Install Raid for Free ✅ IOS: clcr.me/Q8ocRO ✅ ANDROID: clcr.me/dkz5Q2 ✅ PC: clcr.me/x8y0SI and get a special starter pack 💥Available only for the next 30 days
Nick Zammeti Hi Nick. As usual your work is stunning. I don't mind what project you do as long as you do it. Your work is a pleasure to watch. Enjoy it and stay safe
Do you have any more of that dehydration crystal stuff? Maybe experiment with drying out other things besides flowers or larger plants and flowers and then putting them in resin and turning them. Or seeing if you can do a spiral turn in either wood or resin or both..... 🤷♀️🤷♀️🤷♀️ Trying to get a water effect from the resin on the inside and then drill a whole and turn a bowl so you can put a small fish tank pump into it and make a fountain. You could even go as far as to make the “stones/pebbles” from resin. Probably silly but just an idea. Oh and put a light in it somehow 🥰
Nick, you must know that you make my world! Even in my busiest of days, I find myself starting and ending my schedule with you. I'm not even a woodturner: I'm a camera-shy bead weaver,polyclayplayer and a kansashi rubonierre. Stay who you are! Life goes in seasons and people will always find a way of finding their way back to you.😊🤗 regardless. You have a wonderful spirit and can't be beat as YTs Greatest Showman and Entertainer! Much Love and Many Prayers that you will stay safe and be well- ~Bethany McKittrick Muah!💋🥰
I'm surviving summer in the South Eastern US, there's a pandemic so I'm alone most of the time, so I could watch you sharpen a pile of pencils while you waffled on about anything but the news and feel happy just to be hanging out with you a little while. But actually, I do like the little projects as much as the big ones. I especially liked the pot with the burl inlay, really beautiful little pieces. Thanks for the video, Nick ♥♥
@Deborah Shaw Thank you for your kind response. I didn't really think that part through and should edit it out. It's not that I don't have food or can't get food really, its that my old man still seems able to forget I have allergies and intolerances to a few common ingredients and often buys more things I can't eat than I can. Stores still close ridiculously early as if COVID is the boogyman and will get them when the sun goes down so that too of course limits access to anything including food. There are a few free giveaways in town we go to now and then because they offer more than food like alcohol, not the kind you drink, and cleaning supplies we still can't get from major department store chains here in town. Thank you again for your kindness, and know I, and many of us, are grateful for people like you who are genuinely trying to help during the pandemic.♥
@@SixRavenEight hey good luck to you! I have lots of food allergies and I know the struggle of finding food in able to eat. I wish you and your community luck and safety bud
@@SixRavenEight I understand completely. I'm diabetic, and so is my husband, he's even on insulin, and alcohol wipes are nowhere to be found. We had to resort to special ordering them through our pharmacy. It cost a lot more, but we need them whenever we test, or when he takes his shots. I too have allergies. I can't eat or touch anything in the melon, pumpkin, squash, cucumber family unless it's been cooked first. And I'm allergic to aloe, detergents, deodorants, aerosol propellant, wool, and most fragrances. Fortunately, none of my allergies cause anaphylaxis, an asthma attack or hives is the worst I have to contend with. I can sympathize with you where finding allergen free products is concerned. So many products have aloe, detergents, deodorants, and fragrances in them that I have to be very careful when I'm out. You didn't say what you are allergic to, or how bad those allergies are, but I can imagine that the Idea of eating out, or even ordering in, is totally off the table for you. Maybe making a list of things you can eat, and that you like, will help your dad remember your special dietary needs when he goes shopping, that's what I do whenever my husband goes to the store for cleaning products and such.
Right!!! Same, I can't believe there are people who don't want him to waffle... that's like the best part. Imagine if you will him doing audio books! 😍🥰😍
Love the burl lid! Any plans to do a big crayon shavings project?! What about a "school supply" clock?! You could mix colored pencils and crayon bits. All the same thanks for all the smile. We love watching you across the pond. Another fun idea would be to turn a "cup of tea"!
Nick, don't know what I'd do without you and Charlie. You're a brilliant artist and craftsman as well as a fabulous standup comic. Appreciate the time and effort that you put into each video. Thanks a million, and Blessings to you and Charlie!
I love your talking bits almost as much as watching the wood on the lathe. You are very entertaining. I'd have to say my favorite videos are your experiments when you have no clue how they will turn out. Keep up the good work Nick, I'm always looking forward to the videos.
Nick, you gotta be the king of "dad jokes". I bet your kids roll their eyes at you dad jokes, which makes dad jokes very worthwhile. Waffle on sir! 🤣👍♥️
I've binge watched so many videos! I so love your funkadelic skills..... Can't wait for more wierd epic projects! Thanks Nick for giving us a reason to smile during 2020.
I have wanted someone to do a video such as this for EVER. Thank you so much sir. You have made my day. God Bless and stay safe 💖💖💖...when I first got my PC I found Ebay. I did crafts and I would use wood scraps my husband had in his garage. He said I wasn’t going to make much. It was in 1997. I started making $500 a month and loved every second of it. Thank you, Thank you. I do wish I had had your videos at the time too. I probably could have made more money. I worked full time too. So the $500 was extra fun to get.
I love everything you do Nick. Really loved the 4 times you jumped/popped up into the picture...kudos for the new special effect...lol I'd like to see you do more traditional wood turning projects.
People will love any project that YOU are excited about. We can feel it when you're not that into a project. You're so much fun to watch. With nearly 900K subscribers, there's no way you'll make everyone happy, so make YOU happy.
Another Dark Day for the children of the UK. The day Nick Zammeti found out regular crayons looked awesome in his projects..... ;) those turned out amazing man.
Nick, I could watch you turn pots all day. You are both entertaining and relaxing at the same time. Not to be confused with other makers that are just boring.
Nick!!! The one with the wood and inlay bits...I LOVE IT !!!!!!!!!!!!!!! Would so very much love to own it! You do such excellent work. Keep at it and keep waffling on! Yes, I would love to see you do more wood turning, but also love it when you do the wild and crazy stuff. It doesn't have to involve the lathe, there are all sorts of things you can do with the stuff you work with...continue to be creative and make the wonders that you bring to us. Maybe in the future you could make a rectangular box of some sort with a degree of intricate detail where you don't use the lathe at all. Love your videos! Keep 'em coming! Again, The one with the wood and inlay bits...I LOVE IT !!!!!!!!!!!!!!! Would so very much love to own it!
Please, don't change on who and what you are. It's absolutely a joy to watch all the insane things you come up with coming together into items I would love to be able to own lol.
I love that you can laugh at yourself. I love your crazy, funny personality. I loved the container with the crystals and wood inlay. The pattern on the wood inlay was beautiful. It added a lot of character. Keep it up. Maybe make a chest to store things. Maybe dye left over wood shavings blue and green. Use a dark wood and then add some highlight details with a lighter wood.
I really enjoy watching your channel, you're crazy and have a fab imagination. Everything you make is cool, and I look forward to what you're going make.
I like pretty much everything you do, even when it’s not a project I’m excited for it still gives me ideas of different things I could try. Please keep doing what you’re doing.
Hi Nick. I'm definitely one of the love turning folks and especially when a bit of resin or colour are involved. Looking forward to saying hello again at Makers 2021.
I am trying to learn woodturning by watching these videos from many turners, learning styles & techniques, there are a lot of talented turners out there. I inherited my Dad's old lathe, a bit archaic but I'm just learning. Even though I started watching for information on turning I really like your channel because of it's variety & I think you are a bit kooky (I like that). I have watched all the way back about 5 years worth & I have to say your stuff in the last 2 years has greatly improved, in talent & entertainment value. I love your restoration projects, I have done woodworking for almost 50 years, including restoration, so I really enjoy your work there. You're very creative & entertaining, not as dry as other turners. Stay funky & diversive, love you, Nick!
Of course we would have liked watching you do both of them 😊 How about a pencil holder made out of resin and pencil shavings? You know, the curly bits you get from sharpening the pencil 🤣
2 for 1, happy days 🎉 I had so many great comments on this video, but I don't want to blather. I just smile and smile. Congratulations on the show!!! ♥
Bro I do like your channel more when you do the community. And it doesn’t matter what you do always entertaining and fun. Thank you and great job as always
NICK!! You know it doesn't matter what you make, I love it all. I know that doesn't help you narrow down what you will be doing more of. I like resin projects the best, wood turning would be next. Love what you do and love to hear you waffling on! Thank you for sharing!! 🥰😘❤
“Like a glove!” I love your videos, all the little references you put in give me nostalgia and remind me of my dad (he was the one that got my brother and I into Ace Ventura and Austin Powers and such) we watched those movies all the time when we were little (of course back then all the adult jokes flew over our heads, lol)
I love watching everything you do. It’s your personality that makes your channel awesome. Plus I love wood turning with wood or resins. Keep up the good work.
I would love to see a video where you explain the tools you’re using as you go. Dingbat that I am, I asked my husband if I could use his lathe ( it’s a metal lathe) and he explained that I couldn’t and bought me a small beginner lathe . ( I might have mentioned I was going to take over his garage...lmao) I would definitely like to see you explain what tools do what and how . You are much more fun than the boring videos I have been learning from so far. Where DO you get so many colored pencils? I do so love those projects and would like to try one of my own eventually. And and and...the pots came out beautiful also.
I love to watch EVERYTHING you do!!! Those little pots are so cute. You make the prettiest things. One of these days I'm going to buy one of your projects...when I hit the lottery...🤪❤
Yes, I love the funky delightfully creative items you make. Jars, pots, bowels, boxes, all with lids are among my favorites. Woodturning is great, resin is great, you are great. I like the way you restore pieces, you give them a brand new life. Your walking stick was/is beautiful. What about seasonally themed candle holders? Wall art made out of whatever you think would be fun to use. The joyous ideas in your head are there Nick, whatever you produce we will be happy to watch. Hugs from Canada.
I love the wood stuff but i'm happy no matter what you make. So I guess I come for the Nick content and stay to see something funky happen 🎺😎 The pot with the burl in the lid makes me think of the Monet painting, like the wood is a lily pad and the inlay is water
Nick, I just enjoy your content in general. Make whatever you want, do whatever you want. Make a resin and wood magic wand for all I care. Just keep it funky. Thanks for creating for us!
I really like the wood turning videos, especially when you explain what you're doing. These pots had just the right amount of funkiness. The burl/Easy Inlay one came out awesome.
Ah, finally. Was about to wear out my F5 button 😋 Yeah, I'm not the most patient person around. Love the pots especially the one with the inlay and burr lid - exactly my colours: blues, greens and purples. Crayon shavings also look funky though. Was definitely worth waiting for. Oh and I think you might need a bigger scrap wood box... 😂 Would love if you could do something in black and silver one day as those are also my favourite colours. I'm all for silver and cool colours really either bright, neon or pastel no matter. Anyways, thanks for the share and have a funky weekend.
Nick - you are so talented. Taking bits and pieces of scraps and making two such lovely little lidded pots. Thanks. PS - You are getting better looking with age, your wife is so lucky.
I like seeing you use different things that you seem to have sitting around and put them together creatively into a funky project. Using your different skills as facets in your projects make them interesting and inspires me to try new things!
I love all the silliness you have in your videos. Truly fun to watch and we get to see cool projects to boot. I really love the wood/resin wood turning. Keep on waffling!
Nick - love the channel. Got into wood turning myself after watching your earlier videos. I find the channel entertaining no matter what project you are working on. You do you, because that is what I tune in for.
I have an idea for you. Check out my Instagram for pictures of my paper marbling, not many are pictured there but I have hundreds scanned somewhere i did. Maybe I should make a book out of them. Newatom360 on Instagram
I’m looking forward to using my Makers Central tickets in 2021. The coin looks fantastic 👍👍👍 I loved the video and pots (especially the one with the burl lid). Someone else suggested a time teaching clock, I think that using all your funky shavings, pencils feathers etc would be an amazing way separate out the quarter hours and help to teach telling the time. I used to work with special needs kids, and they found it particularly difficult, so the colour contrast of the quarters would really help.
The one with the mother of pearl chips and burl piece turned out amazing! I thought the crayon one was neat, but the shimmer in the chips really is something else.
Oh wow!! Those turned out great!! You continue to amaze me with your imagination & finding new and unique projects. Loved this project! Thank you, again, for sharing your talents with us! Congratulations on getting the TV show up and going!! 💚
I'm glad you have another channel, but honestly, your videos are not the same without hearing you talk or seeing you be the funky guy you are. Alot of us, your fans, would love seeing you do just about anything. Would you so anything with crystals or geodes? I think you have the skill to pull it off. Your woodturning skills are outstanding and I think you could make something truly funkadelic!
Install Raid for Free ✅ IOS: clcr.me/Q8ocRO ✅ ANDROID: clcr.me/dkz5Q2 ✅ PC: clcr.me/x8y0SI and get a special starter pack 💥Available only for the next 30 days
I think you're the only one on all yt to make your project shine as beautiful as you do.
Those 2020 Apocalypse coins look nice.
The little pots are cool, that inlay stuff works great.
Thank you for the enjoyable videos, keep em coming.
Nick Zammeti Hi Nick. As usual your work is stunning. I don't mind what project you do as long as you do it. Your work is a pleasure to watch. Enjoy it and stay safe
Do you have any more of that dehydration crystal stuff? Maybe experiment with drying out other things besides flowers or larger plants and flowers and then putting them in resin and turning them. Or seeing if you can do a spiral turn in either wood or resin or both..... 🤷♀️🤷♀️🤷♀️
Trying to get a water effect from the resin on the inside and then drill a whole and turn a bowl so you can put a small fish tank pump into it and make a fountain. You could even go as far as to make the “stones/pebbles” from resin.
Probably silly but just an idea. Oh and put a light in it somehow 🥰
Nick, you must know that you make my world! Even in my busiest of days, I find myself starting and ending my schedule with you. I'm not even a woodturner: I'm a camera-shy bead weaver,polyclayplayer and a kansashi rubonierre. Stay who you are! Life goes in seasons and people will always find a way of finding their way back to you.😊🤗 regardless. You have a wonderful spirit and can't be beat as YTs Greatest Showman and Entertainer!
Much Love and Many Prayers that you will stay safe and be well-
~Bethany McKittrick
Muah!💋🥰
Pull the ink sponges out of markers and throw them in clear resin. Would love to see the colors seep out as it hardens!
Brilliant idea
Awesome!
That’s one hell of an idea.
That’s a great idea. I use my dead ones for making ink dye sprays with rubbing alcohol or watered down hand sanitiser in misting bottles.
I would love to see that myself
Don't try to please anyone but yourself. We're here because we like what you do. Same for any artist or maker
This ^^^
When you enjoy what you do that energy gets portrayed to the viewers so I agree do what you enjoy and we will enjoy it too.
That's a fact! How about making wooden sculptures for example?
Well said.
He Nick, did you ever think of putting coffee beans in resin and make youre self a nice “coffeepot”?
That sounds awesome
@Nick, please add Coffee Beans to resin and make a Nice Coffeepot. :)
That sounds like a cool idea
I like it !
Omg best idea ever
I'm surviving summer in the South Eastern US, there's a pandemic so I'm alone most of the time, so I could watch you sharpen a pile of pencils while you waffled on about anything but the news and feel happy just to be hanging out with you a little while. But actually, I do like the little projects as much as the big ones. I especially liked the pot with the burl inlay, really beautiful little pieces.
Thanks for the video, Nick
♥♥
@Deborah Shaw Thank you for your kind response. I didn't really think that part through and should edit it out. It's not that I don't have food or can't get food really, its that my old man still seems able to forget I have allergies and intolerances to a few common ingredients and often buys more things I can't eat than I can. Stores still close ridiculously early as if COVID is the boogyman and will get them when the sun goes down so that too of course limits access to anything including food. There are a few free giveaways in town we go to now and then because they offer more than food like alcohol, not the kind you drink, and cleaning supplies we still can't get from major department store chains here in town. Thank you again for your kindness, and know I, and many of us, are grateful for people like you who are genuinely trying to help during the pandemic.♥
@@SixRavenEight hey good luck to you! I have lots of food allergies and I know the struggle of finding food in able to eat. I wish you and your community luck and safety bud
@@thelos3999 Same to you and yours, mate.
: )
SixRaven Eight I am in the south east US as well
@@SixRavenEight I understand completely. I'm diabetic, and so is my husband, he's even on insulin, and alcohol wipes are nowhere to be found. We had to resort to special ordering them through our pharmacy. It cost a lot more, but we need them whenever we test, or when he takes his shots.
I too have allergies. I can't eat or touch anything in the melon, pumpkin, squash, cucumber family unless it's been cooked first. And I'm allergic to aloe, detergents, deodorants, aerosol propellant, wool, and most fragrances. Fortunately, none of my allergies cause anaphylaxis, an asthma attack or hives is the worst I have to contend with.
I can sympathize with you where finding allergen free products is concerned. So many products have aloe, detergents, deodorants, and fragrances in them that I have to be very careful when I'm out. You didn't say what you are allergic to, or how bad those allergies are, but I can imagine that the Idea of eating out, or even ordering in, is totally off the table for you.
Maybe making a list of things you can eat, and that you like, will help your dad remember your special dietary needs when he goes shopping, that's what I do whenever my husband goes to the store for cleaning products and such.
Nick makes my day. He’s fun to watch and listen to.
Mine too. He's always so cheerful.
Yes, he always brings a smile to my face!
Right!!! Same, I can't believe there are people who don't want him to waffle... that's like the best part. Imagine if you will him doing audio books! 😍🥰😍
He is definitely making my safer at home time better. Watch a few projects a day. Hope everyone is staying safe and healthy out there.
Same my daudhter and i watch him all the time
Love the burl lid! Any plans to do a big crayon shavings project?! What about a "school supply" clock?! You could mix colored pencils and crayon bits. All the same thanks for all the smile. We love watching you across the pond.
Another fun idea would be to turn a "cup of tea"!
The burl like reminds me of a crescent moon face.
Nick, don't know what I'd do without you and Charlie. You're a brilliant artist and craftsman as well as a fabulous standup comic. Appreciate the time and effort that you put into each video. Thanks a million, and Blessings to you and Charlie!
I love your talking bits almost as much as watching the wood on the lathe. You are very entertaining. I'd have to say my favorite videos are your experiments when you have no clue how they will turn out. Keep up the good work Nick, I'm always looking forward to the videos.
I dont know what i like more, the amazing artwork or the dope music . . Both? . . . Both!!
I like everything you do. You could show both pots, we don't mind. Keep calm and waffle on.
Nick, you gotta be the king of "dad jokes". I bet your kids roll their eyes at you dad jokes, which makes dad jokes very worthwhile. Waffle on sir! 🤣👍♥️
I've binge watched so many videos! I so love your funkadelic skills..... Can't wait for more wierd epic projects! Thanks Nick for giving us a reason to smile during 2020.
Anyone else wanted to jump into his workshop to line up the grain of the lids with the bottom
Absolutely! OCD in me. Beautiful boxes though
Yes! Yes, yes, yes.
I thought that was just me! Phew.
HaleTheBerzerker omg yes!!!
Hahaha my thoughts exactly lol
I have wanted someone to do a video such as this for EVER. Thank you so much sir. You have made my day. God Bless and stay safe 💖💖💖...when I first got my PC I found Ebay. I did crafts and I would use wood scraps my husband had in his garage. He said I wasn’t going to make much. It was in 1997. I started making $500 a month and loved every second of it. Thank you, Thank you. I do wish I had had your videos at the time too. I probably could have made more money. I worked full time too. So the $500 was extra fun to get.
I love everything you do Nick. Really loved the 4 times you jumped/popped up into the picture...kudos for the new special effect...lol
I'd like to see you do more traditional wood turning projects.
Looks awesome. I'm the words of Bobby Duke, "I want that!"
I want everything Nick makes out of wewd. LOL
I'd love to see a Nick/Bobby Duke collaboration (if the pandemic ever passes)....
i love watching wood turning. But i also like some of the off the wall ideas as well!
The glittery inlay and burl pot is my favourite thing I've seen you make so far. I love blues and greens.
I think these are my favourite projects, I love the wood + resin projects. But I like the funkier stuff too but these are my favourite.
Wood turning is what brought me to the channel so I don’t want to see them ever go but I’ve thoroughly enjoyed the other things you’ve done as well
What a great way to start off a day with a Nick Video!!! I really love this project, totally want the one with the burr inlay!!! Just lovely! xx
😍 x
People will love any project that YOU are excited about. We can feel it when you're not that into a project. You're so much fun to watch. With nearly 900K subscribers, there's no way you'll make everyone happy, so make YOU happy.
Another Dark Day for the children of the UK. The day Nick Zammeti found out regular crayons looked awesome in his projects..... ;) those turned out amazing man.
Nick, I could watch you turn pots all day. You are both entertaining and relaxing at the same time. Not to be confused with other makers that are just boring.
Nick!!!
The one with the wood and inlay bits...I LOVE IT !!!!!!!!!!!!!!! Would so very much love to own it! You do such excellent work. Keep at it and keep waffling on!
Yes, I would love to see you do more wood turning, but also love it when you do the wild and crazy stuff. It doesn't have to involve the lathe, there are all sorts of things you can do with the stuff you work with...continue to be creative and make the wonders that you bring to us. Maybe in the future you could make a rectangular box of some sort with a degree of intricate detail where you don't use the lathe at all. Love your videos! Keep 'em coming!
Again, The one with the wood and inlay bits...I LOVE IT !!!!!!!!!!!!!!! Would so very much love to own it!
Please, don't change on who and what you are. It's absolutely a joy to watch all the insane things you come up with coming together into items I would love to be able to own lol.
I love that you can laugh at yourself. I love your crazy, funny personality. I loved the container with the crystals and wood inlay. The pattern on the wood inlay was beautiful. It added a lot of character. Keep it up. Maybe make a chest to store things. Maybe dye left over wood shavings blue and green. Use a dark wood and then add some highlight details with a lighter wood.
I love all the things you do, the woodturning, the resin, restorations. All of it. The variety is nice, and I just love seeing what you come up with.
I really enjoy watching your channel, you're crazy and have a fab imagination. Everything you make is cool, and I look forward to what you're going make.
I like pretty much everything you do, even when it’s not a project I’m excited for it still gives me ideas of different things I could try. Please keep doing what you’re doing.
Hi Nick. I'm definitely one of the love turning folks and especially when a bit of resin or colour are involved. Looking forward to saying hello again at Makers 2021.
I am trying to learn woodturning by watching these videos from many turners, learning styles & techniques, there are a lot of talented turners out there. I inherited my Dad's old lathe, a bit archaic but I'm just learning. Even though I started watching for information on turning I really like your channel because of it's variety & I think you are a bit kooky (I like that). I have watched all the way back about 5 years worth & I have to say your stuff in the last 2 years has greatly improved, in talent & entertainment value. I love your restoration projects, I have done woodworking for almost 50 years, including restoration, so I really enjoy your work there. You're very creative & entertaining, not as dry as other turners. Stay funky & diversive, love you, Nick!
Nicks my favorite TH-camr!! He makes me laugh everyday :)
Me too!!! ❤
Same, my kids and I love watching Nick.🥰
He's been our ray of sunshine in these dark times ( Damn coronavirus lockdowns 😔)
Don’t change what you do, it’s your channel. The majority of us love you & what you do, whatever you do! Waffle on Nick x
How bout this for an idea for the future: wicker/bent wood and cane furniture with resin and brass inlays and wood turned legs with fancy finials?
The one with the wood burl and opal bits is to die for. SO BEAUTIFUL.
Of course we would have liked watching you do both of them 😊
How about a pencil holder made out of resin and pencil shavings? You know, the curly bits you get from sharpening the pencil 🤣
AWWSOME idea!!!!❤
2 for 1, happy days 🎉
I had so many great comments on this video, but I don't want to blather. I just smile and smile. Congratulations on the show!!! ♥
Idea of what to make: A bowl for shelling pecans that has places to stand the picker tools.
Made out of pecan shells!!
U r amazing ..... just amazing nick🙇🙇
I prefer you doing a variety of things. Maybe do some more smelting or otherwise metal melting and combine it with wood or resin.
The glossy finish on those pots is astonishing. Lovely.
Bro I do like your channel more when you do the community. And it doesn’t matter what you do always entertaining and fun. Thank you and great job as always
NICK!! You know it doesn't matter what you make, I love it all. I know that doesn't help you narrow down what you will be doing more of. I like resin projects the best, wood turning would be next. Love what you do and love to hear you waffling on! Thank you for sharing!! 🥰😘❤
For that one resin project that was a disaster, you could make pot lid handles from it. That way it still gets made into something.
Pen blanks are another possible idea
“Like a glove!” I love your videos, all the little references you put in give me nostalgia and remind me of my dad (he was the one that got my brother and I into Ace Ventura and Austin Powers and such) we watched those movies all the time when we were little (of course back then all the adult jokes flew over our heads, lol)
0:25 Damn Nick. Lookin trim, bud.
😜👍🏽
I love watching everything you do. It’s your personality that makes your channel awesome. Plus I love wood turning with wood or resins. Keep up the good work.
I would love to see a video where you explain the tools you’re using as you go. Dingbat that I am, I asked my husband if I could use his lathe ( it’s a metal lathe) and he explained that I couldn’t and bought me a small beginner lathe . ( I might have mentioned I was going to take over his garage...lmao) I would definitely like to see you explain what tools do what and how . You are much more fun than the boring videos I have been learning from so far.
Where DO you get so many colored pencils? I do so love those projects and would like to try one of my own eventually.
And and and...the pots came out beautiful also.
Hey, my children and I watch your videos together (we love your channel). My daughter would like to see you make a bow and arrow 🏹 .
I love to watch EVERYTHING you do!!! Those little pots are so cute. You make the prettiest things. One of these days I'm going to buy one of your projects...when I hit the lottery...🤪❤
I personally liked what brought me to the channel so long ago. I liked the turning, the pencil pots, the platters
Me at 6 mins in:
"I wonder if that cut is from his woodturnery thingy 🤣😂!!"
Yes, I love the funky delightfully creative items you make. Jars, pots, bowels, boxes, all with lids are among my favorites. Woodturning is great, resin is great, you are great. I like the way you restore pieces, you give them a brand new life. Your walking stick was/is beautiful. What about seasonally themed candle holders? Wall art made out of whatever you think would be fun to use. The joyous ideas in your head are there Nick, whatever you produce we will be happy to watch. Hugs from Canada.
Oh my gosh. Those boxes are, by far, my favorite items that you have made so far.
I like the beard now. So nice. Not flirtin jus sayin. 👍🏽
😜😍😍
I love the wood stuff but i'm happy no matter what you make. So I guess I come for the Nick content and stay to see something funky happen 🎺😎
The pot with the burl in the lid makes me think of the Monet painting, like the wood is a lily pad and the inlay is water
Nick i was wondering if a jar can be made from Apple Watch straps in resin. 🤔🤔
Anything is possible
VIQ ROY yessssss !!!!!
@@ViQRoy89 YES I WILL LOVE TO SEE IT
... why do you torture him like this lol
Some Random Dude XD
Nick, I just enjoy your content in general. Make whatever you want, do whatever you want. Make a resin and wood magic wand for all I care. Just keep it funky. Thanks for creating for us!
channeling snl of years past."You put your weed in there."
I really like the wood turning videos, especially when you explain what you're doing. These pots had just the right amount of funkiness. The burl/Easy Inlay one came out awesome.
Ah, finally. Was about to wear out my F5 button 😋 Yeah, I'm not the most patient person around. Love the pots especially the one with the inlay and burr lid - exactly my colours: blues, greens and purples. Crayon shavings also look funky though. Was definitely worth waiting for. Oh and I think you might need a bigger scrap wood box... 😂 Would love if you could do something in black and silver one day as those are also my favourite colours. I'm all for silver and cool colours really either bright, neon or pastel no matter. Anyways, thanks for the share and have a funky weekend.
Nick - you are so talented. Taking bits and pieces of scraps and making two such lovely little lidded pots. Thanks. PS - You are getting better looking with age, your wife is so lucky.
Not gonna lie I thought at first they were coffee mugs and I was excited. They are amazing! And I so wish they were coffee mugs!!
You're videos are so uplifting and positive and give me a boost on the days that I struggle with sadness.
12:27 "Now that should look pretty... Weird!"
Me: But we like weird, don't we? 😆
Edit: Nick, you forgot to put your address in the details.
I like seeing you use different things that you seem to have sitting around and put them together creatively into a funky project. Using your different skills as facets in your projects make them interesting and inspires me to try new things!
Oh my i m first !!!!!!!
Lovely pieces, Nick! Casting the coffee beans worked like a dream. Thank you for your vote of support the other day.
Hello Nick
tell me do you know something about Heath Knuckels?
He no longer uploads anything.
hes cool we keep in touch, he will be back soon 😜
Yeeeeeees!!!! Thank you!👍😘
The Boxes are so beautyfull. Love the one with the Easy Inlay Things.
I would like to see you test your skills with some wood burning. I bet you could make something funkadelic!
THE POT WITH THE INLAY IS BEAUTIFUL
I love all the silliness you have in your videos. Truly fun to watch and we get to see cool projects to boot.
I really love the wood/resin wood turning. Keep on waffling!
Nick - love the channel. Got into wood turning myself after watching your earlier videos. I find the channel entertaining no matter what project you are working on. You do you, because that is what I tune in for.
Back to doing what you do best, woodworking and wafflein’ ! Loved the scrap bin projects, well done!! Thanks Nick, and keep up the great work!
As usual a lovely project, I love watching you Nick,something safe and normal in a very difficult time. Thank You. X
I love seeing the wood turning! Watching you is the highlight of my day! Those bowls are so sweet and the clicks are delicious!
I love the wood turnings as I like the grains off the woods.
I do so enjoy all of your funky, crazy, wild kind of things. The wood turning is great. Every time I see your videos I get a laugh.
Nick and his lathe, Just what we all need to make us smile. 😀
I enjoy watching what ever you do would like to see a set of wood coasters with different inlays. Hope to be at makers central next year
So nice to see some new classic Nick projects! Really like these, especially the odd shape of the bottom of the burl one
I love all of your projects, the wood turning, the restorations, the resin projects. I just love watching your videos
I could watch you do anything and everything. I am a huge fan. With a lot of love for Nick Zammeti.
I have an idea for you. Check out my Instagram for pictures of my paper marbling, not many are pictured there but I have hundreds scanned somewhere i did. Maybe I should make a book out of them. Newatom360 on Instagram
I would have thought the crayon shavings would have melted. Very cool. I like wood turning and all the other projects you do.
I’m looking forward to using my Makers Central tickets in 2021. The coin looks fantastic 👍👍👍
I loved the video and pots (especially the one with the burl lid). Someone else suggested a time teaching clock, I think that using all your funky shavings, pencils feathers etc would be an amazing way separate out the quarter hours and help to teach telling the time. I used to work with special needs kids, and they found it particularly difficult, so the colour contrast of the quarters would really help.
Love the pots! The one with wood inlaid is gorgeous. And you, sir, are a hoot!
I love to see your wood turning. It is always a little quirky and different and beautiful.
Always fun to watch you! I think the world needs a Nick Zammeti/Bobby Duke collaboration! 😊👍
Love your craziness. Love seeing your creative side putting all kinds of different items in the resin. You are awesome.
Amazing what you can do with scrap wood! My favorite day of the week is the day your videos come out! Thanks Nick
I loved the feather bowl best! I was really surprised how the feathers reacted to the resin. Would like to see more larger items like the bowl!
Invenzioni artistiche di alto livello! Bravissimo tutto meraviglioso!
That closing click is such a satisfying sound! Beautiful work Nick!!
The one with the mother of pearl chips and burl piece turned out amazing! I thought the crayon one was neat, but the shimmer in the chips really is something else.
Oh wow!! Those turned out great!! You continue to amaze me with your imagination & finding new and unique projects. Loved this project! Thank you, again, for sharing your talents with us! Congratulations on getting the TV show up and going!! 💚
The pot with the inlay is amazing. Would love to see you play with glow in the dark powders.
I'm glad you have another channel, but honestly, your videos are not the same without hearing you talk or seeing you be the funky guy you are. Alot of us, your fans, would love seeing you do just about anything. Would you so anything with crystals or geodes? I think you have the skill to pull it off. Your woodturning skills are outstanding and I think you could make something truly funkadelic!