Macbook Pro / Macbook Air 2013-2017 Hard Drive Swap - Not recognizing hard drive

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ส.ค. 2022
  • This video demonstrated what to do if your Macbook pro/air is not recognizing the boot drive or hard drive. In my case, I had to replace my Late 2013 Retina Macbook pro which I did with a Crucial P2 NMVE M.2 Drive. Link: www.amazon.com/gp/product/B08...
    I also Utilized M.2 NVME SSD Convert Adapter, 12+16pin M.2 NGFF M-Key SSD Convert Card
    Link: www.amazon.com/gp/product/B07...
    Note: Make sure your model uses the same 12+16 pin as it may be one of the other two pin configurations. Type your own model then SSD adapter into Google or Amazon to find your correct adapter if this isn't the same as yours.
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 10

  • @emiel333
    @emiel333 11 หลายเดือนก่อน +2

    Great video. I was looking for a how to replace the internal SSD on MacBook tutorial for a while. This helps me out perfectly, thanks!

  • @jaipalreddy4894
    @jaipalreddy4894 5 หลายเดือนก่อน

    I have used similart adapter, used a kingston 1tb nvme. sopme how managed to install the mac os, later it was not booting.

    • @ankertechtips645
      @ankertechtips645  3 หลายเดือนก่อน

      Sounds like an issue with the OS. Try a fresh install.

  • @hdhjejhd
    @hdhjejhd หลายเดือนก่อน

    I have a problem with an iMac 2017, I already did everything and I can't find the solution, at first it detected the ssd with the adapter, I have a crucial 1 TB P3, I connect it to the motherboard and when I put the bootable usb with MacOs Ventura does not recognize it internally, if that same ssd I put it externally if the iMac recognizes it, I do the format externally and at the moment of putting it internally it it does not recognize it. I already installed the macOS Ventura by external means and I put it internally and it doesn't recognize it either, I don't know what to do I've been testing for a month and I have to be assembling and disassembling the iMac, I hope someone can help me, The disk utility does not recognize it, I already made the list disk and nothing does not appear the ssd m.2 nvme, I am totally blocked, do I need to do it with high sierra and then update to Ventura?

    • @aaronaaronbanana2889
      @aaronaaronbanana2889 หลายเดือนก่อน

      Which adapter are you using? That could the problem. I’d recommend trying with a new/different adapter.

  • @gvanpogi
    @gvanpogi 4 หลายเดือนก่อน

    i put the ssd with the adapter but its not even detected in diskutility

    • @ankertechtips645
      @ankertechtips645  3 หลายเดือนก่อน

      Try reseating the SSD. If that doesn’t work, try a different SSD

  • @AlienFactor
    @AlienFactor 4 หลายเดือนก่อน

    Omg I need help