Great video!! Thank you! It worked! But took 6 times on / off on my 2012 Rogue. And the last 2 times the light blinked more slowly. Then on the 6th time no blinking at all
That I am not sure about but I'll definitely look Into it soon as a have a new car coming to the channel next week and one of the first mods will be a steering wheel
Hey man, I tried this on my 370z and here’s what happened. So I plugged in the emulator to see if it would work without a airbag reset procedure and it didn’t work. The passenger airbag light continued to flash. So I preformed the passenger airbag reset procedure and now the light is flashing at a different pace and different speed. It’s almost like the emulator is interacting with the car but not actually keeping the light off. Maybe I should try disconnecting my battery and checking the connection?
Yeah keep messing with it. Make sure you stick to the steps and be sure to look up 370z procedures to make sure it's the same. Could be slightly different
Was the website also a little suspicious? Because i ordered one a week ago for my g37, they haven’t supplied a tracking number. Getting a little worried
What shall be the problem if am not getting Airbag and VDC lights on dashboard, when I switch on a car they normally appears with other dash signs and disappears as it should, but now when I switch on the car, all other dash signs appears and disappears except for vdc and Airbag lights, is it possible that their bulbs might have blown out?
The relearn was pretty much the toughest part and it wasn't consistent with the way I found online so I hope this helps!
So I need 2 of those seat sensors, 1 for each seat? Or just 1 sensor works for both
@@Blkrov I am curious as well. Hope to see a reply soon.
Great video!! Thank you! It worked! But took 6 times on / off on my 2012 Rogue. And the last 2 times the light blinked more slowly. Then on the 6th time no blinking at all
Thank you man! I have a g35 and i just emailed them to make sure this one will work for it. I've been running with this light for like 3 months!
I had mine on for a long time too haha let me know what they say about the G35. I det it will work but would love conformation!
Thank you so Much!! Worked on my 2013 G37, I erased my old codes & good as New!! Great Video!!
Wooo!!! Love to hear it!
so if I put this in the passanger seat, will the seat belt light stay on all the time?
hey man i know this is 4 years late but do you need one of those for each seat or only one for the passenger seat?
I have the same question
Great find for the 2011 Nissan rogue as well .where do you connect?
Can you show how to put the device in? looks like you're just doing the airbag light reset procedure.
what about if you have a aftermarket steering wheel ? do you still buy resistors for the steering wheel airbags ?
That I am not sure about but I'll definitely look Into it soon as a have a new car coming to the channel next week and one of the first mods will be a steering wheel
Where did you plug it into? And do you leave it plugged, I’m assuming?
There will be an open plug remaining when you changes seats. You just need the 1.
I added resistors and I get a flashing light I am about to take the cluster apart and remove the light 😂
I just emailed them but for the g35 and 350z it only says 06-08 for the years. Hopefully its all the same for other years
Keep us posted!
good video!! I needed this for when I put some on my 370z!
Glad I could help!
Hey man, I tried this on my 370z and here’s what happened. So I plugged in the emulator to see if it would work without a airbag reset procedure and it didn’t work. The passenger airbag light continued to flash. So I preformed the passenger airbag reset procedure and now the light is flashing at a different pace and different speed. It’s almost like the emulator is interacting with the car but not actually keeping the light off. Maybe I should try disconnecting my battery and checking the connection?
Yeah keep messing with it. Make sure you stick to the steps and be sure to look up 370z procedures to make sure it's the same. Could be slightly different
How long did it take you to get your package? I just order mine today for my 2006 Infiniti G35 Coupe
Not long maybe 4-5days
I finally installed the “Airbag 360” but my light still blinking. Did you also installed resisters on the yellow airbag connectors?
@@juanherrera155 I didn't have to do anything g extra at all. Just plug it in
Did a green light turn on the box?
I don't recall. Might be seeing the car in storage in a few days so I'll look for you
Was the website also a little suspicious? Because i ordered one a week ago for my g37, they haven’t supplied a tracking number. Getting a little worried
Definitely didn't have a pretty website but mine came no problen
Black Pearl Media...now the computer thinks someone is sitting in the passanger seat, so doesn't the seat belt light stay on and beep?
Nope
@@blackpearlmedia7797 so it’s basically tricking the computer that there’s a passenger and the airbags will deploy during a collision?
@@z34_j68 correct!
Where did u buy this from
Does this also work for rear curtain airbag sensor?
Not sure. You will have to contact them
Please show how you installed it.
Just plug it in! You will see the plug under the seat
What shall be the problem if am not getting Airbag and VDC lights on dashboard, when I switch on a car they normally appears with other dash signs and disappears as it should, but now when I switch on the car, all other dash signs appears and disappears except for vdc and Airbag lights, is it possible that their bulbs might have blown out?
Hmm I'm not sure but that dosnt sound normal. Try clearing the airbag light and see if the VDC light goes off?
IT WORKSSSSSSSS LFGGGGGGGGGGG
🙌🙌🙌
Does this work for a 2009 g37
Should!
Work for 350z 2004?
Did you find out?