Video is fantastic, affordable kit and saved me a good chunk of money doing it myself over going to the dealer. These trim pieces are very easy to remove and re-install, not a single clip broke during the process.
Awesome instructions! Another video I saw had the cables run through the center console, removing the gear shift etc. which looked very cumbersome. Your way with running the cables through the side worked great! Thanks!
No problem at all. One of our main goals is to provide upgrades, repairs, and replacements that are accessable to all customers. We support and cater to DIY customers so a lot of our kits are much easier to install then pieces you will see elsewhere. I am glad our solution was helpful.
I can’t stand that my car didn’t come equipped with this feature. All my other vehicles dating back to 2015, already had this installed. Very inconvenient 😔
Very accurate and usefull, and without maybe inncesary warnings like remove sd car before doing the change or disconect battery, although i made with battery disconected, and works in both ways. Thanks.
Once upgraded to CarPlay, is the Bluetooth lag gone? I’ve essentially been bypassing this by using a Bluetooth adapter connected to AUX. The tradeoff is losing some button functions on the wheel. Does this fix the Bluetooth lag? Or is that a completely different module?
Apple CarPlay and Android Auto is a bit different becuase it is either hard wired in or for Wireless Apple CarPlay and Android Auto it uses the WiFi in the vehicle. The bluetooth connection is not strong enough for Apple CarPlay and Android Auto. The kit in this video is wired Apple CarPlay and Android Auto but neither of them having any sort of lag similar to what we see with the bluetooth feature.
Good question. I have the 2016 Mazda CX-5 with the in the dash screen. So I'm guessing this means I would have to have the screen unit replaced as well. 😞
Hey I own Mazda 6 2016. do you have a guide installing the kit on the vehicle? and will this upgrade interfere with connecting a subwoofer and new aftermarket speakers?
This is the installation video for this package. We also have a PDF installation guide as well. infotainment.com/cdn/uploads/Mazda-Connect-Apple-CarPlay-_-Android-Auto-Upgrade-Installation-Guide.pdf
Understood, no problem! We have this page on our website where you can punch in your zip code, and you'll get a list of the closest verified installers in your area. infotainment.com/verified-installers/ The software update needs to be ran before the hardware installation, or else the software will hit an installation error.
I am in Australia and I have the mazda 2 2015 with MZD Connect infortainment, is this going to suit me? Every time I look for a retrofit kit, it states that compatibility is for 2016-2019 models so I am not sure it will wok on mine. thanks.
Yes, I brought one from ali Express and have been using mine for 3 years now. If yours is in the middle console start removing the dash from the middle console
As long as it is above 30.xx.xxx you should be fine. 59 should have no issue. infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
Hello, My Mazda CX5 2017 display is not working. The screen is not broken, but all I can see is the mazda logo. The reverse and side camera appears on good days. I always wanted to upgrade to apple carplay, but seeing your video, it seems that the Mazda firmware is critical for this upgrade. Do you have another option for when the firmware is not available like mine. I am told the display unit will require north of $1000 to repair.
Ah we don't have a solution at this time. It sounds like the radio module either has a motherboard issue or severe software corruption. I would check around for radio repair facilities to see if it can be repaired for less than $1000. Is that the price that Mazda quoted for a replacement radio unit? Or is that the repair price they offered?
I am having an issue with Ghost Touch on my Mazda. Can i install this and disconnect the touch screen ribbon cable? Also, will my phone blue tooth still work if i choose not to plug into the USB?
Since CarPlay is primarily accessed through the touch screen, I highly recommend having the screen replaced or repaired. The bluetooth function will remain the same, so you can still use bluetooth for audio and phone calls... But if you're trying to use CarPlay, the phone must be plugged in, and you have to use the touch screen.
Mazda did not produce a wireless Apple CarPlay and Android Auto unit until 2023-24 so vehicles before that do not have access to that feature yet. This is something we are still working on. Use this form to stay updated. infotainment.com/product-live-interest-form/
Yours is already up to date to be compatible: "Please ensure your existing Mazda Connect system has a software level of 30.00.XXX or higher." This kit will include an update as well to update to the latest software.
This is fully compatible. This is designed to add Apple CarPlay and Android Auto to your vehicle. infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
This particular package is tuned to factory OEM specification. Unfortunately we would not be able to offer any advice on after market programming services.
That's correct. If you already had functioning CarPlay and it is no longer recognizing the phone or charging the phone, I would think that just replacing the USB interface would do the trick. Maybe you could check fuses for anything that references "Outlets" or "USB Interface" first just to verify (that is if you are not getting a charge to the phone when plugged in)
i recently bought a 2016 Mazda CX-3 i wanted to upgrade the firmware so i can get the upgrade kit for apple carplay i just want to know is it possible to update the firmware for asian version to English version i have the firm ware needed and my current OS version 56.00.401 JP M is and the update file is OS version NA_70.00.335C
We unfortunately don't have the Japan version of this software, and I do not think that the radio will accept the update being specific to a different region. I highly recommend looking into some forums to see if someone has successfully converted the region from Japan to North America via software updates, perhaps there is a work-around.
Yes this upgrade would be fully compatible with a 2019 CX-9 and this is a very easy upgrade to install. Cost on this $299.95. infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
Absolutely, well, technically the software is part of the installation kit. We don't offer the software outside of the kit. infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
Apple CarPlay and Android Auto do not require any additional manual updates. Those features update daily automatically. As for discounts if this is your first order with us you can sign up with us in the top right of this link and it will give you a 5% sign up discount. infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
No this will come with a USB media flash drive for the programming aspect. Here is the link. infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
I had this all connected and working well, someone hit my car and it went to the dealership, now my car play isn’t working 🙄 how do I troubleshoot and get this working again.
If the car play quit working after the collision, it's possible that the connections to the USB hub may have become disconnected. But if the car play quit working after the dealership service, it's possible they could have altered the software or replaced the radio unit and it no longer has the car play. You can try re-running the software USB to see if that fixes the issue (as long as the software is above 30.xx.xx)
Please ensure your existing Mazda Connect system has a software level of 30.00.XXX or higher. As long as the current software level is at the minimum requirement or higher, it will be compatible.
No unfortunately, we have tested it but we do not have a solution for the Scion at this time. Use this link and we will keep you updated if something like that is released. forms.zohopublic.com/infotainmentcom/form/RepairAuthorizationForm/formperma/t_HBejMEDO5QMtdFj2kDGZfKhbecXYHYQoJh9WjT864
I've done the installation the same way all seems to work. my iphone does connect wie bluetooth but my android auto dosn't work with the usb cable. the usb slot does not even work.... my phone does not get recognized. but even the carplay works, sometimes it's very laggy and is super slow. could the module be broken?
This particular upgrade is meant to gain the Apple Carplay/Android Auto functionality on vehicles that are not equipped with the feature from the factory. This upgrade requires a hard wired connection to access the feature. It will not be a wireless connection.
You will still have bluetooth for Audio streaming and hands-free calling but bluetooth connection is not strong enough for Apple CarPlay and Android Auto. This generation is wired. They should be releasing a wireless system for the 24-25 vehicles.
You'll want to ensure your existing Mazda Connect system has a current minimum software level of 30.00.XXX or higher. As long as your vehicle is at or above the minimum, it will be a compatible upgrade.
Video is fantastic, affordable kit and saved me a good chunk of money doing it myself over going to the dealer. These trim pieces are very easy to remove and re-install, not a single clip broke during the process.
Great to hear! Our goal is to help make things as easy as possible. We hope you enjoy the upgrade.
Awesome instructions! Another video I saw had the cables run through the center console, removing the gear shift etc. which looked very cumbersome. Your way with running the cables through the side worked great! Thanks!
No problem at all. One of our main goals is to provide upgrades, repairs, and replacements that are accessable to all customers. We support and cater to DIY customers so a lot of our kits are much easier to install then pieces you will see elsewhere. I am glad our solution was helpful.
Great instructions. About an hour and a half install, easy peasy.
You got it!! 🙌
I can’t stand that my car didn’t come equipped with this feature. All my other vehicles dating back to 2015, already had this installed. Very inconvenient 😔
It is very inconvenient. Luckily this upgrade is a fairly simple procedure!
I am looking at my dashboard and it laughed at me 😂😂😂
Mars-da 😂
Very useful! Followed your directions and it all worked well. Thank you!
Thats great to hear! Glad we could help. I hope you enjoy the unit and the new features!
Very accurate and usefull, and without maybe inncesary warnings like remove sd car before doing the change or disconect battery, although i made with battery disconected, and works in both ways. Thanks.
Glad we could help!
Once upgraded to CarPlay, is the Bluetooth lag gone? I’ve essentially been bypassing this by using a Bluetooth adapter connected to AUX. The tradeoff is losing some button functions on the wheel.
Does this fix the Bluetooth lag? Or is that a completely different module?
Apple CarPlay and Android Auto is a bit different becuase it is either hard wired in or for Wireless Apple CarPlay and Android Auto it uses the WiFi in the vehicle. The bluetooth connection is not strong enough for Apple CarPlay and Android Auto. The kit in this video is wired Apple CarPlay and Android Auto but neither of them having any sort of lag similar to what we see with the bluetooth feature.
Thank you for the instructions, i can follow and install successfully
Glad we could help!
Can I do that for my Mazda 3 hatchback 2015? I have a big screen in my car exactly the same but it’s just 2015. Thank you!
Unfortunately we do not offer anything for the Mazda 3 until 2017. We have not found a solution yet for the 2015.
would it work for a mazda cx5 2016
Unfortunately the CarPlay and Auto upgrade we offer starts compatibility at 2017 for CX5.
Good question. I have the 2016 Mazda CX-5 with the in the dash screen. So I'm guessing this means I would have to have the screen unit replaced as well. 😞
Thank you so much. Followed every step and it worked perfectly. You’re awesome!
Glad we could help!
will I be able to use the touch screen while in motion or will it still be locked to only when stopped?
Mazda ensured this cannot be changed. Even with this upgrade it cannot be used in motion unfortunately.
Hi, just wondering what tool you used to get the 10mm bolts off. I can’t seem to get them out.
This was done using a 10 MM wrench socket on a generic muti use wench.
Use an impact wrench
Hey
I own Mazda 6 2016. do you have a guide installing the kit on the vehicle? and will this upgrade interfere with connecting a subwoofer and new aftermarket speakers?
This is the installation video for this package. We also have a PDF installation guide as well.
infotainment.com/cdn/uploads/Mazda-Connect-Apple-CarPlay-_-Android-Auto-Upgrade-Installation-Guide.pdf
Can you recommend anyplace to get this installation done after you purchase the kit? I'm pretty sure, I can't do this myself
Understood, no problem! We have this page on our website where you can punch in your zip code, and you'll get a list of the closest verified installers in your area.
infotainment.com/verified-installers/
The software update needs to be ran before the hardware installation, or else the software will hit an installation error.
I am in Australia and I have the mazda 2 2015 with MZD Connect infortainment, is this going to suit me? Every time I look for a retrofit kit, it states that compatibility is for 2016-2019 models so I am not sure it will wok on mine. thanks.
Unfortunately this is designed for North American vehicles only.
Yes, I brought one from ali Express and have been using mine for 3 years now. If yours is in the middle console start removing the dash from the middle console
Hi, for a cx9 2023 can replace/upgrade the screen from 8 to 10,25?
We don't have that just yet, but we are doing a lot in R&D for new upgrades. Please submit this form!
infotainment.com/product-live-interest-form/
Can I use the 59 version for this ? Or do I absolutely need to go get it updated?
As long as it is above 30.xx.xxx you should be fine. 59 should have no issue.
infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
Hello, My Mazda CX5 2017 display is not working. The screen is not broken, but all I can see is the mazda logo. The reverse and side camera appears on good days. I always wanted to upgrade to apple carplay, but seeing your video, it seems that the Mazda firmware is critical for this upgrade. Do you have another option for when the firmware is not available like mine. I am told the display unit will require north of $1000 to repair.
Ah we don't have a solution at this time. It sounds like the radio module either has a motherboard issue or severe software corruption. I would check around for radio repair facilities to see if it can be repaired for less than $1000. Is that the price that Mazda quoted for a replacement radio unit? Or is that the repair price they offered?
I am having an issue with Ghost Touch on my Mazda. Can i install this and disconnect the touch screen ribbon cable? Also, will my phone blue tooth still work if i choose not to plug into the USB?
Since CarPlay is primarily accessed through the touch screen, I highly recommend having the screen replaced or repaired. The bluetooth function will remain the same, so you can still use bluetooth for audio and phone calls... But if you're trying to use CarPlay, the phone must be plugged in, and you have to use the touch screen.
Thank you, appreciate the feedback!
Why does it only work when the phone is plugged in
Mazda did not produce a wireless Apple CarPlay and Android Auto unit until 2023-24 so vehicles before that do not have access to that feature yet. This is something we are still working on. Use this form to stay updated.
infotainment.com/product-live-interest-form/
Is the touchscreen only for 2020 cx5s? If I do this in a 2017 cx5 will it become touchscreen?
This upgrade does not make the radio touch screen unfortunately.
My OS is 59. Of Mazda 3 2016.. how to update it before CarPlay??
Yours is already up to date to be compatible:
"Please ensure your existing Mazda Connect system has a software level of 30.00.XXX or higher."
This kit will include an update as well to update to the latest software.
Hi i just got my Mazda Cx5 2019 but unfortunately not having the apple CarPlay so what if i bought this for my car and apple CarPlay still not work ?
This is fully compatible. This is designed to add Apple CarPlay and Android Auto to your vehicle.
infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
You were ripped off twice
Can I do the same for my infotainment system in mazda cx9 2018?
Yes your 18 CX9 is fully compatible with this upgrade.
infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
I have to update my Mazda connect system as it is 59.00 version..
Will it work for cx9 2016?
Will it work for the CX-9 2016?
Hello there! Yes, as long as your current software version is above 30.00.xxx
Have you (or anybody else) tried to run MZD AIO tweaks on these after installation? Just curious if it would work.
This particular package is tuned to factory OEM specification. Unfortunately we would not be able to offer any advice on after market programming services.
is there an easier way so that I don'r have to remove anything, but hack it with a USB stick and install a file or an app to the OS?
No, after extensive testing we have found this is the easiest way to gain Apple CarPlay and Android Auto.
@@Infotainment_nav Is it a chore to snap everything back onto the dash board? I head sometimes the pins bend and won't fit back on perfectly. :(
@@Infotainment_nav Thanks!🙂
If I’m just replacing the port I don’t have to do all the specs with the screen just pop in a new one on my 2020 since the port does not work
That's correct. If you already had functioning CarPlay and it is no longer recognizing the phone or charging the phone, I would think that just replacing the USB interface would do the trick. Maybe you could check fuses for anything that references "Outlets" or "USB Interface" first just to verify (that is if you are not getting a charge to the phone when plugged in)
i recently bought a 2016 Mazda CX-3 i wanted to upgrade the firmware so i can get the upgrade kit for apple carplay i just want to know is it possible to update the firmware for asian version to English version i have the firm ware needed and my current OS version 56.00.401 JP M is and the update file is OS version NA_70.00.335C
We unfortunately don't have the Japan version of this software, and I do not think that the radio will accept the update being specific to a different region.
I highly recommend looking into some forums to see if someone has successfully converted the region from Japan to North America via software updates, perhaps there is a work-around.
Can i do that to my mazda cx-8 2019?
Can you send the Vin? I can check with my tech's. You can send it here or at taylor@infotainment.com
2019 CX-9 will work? Didn’t come with CarPlay.
I know this company is very reliable. I did plug-in play with my 2018 Altima.
Yes this upgrade would be fully compatible with a 2019 CX-9 and this is a very easy upgrade to install. Cost on this $299.95.
infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
What’s the difference between this and the one on Amazon that also has wireless compatibility and is a fraction of the cost? $67.86 to be exact.
@@iAmJayliinwhat the link to the Amazon one?
Is software available for cx3 2017 ??
Absolutely, well, technically the software is part of the installation kit. We don't offer the software outside of the kit.
infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
I had the hardware as gift..but i was looking to find or buy the software..
Going to try this on my 2020 mazda cx-5. Does the media player require usb stick updates from time to time?
And are there any coupon codes available? 👀👀
Apple CarPlay and Android Auto do not require any additional manual updates. Those features update daily automatically. As for discounts if this is your first order with us you can sign up with us in the top right of this link and it will give you a 5% sign up discount.
infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
Do you need the SD card?
No this will come with a USB media flash drive for the programming aspect. Here is the link.
infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
I had this all connected and working well, someone hit my car and it went to the dealership, now my car play isn’t working 🙄 how do I troubleshoot and get this working again.
If the car play quit working after the collision, it's possible that the connections to the USB hub may have become disconnected. But if the car play quit working after the dealership service, it's possible they could have altered the software or replaced the radio unit and it no longer has the car play. You can try re-running the software USB to see if that fixes the issue (as long as the software is above 30.xx.xx)
What about for a mazda 3 sport 2024.
Please ensure your existing Mazda Connect system has a software level of 30.00.XXX or higher. As long as the current software level is at the minimum requirement or higher, it will be compatible.
Does this work for scion ia since it has the mazda design?
No unfortunately, we have tested it but we do not have a solution for the Scion at this time. Use this link and we will keep you updated if something like that is released.
forms.zohopublic.com/infotainmentcom/form/RepairAuthorizationForm/formperma/t_HBejMEDO5QMtdFj2kDGZfKhbecXYHYQoJh9WjT864
I've done the installation the same way all seems to work. my iphone does connect wie bluetooth but my android auto dosn't work with the usb cable. the usb slot does not even work.... my phone does not get recognized.
but even the carplay works, sometimes it's very laggy and is super slow. could the module be broken?
Hmmm. That's not normal. Was this purchased through us?
I plug in a dongle into my centre (2022 Mazda 6 atenza) console and apple car play works wirelessly without plugging my phone in?
This particular upgrade is meant to gain the Apple Carplay/Android Auto functionality on vehicles that are not equipped with the feature from the factory. This upgrade requires a hard wired connection to access the feature. It will not be a wireless connection.
Where to get this firmware?
It's included in our kit! Product link: infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/m-kit30/
Do i need to connect the phone always withe cable? can be used with bluetooth?
You will still have bluetooth for Audio streaming and hands-free calling but bluetooth connection is not strong enough for Apple CarPlay and Android Auto. This generation is wired. They should be releasing a wireless system for the 24-25 vehicles.
Tidy.
Thanks.
Would it work for Mazda 6 2015?
You'll want to ensure your existing Mazda Connect system has a current minimum software level of 30.00.XXX or higher. As long as your vehicle is at or above the minimum, it will be a compatible upgrade.
Will it work for the CX-9 2016?
Absolutely, as long as the current software version is at least 30.00.xxx