You can use laser cutting, laser cleaning and, laser welding. Some advantages of laser technology are environment friendly, low cost, more efficient, easy to operate.
Coming from the states I appreciate everything you said in the first 5 mins. Most people ignore the long term affects of welding. With that said I think you awesome in your craft. Your fast, precise, and a great welder. Much respect
Due to the fall in the stock market, I don't think it's advisable holding, it would be more beneficial and yield more profit if you actually trade on crypto currency I've been trading since the dip, and I've made so much profit trading
@@shorttermrentals7959 that's why you need the help of a professional who trade and understand the market more to earn good income, these professionals understand the market like it's there own farm and make s maximum profit for investors.
Really appreciate the words about safety and avoiding fumes. Id love to get a setup like you have for work but we'll see if they're keen on paying for the 3m papr system, or at the very least splitting the cost. It's a little over 2k here atm. I like using the air filter respirator most of the time but there's times where it's too hot and you just skip it.
If you are looking for high-quality welding machines, please contact me. We are a manufacturer with a history of 32 years, focusing on the production and research and development of manual arc welding machines.
Thanks bro.. Safety is a major factor.. I suffered hospitalisation and numerous doctor visits and lost shifts because of chronic sinusitis and terrible sporadic headaches because of exposure to fumes from using 2.4mm Open Arc Flux Core and Low Hydrogen electrodes (MMA) Welding for nearly 6 hours a shift. Only to find out from an excellent ENT Specialist that I was suffering because of over exposure
Safety is so important. To often this is skipped over and the end result is many years down the line when all of a sudden your lungs, etc., are shot and you are saying if I only knew. You can not depend on your employer to keep you safe, it is the workers responsibility for his own safety and no amount of money compensates for loss of good health. Allways enjoy your videos, always go away learning something knew and never fell that I could have spent my viewing time in a better manner. Clarence keep up the good work.
Excellent video. Keep up the good work. You are an excellent welder sir. I've been in pipe fabrication for 32 years. I've learned a few tricks from you. Thank you for the excellent videos sir.
been a welder myself, now im a QC-Inspector. Have to say you did a good job. Welding with one hand and use the other one to turn the pipes yourself is not easy. Keep doing what you doing.
If you are looking for high-quality welding machines, please contact me. We are a manufacturer with a history of 32 years, focusing on the production and research and development of manual arc welding machines.
Sadly here in South Africa with the economy kinda dwindling. Many workshops quite slow with an infrequent workflow. So it's really something to be in a spot where production is quite steady. But really good content man.. Keep them coming 👍
Mate you're a gun, I love these videos! Iam just starting my business after 12 years on the tools, watching how efficient you work is going to help me big time if I can sercure some pipe work. I didn't realise i've been putting on slip on flanges like a d!ck head for years hahaha.
Its true for some occasions, if i welded the flanges the job basically becomes a weld neck job and my Fabrication will need to be perfect with no room for error with a 3mm Tolerance, atleast if my fit up isnt perfect i can catch it on the flanges
Great video. Im wondering how you like up a 45°elbow when the pipe is a couple of mm smaller as it don't line up in angle iron?? Any tips are great im working at a welder fabricators and get some elbows to weld to pipe. Keep up the good work. Thankyou.
pay by the inch is sweet sometimes. Doesn't happen too often here in canada, but the last one i did was $20/inch. so one 10" butt weld would make me $200. I was doing 100" of weld a day and invoicing $2000/day... they thought they'd save money this route, but it kind of bit them in the ass. lol
Just an enthusiastic home fabricator here, but I bought a ventilated helmet a few months back prompted by your example. Safer and a lot more comfortable. Cheers for the great content.
Hi Calvin, Want to pass along a great feature that stops the warping experienced in pipe welding (works on A-36 plate & structural members too). I was shown by a very savvy weldor/fitter. He always had a bucket of water & a rag nearby. Apply the wet rag in the right places...this retards the warping. This works on A-105 & s/s pipe too. Hope this helps, Pete 🙂
I just started welding as a hobby (in the US) and I immediately got a (used) PAPR. My cousin has respiratory problems from welding and I want to avoid that
Like the work your doing and the safety rules you follow, that being said, I'm not a professional weld but a student in the AWS online classes have passed the ( welding fundamentals I and going on to welding fundamentals II ). Can say that Calvin knows what he's doing and how to do it safely. Thank you Calvin
I Never use a respirator when MIG welding regular carbon steel. I'm sure it's bad for me, but I would hate to be wearing that rig all day. If I'm doing something like aluminum I'll wear a filter. Just my preference. Yes, I'm American xD
Everything you do i f****** proper as hell my dude.just ran across ur channel. id pay for this rather than netflix all day. Good shit man. I like to watch just to learn some new techniques. Thank you very much.
Thats so odd, my price is calculated per inch only. We get about £3 per inch and straights and little spools are the best. If i done 100 inches alone id make £300-£350, however its divided by every fitter and welder. Luckily there arent too many in my shop and we all work at pretty much the same speeds. So a good day could be like £400 each but some can be really bad.
Welding in America it is really crazy how no one wears a respirator but almost every euro video I see they have them on. Good on you, I should get one too
Great videos! Great know how! Your skills and experience are on a well developed level. It´s such a pleasure to watch you handle your work. And i appreciate your words about the work safety..respiratory.. -This topic is coming way too short out on the field as well as on most youtube channels. I am happy that i ran into your channel. Keep it up bro! All thumbs up! Liked and subscribed. Greetings from Germany
I also agree on the importance of fume extraction and protecting your lungs, even when grinding/sanding. Do you have any videos on what particular brand/setup you recommend?
Yeah, over here in the states, I'm an ironworker. We weld with stick and innershield wire. The wire is an irritant and the second you breath any spec of dust from it, it will make you cough. Our safety and procedure for it is that because we're outside, that's good enough to protect you from getting respiratory problems 😂
I work in this field in Northern Cal, you’re teaching me a lot and I agree on respiration and health. We work by the hour here, I’m interested to know if you belong to a Pipefitter/welder trade Union or guild.
Funny stuff i do the same thing to gas nozzles with a center punch. I also use abicor ceramic spray on my contact tips and gas nozzle makes things last a lot longer.
All that time apprentice then getting a job you are woth every penny,im a lorry driver in uk and the work now is pick ya own £20 an hour is easy at the moment, you stay safe Calvin,O by the way your one good welder very neat job,keep up with the tig i like to see them vids im getting better but at 65 im too late to change now.
Appreciate Your safety. Years ago after welding copper and it made me sick the solution was to drink milk. They have come a long way in safety equipment.
Barley starting out mig pipe practice at technical college and they past couple weeks I’ve felt my breathing get a little worse, might have to take you up on the respirator advice
@@ARCONEWELDING The best advise I can give you stay away from shops. I always worked outside in construction, refinery ,etc. I am 81 now, worked in Canada ,but mostly in and around Toronto and travel jobs . Nice welds!
Good work my man I am a welder myself so I understand first hand everything your talking about and I think it needs to be talked about more because not enough is being done to protect us love the video as always great content I hope what you call making money is enough because you definitely have a talent and if your looking in the right places there is money to be made all the best 👍
your comments about just holding the fitting and tacking it is so true. ive seen way to many guys screwing around with jigs trying to get the fit right. 45 min later they get it, when it coulda been done in 5 min.
I always screw a plug into any socket or stabbing i welded on, it comes from when i was an apprentice, i was asked to weld a socket on a live pipe late on a Friday afternoon so maintenance could run an extension off it on Saturday morning, i rushed it so i could shoot off to go out for a good time Friday night, i came in Monday morning to a real ear bashing, the socket had deformed in the heat and they couldn't screw the pipe in to it, not only does the plug absorb some of the heat you know it's good to go when you screw it out.
Ah the classic oxy cutting torch/ hammer multi tool. We've all been there. What root gap do you use, im assuming that's all sched 40 in the video. Nice work
@@ARCONEWELDING ha ha ha. Nice. It's been nearly 7 years since I've done any mig pipe work, been doing stainless tig for the past 18 months. A nice change
I think it was just an exampleof how his price list works as his employer didn't want him to talk about the actual prices he makes, no way would that spool be 16.50, you'd make that in one 4inch butt.
@@bobskobob276 Its just each type of weld is worth a different amount. So a 2 inch socket he might get paid £8. A 4 inch butt weld might be £20, a 4inch flange £15 an 8 inch butt £35 etc. Butts usually cost more than flanges the bigger the pipe the more money. His employer will pay him per weld he does and each type of weld will have its price eg. Above. You add all the monetary value of the welds which you completed in that day and there is your day's pay.
arc-one-army-apparel.creator-spring.com/?
You can use laser cutting, laser cleaning and, laser welding. Some advantages of laser technology are environment friendly, low cost, more efficient, easy to operate.
Top work, good explanation, great fitwork. My father sayed to me its great pleasure to see a good craftsman work,, and that counts for your work
Coming from the states I appreciate everything you said in the first 5 mins. Most people ignore the long term affects of welding. With that said I think you awesome in your craft. Your fast, precise, and a great welder. Much respect
Thats it man health and safety should always come first
Investing in crypto now should be in every wise individuals list. In some months time you'll be ecstatic with the decision you made today.
Due to the fall in the stock market, I don't think it's advisable holding, it would be more beneficial and yield more profit if you actually trade on crypto currency I've been trading since the dip, and I've made so much profit trading
How does this whole process works, I'm interested in investing but still confused by the fluctuations in price
@@shorttermrentals7959 that's why you need the help of a professional who trade and understand the market more to earn good income, these professionals understand the market like it's there own farm and make s maximum profit for investors.
I heard that his strategies are really good
I'm a living testimony of Mr Gary Ralph
Really appreciate the words about safety and avoiding fumes. Id love to get a setup like you have for work but we'll see if they're keen on paying for the 3m papr system, or at the very least splitting the cost. It's a little over 2k here atm. I like using the air filter respirator most of the time but there's times where it's too hot and you just skip it.
If you are looking for high-quality welding machines, please contact me. We are a manufacturer with a history of 32 years, focusing on the production and research and development of manual arc welding machines.
i love watching your videos they're very educational thanks !
Thanks dude
Thanks bro.. Safety is a major factor.. I suffered hospitalisation and numerous doctor visits and lost shifts because of chronic sinusitis and terrible sporadic headaches because of exposure to fumes from using 2.4mm Open Arc Flux Core and Low Hydrogen electrodes (MMA) Welding for nearly 6 hours a shift. Only to find out from an excellent ENT Specialist that I was suffering because of over exposure
You see dude u understand, this is the message i want people to know
Safety is so important. To often this is skipped over and the end result is many years down the line when all of a sudden your lungs, etc., are shot and you are saying if I only knew. You can not depend on your employer to keep you safe, it is the workers responsibility for his own safety and no amount of money compensates for loss of good health. Allways enjoy your videos, always go away learning something knew and never fell that I could have spent my viewing time in a better manner. Clarence keep up the good work.
Thank you bro, and i can believe that, no amount of money can buy new lungs
I couldn’t imagine having to pay for tools to do someone’s work for them in a timely manner.
Excellent video. Keep up the good work. You are an excellent welder sir.
I've been in pipe fabrication for 32 years. I've learned a few tricks from you. Thank you for the excellent videos sir.
Thanks buddy
been a welder myself, now im a QC-Inspector. Have to say you did a good job. Welding with one hand and use the other one to turn the pipes yourself is not easy. Keep doing what you doing.
If you are looking for high-quality welding machines, please contact me. We are a manufacturer with a history of 32 years, focusing on the production and research and development of manual arc welding machines.
I use threaded rod to clean my shrouds/nozzles works pretty good
nice video! you should get a nice size motorized turntable!
Very interesting, there aren't any fab shops I know of in Aberdeen city or shire still doing piece work!
Very nice and tidy work!
Sadly here in South Africa with the economy kinda dwindling. Many workshops quite slow with an infrequent workflow. So it's really something to be in a spot where production is quite steady.
But really good content man.. Keep them coming 👍
Thank you bro
Mate you're a gun, I love these videos! Iam just starting my business after 12 years on the tools, watching how efficient you work is going to help me big time if I can sercure some pipe work. I didn't realise i've been putting on slip on flanges like a d!ck head for years hahaha.
Cheers bud, but i dont blame u, all my skills ive learnt from somone at some point, when i started it took me 45min to hang 3 flanges on a 3" tee
Gotta be welding the flanges on first mate mig don’t pull. Save you soo much time
Its true for some occasions, if i welded the flanges the job basically becomes a weld neck job and my Fabrication will need to be perfect with no room for error with a 3mm Tolerance, atleast if my fit up isnt perfect i can catch it on the flanges
Great video. Im wondering how you like up a 45°elbow when the pipe is a couple of mm smaller as it don't line up in angle iron?? Any tips are great im working at a welder fabricators and get some elbows to weld to pipe. Keep up the good work. Thankyou.
Check my videos i have 3 great videos on fitting up 45°
pay by the inch is sweet sometimes. Doesn't happen too often here in canada, but the last one i did was $20/inch. so one 10" butt weld would make me $200. I was doing 100" of weld a day and invoicing $2000/day... they thought they'd save money this route, but it kind of bit them in the ass. lol
Amazing processing brother 😍👍
Hello！We are the manufacturer of laser welding/cutting/cleaning/marking machine, did you need these kinds of equipments in production ?
Just an enthusiastic home fabricator here, but I bought a ventilated helmet a few months back prompted by your example. Safer and a lot more comfortable. Cheers for the great content.
Świetna robota gratuluję i pozdrawiam
If anyone is working where eyeballs are used as a measuring device , I suggest you find a new gig on the double 🤦♂️😂.
Fantastic video mate. Thanks for taking us through all of it. There’s loads involved in making the pipes and the prices. Keep up the great work 👍👍👍
I've wanted to buy a speed class helmet, But they are so much money. And I always have too many other bills that take priority first.
You make awesome videos keep up the fantastic work
America welding wise is considerably underdeveloped for some reason
Another great video mate, Keep them up.
Will do dude 👌🏽
Good job Lloyd’s isn’t behind you, stoving a root in They’ll not have that
Hi Calvin,
Want to pass along a great feature that stops the warping experienced in pipe welding (works on A-36 plate & structural members too). I was shown by a very savvy weldor/fitter. He always had a bucket of water & a rag nearby. Apply the wet rag in the right places...this retards the warping. This works on A-105 & s/s pipe too.
Hope this helps, Pete 🙂
some really exceptional welds there dude and great tips. thanks for sharing
Thanks dude
Looking good brother be safe out there
You too dude ✊🏽
I just started welding as a hobby (in the US) and I immediately got a (used) PAPR. My cousin has respiratory problems from welding and I want to avoid that
Like the work your doing and the safety rules you follow, that being said, I'm not a professional weld but a student in the AWS online classes have passed the ( welding fundamentals I and going on to welding fundamentals II ). Can say that Calvin knows what he's doing and how to do it safely. Thank you Calvin
Thanks bud 👍🏽 appreciate that
I Never use a respirator when MIG welding regular carbon steel. I'm sure it's bad for me, but I would hate to be wearing that rig all day. If I'm doing something like aluminum I'll wear a filter. Just my preference. Yes, I'm American xD
Everything you do i f****** proper as hell my dude.just ran across ur channel. id pay for this rather than netflix all day. Good shit man. I like to watch just to learn some new techniques. Thank you very much.
Çok güzel birde Türkçe olsa iyi olurdu
Thats so odd, my price is calculated per inch only. We get about £3 per inch and straights and little spools are the best.
If i done 100 inches alone id make £300-£350, however its divided by every fitter and welder. Luckily there arent too many in my shop and we all work at pretty much the same speeds. So a good day could be like £400 each but some can be really bad.
Welding processo Mag Co2 guês active metal?1050
Welding in America it is really crazy how no one wears a respirator but almost every euro video I see they have them on. Good on you, I should get one too
in europe it is mandatory to wear respiratory protection. in most companies
No , i am french and it’s not real no body have an helmet with the respiration, maybe for MAG weld and it’s very unusual Thankkks
Great videos! Great know how! Your skills and experience are on a well developed level. It´s such a pleasure to watch you handle your work. And i appreciate your words about the work safety..respiratory.. -This topic is coming way too short out on the field as well as on most youtube channels. I am happy that i ran into your channel. Keep it up bro! All thumbs up! Liked and subscribed. Greetings from Germany
I also agree on the importance of fume extraction and protecting your lungs, even when grinding/sanding. Do you have any videos on what particular brand/setup you recommend?
Sir I wish you good luck one question did you have time to do exercises?
Thanks dude nd all my time goes on work so no i dont
Yeah, over here in the states, I'm an ironworker. We weld with stick and innershield wire. The wire is an irritant and the second you breath any spec of dust from it, it will make you cough. Our safety and procedure for it is that because we're outside, that's good enough to protect you from getting respiratory problems 😂
First visit and very impressed, looking forward to more. Could you tell me your settings for that thickness pipe? Cheers, and thank you.
I work in this field in Northern Cal, you’re teaching me a lot and I agree on respiration and health.
We work by the hour here, I’m interested to know if you belong to a Pipefitter/welder trade Union or guild.
Funny stuff i do the same thing to gas nozzles with a center punch. I also use abicor ceramic spray on my contact tips and gas nozzle makes things last a lot longer.
Спасибо. Очень много полезного увидел 👍
All that time apprentice then getting a job you are woth every penny,im a lorry driver in uk and the work now is pick ya own £20 an hour is easy at the moment, you stay safe Calvin,O by the way your one good welder very neat job,keep up with the tig i like to see them vids im getting better but at 65 im too late to change now.
You should try Loctite SF 7900 Ceramic Shield on ur nozzles. We run metalcore wire daily as well. Only need to clean and re apply 2-3 times in a day.
I use a different brand of ceramic anti spatter and it works wonders
coat the tip and shroud with white marker it turns to carbon and prevents adhesion of spatter
Badass from the USA! Great work! Definitely the field is different than at the shop.
Greetings from Russia colleague. It turns out beautifully, keep it up.
Every thing u said about fumes is true
Appreciate Your safety. Years ago after welding copper and it made me sick the solution was to drink milk. They have come a long way in safety equipment.
You never stop learning when watching videos like these ... Top work brother 💪 keep it up 👍
Hey, love your video's. You're spot on bro. Would love to see a new video on larger diameter pipe. Might be boring, but it would mean alot
A cutting torch is not a damb hammer!
Would like to see the drawing you get to fab the pipe run
A drawings video is on the back burner i need to get around to doing it
What industry is this piping for?
Türkçe olsa bide
+1 for ranting about using a respirator. I weld in the states and have the only air fed hood Ive ever seen in person.
I see you from Spain ... it is my first year learning to weld at the institute ... thanks for your videos they help me a lot.
Dutch is the same 😂bad ventilation 😅thanks boss 👍🏻
Yoooooo hold up where did you get then jack stands I haven't seen them yet.
u have very very good skills
👍💯👍
Big props on watching out for fumes in the US! I use a fume extractor every day wouldn’t weld without it. Great work man
Bud your good at what you do dang good
Man i would have thought you would get paid more then that for a spool with that much in it as long as your happy i guess
Cheers from Canada
We're men over here across the pond
If you practice safety first where are you safety glasses sir?...
Barley starting out mig pipe practice at technical college and they past couple weeks I’ve felt my breathing get a little worse, might have to take you up on the respirator advice
This job will give you a early death if you don't protect yourself sooner then later
@@ARCONEWELDING do you know of any cheaper PAPR options?
@@ARCONEWELDING The best advise I can give you stay away from shops. I always worked outside in construction, refinery ,etc. I am 81 now, worked in Canada ,but mostly in and around Toronto and travel jobs . Nice welds!
Did you have to get vaccinated to keep working?
Naa, id quit b4 i take the vax
@@ARCONEWELDING Салам Алекум Брать Вы из какого Стране ??
@@ARCONEWELDING facts bro
@@ARCONEWELDING me too! I had to ask because I am a welder too
Всё сверкаешь... Здорово ! Напиши какой сваркой ещё варишь помимо полуавтомата?
Good work my man I am a welder myself so I understand first hand everything your talking about and I think it needs to be talked about more because not enough is being done to protect us love the video as always great content I hope what you call making money is enough because you definitely have a talent and if your looking in the right places there is money to be made all the best 👍
You're good enough to branch out on your own now and really make money .
Нифига черный сварщик!
Excelente trabajo y explicacion.
I love watching your videos, I am curious why is talking about price so secretive? You say your work doesn't want you to discuss this.
I think its a pretty personal question...
That talk about copper coating is real
Fantastic skill a real joy to watch and brilliant attitude 👍
great video man !
Thanks dude
your comments about just holding the fitting and tacking it is so true. ive seen way to many guys screwing around with jigs trying to get the fit right. 45 min later they get it, when it coulda been done in 5 min.
Yep. The only time I make a jig is when I’m fitting several of the same thing. I usually make the jig while making the first one.
Your videos make me motivated to work..😍
love your videos, keep going!
Thanks dude
How many amps and wire m/min?
Its pulse so 130A root and 180A cap
I always screw a plug into any socket or stabbing i welded on, it comes from when i was an apprentice, i was asked to weld a socket on a live pipe late on a Friday afternoon so maintenance could run an extension off it on Saturday morning, i rushed it so i could shoot off to go out for a good time Friday night, i came in Monday morning to a real ear bashing, the socket had deformed in the heat and they couldn't screw the pipe in to it, not only does the plug absorb some of the heat you know it's good to go when you screw it out.
True that, just like welding a nut on etc. Always seems to shrink that little bit, on cooling.
Merci pour les vidéo continue comme sa je suis fans :)
Ah the classic oxy cutting torch/ hammer multi tool. We've all been there.
What root gap do you use, im assuming that's all sched 40 in the video.
Nice work
Ofcourse, if it doesn't move you know to carry on burning 😅, nd usually a 3mm gap for all my sch
@@ARCONEWELDING ha ha ha. Nice. It's been nearly 7 years since I've done any mig pipe work, been doing stainless tig for the past 18 months. A nice change
Air fed masks are the way to go 👍
Nice video Good job. What is the average pay for welding in Uk? In Norway it can be from 20 pound to 30 pound pr hour.
Tbh pay is all over the place you can make £120-400+ a day or more depends who or where you work
@@ARCONEWELDING may be 120 pounds for welder helper?
0:26 still no plasma cutter 🙂
Сварщик Красавчик Привет из Таджикистана
I probably going to sound like an idiot but are U getting 16.50 for the whole welding U did in the clip ? what am I missing, honest question.
I think it was just an exampleof how his price list works as his employer didn't want him to talk about the actual prices he makes, no way would that spool be 16.50, you'd make that in one 4inch butt.
@@rich3633 Thanks for the answer , but I still have no idea how to workout his prices.
@@bobskobob276 Its just each type of weld is worth a different amount. So a 2 inch socket he might get paid £8. A 4 inch butt weld might be £20, a 4inch flange £15 an 8 inch butt £35 etc. Butts usually cost more than flanges the bigger the pipe the more money. His employer will pay him per weld he does and each type of weld will have its price eg. Above. You add all the monetary value of the welds which you completed in that day and there is your day's pay.
amazing work
👍👍👍🔥
Enjoy the video
Great video.
Перевод на русский бы...
You make it look easy😉