this type of boat has been around for over 30 years. they are incredible. much stronger than you might think, lighter than glass and will not only float but repairs are simply a case of hot air gun and a bit of plastic.... no need for any wood other than a nice transom board you can simply slot in and replace whenever you want.. brilliant idea and can be made from scrap plastic,,, no more rotten fibreglass , this stuff is simple to re-use...... if you think they are weak then try bashing them with a hammer. then youl get a shock how tuff they are.... 4 metre is the good size, lets you chuck a 70hp on the back
these boats are made about 5 miles form where i live in Bundaberg Queensland Australia. if ya like rum we make that to the famous aussie spirit Bundaberg rum.
Yes. We have done lots of research on these molded plastic boats as a tender and they have so many advantages over a RIB. They seem best impossible to puncture, and have virtually no maintenance on the hull (other than bottom growth), while having more room and stability than a rib.
Great vid Guys, we use the tuffy flat out here in Western Australia, got some very decent vids of it in the rough water, very safe and stable boats. Take care
* that* is what also you do on car's plastic bumpers and grilles,that used to be black,and they are now grey,baked by the sun; a light and sweeping touch of heat from a heat gun, brings back the black color like magic; actually hard to believe for someone who is looking at it being done,they at first ask if that's a trick and you have some sort of new spray gun in your hand, so amazing it is lol
I’ve really taken a shining to these poly boats. Regardless if it’s it’s polycraft, whaley, ect. But, I live on the lower Columbia River. It can be glass and as soon as the tide snaps, off shore wind picks up and creates 3-5ft white caps with a rippin tide. My next concerned is if those one piece bows can handle a deployed anchor with 60-150ft of line without tearing out. That’s a shit ton of tension.
I wonder how many people were suckered into buying the giant tub toy? I can see it now. Some moron sanding a hole right through it trying to remove scratches 🤣🤣🤣
i have a Jeep with plastic fenders the sanding / heat gun works for a while but over time the sun will bleach it out - the heat gun pulls the oils to the surface but they fade faster over time Looks great now - in a year will look like Grandmas quilt
Yep $3000 for the hull only . You will need to purchase the rest of the equipment separately. So total price will be around $6000 because only the engine will be like $2000 plus trailer ... hell nahhh with $6000 dollars I can buy something bigger with engine included at Craigslist.
For a Yamaha 15hp 4 stroke, closer to $4000. New aluminum trailer around $2000 after tax. Trolling motor $400, decent fish finder $400, batteries $200, you’re over 10 grand for a 10 foot boat. No way.
I have to see that dingy on Hallover I hope hes has life insurance. Those boats would sell good here on the lakes.for under the bridge fishing. That heat restoration was sick!
I own one of those polys go out in it lots put in bilge pump and a 1/2. “ marine ply floor and carpet great safe boat go out on some rough water but hull over this lve got to see good luck from Australia
I have one with a 15hp mercury on it ,I agree with you great boat, it will eat that haulover while everyone else is to scared to have a go in their big boats, but give the little poly a chance and wait till it gets real rough it will be a walk in the park for it while the big boats wouldn't be game to even attempt it, they are great boats
There's thousands of different kinds of boats in the world at every price range. People buy polyethylene boats for specific reasons like durability and low maintenance. You can't compare it to other types of hulls or used boats.
You can't get shit for $6000 unless it's well used. There's nothing wrong with buying used but you'd better be damn sure of what you're getting for your money.
I had the 5.99 Polycraft in centre console with a 175 hp Suzuki 4 stroke on the back, load/unload single handed, tougher than an alloy boat and rides like a ‘glass boat. Saddest day was when I sold her...
I’ld buy their 450 in a heartbeat should they come to Ontario. Most versatile boat for Great Lakes and small. There is one thing that puzzles me: Since they claim these boats are virtually indestructible, than why Polycraft offers only 4 year warranty on their hulls? Please, if some one have explanation do share. There is something that prevents Polycraft from being more generous with that warranty. What is it? Something cosmetic or structural. Thank you.
I’ve had my polyethylene kayak for like ten+ years lol...as long as you don’t store it in direct sun...you’ll be just fine...who cares if the color fades a lil
@@tishbrett I would definitely get one...but having to get a custom trailer, and after buying the fifteen hp, you can find a decent boat for that price with a a trailer, more length, and hp...tuffys’ are amazing though
If he had sanded with progressively finer grades down to maybe 1500 - 3000 and then use the heat gun, the repair would likely be invisible. You can still see the repaired areas in the demo.
These poly boats are indestructible. TH-cam ‘polycraft’ and watch videos where they drop them form cranes and ram them with utes and they simply bounce back.
I get it, but these are nothing more than a Whaley boat from the Netherlands. They may be well built, but they have a limited capacity and really should only be used in calmer seas if your going to fish from them. The other issue is you have to buy everything (motor included) to be able to get it up and running. With what Sea-Doo is doing with their Fish Pro and others who are modifying their skis as fishing vessels, it just makes more sense to spend a few extra G’s and go that route. At least it would be quicker and your range would be much farther. Maintenance I agree would be lower in the long run, but overall, a real boat or a PWC would be the better option. I looked into the Whaley boat a couple years ago, and I really had to think about what I was going to use it for. If I did get it, would it excite me every time. The answer is no. In the end I just could see me using it as often as a quicker motorized craft. I see value in it, but not for me.
@@lestertunigold403 they are a real boat and will go and do the same as any boat the same size from 15-20ft is you standard offshore rig under15ft is mostly island or river boats and these boat are near indestructible
We sell Whaly boats and Polycraft boats. Both incredible brands. Not every boat is for everyone. People who buy this boat have a specific purpose and use them for fishing their local waters or as tenders for their larger vessels. Can't compare to PWC. Plus have you ever spent 3+ hours on a PWC? Not that comfortable at all.
If the hardware like rod and reels are name brands and the electronics as the same brand new name brand I might give 3 grands but I'd preferred it to be at least 16ft
A single 20 and it wouldn't stand a chance against the 3m polycraft, had a 20horse on it back to a 15hp mercury with a se sport 200 cav plate now and it's way good enough
Just bounces off ,leaves a scratch, otherwise just lift your motor and drag it across done it heaps of times in 14yrs of owning mine, piece of cake to unload of the trailer lift the motor push it off the trailer onto it's arse let it hit the ground then drag it down to the water, they are tough
Find a plastic welder, the same as you do when you crack any other boat. you find someone who can repair it. And a lot easier to repair. Let me see you crack one of these hulls. Good luck.
3000$ for the shell, more 3k$ for the absolut need accessories, double of all that for the engine, and you get to the price of a williams yacht tender lol
Couldn't you just put some type of stick on skid material to avoid any real kind of damage to the boat's finish like all contact points on the boat itself ?
My $3000 boat is a 16' Lund with a 40hp motor. This....??? I dunno. I DO like that it is a sandwich construction. Basically unswampable, but still capsizable.
Look into the Whaly 210 it’s only 6 ft but it can fit in a pickup so no need for a trailer and it’s a lot lighter $1500 is half the cost there’s always cheaper options this really isn’t that affordable when you factor in a trailer and a motor nice vid tho they are cool boats scratch it just put a heat gun on it and it’s fixed lol
They want 52k+ for a 599 + Yamaha 150hp plus a 1-year wait + shipping LMAO!!! Bruh they are bananas .. They better step their game up and ship over some molds and print these jokers out here in America great idea but absolutely crazy pricing and wait time.
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
King of Haulover invaded polycraft boom 😎
Can't wait to see that
Good luck ... wear your EPIRB.
If they can handle what Aussies put them through they will eat haulover for breakfast lol
Your mission if you choose to accept it is.... Beat 16 foot Boston Whaler man.
Make sure your life insurance and will are in order first.
Red Top Legend would be proud.
this type of boat has been around for over 30 years. they are incredible. much stronger than you might think, lighter than glass and will not only float but repairs are simply a case of hot air gun and a bit of plastic.... no need for any wood other than a nice transom board you can simply slot in and replace whenever you want.. brilliant idea and can be made from scrap plastic,,, no more rotten fibreglass , this stuff is simple to re-use...... if you think they are weak then try bashing them with a hammer. then youl get a shock how tuff they are.... 4 metre is the good size, lets you chuck a 70hp on the back
I'm happy Australia has finally exported that interesting little boat
You really need a damn Rode mic for your channel so we can hear the other people speak.
these boats are made about 5 miles form where i live in Bundaberg Queensland Australia. if ya like rum we make that to the famous aussie spirit Bundaberg rum.
When the 3m Polycraft was released the Australian Army dropped them from helicopters onto a football field...they bounced...hope you enjoy them.
is there a youtube video of the Drop?
Is there an Australian army 🥸
One of those would make a heck of a good tender for a bigger boat.
Thats actually what they are, tuffy tenders!
I've seen guys fishing offshore in these!
I would go inter Island with that here In Hawaii 🤙🏽😁
Yes. We have done lots of research on these molded plastic boats as a tender and they have so many advantages over a RIB. They seem best impossible to puncture, and have virtually no maintenance on the hull (other than bottom growth), while having more room and stability than a rib.
I have a poly boat for my surf boat and I have to say they is no maintenance and they don't sink. I love mine.
Great vid Guys, we use the tuffy flat out here in Western Australia, got some very decent vids of it in the rough water, very safe and stable boats. Take care
Opa! What's up, love your videos! Hope to see some more Tuffy footage soon!
* that* is what also you do on car's plastic bumpers and grilles,that used to be black,and they are now grey,baked by the sun;
a light and sweeping touch of heat from a heat gun, brings back the black color like magic;
actually hard to believe for someone who is looking at it being done,they at first ask if that's a trick and you have some sort of new spray gun in your hand, so amazing it is lol
I'm definitely gonna watch haulover
Looking forward to the Haulover trip! Good vid!
I've been looking at these boats for a while. Finally they came to the states! I wish the company had more videos of the drifter 4.5..
go to the second hand market if you have only 3 thousand to spend you could get a 5.5m rib with 90hp for the same price as this bathtoy
I’ve really taken a shining to these poly boats. Regardless if it’s it’s polycraft, whaley, ect. But, I live on the lower Columbia River. It can be glass and as soon as the tide snaps, off shore wind picks up and creates 3-5ft white caps with a rippin tide. My next concerned is if those one piece bows can handle a deployed anchor with 60-150ft of line without tearing out. That’s a shit ton of tension.
Nothing says “Florida man” like riding a piece of molded plastic with an outboard on the back out of Haulover.
I wonder how many people were suckered into buying the giant tub toy?
I can see it now. Some moron sanding a hole right through it trying to remove scratches 🤣🤣🤣
Just get drunk and carry a gator with you.
@@llshamelessll I'm in Louisiana if had a dollar for using drunk boat and gators in the same sentence I would be a millionaire
@@ronaldharris6569 LoL .....hold my beer!
I have a tuffy in OZ, you will need to pry it out of my dying hands!
i have a Jeep with plastic fenders the sanding / heat gun works for a while but over time the sun will bleach it out - the heat gun pulls the oils to the surface but they fade faster over time Looks great now - in a year will look like Grandmas quilt
These people make rain water tanks that still look good after 30yrs in the Australian sun
Oh, Look! snacks!!! in a green plastic bowl... As Fred laughs in Crocodile.
Finally something I can afford 👍👍
Yep $3000 for the hull only . You will need to purchase the rest of the equipment separately. So total price will be around $6000 because only the engine will be like $2000 plus trailer ... hell nahhh with $6000 dollars I can buy something bigger with engine included at Craigslist.
For a Yamaha 15hp 4 stroke, closer to $4000. New aluminum trailer around $2000 after tax. Trolling motor $400, decent fish finder $400, batteries $200, you’re over 10 grand for a 10 foot boat. No way.
Great demo great boat, glad we can get them here in the states.
I have to see that dingy on Hallover I hope hes has life insurance. Those boats would sell good here on the lakes.for under the bridge fishing. That heat restoration was sick!
Very nice can't wait to see it on the water
that was an interesting and fun review!
thanks!
👍
I own one of those polys go out in it lots put in bilge pump and a 1/2. “ marine ply floor and carpet great safe boat go out on some rough water but hull over this lve got to see good luck from Australia
I have one with a 15hp mercury on it ,I agree with you great boat, it will eat that haulover while everyone else is to scared to have a go in their big boats, but give the little poly a chance and wait till it gets real rough it will be a walk in the park for it while the big boats wouldn't be game to even attempt it, they are great boats
Warranty on my springbot was 50 years no leaks and still going
Famous last words going through Haulover..... “Watch this!” I want to seem them for through it on a Weekend with some big rollers!
A few other reviews show that the storage lockers are NOT water tight. I don’t know why they would claim this.
Really cool inexpensive fishing boats thanks for the review.
Meeehhh i would no be a buyer for this, for 5 to 6 k you can get a decent boat with motor aaaand trailer. 👌👌👌👌👌👌
Exactly
There's thousands of different kinds of boats in the world at every price range. People buy polyethylene boats for specific reasons like durability and low maintenance. You can't compare it to other types of hulls or used boats.
If somebody doesn't know anything about boats, or a good mechanic they trust to inspect it and not lie...they will b throwing away 5k
Which boat is that?
You can't get shit for $6000 unless it's well used. There's nothing wrong with buying used but you'd better be damn sure of what you're getting for your money.
Pretty soon you have a boat with really super thin plastic after a few repairs. Good thing it won't sink.
I had the 5.99 Polycraft in centre console with a 175 hp Suzuki 4 stroke on the back, load/unload single handed, tougher than an alloy boat and rides like a ‘glass boat. Saddest day was when I sold her...
You should do a walk through of those blue wave boats that are beside the poly craft.
I had one of these when I was a kid. It was a tug boat yellow and red
Logic and Triumph boats were roto- molded and they went away. I like the durability of they boats.
Had a logic 13 ft it was a great boat
'Yeah. That's a no from me dawg'
- Randy Jackson
You gotta post this boat going out of Haulover.
When will the Haulover video launch?
Love a good bot that needs maintenance first time a branch touches it. Hope haulover is safe and flat when that happens
These boats are tuff as only yuppies take out scratch’s and it will eat haulover
Perfect for little bass ponds.
Go Australia!!! Love the USA.
The ride is butter smooth.
Whats the wall thickness
I’ld buy their 450 in a heartbeat should they come to Ontario. Most versatile boat for Great Lakes and small. There is one thing that puzzles me: Since they claim these boats are virtually indestructible, than why Polycraft offers only 4 year warranty on their hulls? Please, if some one have explanation do share. There is something that prevents Polycraft from being more generous with that warranty. What is it? Something cosmetic or structural. Thank you.
Reminds me of my Dory skiff 🎣🎣🎣
Alfred. Ken from New York. Your reports are as big as the Empire State Building. 😎
Stay tuned the best stuff is yet to come
This would make a great duck boat. Fit in the back of a pickup bed?
Problem with solid plastic boats, is sun decay. I really doubt these are any different then others.
There's some uv resistant acrylic sprays that could help
I’ve had my polyethylene kayak for like ten+ years lol...as long as you don’t store it in direct sun...you’ll be just fine...who cares if the color fades a lil
Same company make rain tanks still good after 30yrs
@@tishbrett I would definitely get one...but having to get a custom trailer, and after buying the fifteen hp, you can find a decent boat for that price with a a trailer, more length, and hp...tuffys’ are amazing though
These boats are made with a special UV protector that prevents it from fading in the sun.
It’s an oversized igloo cooler with a motor on it
🤣🤣🤣
I GOTTA SEE THIS IN THE HAULOVER
Not a problem
Thats a bass killer right there
Haulover will win!
Thanks
If he had sanded with progressively finer grades down to maybe 1500 - 3000 and then use the heat gun, the repair would likely be invisible. You can still see the repaired areas in the demo.
We do recommend going down to 1000 grit. This was done quick just for the interest of time. But if you do it right, it comes out like brand new.
@@polyboats879 when are you going to name your california dealer?
These poly boats are indestructible. TH-cam ‘polycraft’ and watch videos where they drop them form cranes and ram them with utes and they simply bounce back.
Your better off buying a used 16 or 17' boat by the time you add up the motor and trailer ??
Thats what I was thinking. Not enough weight capacity
Those boats look nice
nice but a chunk a of change by the time you rig it out for such a small boat
That's awesome!!!!
$3000 really high price for a chunck of plastic. I maybe pay 1,000 at most. It's plastic.
Why don’t you make one with same quality and features and price it at $1,500 and I’ll buy 20 from you.
@@tamalpias yeah at a grand put me down for 3 of them..
Reminds me of bass buster boats
make a camouflage version and im in!
We sold a camo version that was at the FLL Boat Show this year,
@@polyboats879 well look 👀 @ that 🙌🏾👌🏾👍🏾
So the boat can be hidden in the woods?
@@sparkeyjones6261 no to sneak up on the fish without being seen ofcoarse!
You never have seen a boat hidden in the woods. Camo works!
You might as well buy a PWC. Faster, more fun and cost will be pretty close to equal. Great for small lakes, but not the ocean.
The small one mostly get used as tenders but the bigger ones go 30-40 nml out to the shelf all the time
I get it, but these are nothing more than a Whaley boat from the Netherlands. They may be well built, but they have a limited capacity and really should only be used in calmer seas if your going to fish from them. The other issue is you have to buy everything (motor included) to be able to get it up and running. With what Sea-Doo is doing with their Fish Pro and others who are modifying their skis as fishing vessels, it just makes more sense to spend a few extra G’s and go that route. At least it would be quicker and your range would be much farther. Maintenance I agree would be lower in the long run, but overall, a real boat or a PWC would be the better option. I looked into the Whaley boat a couple years ago, and I really had to think about what I was going to use it for. If I did get it, would it excite me every time. The answer is no. In the end I just could see me using it as often as a quicker motorized craft. I see value in it, but not for me.
@@lestertunigold403 they are a real boat and will go and do the same as any boat the same size from 15-20ft is you standard offshore rig under15ft is mostly island or river boats and these boat are near indestructible
We sell Whaly boats and Polycraft boats. Both incredible brands. Not every boat is for everyone. People who buy this boat have a specific purpose and use them for fishing their local waters or as tenders for their larger vessels. Can't compare to PWC. Plus have you ever spent 3+ hours on a PWC? Not that comfortable at all.
$3000 for plastic crazy.
Boats are expensive.
@@ronaldharris6569 just get a Jon boat
I got a great 175 pro tracker 2003 for 3k , had it for 6yrs ,,, the cooler I put my beers in is bigger than that boat
They finally made it to the US.
Two foot-itis is going to come on faster than covid with this thing.
Power to weight ratio should be great
If the hardware like rod and reels are name brands and the electronics as the same brand new name brand I might give 3 grands but I'd preferred it to be at least 16ft
be really nice to hear what the rep is saying.
Haulover doesn’t stand a chance. I’d slap quad yama’s 15 on that bad boy
A single 20 and it wouldn't stand a chance against the 3m polycraft, had a 20horse on it back to a 15hp mercury with a se sport 200 cav plate now and it's way good enough
I wonder if it's rock sea proof
Just bounces off ,leaves a scratch, otherwise just lift your motor and drag it across done it heaps of times in 14yrs of owning mine, piece of cake to unload of the trailer lift the motor push it off the trailer onto it's arse let it hit the ground then drag it down to the water, they are tough
@@lyallfisher9867 nice! the price is decent to. Thanks you! .
If you crack the Hull how do you repair it. Glass won't stick , plastic has to melted on No glue etc.
Find a plastic welder, the same as you do when you crack any other boat. you find someone who can repair it. And a lot easier to repair. Let me see you crack one of these hulls. Good luck.
How about between an 18 and a 22-foot
Looks amazing to get away, run out from cubazuela
3000$ for the shell, more 3k$ for the absolut need accessories, double of all that for the engine, and you get to the price of a williams yacht tender lol
Couldn't you just put some type of stick on skid material to avoid any real kind of damage to the boat's finish like all contact points on the boat itself ?
I'm sure you can put on a rub rail
Good Aussie made boats they make them in bigger size too
My $3000 boat is a 16' Lund with a 40hp motor. This....??? I dunno.
I DO like that it is a sandwich construction. Basically unswampable, but still capsizable.
Nice.👍
Those bins need drains! I didn't see any?
Aussie, Aussie, Aussie oy, oy, oy!🇦🇺
Is that 3k with the motor
will this boat be abel to be come to south africa
Very nice..
yeah whats the price as configured on the green one. 7995 plus guaranteed
Boat and motor is $6,000. Rail Blaza accesories is about $400. Navi Lights $179, Minn Kota $1,000, Garmin $299
I love it
Mel bch again 🌴 Personally a used Whaler 17 Montauk value wise great ! 🏄
Those are good but not as good as a rib though 😕😅
Deym thats masculine boat overthere! I hope I can see it soon selling to Asian countries.
lindo vídeo
I want to buy one,
Looks like a Coleman cooler
Awesome
THE TITANIC WAS UNSINKABLE ALSO !!!
How do you repair a hole or crack
Plastic weld and patches
I want the 410 challenger...
simple material to repair .......for ease of use singlehanded I cant think of anything else
are these polyethelene?
Look into the Whaly 210 it’s only 6 ft but it can fit in a pickup so no need for a trailer and it’s a lot lighter $1500 is half the cost there’s always cheaper options this really isn’t that affordable when you factor in a trailer and a motor nice vid tho they are cool boats scratch it just put a heat gun on it and it’s fixed lol
We sell Whaly boats as well. The 210 is a lot smaller though. 2 different boats completely
They want 52k+ for a 599 + Yamaha 150hp plus a 1-year wait + shipping LMAO!!! Bruh they are bananas .. They better step their game up and ship over some molds and print these jokers out here in America great idea but absolutely crazy pricing and wait time.