideas, I just watch some of your videos and immediately feel the urge to create something beautiful.
Little Tip from a PC-Nerd: If you make a Video about PC-Builds, allways put the components into the desription. Now that this is out of my head, I can enjoy your amazing Idea of combining the world of two nerd related topics.
Wow, what an amazing and beautiful build. Allways stunned by your art projects. Would be interessting to see a stress test with temperatures of this build.
Yeah, gf just sent this to me saying if I wanted to build a computer I needed to do this. Because we all have what looks to be 3k laying around! I need the parts list :(
@@abird5575 the components, apart from the GPU, are a couple of generations behind by now, but these are the specs: MSI z490 Ace Motherboard Intel Core i9 10850K 64GB Corsair Dominator Platnum RGB 3200 MHZ 1TB Corsair MP400 SSD Corsair RM850 PSU ASUS ROG Strix 3070 Ti Corsair H150i 360mm AIO CPU Cooler
The PC looks absolutely incredible! One question i have for behind the forge is what your thoughts are on the materials holding up to the heat from the components over time as pcs can get quite hot
There is such a huge volume of air and good airflow (at least if all the fans are mounted so they co-operate) that it won't get warm in there really, I'd guess air temps in that case will be something like 30C max for a 20C ish room, and honestly I'd expect the air temp in there to be nearly ambient, its rather better ventilated than any steel PC case I've ever seen, even the largely mesh ones tend to use a much finer more restrictive mesh - so that just leaves the exhaust air temp being too high, but as the bulk of that should come out the back side even if it does soften the hot glue (and it would have to be the very low temp hot glue) who cares..
@@ptowzapotato4157 at least for the wood angles/joints she was also using nails... So I think they should be fine at least... Donno about the foam, but I think the build has enough cooling.
I love watching Nerdforge videos! I get so inspired every time I see the amazing creativity in every projects you guys create. Thank you for doing what you!
I am seriously in love with the people at NERDFORGE! What they do and can do is So far away from I can do it's MINDBLOWING, they might as well be flying to Mars on their Magic Carpet, I'm So AMAZED with what they do, Thank You!!
You should make a house just like that, but add an interior. Then when you take apart the layers you can look at it. In fact you could make a whole civilization with a lot of tiny houses
One way to avoid individual bricks is to carve out stone patterns from one large piece of Styrofoam using a hot knife. You can then attach the panel to the structure as one piece. I don't know if my description is accurate enough so you can see it in your head.
Very cool to see, not just the computer built into the model (which is amazing!), but the planning process and techniques for such a large piece of terrain all together in one video.
Your artistic vision and execution blows my mind every time. This was so amazing to watch. You didn't just mod a case, you literally created a case. I would love something like this for my own system. Keep doing what you do. You are VERY talented.
I could see this on a desk that’s designed to be a backdrop for the house. Scenery and clever tricks to make everything computer blend into something more organic. Great job!
Ooo. You could replace the wood between each floor with like latic metal to increase airflow. Probably open some fan slots in the bottom floor to allow fan intake then have the roof shingles have gaps to alow air to flow out. Would be a good way to reduce the beat of the system.
This IS the coolest thing you've ever made! Unbelievable how you managed to fit every single piece in there without distorting the proportions of the house. Great work, really inspiring!
I'm so amazed, i mean, i don't even thint about the posibilitie of mount a pc on a structure difrent of a regular gabinet. Thank you for your awesome work
damn i was pretty interested to see how you were gonna pull of the hardline cooling but it was probably a really good call to go with the AIO instead. there's more than enough DIY on this build any way. I swear every time a new layer of detail was added on the paint i would think it looked so realistic then another layer would be added and id realize how goofy it looked with out it. great build.
That is so cool tho, never seen a pc case that looked like that and it’s really unique and it is a piece of art! You guys did an amazing job! The textures and details are amazing and I’m sure they took forever!!! Same with the painting! You should be proud
I love the idea of this house existing in a fantasy world and people being thoroughly confised by the rear of the building having strange black ports and buttons. God knows what would happen if they went inside.
For people worried about the thermals: they actually look great! Might not be obvious to people skipping through, but there are 3 separate floors, each floor has case fans near the windows making for a very efficient air-flow! Not to say it's an optimal setup, but the thermals are better than the off-the-shelf computers we used before!
Hey you guys, this comment is getting buried, I suggest pinning it! Awesome build!❤
Edit: nevermind you got it 😂
Did you apply thermal paste?
As a computer tech, I wasn't worried about the thermals. However if you have to work on anything regarding the motherboard, it's going to be a PITA to work on it, considering you have a large radiator with short wires and hoses fed through that hole. Good luck with that.
When we build our wooden PC case all any one would comment about was the thermals with wood. its like DUDES WE GOT IT lol We promise its working or we wouldnt do it this way! This build is amazing!
Maybe tag a good tech TH-camr, and ask them to have a look? :) My top pick would be Gamers Nexus. They're very busy though. But there's lots of other tech TH-camrs. :) I noticed that some of us had comments about the tech side of the build. But there is no way of knowing who is skilled or not amongst the tech comments.
This is the most Nerdforge thing you have ever built. The blend of modern electronics and medieval fantasy is such a signature of your channel, and it's so great to see you working in your new studio. Plus, a new place to steal gravel from!
the real reason they moved was because they had stolen all the gravel from their neighbours and need a new source of the precious resource! 😜
@@guycullum3927 🤣😭👌
😭💀
Does it matter that one of the fans looks really wobbly?
Remember when Martina said she will never cover anything in bricks again after the castle diorama? Well… it was just hilarious to see her say we will cover it all in bricks.
As soon as she mentioned bricks I was like "Oh no no no no no!" However, she did say in the castle video that she would forget about it in a year lol
This was literally my first thought too, and then she made Hansi do the cutting 😆
But it always looks soooo good! All there hard work and effort pays off in the end and I think that'd why she ends up comming back to it.
as a handcrafter i tell you a secret.
even we are so annoyed with some stuff and tell everybody we never ever do this again, we will do it again. not that often but we will do it :D cause the endresult is what makes us happy and proud :D
My wife has built doll-houses as a hobby and she is quite impressed with your final product and has a full comprehension of just how involved a project it was. And as far as we are concerned it is "mind-blowingly fantastic."
You need to make your whole set up a medieval village. (Make a case for the monitor, maybe a field for the mouse pad and some houses for the speakers)
That’s what I thought
that is all good but how are they gonna do it ?
@@Washed_Goku Make anouther video.
@@CallumMorrison I mean desgin it all with all computer parts
@@Washed_Goku I was thinking just a shell for the stuff.
I've been building PCs for thirty years, and terrain for somewhat less than that, and never once did I consider the possibilities of the confluence of those hobbies. Mind fully blown.
Doesn't it need shielding? Like RF shielding or something to be legal?
@@recoveringsoul755 no, regular cases don't have shielding, all the shielding is in the cables. people make cases out of acrylic and wood too.
@@andrewking2590 wow, things have changed
@@recoveringsoul755 Why would it be illegal to have things not being RF shielded? The only downside to not shield is that you experience interference on your own machine..
@@soulextracter interfering with other devices, if you're in an office setting I can see a reason for it. (Lol, love your user name. Was mad when I used to have two passwords, one for Google and one for TH-cam. Now anyone who can watch my videos also has access to my email? Wtf?)
Imagine working in a PC Service shop and a girl with multicolor hair brings you a house and tells you "my computer needs some service".
I think at that point it'd be better if it were a house call. 😉
Funny thought, but if she built that I doubt she'd need someone else to service it...
I would immediately think she is a hacker from the 90's
@@monster6236 nothing in the video suggests she's good at software though
@@douglasdalini4932 Exactly. She even said that she's never built a computer before now.
Kind of looks like Sauron peering out from his vacation cabin in the front :D Love this build!
IT DOES! 😂
My though exactly! Like the eye of Sauron was on a weekend trip in a cabin in the woods 😆
It's like a Tudor Barad-dûr!
Taking "home computer" to a whole new level, well done! Just wow..
How many windows does it have?.
@@reevus01 10 with eligibility for 11. (further PUNishment included) 😝
18:09 We installed windows!
I’m an architect & what you just built really gives the best definition of architecture. You just combined art as an artist & technology as a computer tech/builder. You are the first who thinks outside the box on why a PC should always be in a cuboid enclosure. You had fun. Bravo!
Hats off & Congrats!
many people have built pc's that are not a box, some even built pc's that are not even enclosed at all
as an architect, how well do you think this "building" is ventilated? I know it might not matter because I love how it looks, just a curious question from me :)
@@TuanNguyen-zy4ce well you see, an average house doesn't have huge rgb fans blowing out its windows, but aside that yeah its pretty well ventilated
Definetly not the first who thinks outside the box 😂 but i agree with everything else
@@TuanNguyen-zy4ce have you ever lived in a big old house like this? they're as draughty as hell :)
At first I was like: "Those are some serious artistic skills for a tech channel"
Until I realised, this is not a tech channel lol
The CPU being installed wrong was a dead giveaway that this was not a tech channel.
I see I am not the first soul to find themselves lost here.
ohhh LOLOLOL I was sincerely confused
I just realized that after reading your comment lol
SURPRISE NERD FORGE. hate when that happens
I am a computer programmer and technician but in 50 years of work I have never seen anything like this ... I hope it does not give you any technical problems, because on an aesthetic level it is simply fantastic !!!
My concern is the magnets. Could they be a problem?
@@gaiasguardian205 not with solid state drives. only spin drives could possibly be affected and even then, they have powerful magnets built in those.
I’m a bit concerned about the temps of the GPU and power supply, but I think they’ll be «fine».
I've always been told that magnets and computers don't mix, so yeah, I flipped out about that too!! XD
@@gaiasguardian205 agreed. I flipped, but when I read this, I relaxed. Thanks for sharing a concern, fam! XD
this is the coolest PC ever omfg
Loserfruit :o
check out the LTT x Nerdforge PC on Linus Tech Tips XD
and the worst staircase to walk up to the door ^.^
with no air flow )
@@dvgsundid you even watch the video lol
The best thing is, if anyone ever breaks in, they’ll never know that it’s a computer
Except for approx 1.25M people who know exactly what it is and so what of wanna have it xD
I would definitely steal this rather than Pc
Yeah sure ... all them cables and the monitor ...
Burglers don't steal towers
They steal ipads laptops and such
Idk if I saw a house with some RGBs I'd at least check it out
Incredible. What an outstanding project! Most fun PC I’ve ever seen. (P.S. you should do an accompanying monitor)
That’s the same thing I was thinking! That would be awesome!
You read my mind 😱
and accompanying keyboard with custom caps!!
Hi Boylei!! Good to see you around here😍😍Love your videos too!! Have some kind of collaboration with Martina someday!! It would be awesome🤩🤩
The monitor could be a window or a mirror on a wall :)
Unsolicited list of things I love:
Every time Martina says "I think this is the coolest thing I've ever made!"
Seeing Martina running around outside being shady/creepy
The new work/shoot space
Love seeing you guys flourish! Aloha from Hawaii!
Also adorable when she accidentally touched the hot water pipe.
Someone: How about the airflow?
Nerdforge: Well, I need to study civil engineering.
Someone: But it's a PC.
Nerdforge: Yes.
Imagine working at a tech store and Martina comes in with a house saying "Hi, can you fix my PC please. "😂
🤣
I wonder if she remembered to add the thermal paste to the CPU’s as I don’t remember her mentioning adding it though it might not matter if it’s just for editing
You have completely blown my world wide open with the whole "a computer tower doesn't have to look like a computer tower" thing! Talent, Positivity, Creativity, Fun... Nerdforge has it all! Thanks for the incredible content!
It's called a tower? Now I want to see someone build a wizard tower for their pc lol
@@moonlightwolf Yea the larger cases are called towers. Micro-ATX cases are just cases still as far as I know.
I have seen many PCs built into desks yet never thought of building one as an art piece. This is a great idea.
The lights behind the windows make it look like a witch or wizard’s crazy experimental workshop! Very on brand for Nerdforge :)
Yeah I was thinking they should try a pulsing style light pattern to make it seem more magical
And add a couple of wizard figures
"Might not be mind blowingly amazing"
*BLOWS EVERYONES MIND ON HOW AMAZING IT IS*
Yeah she says things like that all the time. She should really stop downplaying herself. I don't think she understands just how amazing she truly is. She's one of the most multitalented and skilled people I've ever seen. Literally every project she does comes out spectacular.
Imagine an internet cafe but all the pcs are variants of this case and the whole room takes on the aesthetic of them. Would take a lot of work but dang would that look awesome!
Heh, like a giant Thomas Kinkade + D&D village. It would be epic for LAN parties.
Do kids still LAN party.???
and hell to maintain and clean...the only thing this is good for, is an exposition or an event for computer hardware related stuff, otherwise completely useless.
Imagine how long it would take before someone broke one of them... xD
@@JaSon-wc4pn do you know what eSports is? LOL you act like LAN parties are ancient. Go outside.
The most important part: "it's gonna be fun to make." That is why I watch your videos, you build what you want and have fun.
As someone who has built more computers than I care to count, I think my favorite part of the assembly was you touching the copper pipes to discharge the static. Most people ignore this, and few know just how much damage static can do to components (ISO-9001 certification). Kudos on a great build. Welcome to the modding community.
I don't know. Linus made that video about it where it was kinda hard tp break anything with static
Static does almost nothing to the PC components as Electroboom and LTT did demonstrate.
If something "had died from static" it wasn't static that had killed it, it was something else that was the reason for the death. Bad component, shoddy trace, damaged chip, etc.
@@Vladimir_Kv Yeah, but it's not hard to do and if it can remove any chance to break expensive components, I would always do it. Even if it's not likely to do anything.
It's a one-second step to remove a .1% chance of damaging a $100-1000 component, i.e. always worth it.
If you cycle the power once or twice without a plug in it does the exact same thing as "discharging" every step or "wearing a static band" which totally wasn't an attempt to sell people useless stuff.... in effect you could willfully try to build static into the part and the grounding of the psu would in essence negate it...
Used to do crazy shit like this before I got a "real job". Now the only happiness I get is by watching you and jazza...
Thank you for everything that you do.
You could make this your real job like she did 😁
Weekends and vacations will save you from the horrors of adulthood. Never growup my friend.
Same!!!!!!!
@@koreenagetchell7657 i personally dont believe in making your hobbies a real job.
stress and frustrations are part of a real job.
A hobby is a way to scape that shit. lol
I love photography as a hobby but i would probably hate it if i had to start doing it as a job lol 😂
@@mystupidfacebook how to hate life
Martina: “I’ve never built a computer before!”
Proceeds to build the most epic computer setup I’ve ever seen.
Also, throwback to LAN parties!! Hahaha I doubt that kids still do that. We must be old! 😂
Can I ask what a LAN party even is?
I'm curious too :0
@@DreamCatcherNightcore A LAN is a local area network in IT. A LAN party is usually when a group of friends or a group of people would get together to create a LAN using ethernet cables and then play games together :)
There are still big LAN parties with hundreds of players, mostly without kids 😁
It's not the same though, not an "at home" thing anymore
Maybe it doesn't count cause we're all in our 20's but my group would do a lan party if we all had the time for it
Great build! I would just advise, for such a "case", to make both fans suck in the air creating a positive pressure with a fine steel mesh (or so) as dust filter. If you have most fans blowing air outside, creating a negative pressure, all windows and small kracks and holes will start to collect dust. With a positive pressure only the two fans will get a bit dusty but all other places will just vent out warm air. Just some long term advice ^^.
Also need to mention that the power supply is "backwards". Than fan pointing inside the case is the "exhaust", it should be pointing outside (which, in this case would mean raising the whole house on some kind of feets)
@@ShadeAkeley no it's not. PSUs push air out the back. It's installed correctly.
I don't think you give yourself enough credit, i have watched several of your projects and these are absolutely stunning
You'll never find a master of any craft, who give themselves the correct amount of credit for their work. They will _always_ devaluate their own work. Always. And they won't ever consider themselves as masters, despite everyone else who watches them, consider them as such
The best part is that when the computer becomes old and outdated, you still have a stunning art piece to keep.
or you just upgrade it...? It's a PC not a fucking console
@@FaySmash damn why do u sound angry
@@chvrrvism3833 It's why people love PC's. The most positive part.
then it becomes a server and you call it the house of knowledge
This PC literally has windows installed. Jokes aside this is one of the coolest builds I've ever seen on YT.
I typically use my Mac to prevent my windows from slamming shut when I open them. I'm very thankful Apple built Macs to support Windows.
The fact that your painting holds up to close ups says everything about your skill as an artist. It's stunning.
0:29 “I choose to see no downsides” is my new third favorite quote, right behind “If the weather can’t be nice 2 days in a row, neither can I” and “If nobody comes from the future to stop you, how bad of decision can it really be”
Martina: Ive never done this before
*proceeds to do the thing perfectly
Well it works and most certainly looks amazing, but she did quite a few mistakes. You usually finish up the motherboard except AIO and GPU outside of the case. The biggest oof is propably that she removed the cpu cover, which is supposed to pop out when you push down the lever, you can see it at 15:56 it's still there and after the cut it's removed. She also forgot some peels and only one intake on the MB/GPU compartment which is not even directed at the GPU is definetely not sufficient. The PSU fan is inside of the compartment and therefore relies soely on negative pressure intake which will suck in dust and is inefficient.
Honestly, I don't care that this is "extra" I would just stare lovingly at my PC all day if I had a desktop like this. Amazing work as always!!
This build is breathtaking, you should make a desk setup where the monitor and peripherals also have this medieval esthetic. The one thing I would personally add is a bit more greenery. Outstanding build!
oh sure, it's not enough for the computer to be made of wood which is a flammable material anymore, let's add more plastic to it, it seems like a great idea
@@wsapalas It's a computer not an oven, wooden patios don't catch fire even if they are exposed to a scorching summer sun. Anyhow, your computer will shut down if it reaches temps deemed dangerous for the hardware, as my old ass AMD cpu showed me will trying to survive a gaming session in a hot summer night.
Plus, many PC parts have plastics already (like the case of a graphics cards, the racks for some hard drives, the plastic around cables...)
Unless you decided to watercool your computer with gasoline, there's really nothing wrong. Best exemple is how you can carry a computer in your pocket without it catching fire even though its completely in a plastic case (e.g. your smartphone)
@@Davmm96 The question is not that it will catch fire, the question is if it catches fire, it is still an electronic component subject to failures, many modern Samsung cell phones exploded for no reason, so besides the question that the colder the processor works the better , there is still the question that if it has a short circuit or some fault it will not be wrapped in a flammable material, besides the wood absorbs heat, comparing a computer with a wooden patio is like comparing a car with a broom.
Novelty house aside, a case split into different "floors" might actually make a lot of practical sense for certain builds. I can imagine some kind of ultra-graphics workstation or supercomputer being setup in this way. The different chunks might look cool as well.
for something that is more marketable, or with more budget having a server than can be extended via modules with all of the connectors just clicking into place would be amazing.
need an extra graphic card and more storage ? just click on a new module like if you were building legos !
This is awesome!!
When's the next video?
It is, your Art is awesome2! ☺
Hi Gawx!! Estoy esperando tu nuevo video! Me encantan!!!! Espero que hasta pronto! Saludos 😁🥳
Finally, a true "home" computer, and it has Windows®! Lot's of them! I love it! Great job!
Love the Registered trademark in the comment. LOL. You, sir/ma'am, are a true nerd.
@@bensunnyisaac Yeah, gotta love that Alt+0174. I have a few of those memorized, so I guess I'm nerdy, but a true nerd wouldn't have misspelled "Lots" like I did. 😄
but are there 10 windows?
@@FrVitoBe 10 or 11, but every one of them is a pane in the glass. 😉
i C what u did there!!!
This is by far one of the best and most skilled builds I've ever seen, your artistic skills are insane. Thank you for sharing such an amazing thing. The details in the cosmetic and functionality are off the charts. Just plain awesome!
Wow, thank you!
I'm glad you water-cooled it because I was mostly concerned about how well it would be ventilated.
This project gives a whole new meaning to "Home PC".
nice.....very nice
Imagine bringing this to a LAN party… sheesh you had to bring your whole house didn’t you!? :)
:D:D:D:D:D
@@FatDancer08 Local Area Network.. Basically: Friends bringing their PC's at one person's place to play games together. Or any device really and play 'local' together on the same network.
@@FatDancer08 Grandpa: back in my day when you wanted to play multiplayer games without lag you would have to bring your whole PC and monitor to a friends house. Connecting the PCs with a hub or router for a wired direct connection aka LAN or Local Area Network :)
Brings new meaning to bringing everything with you, including the kitchen sink! 😆
@@FatDancer08 so now find another 5-10 like you bring computers to one common place and arrange a LAN party
LAN party, a more unique event when you can easily "strangle" a team player when he messes up 😂
Ok, yeah.
You've officially reached goddess status. This build is completely out of the park.
Oh yeah, I’ve long ago stopped believing this channel is run by mortals
@@bagandbroad i'm discovering it with this video, now i'm dying
Nothing gets me more excited than a table full of new pc components
Martina, I have created, crafted, painted, et al for the past 50+ years and I so enjoy watching you plan & create your projects. You have an artists sensibility & the way you creatively make your vision come to life using a variety of mediums shows your mastery. May you have many many more years to populate your surroundings with art & bless those lucky enough to witness & share it. Kudos!
sis not only BUILT a pc, she made it look like a fantasy book like house where a family of wizards live.
this is the most amazing thing I've ever seen anyone make. GREAT JOB!!!
I know I say this on every project, too, but: Incredible! This would be an awesome “miniature” all on its own, but there is an entire water cooled PC in there!! How your mind works is just amazing. The details are EVERYTHING. The paint job is so beautiful. Just fantastic.
I’d like to see you maybe create a matching screen surround, a resin keyboard (you can buy the molds now), and a custom mouse to compete the set up!
A wizard lives in that house, and he REALLY likes casting fireball.
The lights coming from inside kinda makes it look like some witch is trying to make spells or potions in the house! This is mind-blowingly AMAZING!!!
Can we just take a moment to appreciate how amazing Martina is at painting?
I am always amazed. One time it looks great, then she ads dark and it looks coller, then she ads the brown wash and it looks EVEN MORE cool and adds and adds more and more and it still gets better and better
I am mostly amazed at how fast she paints, it's almost as if they sped it up 😁
This is the most genius, amazing thing, there is... I dunno, I think that's about as accurate as my words will get.
You guys are insane haha. What a project!!! Bravo. 🙂
Oh yeah, I fully agree! 🤘💯🔥😀
You say pastoral joke😂😂😂😂
SRSLY, SO INGENIOUS. makes you wonder why the pc industry doesn't do stuff that don't necessarily cater to the cyberpunk aesthetic only, there's so much you can do and so many styles to explore and offer
@N W any item in your room probably caters to who you are and wish to be as a person, and that does not exclude your computer
if it works great but it also caters to your general aesthetic and personality then there's nothing wrong with that
making it about gender and stereotype is actually a little ignorant ngl, maybe check yourself, take a moment to reflect on your views around ppl man
@@cal.icopen thank u lol. Ppl just had to make it about her gender lol
When 'Particle Emission' from Silver Maple started playing in the background ( 1:45 ) for a few seconds, I instantly knew that I had to stay for the entire video. Then I watched another one. And another one. Now I'm officially hooked. Not just because of your amazing videos and your choice of background music, but because your work is truly amazing in every aspect. Thanks, @Nerdforge; your channel is - at least for me - one of the most entertaining on here.
Do not sell your self short. You are very talented. The build that you did is outstanding. I really enjoyed watching you do this. I am totally sure that, it will encourage others to do this. Thanks again for your time and taking us along on this project.
Where can one buy that talent, in making such wonderfull buildings?lol!! this is wonderfull to watch...she's absolutely a Talent !!!
I thought the disco lights were throwing off the aesthetics, but then I thought hey, that could be a wizard’s house and he has a portal to another dimension in his living room 😂
Amazing build as always! 🤩
Wizard rave!
There’s your personalisation idea if you want to do your own. A Wizard’s PC Tower 😁
I was thinking to myself "it would be nice if there was lighting inside to look like fires" and then you set the lighting on the fans... perfect.
I just found your channel (TH-cam recommended that to me) and I love everything you guys do. Creativity, professionalism , DIY, painting, dioramas, re-binding books, PC-build and stuff like that. Now, you have a loyal follower from Hungary too. My best wishes. Your are adorable, Martina. I love your fancy hair colors and so on...
This has to be the most creative PC case I've ever seen that was built from scratch. I really love it. They way you made the bricks, and your painting skills are incredible.
Ok, never seen your channel ever, but this honestly scratches so many itches. Love seeing PC builds, and this is honestly one of the best out there, despite it being your first time. Then there's the commitment to craft. I kinda think my next PC build will be in something like this. Just need to get on with removing some of my 3.5" drives so I only have to deal with a few.
Scale Builder's Guild did a pretty cool one, his editing PC is in a scale radio control semi truck
This could be a whole new trend for pcs, someone doing this kinds of PCs would hardly have any competition. I'm already imagining the $20-50k price tags on these... And they could be marketed as furniture...
Never though of that. You have vision boi
To be honest, you are so right. I mean, this piece of art IS furniture at its most beautiful. This could become a niched brand and maybe the actual pc-tower might become the most expensive part of a PC-build and that says something, when you have the current prices of graphics cards for a comparison.
20k loool
I don't know what I'm most impressed with, the idea, the design, the realization... WOW. Great job!
Martina: Running and hiding.
Me: Is she stealing gravel again.
Martina: She is stealing gravel again.
Love the build!!
My eyes: It's garden spade.
My brain: It's a garden spade.
My soul: It's a mic.
Martina is so convincing that I get surprised her voice is still as loud as normally when she moves the spade further away from her mouth. Anyone else?
I spent half a year thinking the spade was "hiding" a mic, that she was holding both.
I think, she has a Lavalier mic attached hidden under her shirt^^
ZHC: customizes stuff
Martina: look what he needs to mimic a fraction of my power
*builds entire pc casing from scratch*
Every time I thought the paint job looked awesome you put another layer on it and made it look more awesome.
I'm pretty excited about this video, I saw the thumbnail and I thought "that's a pc?"
Same 😭✅
Same it was like wait WHAT
my exact words
Martina: Creates from scratch, one of the most amazing model fantasy buildings I have ever seen...
Also Martina: "It might not be mind-blowingly amazing as I wanted it to be..."
The humility is astounding!! 🤯
I would LOVE to have a PC like that sitting on my desk! Excellent work. =D
It would love to have a desk big enough for that ;-)
@@arnvonsalzburg5033 Agree. Mine is custom made too, with a red Front. My Room is pretty cramped and it needed to fit under the Desk
@@arnvonsalzburg5033 The feels 😂😭
I have become hooked on your videos since accidentally finding them! WHAT A WONDERFUL CHANNEL! And so skilled, so creative, so intelligent, so talented, so...let's just say I love everything that Martina does. Time to hit the shop for a hoodie. :)
It’s just lovely ❤
THIS IS SO AWESOME!!! 😲 3 weeks well spent!
I'm sure that you guys would win a PC Custome Contest if you Bring this masterpiece.
Amazing work.
At the 12:00 mark I was jacked to the tits about how awesome this building was. *Then I remembered that a computer is going to go inside.*
I LOVE YOUR POKÉMON MODELS
That's no fire inside if the building, it's the eye of sauron on his day off.
I don't have enough words to tell how inspiring this is. If I ever feel blue and run out of ideas, I just watch some of your videos and immediately feel the urge to create something beautiful.
She took playing Minecraft on her computer to an whole other level.
I guess you could say she made a "smart house" ?
Little Tip from a PC-Nerd: If you make a Video about PC-Builds, allways put the components into the desription.
Now that this is out of my head, I can enjoy your amazing Idea of combining the world of two nerd related topics.
Wow, what an amazing and beautiful build. Allways stunned by your art projects.
Would be interessting to see a stress test with temperatures of this build.
Yeah, gf just sent this to me saying if I wanted to build a computer I needed to do this. Because we all have what looks to be 3k laying around! I need the parts list :(
@@abird5575 the components, apart from the GPU, are a couple of generations behind by now, but these are the specs:
MSI z490 Ace Motherboard
Intel Core i9 10850K
64GB Corsair Dominator Platnum RGB 3200 MHZ
1TB Corsair MP400 SSD
Corsair RM850 PSU
ASUS ROG Strix 3070 Ti
Corsair H150i 360mm AIO CPU Cooler
It's a little like traveling back in time to where computers we're large like rooms. Really great. Love it.
I honestly expected this to open like a doll house. Not gonna lie, I think hinges would be safer than magnets.
The PC looks absolutely incredible! One question i have for behind the forge is what your thoughts are on the materials holding up to the heat from the components over time as pcs can get quite hot
Yeah I'm especially conserned about the hot glue and the foam, I'm hoping the water cooling will help keep thermals down enough tho
There is such a huge volume of air and good airflow (at least if all the fans are mounted so they co-operate) that it won't get warm in there really, I'd guess air temps in that case will be something like 30C max for a 20C ish room, and honestly I'd expect the air temp in there to be nearly ambient, its rather better ventilated than any steel PC case I've ever seen, even the largely mesh ones tend to use a much finer more restrictive mesh - so that just leaves the exhaust air temp being too high, but as the bulk of that should come out the back side even if it does soften the hot glue (and it would have to be the very low temp hot glue) who cares..
@@ptowzapotato4157 i don't think the temps will get anywhere near the melting point of hotglue which is 180°C to 200°C
Water cooling is epic. I have it mine. They might need to reenforce it with metal later.
@@ptowzapotato4157 at least for the wood angles/joints she was also using nails... So I think they should be fine at least... Donno about the foam, but I think the build has enough cooling.
I love watching Nerdforge videos! I get so inspired every time I see the amazing creativity in every projects you guys create. Thank you for doing what you!
I am seriously in love with the people at NERDFORGE! What they do and can do is So far away from I can do it's MINDBLOWING, they might as well be flying to Mars on their Magic Carpet, I'm So AMAZED with what they do, Thank You!!
that paint job is definitely mind-blowingly amazing, along with the rest of the construction.
You should make a house just like that, but add an interior. Then when you take apart the layers you can look at it. In fact you could make a whole civilization with a lot of tiny houses
But think how many _bricks_ they'd have to make :,)
One way to avoid individual bricks is to carve out stone patterns from one large piece of Styrofoam using a hot knife. You can then attach the panel to the structure as one piece. I don't know if my description is accurate enough so you can see it in your head.
Cardboard Aided Design (CAD), always worth a try and generally works very well, especially with the duct tape add-on package 😊
I wish I could do this stuff without these problems:
1. My parents worrying
2. Me not having the resources
Very cool to see, not just the computer built into the model (which is amazing!), but the planning process and techniques for such a large piece of terrain all together in one video.
Try decorating the screen with the same theme so they match, I think that would be very cool!
Your artistic vision and execution blows my mind every time. This was so amazing to watch. You didn't just mod a case, you literally created a case. I would love something like this for my own system. Keep doing what you do. You are VERY talented.
12:09 this looks straight out of a movie/game mindblowing goodjob really
I could see this on a desk that’s designed to be a backdrop for the house. Scenery and clever tricks to make everything computer blend into something more organic. Great job!
I've never even heard of this channel, but this such amazing work. I'm excited to see more!
I'd love to see Martina model a house in the sims and them make it in the studio! :D I love this creative pc!
Ooo. You could replace the wood between each floor with like latic metal to increase airflow. Probably open some fan slots in the bottom floor to allow fan intake then have the roof shingles have gaps to alow air to flow out. Would be a good way to reduce the beat of the system.
This IS the coolest thing you've ever made! Unbelievable how you managed to fit every single piece in there without distorting the proportions of the house. Great work, really inspiring!
I'm so amazed, i mean, i don't even thint about the posibilitie of mount a pc on a structure difrent of a regular gabinet.
Thank you for your awesome work
damn i was pretty interested to see how you were gonna pull of the hardline cooling but it was probably a really good call to go with the AIO instead. there's more than enough DIY on this build any way.
I swear every time a new layer of detail was added on the paint i would think it looked so realistic then another layer would be added and id realize how goofy it looked with out it. great build.
Oh man, with those lights this would look really cool in something like a Cathedral with stained glass. Very cool!
That is so cool tho, never seen a pc case that looked like that and it’s really unique and it is a piece of art! You guys did an amazing job! The textures and details are amazing and I’m sure they took forever!!! Same with the painting! You should be proud
Most obnoxious and super awesome PC case ever. Nice one!
I love the idea of this house existing in a fantasy world and people being thoroughly confised by the rear of the building having strange black ports and buttons.
God knows what would happen if they went inside.
And now you have to build a "portal"-type case for the display and you got yourself a fantasy setup! Great job!
Absolutely! I'd totally love to see it.