Installing New Stair Treads - STAIRTECH from Home Depot - Part 1
ฝัง
- เผยแพร่เมื่อ 28 ก.พ. 2021
- In this video I go over the installation of STAIRTECH stair treads and risers. In part 1 I'll give you all the tips you need to set the risers up and the treads for proper depth, height, and installation per manufacturer recommendations. I've also included some tips and a few hacks to help make a nice tight fit from wall to wall. If you're thinking about recovering your stairs, you're not gonna want to miss this video. It's pack with plenty of information to get you started on day one. Enjoy! All the tools I use are available through affiliate links below. Thanks for all your support. See ya on the next one!
Thank you to all the subscribers and supporters of this channel!
Tools You May Need: (affiliate links below)
Angle Finder
www.amazon.com/gp/product/B07...
Speed Square
www.amazon.com/gp/product/B00...
Nail Puller (cats paw)
www.amazon.com/gp/product/B00...
Pry Bar
www.amazon.com/gp/product/B00...
Hammer
www.amazon.com/gp/product/B07...
Tape Measure
www.amazon.com/gp/product/B01...
White Putty
www.amazon.com/gp/product/B00...
Dark Walnut Putty
www.amazon.com/gp/product/B00...
Other Colors of Putty (in case you do a different color)
Ebony Putty
www.amazon.com/gp/product/B07...
Cherry Putty
www.amazon.com/gp/product/B01...
Light Birch Putty
www.amazon.com/gp/product/B00...
Honey Oak Putty
www.amazon.com/gp/product/B01...
Briarwood Putty
www.amazon.com/gp/product/B00...
Walnut Putty
www.amazon.com/gp/product/B00...
Light Oak Putty
www.amazon.com/gp/product/B00...
16 Color Putty Kit
www.amazon.com/gp/product/B00...
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission (at no extra cost to you of course). This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
Looks awesome! Newbie here. You just help me avoid a costly mistake! Thanks !
Great video, can't wait for part 2
Very informative. Thanks. Great tips too!
I used a dremel saw max and a wood chisel to cut that tread nose off…. Worked great!
Great Video!
Great video! When putting new treads on top of the old treads, is the first, bottom step higher than the other steps?
Wow bro thats crazy, thats alot of work to go through for 1 step. Mine were factory steps. I cut back like 3/4 of an inch. The riser board they gave me were 7 1/4" and my steps were 8" high. Because the stair nose they gave me was not that big. Got all material from Lumber liquidators "core lux flooring". My first time doing flooring sl learing alot, thank you for all the different scenario's. I used the card board trick like you said on transistion's, they were telling me they just glue down all there transistion's they dont use the bracket, but I wanted to use the bracket incase I have to pull the floor up for repair.
What size brad nails are you using to tac the treads in after you apply the glue ahd get the tread in place?
What i'm finding on the home depot webside looks to be about $50ish for the tread and another $15 for the riser. is that roughly accurate? I really want to make our stairs look better, but that's a lot more expensive than I thought it would be
Can you use the treads on the top step instead of the cap to make all steps consistent?
I have raining on the first 5 stairs which are wider than the rest of the stairs. Metal railing goes directly in the step. What can I do?
There skill saw (circular saw for that bud
Video is great but work on improving that sound quality. Sounds like an ASMR video!
Does anyone other than me notice how stupid we are for holding on to our English fractional system of measurement? The metric system is so much easier and is more precise as well.