Ford Quick Tips: #4 Ford Capless Fuel Filler Maintenance
ฝัง
- เผยแพร่เมื่อ 5 เม.ย. 2014
- Once cleaned you can install this locking cap to keep debri out:
www.amazon.com/gp/product/B001...
In this video I show how to maintain your filler neck and fix the evap leaks causing your check engine light on your Ford Fusion.
The most common code for this concern is P0442.
Clearing codes properly-
• How To Clear Your PCM'...
Check me out on Facebook-
/ 651813524932940 - ยานยนต์และพาหนะ
Thank you! Did this on my 2010 f150 solved my problem and was able to pass inspection! Your the man!
I just picked up a 2009 F-150 with just 70,000 miles. I will be looking after the filler neck, and keeping it clean. I read about the funnel in the owners's manual and checked to make sure it was there. Thanks for this.
Thank you VERY much for this info video. Have a 2010 Fusion SEL 2.5 and the check engine came in the other day. Tried cleaning fuel neck as you suggested. After first trip and restart...light out:) Thanks again
doing this tomorrow for my 11 ford edge, keeping it simple and hoping this works; ordered the evap purge valve too hoping this helps, everything ford this is the channel for weird stuff like this. thank you
It works on my Ford Fiesta 2013 SE. I did it outside walmart to give it a try And it works! I didnt use that tube thing i just cleaned around it. It cost me less than $20. Thank you so much! God bless man!
Thanks so much for this info. I have a 2014 Edge and the filler cap is still recessed like the Fusion you show, not flush like the newer one. It looks clean and well-sealed at this point. I did notice a diagram inside the door that indicates to wait 5 seconds before pulling nozzle out after fill-up.
I've already had the purge valve replaced in the last week and while the check engine light did not come on this time, it didn't want to start after filling today. Been driving it since October so I guess it just took time to show up, but the dealer records did indicate whoever owned it back in July 2014 brought it in for check engine light but they couldn't duplicate it.
I'll wait the 5 sec next time and cross my fingers. Best example of "it ain't broke don't fix it." Stupid move Ford.
Thank you so much for posting this. I followed it to the tee, and it worked. I just came back from a 300 mile trip, and no code returned. 👍👍
I did exactly what you said to do except for my 2013 F150 didn't have a capless funnel I picked one up at advance auto for little under 2 bux, sprayed very little WD40 and sure enuf that next day warning message was gone, lol!! I used compressed air from a can. Thank you so much for your help. PLEASE Keep posting videos.
Even now this is relevant! I have a 2014 Mustang and I appreciate this more than you know!! You saved me so much money!
Same here but for a 2016 f150 😂 just bought it was freaking out like wtf then I realized the gas cap doesn't seal 😂
About to try this on my 2012. Hope it helps
I had this happen on our 2019 Ford Edge SEL with only 10,000 miles on it. Looks like Ford has really improved on this problem.
So my 2013 F-150 with 24000 miles started throwing check fuel filler door warning so I was blessed to locate your video and I did exactly what you recommended. It cleared the warning and engine light. Thank you so much for your expertise. God’s blessings on your life. Now I can inspect my truck. You are the MAN.🙏😊
He is the master of knowledge on the Ford vehicles. You better watch all his truck videos to know ahead of time what will happen to your truck.
Thanks for this quick video! It never occurred to me that there might be seals on this "feature" that could have a problem. I will take a look at my 2014 Focus when I get it back from the service department sometime next week.
Thanks for this! I have a 2011 Mecury Milan. I started getting the check fuel fill inlet months ago. Then about a month ago the check engine light. Knew the 2 were related. But didn't know what to do. Used your tip on Saturday morning. Check engine light is now off & my avg. mpg is back to normal. Thanks!!!
Dude! Thank you!!! 2015 Ford Explorer Sport. Got the "Check Fuel Fill Inlet" message after a fill up. I thought either my locking cap or that hinged door was bad. I removed the cap and used a pen to make sure the little door was working. After 2 days of driving (getting the "check inlet" message at every start-up) it finally threw a P0456 CEL. I found your video and did exactly what you said, then cleared the code. Hasn't come back in 2 fill-ups.
Thank u for the explanation behind the video and specifically telling us that Ford recommends doing this maintenance periodically. Now I have to do it on my daughter’s Buick Enclave.
Thank you so much for your expertise on helping me fix my own problem without taking me Ford Expiditiion ( 2013) to the shop. This fuel valve sensor has been giving me troubles since I bought it....then they said to never overfill it with gas. So I unplugged the battery like you said in a previous TH-cam ...still came on...now I know I will go buy some air- pray and clean out the the surrounding area and put in some fuel cleaner. Please let me know if there is anything else you can suggest.. Much love and grattitude for your help! Stay blessed always 🙏💞
Thanks a lot Brian. I have a 2014 f150 5.0 with a p0451 and I preformed this exactly and reset the code and it’s been several hrs without the check engine light coming back on. I was very close to going to the stealership to get a 121.00 evap pressure sensor. Thx again
Thanks. Have 2009 FORD Escape and P0457 on the code reader and smelling gasoline inside the cabin while driving. Will try this first before going to shop. A lot of good information
Thanks for putting this up. My 2015 Mustang was throwing constantly throwing codes. I tested if it was the cap by slapping a piece of duct tape on it. No more codes so far...
After a few days to really give it a chance to throw a code, I'll try this. Much appreciated!
Wow, there's a solution in search of a problem! Thanks for showing how to make the bugger work again.
I have a 2012 Ford Fusion. This worked! The check engine light went off. Thanks so much! This saved a ton of money if i had taken it to a mechanic!
Seriously, thanks for all the time you spend on your videos.
Thanks for the video. I have a 2012 SEL and my engine light came on and I knew what it was right away from watching this video before I bought the car.
Thanks for the tip my 2012 Ford Escape is haunted by the engine light cause of fuel evap sometimes it goes away but it always comes back ! I will try your fix today . Thank you , Joe
"Easy Fuel" like if removing a cap was such a big hassle lol. I prefer the good old cap.
Mad you dont have
Cap is really no hassle! More check engine lights involving gas refueling than ever.
Super stupid idea from Ford they created work for themselves no wonder their stock is less than 3 bucks
@@kgardner004 Ford stocks are actually $12.30 not $3
@@judybigbooty108 oh maybe they're trying to make a comeback
Great video! My daughter just bought a 2012 Ford Focus and the first day she filled up the tank she got a code. The dealer is 99% sure this is it. I'll clean it out, clear the code and see what happens. Thanks again for the great video!
Thank you! Saved me 4 hours round trip to the deraler and probably $250 in unnecessary repair.
Hello FordTechMakuloco. Thanks for the tip. I have a 2010 Taurus SEL and my check engine light was on. It was giving me the 'small evap leak' code P0442. I follow your instructions and it worked...lol. It's been a few days now and my light has not come back on. Thanks for the tip.
2010 Ford Fusion. Works every time. Thanks for the video. I used WD40 cleaned it out. Reset check engine. First time was $450 at garage cause they convinced me to change sensor. Thanks again for your video.
😲
Thanks!!!
Thank you it worked on my 2013 mustang. The key was to make sure to spray the WD 40 and work it in with the funnel.
I had gasoline odours on my 2011 Explorer and using this video solved my problem. Thank you
I followed your directions and used an Actron OBD diagnostic tool to reset the EVAP codes I just went to emissions and passed thanks for the online help really appreciated.
+Chris Loffredo Awesome!
I will admit that the capless filler neck is a great feature for putting more money into the pockets stealerships.
I agree. I have a 2010 f150 the the spring broke from the gas door and its about $500 to get a new one.
Ford Should Have A Option For A Gas Cap For Capless Filler...
@@gerryrig5012 I have a Ford locking cap available from them on my Flex. Keeps out dust and dirt and anyone looking to create mischief.
Its to prevent your hands from smelling like gasoline
Dude my 2009 ford explorer gas cap spring broke and it now pops out the wrong direction and i have no idea how to fix it
Another genius idea by Ford - I have wasted more time troubleshooting and fixing versus having a conventional gas cap.
I will do this because I just got the very same code but first the dash display showed "check fuel fill inlet" a few days prior. Then the check engine light came on for a few days,went off and now back on. Thanks for the video!
Thanks for the tip! 2011 Mercury Mariner. Fixed throwing the dash warning check fuel fill inlet and then check engine light on. Performed cleaning then reset by battery disconnect/reconnect.
Thank you for the video. If you don't have the emergency funnel, 1/2 inch plastic flexible electrical conduit works well too.
I have a 2010 Fusion SE V6 with about 80K miles. Thank you for posting this! I've had this problem for over a year and a half where the engine light goes on and off due to evap leak. Dealer told me to push the nozzle in and out 4-5 times before filling and again when done filling. He also said, once the tank clicks full, don't add any more gas. I'm going to try this out!
+scmasshole Check for trouble code p0457 or p0455 it is probably the vapor canister solenoid part #911-222. A local dealer in my area gave me the part number and told me how to put it in myself. The part in 2012 was about $60.00 I saved $200+ on labor. it took me about 30 minutes to put it in would have been less than 10 minutes, but I dropped one of the screws in my engine. If it is the SE V6 the part is on the top of the engine to the left of the battery. This worked for me I hope it works for you,
Mr. KING
Mr. KING gonna try this on wife's 10 se v6
Amazes me how many dumb people keep adding fuel after the pump clicks off. You just end up ruining your evap system by getting fuel in the charcoal canister or other components.
@@nodak81 Gracias por el consejo, soy parte de esos tontos!! que se dispara la bomba y sigue echando hasta que el combustible rebalsa jamás lo volveré hacer. adicional a eso, antes apareció el mensaje de la puerta del combustible en mi Ford Escape 2009 y hoy 21 de marzo de 2022 apareció el Check Engine revise con el scanner y la sorpresa un sin fin de errores relacionado con los gases de evaporación. revise y encontré una manguera rota. reparare la manguera, y hare lo que hace @fordTechMakuloco
I live up in Canada where there is a lot of dust,mud and snow in the winter so I bought a locking cap from my ford dealer that covers that filler entrance on my 2010 f150. It work very well.
So you bought a locking cap in don’t have any problem because I was thinking about buying one. Is it easy to take off
My 2011 Lincoln MKX coded P0456 (very small EVAP Leak) I followed your advice for cleaning no cap gas filler and cleared code. It has not returned. Thank you , this could have cost me alot to chase down at a repair shop.
Thanks for the tip. Had this problem on my 2010 fusion and had to take it to the dealer. The work order indicated that they had to clean debris from the cap less filler neck to resolve the issue. Thankfully it was covered under warranty.
Now you know how to do it yourself for when you are out of warranty.
Good tip, never thought about debris falling into the tank.
Thanks for the video, I just got the check fuel fill inlet warning on my dash on my 2010 f 150. I’ll give this a try
You are a good person for your helpful, honest videos.
Extremely helpful! Thank you for posting this video.
Mine has done this for several years. Sometimes just getting a message to check filler cap or the P0442 DTC. For a while, it was random and I would clean out the filler neck as you described. For the DTC, I would just clear it myself (i have a decent scan tool).But after a while, it got too persistent and the code would return within minutes. Ford has issued a recall on this where they will check the system and replace the Evap Canister if needed. They will also update the PCM software. Just got this done and the code has not returned.
Had the error come up yesterday for the first time 135k on the odo. Suspected something stuck the flap open just enough after refueling for a road trip. Got the fuel filler tube out and did the 30x insertions (more or less) and the indication didn't come back. Now, after having checked out this video, I can clean it up without taking it in to the dealer.
I have a 2013 mustang V6 I got this issue with the check engine light. The scanner was showing EVAP leak I kept on clearing the code then then recently the on-board computer showed to check fule cap. I guess this is the cause of it as I live in qatar and it's quite dusty over her and there is now self service filling. Thanks for the video 👏🏻
I had this issue on my 3.7L, 2017 T-250 at 702 miles...702. Thanks.
PS My T-250, 3.2L Never had any issues with the filler cap.
Diesel fuel is a good lube and Cleaner.
I had same problem with my 2010 Escape, turns out there is a rubber o-ring around the inside the metal flap/gate part inside that started breaking down. Was hell to get in there and replace it.
THANK YOU SO MUCH! Yoy saved me a lot of money!!
I have Ford fusion 2014 SE 2.5 with P260F code( engine light and other un related lights shows up on my dashboard). I did it and the code is gone and I passed the smog test! New CA law from July 1,2019, if any code related to fuel evaporation will FAIL the smog test! Make sure to scan your car before to take it to smog test!
I always enjoy the background music in your videos!
Super common problem with the 12th gen F150 as well.
Fortunately, I haven't had this problem. Thanks again for showing this. This is why I'm glad I found your channel and subscribed. I'll make this part of my maintenance routine. Joe D.
Sounds good to me, just getting the information out there.
I have a 2017 Fusion, and haven't had any problems yet, Thank God
Dude thanks! Just got a 2011 Lincoln MKZ and this code popped up. Gonna try your tips appreciate the information!
RE: 2010 Ford Escape. Full disclosure: My first impression of inserting the Fuel Fill Funnel multiple times seemed lame. I followed the instructions as demonstrated in your video yesterday. Today both the Fuel Inlet warning and Engine Check Light are off. THANK YOU VERY MUCH.
+Eric Bart Not lame these are real instructions from Ford and it works!
Yes, I agree. I was wrong in thinking it was lame. I quickly changed my mind because it did work. Again, Thank You for sharing these instructions.
You mean the fuel inlet and check lights got off. Ok, bad joke but, i am waiting for the day i might have to do this procedure because i have a 2014 Fusion. The first thing i thought of when i saw the capless fuel filler is dirt in the fuel tank and the little door sticking open.
Takes the expression "Splash and dash" to a whole new level. I just got 2019 Ford Tourneo and it has one of these filler systems. What makes me laugh is the lack of security as the flap is not lockable.
Stant makes a locking insert for that filler system I have one on my Escape .
Thank you, Thank you Thank you! My Ford Flex cap got stuck today. Your video helped me figure out how to fix it. I'll be calling the dealership on Monday and the gas funnel is going to stay in a quick access location for now.
Any gas fumes smell in the car?
Thanks for all of the videos. It really is a great service!!!
My coworker just got stuck at a gas station because of the " Easy Fuel" the pump nozzle was just a little bit too small to catch the releases on both sides. this is on a brand new ford fiesta! call me old fashion but I'll stick with the ancient twist cap. Nice video by the way. thanks!
"nozzle was just a little bit too small to catch the releases" what releases are you talking about?
I love the capless filler. As with any new innovation Ford will get it figured out. Mine is a 2012 and the problem just started. Im happy if that is all it is.
That is why the funnel under the seat
Same issue with the newer capless design. I have a 2013 Edge and it's been giving us some issues for some time now. The check engine light has been coming on with the fuel code and noticed that engine starts odd just after fueling. We will use this method to remove debris and plan to invest in a locking cap. Sadly this probably won't be recalled because it is not technically a "safety" issue.
Might want to check the PURGE VALVE REPLACEMENT videos
Fords are such an over designed under executed junk wagons you need to be a mechanic to keep them running
Have a 2012 Mustang and had to do this. Ford dropped the ball on the Ez fill design, but thank you for this video! The engine light scared the crap out of me haha
i have a 2011 lincoln mkx with that type of fuel cap. when i first saw it, i thought, cool, as time went on, i was like, hmmmm, that thing doesnt seem like it will seal forever and will cost me fortune to fix. going to follow your tips, clean it right out regularly and hope my pos doesnt fook up.
Lol, way to go Ford. You solved a problem no one had. I have this on my escape and just want a cap
Thanks for posting this. I'm having this same problem with my 2011 Fusion. I'll give this a try and see how it works.
bgh70 did it solve your problem?
Did it work ?
Did it work when you cleaned your tank
My 09' Lincoln MKS had the check engine light that has to do with this fuel filler neck message appeared on dashboard. Lincoln Dealer tried to rip me off with $500 charge on the replacement of fuel pipe neck part without discussing the cost ahead of time. I told them to put the old part back in and follow the instruction of this video. So far my car has no check engine light appear since 2 weeks after I erased the code. Also, I took it to inspection and it passed without any issue. Again, thanks for this wonderful tip. Any Ford or Lincoln owners should follow this guide before wasting money for dealership service.
Well that is good then glad it worked!
never any any issues with the capless system on 5 newer Ford/Lincolns myself & family bought since '12. Love the system ..no gas mess!
Whats so messy about removing and tightening a gas cap? Been doing it for the last 6 years ive been driving, haven't spilled gas on the truck yet...then again I wait till the gas stops flowing before I pull out the nozzle.
Thank you for taking the time to make this video. I have a follow up questions, I saw your video in regards to a P0456. As indicated in that video, I tested and replace the piece. I also followed the directions indicated here. I just found out that there's a locking cap (Part # 31859) and would like to know if it will help with any future issues or would it make it worse.
That’s what I will be testing out soon will keep you posted. I have the same code popping out for the second time now since buying my Ford Flex about 3 weeks ago. I did this and pumped gas and it cleared up the check engine light immediately after filling up but the light came back on yesterday.
the emission,evap,check engine symbol came up 2015 ford and i sprayed wd40 on fuel flapper like in video, it went off. thx
FordTechMakuloco, thanks for all the tips. I have a 2011 F150 5.0L.
Thanks for the video! I was able to fix my 2013 F-150 using this trick. Much appreciated! Saved me some $$$. Love the music in the background too. God bless!
What code did you have? I have P0451-going to try this tomorrow.
Do you have a video on how to replace this?
My 2010 Ford Escape started showing Check Fuel Inlet then quickly changed to check engine light it was due for Inspection and Emission took it in to my garage who I love they cleaned it all out it passed Inspection and Emissions then 1 week later CHECK ENGINE LIGHT again so I started doing a little research and found out that this has been an ongoing problem with many many Ford owners. I found this video on You Tube which seems to be a simple solution Im going to try it then get a gas cap to keep it sealed. I will post again to let you know if it worked.
Sue Martin I just had the exact same thing happen to me today. My check fuel inlet came on, followed by the check engine light on. How have things turned out since getting a gas cap?
Sue Martin I think you forgot
Thanks for the vid. I follow your instructions and the light went off. Hopefully it will stay that way.
Thanks for this vid I was having issues filling up my 2021 ranger and it seemed to have fixed the issue
That's probably why my engine light was coming on in my 2010 fusion.
Do you have a video on replacing a cap less filler neck on a 2010 explorer or like wise vehicle? +FordTechMakuloco
my guess as to the reason for these gas caps is to not release gasoline vapors into the air. When a regular cap is opened, and you look at it from the side, you can see the vapors escaping. It is easier seen on slightly older cars without the little flapper valve.
I remember back in the 70's, a large contributor to smog were these escaped gasses. On the engines in the sixties, there was the oil tube that stuck up from the engine that was covered by a push on cap. In the 70's PCV systems were developed to reduce the escaping vapors that were in the crankcase.
btw - screw caps do go bad as well. They need to be replaced at around $10-15 each. With the new design, you get to do some in & out for free!!
2011 Raptor has been doing this. Thanks for the video!
Giggity
+William Kibler Yeah Yeah I know...
Aka stupidity
Haha didn't have to scroll far to find the comment I was assuming would be here🤣
Try to do it when gas level is low just in case of contamination
Nice one!!! Thank you for that!!! I have a Ford Fusion 2012 SE. There's some smell into the cabin specially when I have half a tank or more, and it makes me seriously sick. I took for a full check, and they said "nothing wrong". Any shot?
Wow, so much hate here for a great feature. After you have it for a while, you begin to appreciate it. Prevents some scratches from the lid hanging, makes fill up easier, and no chance of forgetting to lock the cap.
Thanks for posting this vid, never had an issue yet on our 11 Fusion with 66k miles now, but will keep it in mind. Also, have you heard of anyone swapping this into an older car? Not going out of my way to do it anytime soon, but may try if I need to do a fuel system repair.
Derrick Davis t
They sell aftermarket locks that can be placed over the capless system, I used to sell them for about $8-$10 mostly for people who are concerned about vandalism but they’ll definitely keep dirt and road grime out.
Sir what's the website or where do they sell them i hate this new capless bullshot
Clutch3Pointer I used to work at O’Reilly Auto, I sold one to a lady who purchased a Ford Focus with “capless”. She thought her cap was missing. After I explained to her that it was a capless system she said she still wasn’t comfortable with it being open so I sold her a lock specifically designed for her model. They don’t twist on, you just stick it on and there’s a little tab that will hold on there. It comes with two keys so you can lock it if you want to. Most auto parts retailers should carry them but I sold one from O’Reilly..
Clutch3Pointer Have them look it up for your car's make and model.. Could save a service trip to the dealership.
I'd just like to add that I dealt with this issue several times on my 2011 Escape. I was curious if putting an aftermarket locking gas cap would at least make it less frequent. About 18 months ago I purchased one, and I have not had another check engine light since.
Can you share a link to the one you purchased? I need one for the same issue
@@mizzjonezz unfortunately, TH-cam disabled link sharing in the comments. I can give you the part number though. It is a Stant 10524, and I got it on Amazon.
Thanks so much. Will try to get as much info as possible.
Changed my 2013 Fusion SE catalytic converter in March and then this started happening. Cleared it following your instructions, minus the compressed air, and it just came back on. Will try golpe said instructions to the T and clear the codes and see what happens
Never knew that little door required some maintenance, on our '08 mercury mountaineer it has the bowl style and the last fuel filter was extra dark so this makes a lot more sense, definitely will do the compressed air and wd40 trick in an hour or two. I assume wd40 three way oil and grease specialist will work the same?
Omg, I just bought a '10 f-150, I saw that funnel sitting under the back seat and was wondering what it was for! S.m.h
same here
For a hundred plus years the filler cap work, but wait...ford has an idea. Why you ask? Because some ford engineer fresh out of school wanted to have a hand in the design and this was his contribution.
seems to be the truth anymore...smh
This worked like a charm. Thank you so much.
A little trick I have found for my 2010 escape I have found that if I told up a shop rag and tuck it into the small bowl area keeping the corners of the rag away from the flap it keeps the trash from clogging up the flap it works for me so hopefully it might help someone else with this problem as well
Thanks for this video. We have a 2013 Fusion titanium and we started having problems with the check engine light after a fill up in New Jersey (no self-service). Now we have the llight on again and the filler "burps" or "farts" after filling, and the first engine start after a fill takes 5 - 6 seconds of depressing the Start Engine button to get it running. Any suggestions?
Michael D Kernan Evap Canister or Evap Purge Valve Solenoid.
Michael D Kernan do you get issue resolved. We had those exact same issues but now it takes us 5 to 6 starts to get the car started
Do NOT overfill the fuel tank. When the auto. nozzle clicks off, do not top off the tank with more fuel. You are flooding the charcoal cannister...making the mixture waaay too rich during start-up while purging the fuel tank of vapor..
Louis Healan I think this is happening to me. I tried to put gas in my car one day and the pump kept stopping at $13, but i wasn’t full. So i kept trying and it kept stopping. So i just went to leave, but the car wouldn’t start at first (i have push to start). Now my car is making the “farting” sound and my engine light came on- but the mechanic reset it Bc he didn’t see any problem. The sound is back today. What do I do??
Ashlee Jeter In the past, my experience has been the charcoal cannister might be ruined by have liquid, not vaporized, gasoline destroy the charcoal inside the cannister. Once I had to remove the spark plugs and dry them off...they SHOULD have been replaced since they were dripping wet with gasoline. After that the car started and ran fine.
They sell a cap you can always put on there if it wont be fixed.
To people who say capless sucks, I've owned cars where the cap system itself wont seal right, and you need to get another one. So really theirs no winning.
Yes I link to the dust cap in the video description.
How much is a cap compare to fixing the capless system and u will understand the difference.
I paid $7 for a new gas cap. That's a win for me.
This video saved my life, thank you.
I have a 2020 Escape with less than 11,000 miles. My check engine lite came on for that exact problem. Thing is it's clean around the filler.
I hate the capless setup.
klong1972. You can buy a cap with key lock
klong1972
I love it had it on my 11,12,14 never ever had any issues
Ivan Ibarra doesn’t have a seal so it doesn’t solve the problem.
Buy a fuel plug lock in Amazon. They are about $25 or so.
Dont fix it if it is not broken. Aka the gas cap does its job perfectly.
Robert Phillips until you need to go get emission test
I had a gas cap sealing issue that was solved by buying a new gas cap. Easy peazy. I'm just waiting for my Fusion to have an issue.
@@BossSpringsteen69 Do yourself a favor and buy the locking cap for the ez-fill fuel system off amazon. I did that after having an issue on my 09, should help keep crap out of the filler neck.
And, after getting 1/2 tank of gas stolen, I went and bought a locking gas cap for my 2017 Ford Explorer XLT....
Michele0403
3 years ago
The car comes with a special funnel, in case you have to fill with a gas can. If the bad guys have that funnel, then they could get the gas out too. I filled up the tank the night before FULL. The next day, I get ready to take my road trip, and the tank is half empty. Also, every time I get gas, I reset the "trip", so it's at zero, so if anyone drove the car, it would have a reading, other than zero. How would YOU explain the missing half tank of gas? Nobody else has access to my keys.
My 2013 5.0 mustang has this problem too, I'm going to try this out and see if it helps. P0455 code evap leak
Wow we have been having so much trouble with that dumb light and were about to spend money to get it smoke tested and some other stuff. Thanks to my husband who found this video well we will see how well it works. Thanks God Bless you!
Dina Mali It's either this or the canister purge valve yes very simple and most of the time smoke test wont show, I don't even do them anymore.