Most Satisfying a Genius Man Can Do it Easily How to Rebuild an Excavator Stick Housing
ฝัง
- เผยแพร่เมื่อ 8 ต.ค. 2023
- Most Satisfying a Genius Man Can Do it Easily How to Rebuild an Excavator Stick Housing
#satisfying
#geniusman
#excavator
#housing
#stick
#rebuild - ยานยนต์และพาหนะ
This is a professional at work.
When you see that we can operate a lathe here in our Sunday best and what they do there with very old lathes, I take my hat off to you.
I have a lot of respect for these types of professionals because that's what they are, really old professionals.
Putting a lathe in a small space and doing this kind of work is craftsmanship at its best. Much respect for this man.
True Craftsman working with what he has.
Me gusta mucho mirar como trabajan estos maestros saludos bendiciones para todos ustedes y sus familias con salud espiritual física y económica así sea saludos abrazos
Phenomenal work! all in a backyard metal shop, but obviously aware of the importance of accurate measurements (without any digital tools), as the frequent use of calibers shows. Well Done sir
thanks for appreciating
they are caliPers.
Mesmo com falta de ferramentas sofisticadas, conseguiu executar um belo trabalho, com tanta humildade só poderia ser agraciados por Deus, sejam felizes ☘️🙏
Three points. No music. Good. Sped up content that also speeds up the audio. Not good. No narration or sub titles. Not good
This man has great skill
Look at the machine and material he has to work with. WOW.😊
Very good video. Very beautiful machine. A thank you to you. It's great that everything is fixed. Great channel I like it very much.very good mechanic, Thank you very much for that💐🤘🌆🎉❤
Thank you too!
Nothing better than rusted salvaged ship steel lol
Parabéns para esta equipe , mesmo sem recursos o trabalho foi feito.
Brilliant job .
Have to say for some people criticising on this repair. You got everything in your country. Very fortunate. These boys are doing good work with what they got. There's a lot of people doing the same to keep shit running all over the world.😁❤
thanks alot for support
Excellent travail 👍👍👍
ฝีมือการซ่อม เยี่ยมมากครับ
Looks like a genius cobbled it once before
Belo trabalho, saudações, Brasil
за приспособу для резки отверстий 👍
Excelente trabalho.
thanks
U like it..
Super jest to skrzdło żurawia odrestaurowane pozdrawiam serdecznie 👍👍👍👍
thanks
одно радует, что сварщик не в тапочках.
Привет классная работа 👍👍👍👍
Selalu ada cara untuk mengembalikan ke kondisi semula
Keren banget
Keren banget mesinnya 5:02
In America, we could learn alot from your resourcefulness & team work
yeah then viral my videos in america😝
VERY IMPRESSIVE 👍
You want it bad. You'll get it bad.
The worse you want it, the worse you'll get it.
A vederlo fare sembra tutto facile. Invece è difficilissimo. Siete dei maestri. Complimenti. Da noi in Italia scavavi una buca in giardino, chiamavi un "sacerdote", facevi fare il rito funebre e seppellivi il pezzo defunto non riparabile. Poi compravi una macchina operatrice completa nuova. Amen
thats the work i do ... you are right it was not an easy job but i have done with my skills and aim to the work hard
You didn’t use the zig zag joint to join the repair part to the old arm. Mistake.
Когда на первых кадрах увидел пижаму, понял что видео будет интересным))
Brilliant work!!!
Thanks a lot!
Great work lads , next time put a rag in the Boss holes to stop weld spatter getting in . good repair .
Good tip!
Amazing!!!
The final installation of the base plate should have longer, where the new plate goes beyond the repair basically the load on the stick with the bucket will be right where the base plate joins and will be its weakest point. Has it failed since?
Great job. Thanks
thanks
NICE JOB
That boom was pushed beyond its SWL and that figure is even less now. Same again next week lads?.
Who have to do your best with what you have to work with, not everyone has the money or resources.
Esse pessoal trabalha bem, poucos recursos, mas são mestres no ofício. Parabéns
thanks for appreciating
Amazing work! :o)
You guys are AMAZING...nice work
thanks
Just great work
so called nice work
big like
Yo hubiera cambiado solo la parte final, pero buen trabajo.
ho would u weld that part with damage an too many welded stick
Weltmeister im Schweissen !!!
good job
Good job
Like goodjob
сначала ушатать как бог черепаху а затем героически починить) умеем, можем, практикуем.)
we can do it ...
احسنتم ممتاز
Los trabajadores parecen salidos de la era primitiva es un pena porqué trabajan bien
we live in 2023 just for lake of resources we do this type of work ... in 1st world countries this type of repairs may not occur
they must have a shortage of Portland cement in India as well as work boots
👏👏👏👏👏👏👏👏👏👏
Nice! Great crafts work. Open shoes and a ruler. Stay safe.
would you like my work
Open shoes and a ruler. And?
Brilliant work! Would love to be able to weld like that.👍☘️
Ha yahshi jamoa
máy này chính hãng không shop
juxt imagine if the workshop may also at the europion standerd
Wow that pin is wore out and the pivot point is wow..Looks like the has been bad for a long time.. Sad operator just used it so long that it broke..Operator should be fired for just wreaking expensive equipment.. But lucky you have a great machinist here.. Very good a restoration. As this piece of beyond repair.. nive to see this man work.. great at what he does too. Nice video..
Еще походит
Электроды наверное коробками затариваются 😂
no no not at all electrodes have been used at it for welding purposes
I give it 6 weeks before the welds break, 😊
i have repaired it before 6 months and it is in working since then
👍
OlhNa errado vc esqueceu faltando ferro dentro soldado ué kkk
the proper work has done here some clips of work are missing in video due to editing..
it works properly and perfectly in running machine if possible i will snd u a video of it in working condition
Good job.
And of course this repair comes with backlight-warranty for only a handfull rupees more.
👏 for you this is not an actual repir may be in others openion but this is done for the only low coat budjet and i charged only 120$ for it... thats it
That's a good pin I need the company name the pin did not fail the boss did lol
Что за электроды используете?
e6013 electrods
No Paint?
thats the painter's job .
This is all old ship steel and junk foundry steel. It hasn’t the strength of new steel, using junk to fix junk.
Зато работает это. Можно долго говорить что так нельзя, что это не хорошо. Будто в других странах такими вещами не занимаются. В России давно в металл сдали бы эту технику 😂
No bushings? Do they fit?
we have placed the bushing in it and also done the paint but could not capture the video...
Can you imagine someone operating that machine to wind up looking like that? Shame, Shame!!
well they got thier monies worth out of that pin didnt they
thats right
What gets me is who would wear a joint so bad that it tore out like it did..no grease,nothing
No ..the pin got their money's worth
😊😊😊😊
@interestingmechanics00 😮😊😊😊😊
สนพอใจ
,,,,,,,
อะอะ
You can see these people wear sandals to work for this job, very unsafe, no sense for safety at all
Wow the one who don that has no bussines to be near machinery...
it may possible in your opinion
Genius at work there ain't none here remove and replace how bout that???
how u say it that was not an easy job
this is the team work may b in your opinion i m not a genius...
Paint it yellow….
yeah thats was the painter's job so i don't
As a retired welder and fabricator, this is NOT how to repair a worn pin and a torn bushing. By cutting off the end, you have created a weak area in the boom
that will break. This type of repair comes from the lack of training and common sense. It's pitiful.
u may a retired welder but i m in service we know our job very well and do guranted work for client we created inside supports for weak area just not shown in the videos ... in our country we have good worth in our field
if u don't appreciate plz don't criticise 🙏🏻🙏🏻🙏🏻
@@interestingmechanics00
It still is a weak part no matter how you want to talk your way around it. Steel for the construction industry, especially batched for its application. The steel you used came from a scrapped tanker from India. You have no idea where it came from or how it is alloyed. We have a saying in the USA, 'you can lead a horse to water but you can't make him drink'.
You are a perfect example.
Totally agree with you. It will break again. Asked my uncle who is a professional in this field and he also said it will not hold.
These guys are retrained donkey surgeons.
First thought they had, was to give this boom the coup de grace, but it failed.
look at all the experts
Pisbakken staal!
jxt shut up
3:16 this stick was already repaired like this before?? They don't have grease there??
yeah it was repaired already but was too much bad work done there
You never cut it straight , it should of been cut of like a Z so there is more weld and less chance of it cracking in the weld with all the force, I thought you knew better than that,
you are right it will b more reliable if i cut it in z shape
but i have welded supports in it thats not showen in the video clips
use of wrong tools
what kind of tools should i use tell me
"Most Satisfying a Genius Man Can Do it Easily" is a dumb name.
Says telephone bill?
suggest a title for this video
@@interestingmechanics00 boss chipmunks save the day
Damn chipmunks invaded this otherwise interesting video! Thumbs down and I'm gone...
Typical American’s 🤦♂️ only can hide behind the computer or phone and comment negative comments 😢
so control your chipmonks
Отлично
A little grease goes along way,
Probably the owner might be saying it is the mechanic fault and the mechanic might be saying it is something else !!!!!!!🤫but the truck knows the true !!!!!!🔴🫢🤫
I think it is a regular customer!!!!! 16:36 been here before and before!!!!and probably will comeback !!!!🔴🫢🤫 16:36 !!!hope not!!