Replacement Exhaust Fiat Punto 1.2 8v 60hp DIY (Výměna výfuku)
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- How to change and repair exhaust on Fiat Punto 1.2 8v MK2 middle pipe part and rear silencer part
Jak vyměnit rozbitý, upadlý výfuk na Fiat Punto 1999-2010 střední trubka a zadní tlumič
looks like both studs snapped coz u didnt use any penetrating spray or heated them up
Thanks mate!
Did you also use a metal ring gasket between the cat and flexible piece flange? Or only the flat flange shaped gasket?
it's been a long time. I do not remember what kind of gasket it was. I think metal ring, even on the video can be seen it was metal maybe.
I only see the flat flange shaped one at 2:25 so I guess you've only used that one. Thanks!
The 1.2 16v uses the metal ring between cat downpipe and flexi pipe :)
Did you drill the area where the rusty screws come or did they get out slightly?
I had to cut off the rest of the bolts!
Then the rest of the old screws came out, or they got stuck, did you had to drill new hole on screw area? Sorry for my bad english.
The screws broke and then I had to cut off the rest of the bolts. I do not remember if I had to drill. My English is also not good
Ok, thank you for informations. Tomorrow i wil try to replace my punto`s exhaust too.
Update! Yesterday finally I changed the exhaust, the steps are the same as those in this video, but I have to say that the old broken screws didn`t come out, need to be drilled exactly through the center of the old screws to make the hole for the new screws, and it's not easy because the old screws are made of a hard material but patiently you will succeed, it is important to give the hole exactly through the center of the old screws.
P.S. My english is not good, but I hope you understand what I wrote.
Ahoj, když mi upadl výfuk z těch gum, na kterých to drží, tak je stačí vyměnit a bude to OK? Mám silnější verzi tohodle Fiata, takže má i střední část s tlumičem. Ta zadní guma je ta široká a ty zbylý dvě gumy jsou obě stejný? Ptám se, abych kdyžtak objednal rovnou všechny ty gumy. Nebo se to řeší tak, že mám koupit rovnou celej novej výfuk?
Ahoj určitě stačí koupit jen gumy co máš prasklý, už je to delší dobu tak nevím jak je to s těma velikostma. Nový výfuk bych měnil až když ti ten starý bude dělat nějaký divný zvuk nebo urezne nějaká část :-)
Tak jo, tak já objednám jen ty gumičky. Prej nebyly vyztužený jako ty originální, tak proto se protrhly.
Name of the paste used please
Exhaust sealant paste
Great!
hello mate, could you please tell me the diameter of flex pipe ? because i want to change it for my punto 1.2 8v
Sorry I can't measure it. Part number of the middle exhaust is Bosal 956-101. You can try to find the dimension by part