Quick question. Why is it so difficult to get a CARB certified catalytic converter for my 2015 wrx? There some aftermarket companies saying they make them but all are out of stock. Subaru wants nearly $2000 for one.
Hey Mrsubaru, honest question about 2010 impreza 2.5i. Is there a way to make or use a ram/cold air intake without it messing with the maf sensor reading making the car run rich? I've been researching for a few weeks now, and can't really find any clear cut way to run an aftermarket intake, for sound and whatever little power it will gain me. Nothing wrong with the stock intake system, I'm just used to always being able to run an intake with cone filter.
Mr Subaru, I have a 2015 Legacy 2.5 with a P1603 (engine stall detected) code and it gets jerky, stumbling on acceleration or just cruising would you possibly know how I can fix this?
Hey. I was wondering if you can make a video on how to change the power steering rack (rack&pinion) on a 08 subaru legacy. If you can help me out, ill glady appreciate it.I can't find any videos on how to do it. Love your videos!
+cito vazquez if I had one that needed a rack replacement, I would. Email me @ MrSubaru1387@gmail.com I'll try to find the section of the service manual on it to send you.
+Stephen Lamore most likely a rack replacement. You maybe able to get the seals separately, but I'm not sure. opposedforces.com/parts/legacy/us_b13/type_41/steering/power_steering_gear_box/illustration_3/
These EJ25s are ticky. As long it doesn’t like like a knocking sound. And is consistent. I think ir most likely the injectors. They make a ton of noise.
Hi Mr Suubaru. I recently have been experiencing the following codes on my 2017 Wrx base: POO0O Misfire related ("PFFFE", "PFFFF") PO171 PO300 PO303 Please, any suggestions as to what I should do? I want to add that I did remove and clean the front and rear oxygen sensors, in an effort, to remedy the issue, to no avail. Prior to the this I was only receiving the P0000 & P303 codes.
I do have a Cobb stage one kit and computer on it. Axle back exhaust and no other modifications. I recently bought an upgraded hose that Subaru provided because the old one was leaking a small amount of oil. It is a simple plug and short hose that is located on the front passenger side and connects to the turbo. A known issue with this particular part. It was simple to replace once I unplugged and removed the fan on that side.
subae for some reason, I had to reteach my ecu. There’s a video on it somewhere, worked really good. Fixed the rough idle. And an other reason was that someone connected both the ob1&2 sensor on my 02 wrx. Believe we unplugged the ob1 and the CEL came off.
Excellent video friend, beatiful car, i would like to be closer so that you are the one who could perform the ma in the na nce maintenance to my impreza 2001...greeatings from chile
I bought a used 2014 impreza wrx ltd from the used car lot with almost 87k on it two weeks ago in hawaii for 20k. it was driving relatively smoothly until today. had a lot of jumping engine noise and jerking at low mph on gears 1 and 2, almost as if i was about to stall out. The cel ,cruise control and the traction control lights came on. There was some white smoke at one point but it was thick and very brief. I am just curious as to what the problem could be. Ive driven it around for a little bit and no major issues besides lower gears (the lights are still on).
@Collin sweet for my 2011 hatch it was a misfire on cylinder 1 and 3. No lights on the drive to work, then turn the car on to drive home and boom! Could also be a loose gas cap or even vacuum leak. Did u ever figure it out?
just did the idle air control valve removal and cleaning and she's back to smooth purrring .Thanks.
Where’d you find the iac on your wrx?
@@owenbatchen8927 maybe they have an older subie...
I got a 2012 where is it
Bro, I’ve always loved your videos man. Very straight forward and well informative.
+Subaru WRX glad you enjoy the videos! 👍
Came here for the Subaru. Got Linkin Park as a bonus.
I found that a vacuum gauge was crucial in diagnosing a rough running 2.2.Oldschool but very telling!
+River rat yup, unfortunately I didn't have a vacuum gauge with me. It was in my toolbox 20 mins away from me.
Quick question.
Why is it so difficult to get a CARB certified catalytic converter for my 2015 wrx?
There some aftermarket companies saying they make them but all are out of stock. Subaru wants nearly $2000 for one.
you can kind of hear the vacuum leak at 1:34 im pretty sure.
nmendoza1234 that’s the power steering whine
damn, i miss my 13 WRX
Hey Mrsubaru, honest question about 2010 impreza 2.5i. Is there a way to make or use a ram/cold air intake without it messing with the maf sensor reading making the car run rich? I've been researching for a few weeks now, and can't really find any clear cut way to run an aftermarket intake, for sound and whatever little power it will gain me. Nothing wrong with the stock intake system, I'm just used to always being able to run an intake with cone filter.
I know this was years ago... but was that an " ADESA" FLOOR MAT???
Mr Subaru, I have a 2015 Legacy 2.5 with a P1603 (engine stall detected) code and it gets jerky, stumbling on acceleration or just cruising would you possibly know how I can fix this?
Can you help me with this code P04db on MY2013 base WRX? I changed the pcv should I have changed the white sensor up top as well? Please help! ty!
Did you do any relearn procedures after the repair?
What’s the clicking noise at 6:16? Mine does the same curious...
Normal injector noise
Have u ever had newer stis come in with complaints of them making weird smells sometimes
No to both. Lol
No newer STi, no to weird smells.
U messed up my assuming just cuz he has mods its going out, like you said, start with the simple solutions like a boost leak or 02 sensors
fantastic video mate! helps heaps
+armstrn glad you enjoyed it.
Those are some fancy shop shoes! 6:28
+Devin Dykhoff thanks. Lol. They're work boots.
Hey. I was wondering if you can make a video on how to change the power steering rack (rack&pinion) on a 08 subaru legacy. If you can help me out, ill glady appreciate it.I can't find any videos on how to do it. Love your videos!
@mrsubaru1387
@MrSubaru1387
+cito vazquez if I had one that needed a rack replacement, I would. Email me @ MrSubaru1387@gmail.com I'll try to find the section of the service manual on it to send you.
My steering column seal that goes into the rack and pinion is leaking on my 05 LGT what kind of job am I looking at?
+Stephen Lamore most likely a rack replacement. You maybe able to get the seals separately, but I'm not sure. opposedforces.com/parts/legacy/us_b13/type_41/steering/power_steering_gear_box/illustration_3/
Will the vacuum leak throw a CEL code? My 2011 may have a similar issue. Ill go over her soup to nuts when its not 15 outside but figured I’d ask
Do 2014 Crosstreks have an IAC valve? I can't find any videos on locating it.
No
Can anyone tell me why it has such a noticeable tick on idle? My car does the same thing but it’s a 2011 Wrx.
Injector tick
These EJ25s are ticky. As long it doesn’t like like a knocking sound. And is consistent. I think ir most likely the injectors. They make a ton of noise.
Hi Mr Suubaru. I recently have been experiencing the following codes on my 2017 Wrx base: POO0O
Misfire related ("PFFFE", "PFFFF")
PO171
PO300
PO303
Please, any suggestions as to what I should do?
I want to add that I did remove and clean the front and rear oxygen sensors, in an effort, to remedy the issue, to no avail. Prior to the this I was only receiving the P0000 & P303 codes.
I also cleaned the MAF & MAP sensors.
It was after I cleaned the oxygen sensors that I started getting more codes. The cylinder 3 code and P0000 codes have been consistent throughout.
I used proper cleaner for the MAP & MAF sensors. I used carbon cleaning spray for the oxygen sensors.
Please help.
I do have a Cobb stage one kit and computer on it. Axle back exhaust and no other modifications. I recently bought an upgraded hose that Subaru provided because the old one was leaking a small amount of oil. It is a simple plug and short hose that is located on the front passenger side and connects to the turbo. A known issue with this particular part. It was simple to replace once I unplugged and removed the fan on that side.
I have a 2010 forester xt , I’m looking for the turbo boost pressure sensor.
Can you help me find it?
Is there an email I can use?
Thanks
I’m pretty sure that engine does have a boost pressure sensor. I believe it calculated boost by values of a few different sensors. I could be wrong.
Can you make a video what are the vacum lines for? How thet work and their funtion etc
+Rulius Raul Estevez Vargas this vacuum line ran from the intake to the recirculation valve.
Why is there no commentary or discussion of what he's looking at?
Question, can a bad head job cause cylinders misfires?
+The Awesome Review TV yes.
My Subaru 03 outback is making a wining nose. Would that be a bad bearing?
+Damon Vis hard to say without more info.
@@MrSubaru1387 lol
Mucho bueno saved mucho denero checking out your videos
+Piri Hern glad to help! 👍
I know you mentioned it before but where do you buy your parts.
+RayBan FPV Subaruparts.com primarily. Or oem through Amazon prime. Or my local Subaru dealer.
Thanks again
+RayBan FPV you're welcome. 👍
What makes an idle “rough”?
subae for some reason, I had to reteach my ecu. There’s a video on it somewhere, worked really good. Fixed the rough idle. And an other reason was that someone connected both the ob1&2 sensor on my 02 wrx. Believe we unplugged the ob1 and the CEL came off.
By the way you make great videos
+RayBan FPV thank you. Glad you enjoy them. 👍
Just added 5.4 qts of valvoline modern engine for the 3rd time. Car now has rough idle and slight miss or backfire. Why is this?
Same with me. Stalled on my way home from work at a light.
@@Pandaheart69666 run Castrol edge will run 1000 times better, use the gold bottle change every 3k
Likely un related. Sounds like a fueling issue or maybe a vacuum leak. Worst case would be compression loss.
Excellent video friend, beatiful car, i would like to be closer so that you are the one who could perform the ma in the na nce maintenance to my impreza 2001...greeatings from chile
+Ricardo Cornejo greetings! Glad you enjoy the video.
I bought a used 2014 impreza wrx ltd from the used car lot with almost 87k on it two weeks ago in hawaii for 20k. it was driving relatively smoothly until today. had a lot of jumping engine noise and jerking at low mph on gears 1 and 2, almost as if i was about to stall out. The cel ,cruise control and the traction control lights came on. There was some white smoke at one point but it was thick and very brief. I am just curious as to what the problem could be. Ive driven it around for a little bit and no major issues besides lower gears (the lights are still on).
Just happened to me too… tag me if you get an answer.
@@collinsweet3308 it was a faulty o2 sensor.
@Collin sweet for my 2011 hatch it was a misfire on cylinder 1 and 3. No lights on the drive to work, then turn the car on to drive home and boom! Could also be a loose gas cap or even vacuum leak. Did u ever figure it out?
That poor rear bumper
+Tyler Pedigo yea. She's rough. Was a repo.
Sounds like my 2002 which i cannot figure out
Hey That's me today 🤣
The first in like .greating of chile
+Ricardo Cornejo greetings!
o ya ~WRX
+Andrew Yeh working on an 05 STi now. Getting some turbo stuff finally.
I knew it vacume leak.
Lol mine is idling under 1k
Can you fix my car lol
Subaru, worst cars of all time. My 2018 crosstrek is a complete 🍋
Wtf!!!!
??
What they decided to use in place of the proper vacuum line. sweet baby Jesus!!!!
Ah, yeah, been a while since looking at this one.