The tutorial is well explained. Can you please do a tutorial where you can make full connection from the gen controller and the entire circuit step by step with all components involved in the circuit.
Thank you! Your suggestion greatly considered. Blurry TH-cam videos are often the result of a slow internet connection, You might have internet connection problem other wise we always try to post our videos in HD, any way we noted your suggestions Thank you for letting me know.
If your Genset controller is functioning well, it should tells you why your Generator's engine stops otherwise there are many reasons to stop the engine such as a faulty relay , a faulty injection pump solenoid, engine high temperature and 12 volt power interruption in controll modules, all the sensors feeds from Genset controller any power interruption causes engine shutdown.
Check your battery voltage make sure it is fully charged otherwise you have problem either with starter motors solenoid or relay please click on this link watch this video it could solve your problems. th-cam.com/video/W8UOMo2-gVE/w-d-xo.htmlsi=nSVv097Oid6tu8Uj
th-cam.com/video/-mFO2LvLQV0/w-d-xo.htmlsi=rWBIPoCYtqnI5xo3
good work sir and i hope to see more trubleshoot
Thank you
Will catch you with a new video.
th-cam.com/video/-mFO2LvLQV0/w-d-xo.htmlsi=rWBIPoCYtqnI5xo3
Well done sir, nice diagnostic procedure
It's my pleasure
The tutorial is well explained.
Can you please do a tutorial where you can make full connection from the gen controller and the entire circuit step by step with all components involved in the circuit.
Thank you for your enquiry !
Will try with another video.
Love this tutorial you teach very briefly ❤
Glad it was helpful!
Thank you for your indept explanation , it is very informative
You are welcome!
Very interesting, i wish if you can help me to do the connection of socket next time.
Thank you
Will try to have a new video recording how to replace the connectors and the wires.
❤ I love that toturial.
Thank you
Am happy with ure info please try to zoom in the cameras so we can have I clear view.
Thank you!
Your suggestion greatly considered.
Blurry TH-cam videos are often the result of a slow internet connection,
You might have internet connection problem other wise we always try to post our videos in HD, any way we noted your suggestions
Thank you for letting me know.
Dear, Sir pls make another playlist where u Only upload generator trouble shooting & it remedy.
th-cam.com/play/PL9emt8gEX58TzK4hH1VPTD9oyFoMaumEr.html&si=WSRDG6wCnrdJPOHl
Tnx
Good work sir, but how to troubleshoot a generator that stops after running for some munities after stare
If your Genset controller is functioning well, it should tells you why your Generator's engine stops otherwise there are many reasons to stop the engine such as a faulty relay , a faulty injection pump solenoid, engine high temperature and 12 volt power interruption in controll modules, all the sensors feeds from Genset controller any power interruption causes engine shutdown.
more video this topic bro
Sure 👍
please adding schematic diagram &wiring
This model same generator starting very well and after 1 minute automatically shutdown.
Please check the event's log and tell me what ever the genset controller has been detected.
Why rpm for 4pole genset is 1678 and not 1500
4 pole 230 V 50 Hz. RPM 1500
4 pole 120/110 V 60 Hz. RPM 1800
Run the genset check the frequency and correct the RPM.
thanks alot
My problem for genset is not cranking sir
Check your battery voltage make sure it is fully charged otherwise you have problem either with starter motors solenoid or relay please click on this link watch this video it could solve your problems.
th-cam.com/video/W8UOMo2-gVE/w-d-xo.htmlsi=nSVv097Oid6tu8Uj
thanks support
My pleasure
hindi
The wires are to trash
Thank you for your consideration
This is a 12 years old generator the previous service providers screws up everything
We have been trying to fix them.